Julieta Barroeta Robles
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Julieta Barroeta Robles has a total of 49 co-authors. Here are the top co-authors by number of shared publications:
A. Yousefpour
National Research Council Canada, Aerospace Manufacturing Technologies Centre, Montréal
3 shared publicationsA. Beauchesne
2 shared publicationsB. Buhrkuhl
2 shared publications- Behnam Ashrafi
National Research Council Canada
2 shared publications C. Padioleau
2 shared publicationsD. Swope
2 shared publications
Latest Publications
- Open Access
- 12 July 2024
- Published by Wiley in Advanced Materials Technologies
- Vol. 9 (22)
Gradient‐Interpenetrating Polymer Networks in 3D Printed Lattices for Tunable and Enhanced Energy Absorption
3D printing provides the potential to enhance mechanical properties by fabricating complex structures with diverse materials; however, most high‐resolution 3D printing techniques require custom printers to incorporate multiple materials and/or result in poor material interfacial bonding. Here, energy absorption properties are enhanced with 3D lattice structures fabricated via vat photopolymerization comprising multiple materials forming a gradient‐interpenetrating polymer network (gradient‐IPN). The gradient‐IPN is incorporated by swelling the 3D printed elastomeric lattice in a photoresin that yields a stiff shell‐soft core structure. This straightforward post‐3D printing technique delivers an unprecedented degree of structural property customization through polymer gradients in lattice struts with shells of tunable stiffness and flexible elastomeric cores to achieve a broad continuum spectrum of mechanical properties within one simple system. The gradient aids in the distribution of stress and limits fracture between materials typically observed in multimaterial lattices. The gradient‐IPN lattices are fully recoverable and exhibit over 4 to 33 times higher toughness after compression, compared to copolymer (same composition as the gradient‐IPN) or purely elastomeric lattices, respectively. This highly versatile approach to modifying 3D printed lattices yields the unique combination of load bearing capabilities with viscoelasticity desirable for high performance materials in impact protection.
- 12 July 2024
- Published by Wiley in Advanced Materials Technologies
- Vol. 9 (22)
Open AccessGradient‐Interpenetrating Polymer Networks in 3D Printed Lattices for Tunable and Enhanced Energy Absorption
3D printing provides the potential to enhance mechanical properties by fabricating complex structures with diverse materials; however, most high‐resolution 3D printing techniques require custom printers to incorporate multiple materials and/or result in poor material interfacial bonding. Here, energy absorption properties are enhanced with 3D lattice structures fabricated via vat photopolymerization comprising multiple materials forming a gradient‐interpenetrating polymer network (gradient‐IPN). The gradient‐IPN is incorporated by swelling the 3D printed elastomeric lattice in a photoresin that yields a stiff shell‐soft core structure. This straightforward post‐3D printing technique delivers an unprecedented degree of structural property customization through polymer gradients in lattice struts with shells of tunable stiffness and flexible elastomeric cores to achieve a broad continuum spectrum of mechanical properties within one simple system. The gradient aids in the distribution of stress and limits fracture between materials typically observed in multimaterial lattices. The gradient‐IPN lattices are fully recoverable and exhibit over 4 to 33 times higher toughness after compression, compared to copolymer (same composition as the gradient‐IPN) or purely elastomeric lattices, respectively. This highly versatile approach to modifying 3D printed lattices yields the unique combination of load bearing capabilities with viscoelasticity desirable for high performance materials in impact protection.
- Open Access
- 1 July 2023
- Published by AIP Publishing in APL Materials
- Vol. 11 (7)
Additive manufacturing of polymer derived ceramics: Materials, methods, and applications
Owing to freedom of design, simplicity, and ability to handle complex structures, additive manufacturing (AM) or 3D printing of ceramics represents a promising enabling technology and has already been used to produce geometrically complex ceramic components and ceramic metamaterials. Consequently, novel applications for additively manufactured ceramics, which leverage their structural, high temperature, and chemical-resistant properties, have been proposed in areas ranging from electrical engineering and micro/nanoelectronics to chemical engineering to biology. Polymer derived ceramics (PDCs) represent a relatively new class of materials within additive manufacturing. PDCs enable the development of ceramic parts patterned via low-cost polymer 3D printing methods followed by pyrolysis in a high temperature process in which the polymer itself forms a ceramic often in the absence of any ceramic filler. PDCs have served as a feedstock for various 3D printing techniques for which a wide range of physiochemical factors can be tailored to optimize the ceramic manufacturing processes. In particular, the silicon and carbon-rich polymeric microstructure of PDCs offers a high degree of tunability and potential to achieve a closely defined combination of functional, thermomechanical, and chemical properties. In this review, we cover mechanisms underlying the design and manufacture of ceramics via 3D printing and pyrolysis of preceramic polymers, focusing on chemical formulations, printing technologies, and the mechanical performance of the ceramic network from microscale to scale. We also summarize experimental data from the literature and present qualitative and quantitative comparisons between different AM routes to provide a comprehensive review for 3D printing of PDCs and to highlight potential future research.
- 1 July 2023
- Published by AIP Publishing in APL Materials
- Vol. 11 (7)
Open AccessAdditive manufacturing of polymer derived ceramics: Materials, methods, and applications
Owing to freedom of design, simplicity, and ability to handle complex structures, additive manufacturing (AM) or 3D printing of ceramics represents a promising enabling technology and has already been used to produce geometrically complex ceramic components and ceramic metamaterials. Consequently, novel applications for additively manufactured ceramics, which leverage their structural, high temperature, and chemical-resistant properties, have been proposed in areas ranging from electrical engineering and micro/nanoelectronics to chemical engineering to biology. Polymer derived ceramics (PDCs) represent a relatively new class of materials within additive manufacturing. PDCs enable the development of ceramic parts patterned via low-cost polymer 3D printing methods followed by pyrolysis in a high temperature process in which the polymer itself forms a ceramic often in the absence of any ceramic filler. PDCs have served as a feedstock for various 3D printing techniques for which a wide range of physiochemical factors can be tailored to optimize the ceramic manufacturing processes. In particular, the silicon and carbon-rich polymeric microstructure of PDCs offers a high degree of tunability and potential to achieve a closely defined combination of functional, thermomechanical, and chemical properties. In this review, we cover mechanisms underlying the design and manufacture of ceramics via 3D printing and pyrolysis of preceramic polymers, focusing on chemical formulations, printing technologies, and the mechanical performance of the ceramic network from microscale to scale. We also summarize experimental data from the literature and present qualitative and quantitative comparisons between different AM routes to provide a comprehensive review for 3D printing of PDCs and to highlight potential future research.
- 21 April 2022
- Published by IOP Publishing in Bioinspiration & Biomimetics
- Vol. 17 (4) , 046006
Biomimetic bi-material designs for additive manufacturing
Superior material properties have been recently exhibited under the concept of biomimetic designs, where the material architectures are inspired by nature. In this study, a computational framework is developed to present novel architectured bi-material structures with tunable stiffness, strength, and toughness to be used for additive manufacturing (AM). The structure of natural nacre is mimicked to design robust multilayered structures constructed from hexagonal brittle and hard building blocks bonded with soft materials and supports. A set of computational models consisting of fully bonded zones, while allowing for interlayer interactions are created to accurately mimic the interplay between the hard and soft organic phases. As required for such complex designs, the numerical constraints are properly set to run quasi-static non-linear explicit analysis, which allow for a 3× faster analysis with higher efficiency and 2× lower computational cost, when compared to static analysis. The models are used to assess the stiffness, strength and toughness of bi-material beams when subjected to a flexural three-point bending load. The influence of structural features like the soft-to-hard volume ratio (i.e. the distance between each building block, its aspect ratio, and overlap length), material features (e.g. the stiffness ratio of the hard-to-soft phases), the plastic strain failure of soft phase, and AM features (e.g. different types of within-layer/sandwiched supports) are systematically investigated. The results revealed that the toughness of the architectured beams was enhanced by up to 25% when compared to a monolithic structure. This improvement is due to the frictional tile sliding in the brittle phase and the extensive shear plastic deformation of the soft interfaces. This work provides compatible designs to facilitate the AM of nacre-based bi-martial structures with balanced/tailored mechanical performance and to understand the influence of the architectural parameters.
- 21 April 2022
- Published by IOP Publishing in Bioinspiration & Biomimetics
- Vol. 17 (4) , 046006
Biomimetic bi-material designs for additive manufacturing
Superior material properties have been recently exhibited under the concept of biomimetic designs, where the material architectures are inspired by nature. In this study, a computational framework is developed to present novel architectured bi-material structures with tunable stiffness, strength, and toughness to be used for additive manufacturing (AM). The structure of natural nacre is mimicked to design robust multilayered structures constructed from hexagonal brittle and hard building blocks bonded with soft materials and supports. A set of computational models consisting of fully bonded zones, while allowing for interlayer interactions are created to accurately mimic the interplay between the hard and soft organic phases. As required for such complex designs, the numerical constraints are properly set to run quasi-static non-linear explicit analysis, which allow for a 3× faster analysis with higher efficiency and 2× lower computational cost, when compared to static analysis. The models are used to assess the stiffness, strength and toughness of bi-material beams when subjected to a flexural three-point bending load. The influence of structural features like the soft-to-hard volume ratio (i.e. the distance between each building block, its aspect ratio, and overlap length), material features (e.g. the stiffness ratio of the hard-to-soft phases), the plastic strain failure of soft phase, and AM features (e.g. different types of within-layer/sandwiched supports) are systematically investigated. The results revealed that the toughness of the architectured beams was enhanced by up to 25% when compared to a monolithic structure. This improvement is due to the frictional tile sliding in the brittle phase and the extensive shear plastic deformation of the soft interfaces. This work provides compatible designs to facilitate the AM of nacre-based bi-martial structures with balanced/tailored mechanical performance and to understand the influence of the architectural parameters.
- Open Access
- 3 April 2022
- Published by Taylor & Francis in Advanced Manufacturing: Polymer & Composites Science
- Vol. 8 (2) , 68-96
Repair of thermoplastic composites: an overview
An extensive review of literature is conducted to present the evolution of the field of repair of thermoplastic composites (TPC’s) from when it was first mentioned in 1980. The TPC materials used today in aerospace structures are introduced along with the existing challenges to repair TPC structures. The three most promising fusion bonding techniques to address these challenges (i.e. induction, resistance, and ultrasonic welding) are explained. The certification authorities have extensive knowledge and data for repair of thermoset polymer matrix composite structures. However, such level of knowledge is highly limited for TPC structures. A lack of robust processes and the overall lack of data on TPC’s when compared to their thermoset counterparts are challenges that need to be addressed to implement TPC materials in aircraft structures. GRAPHICAL ABSTRACT
- 3 April 2022
- Published by Taylor & Francis in Advanced Manufacturing: Polymer & Composites Science
- Vol. 8 (2) , 68-96
Open AccessRepair of thermoplastic composites: an overview
An extensive review of literature is conducted to present the evolution of the field of repair of thermoplastic composites (TPC’s) from when it was first mentioned in 1980. The TPC materials used today in aerospace structures are introduced along with the existing challenges to repair TPC structures. The three most promising fusion bonding techniques to address these challenges (i.e. induction, resistance, and ultrasonic welding) are explained. The certification authorities have extensive knowledge and data for repair of thermoset polymer matrix composite structures. However, such level of knowledge is highly limited for TPC structures. A lack of robust processes and the overall lack of data on TPC’s when compared to their thermoset counterparts are challenges that need to be addressed to implement TPC materials in aircraft structures. GRAPHICAL ABSTRACT
- Open Access
- 1 January 2020
- Published by Society for the Advancement of Material and Process Engineering - SAMPE
Enabling Responsive Real-Time Inspection of the Automated Fiber Placement Process
- 1 January 2020
- Published by Society for the Advancement of Material and Process Engineering - SAMPE
Open AccessEnabling Responsive Real-Time Inspection of the Automated Fiber Placement Process