Kai Xu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Kai Xu has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Stephen McLaughlin
Heriot-Watt University
4 shared publications - Yuan Ding
Heriot-Watt University
4 shared publications - George Goussetis
Heriot-Watt University
3 shared publications - Chaoyun Song
Shenzhen University
2 shared publications - John S. Thompson
Institute for Imaging, Data and Communications, School of Engineering, University of Edinburgh, Edinburgh, U.K.
2 shared publications - Wei Gong
University of Science and Technology of China
2 shared publications
Latest Publications
- 15 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Information Forensics and Security
- Vol. 19 (15566013) , 5015-5029
PUF-Assisted Radio Frequency Fingerprinting Exploiting Power Amplifier Active Load-Pulling
This paper presents a novel radio frequency fingerprint (RFF) enhancement strategy by exploiting the physical unclonable function (PUF) to tune the RF hardware impairments in a unique and secure manner, which is exemplified by taking power amplifiers (PAs) in RF chains as an example. This is achieved by intentionally and slightly tuning the PA non-linearity characteristics using the active load-pulling technique. The motivation driving the proposed research is to enlarge the RFF feature differences among wireless devices of same vendor, in order to massively improve their RFF classification accuracy in low to medium signal to noise ratio (SNR) channel conditions. PUF is employed to dynamically tune the PA’s RFF feature which guarantees the security since the PUF response cannot be cloned. Specifically, a ring oscillator (RO)-based PUF is implemented to control the PA non-linearity by selecting unique but random configuration parameters. This approach is proposed to amplify the distinctions across same model PAs, thereby enhancing the RFF classification performance. In the meantime, our innovative strategy of PUF-assisted RFF does not noticeably compromise communication link performance which is experimentally tested. The resulting RFF features can be extracted from the received distorted constellation diagrams with the help of image recognition-based machine learning classification algorithms. Extensive experimental evaluations are carried out using both cable-connected and over-the-air (OTA) measurements. Our proposed approach, when classifying eight PAs from a same vendor, achieves 11% to 24% average classification accuracy improvement by enlarging the RFF feature differences arising from the PA non-linearity.
- 15 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Information Forensics and Security
- Vol. 19 (15566013) , 5015-5029
PUF-Assisted Radio Frequency Fingerprinting Exploiting Power Amplifier Active Load-Pulling
This paper presents a novel radio frequency fingerprint (RFF) enhancement strategy by exploiting the physical unclonable function (PUF) to tune the RF hardware impairments in a unique and secure manner, which is exemplified by taking power amplifiers (PAs) in RF chains as an example. This is achieved by intentionally and slightly tuning the PA non-linearity characteristics using the active load-pulling technique. The motivation driving the proposed research is to enlarge the RFF feature differences among wireless devices of same vendor, in order to massively improve their RFF classification accuracy in low to medium signal to noise ratio (SNR) channel conditions. PUF is employed to dynamically tune the PA’s RFF feature which guarantees the security since the PUF response cannot be cloned. Specifically, a ring oscillator (RO)-based PUF is implemented to control the PA non-linearity by selecting unique but random configuration parameters. This approach is proposed to amplify the distinctions across same model PAs, thereby enhancing the RFF classification performance. In the meantime, our innovative strategy of PUF-assisted RFF does not noticeably compromise communication link performance which is experimentally tested. The resulting RFF features can be extracted from the received distorted constellation diagrams with the help of image recognition-based machine learning classification algorithms. Extensive experimental evaluations are carried out using both cable-connected and over-the-air (OTA) measurements. Our proposed approach, when classifying eight PAs from a same vendor, achieves 11% to 24% average classification accuracy improvement by enlarging the RFF feature differences arising from the PA non-linearity.
- 27 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (9) , 5563-5575
FM Rider: Two-FSK Modulation-Based Ambient FM Backscatter Over 100 m Distance
Backscatter communication (BackCom) technology represents a low-cost and battery-free technology for Internet-of-Things (IoT) applications. One variant of BackCom, termed as ambient BackCom, which uses ambient signals to eliminate the need for a dedicated carrier source is more advantageous due to reduced system complexity and cost. Previous studies on ambient BackCom have primarily relied on amplitude modulation-based systems like on–off-keying (OOK) modulation, which achieved a maximum tag-to-receiver (Rx) distance of less than five meters. Alternatively, frequency-shift-keying (FSK)-based ambient BackCom systems have demonstrated improved distance, but with limitations. This work introduces an ambient broadcast frequency-modulation (FM) BackCom system utilizing in-band 2FSK-based modulation, designed to be compatible with both mono and stereo radio systems and extend communication distance. In order to successfully detect the backscatter 2FSK symbols, two pivotal technologies are employed: first, a quadrature demod-based in-phase/quadrature ( $I$ / $Q$ ) sample processing method enhances the signal-to-interference-plus-noise ratio (SINR). This enhancement has been substantiated through theoretical analysis, simulations, and cable-connected experiments. Second, a moving window-based 2FSK demodulation strategy is implemented, exhibiting resilience to tag frequency instability. The proposed system significantly enhances the tag-to-Rx communication distance, achieving an impressive range of over 100 m, a considerable improvement over the current state-of-the-art. The performance of the proposed system is evaluated in both cable-connected and outdoor environments, achieving a maximum bit rate of 333 bits per second (bps) at a distance of 58 m and a maximum communication distance of 107 m at a bit rate of 200 bps.
- 27 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (9) , 5563-5575
FM Rider: Two-FSK Modulation-Based Ambient FM Backscatter Over 100 m Distance
Backscatter communication (BackCom) technology represents a low-cost and battery-free technology for Internet-of-Things (IoT) applications. One variant of BackCom, termed as ambient BackCom, which uses ambient signals to eliminate the need for a dedicated carrier source is more advantageous due to reduced system complexity and cost. Previous studies on ambient BackCom have primarily relied on amplitude modulation-based systems like on–off-keying (OOK) modulation, which achieved a maximum tag-to-receiver (Rx) distance of less than five meters. Alternatively, frequency-shift-keying (FSK)-based ambient BackCom systems have demonstrated improved distance, but with limitations. This work introduces an ambient broadcast frequency-modulation (FM) BackCom system utilizing in-band 2FSK-based modulation, designed to be compatible with both mono and stereo radio systems and extend communication distance. In order to successfully detect the backscatter 2FSK symbols, two pivotal technologies are employed: first, a quadrature demod-based in-phase/quadrature ( $I$ / $Q$ ) sample processing method enhances the signal-to-interference-plus-noise ratio (SINR). This enhancement has been substantiated through theoretical analysis, simulations, and cable-connected experiments. Second, a moving window-based 2FSK demodulation strategy is implemented, exhibiting resilience to tag frequency instability. The proposed system significantly enhances the tag-to-Rx communication distance, achieving an impressive range of over 100 m, a considerable improvement over the current state-of-the-art. The performance of the proposed system is evaluated in both cable-connected and outdoor environments, achieving a maximum bit rate of 333 bits per second (bps) at a distance of 58 m and a maximum communication distance of 107 m at a bit rate of 200 bps.
- Open Access
- 6 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 3, 2461-2471
Reconfigurable Power Divider-Enabled Dynamic Hybrid m-MIMO Transmitter
A promising solution for massive Multiple-Input Multiple-Output (m-MIMO) systems is Hybrid digital-analogue (HDA) beamforming as it offers a balanced trade-off between energy efficiency (EE) and spectral efficiency (SE). The lack of practical demonstrations in the open literature is primarily because those most existing works require a large number of phase shifters (PSs), radio frequency (RF) switches, power dividers (PDs), and power combiners which contribute to high hardware complexity and energy consumption (due to insertion loss). In this paper, we introduce a practical dynamic subarray m-MIMO structure that is based on reconfigurable power dividers (RPDs). The extensive system simulation results, considering hardware imperfection extracted from a practical RPD implementation, indicate that the proposed RPD-based dynamic HDA m-MIMO outperforms the fixed subarray counterpart.
- 6 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 3, 2461-2471
Open AccessReconfigurable Power Divider-Enabled Dynamic Hybrid m-MIMO Transmitter
A promising solution for massive Multiple-Input Multiple-Output (m-MIMO) systems is Hybrid digital-analogue (HDA) beamforming as it offers a balanced trade-off between energy efficiency (EE) and spectral efficiency (SE). The lack of practical demonstrations in the open literature is primarily because those most existing works require a large number of phase shifters (PSs), radio frequency (RF) switches, power dividers (PDs), and power combiners which contribute to high hardware complexity and energy consumption (due to insertion loss). In this paper, we introduce a practical dynamic subarray m-MIMO structure that is based on reconfigurable power dividers (RPDs). The extensive system simulation results, considering hardware imperfection extracted from a practical RPD implementation, indicate that the proposed RPD-based dynamic HDA m-MIMO outperforms the fixed subarray counterpart.
- Open Access
- 13 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 40794-40805
Joint Digital Analogue DVB-S2(X) Link Optimization in Non-Linear Channel
Future broadband satellite communication (SatCom) systems require a high throughput of data transmission, which calls for operation at higher frequency bands. Adaptive coding and modulation (ACM) technology has been considered as a means to obtain improved performance further at these frequencies. However, the ACM protocols in current DVB-S2 and DVB-S2(X) standards do not take the effects that arise from the non-linear link with memory into account, which is generated by the cascade of a high-power amplifier (HPA) and digital root raised cosine (RRC) filters. This paper first reveals the non-linear characteristics of the SatCom link, and transfers this into an equivalent full-linear link with an additive noise source thanks to the pre-distortion algorithm. Using this equivalent modeling, an approach of selecting/adapting the optimum coding, modulation scheme and associated system configurations for a given channel fading level is proposed. Both simulations and experimental test-bed performance are presented to validate the proposed method.
- 13 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 40794-40805
Open AccessJoint Digital Analogue DVB-S2(X) Link Optimization in Non-Linear Channel
Future broadband satellite communication (SatCom) systems require a high throughput of data transmission, which calls for operation at higher frequency bands. Adaptive coding and modulation (ACM) technology has been considered as a means to obtain improved performance further at these frequencies. However, the ACM protocols in current DVB-S2 and DVB-S2(X) standards do not take the effects that arise from the non-linear link with memory into account, which is generated by the cascade of a high-power amplifier (HPA) and digital root raised cosine (RRC) filters. This paper first reveals the non-linear characteristics of the SatCom link, and transfers this into an equivalent full-linear link with an additive noise source thanks to the pre-distortion algorithm. Using this equivalent modeling, an approach of selecting/adapting the optimum coding, modulation scheme and associated system configurations for a given channel fading level is proposed. Both simulations and experimental test-bed performance are presented to validate the proposed method.