Yinyan Shi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yinyan Shi has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
- Xiaochan Wang
College of Engineering, Nanjing Agricultural University, Nanjing 210031, China
11 shared publications - S. Hu
Nanjing Agricultural University
4 shared publications - Xuekai Huang
Nanjing Agricultural University
4 shared publications - J. Wang
Nanjing Agricultural University
3 shared publications - Zhao Zhang
College of Information and Electrical Engineering, China Agricultural University, Beijing 100083, China
3 shared publications - C. Xia
Nanjing Agricultural University
2 shared publications
Latest Publications
- Open Access
A Novel Dual-Index Analysis Method for Quantifying Fish School Feeding Intensity Using Average Swimming Speed and Feeding Aggregation Speed
Accurate identification and quantitative assessment of fish feeding intensity are pivotal for enhancing aquaculture production efficiency. Currently, feeding intensity is mainly assessed based on fish school feeding images with a single feature, overlooking the interdependencies between individual fish and the fish school’s behavior. Therefore, this paper presents a method based on detecting individual fish heads to characterize the feeding aggregation speed and the average swimming speed of the fish school, thereby quantifying the fish school’s feeding intensity. First, the improved YOLOv11n-ALL model was employed to detect individual fish heads, resulting in improved detection performance, increasing inference speed, and reducing computational complexity. Additionally, feeding aggregation speed and average swimming speed indices for fish schools were constructed by combining the YOLOv11n-ALL model with the ByteTrack algorithm to track and extract the centers of individual fish heads’ detection boxes. Finally, the fish school feeding kinetic energy was assessed using the feeding aggregation speed and average swimming speed dual indices, and the fish school feeding intensity levels were classified according to the feeding kinetic energy. Experimental results reveal that the improved YOLOv11n-ALL model achieved an average detection precision (mAP50) of 94.13% for detecting fish heads, reduced the parameter count by 22.09%, and exhibited a computational complexity of 6.4 GFLOPs. Furthermore, the classification model of fish school feeding intensity, quantified by the dual indices of average swimming speed and feeding aggregation speed, achieved a detection accuracy of 97.41%. This method digitizes detection results, enabling rapid classification of fish school feeding intensity and demonstrating its effectiveness for feeding intensity assessment and the development of scientific feeding strategies.
Open AccessA Novel Dual-Index Analysis Method for Quantifying Fish School Feeding Intensity Using Average Swimming Speed and Feeding Aggregation Speed
Accurate identification and quantitative assessment of fish feeding intensity are pivotal for enhancing aquaculture production efficiency. Currently, feeding intensity is mainly assessed based on fish school feeding images with a single feature, overlooking the interdependencies between individual fish and the fish school’s behavior. Therefore, this paper presents a method based on detecting individual fish heads to characterize the feeding aggregation speed and the average swimming speed of the fish school, thereby quantifying the fish school’s feeding intensity. First, the improved YOLOv11n-ALL model was employed to detect individual fish heads, resulting in improved detection performance, increasing inference speed, and reducing computational complexity. Additionally, feeding aggregation speed and average swimming speed indices for fish schools were constructed by combining the YOLOv11n-ALL model with the ByteTrack algorithm to track and extract the centers of individual fish heads’ detection boxes. Finally, the fish school feeding kinetic energy was assessed using the feeding aggregation speed and average swimming speed dual indices, and the fish school feeding intensity levels were classified according to the feeding kinetic energy. Experimental results reveal that the improved YOLOv11n-ALL model achieved an average detection precision (mAP50) of 94.13% for detecting fish heads, reduced the parameter count by 22.09%, and exhibited a computational complexity of 6.4 GFLOPs. Furthermore, the classification model of fish school feeding intensity, quantified by the dual indices of average swimming speed and feeding aggregation speed, achieved a detection accuracy of 97.41%. This method digitizes detection results, enabling rapid classification of fish school feeding intensity and demonstrating its effectiveness for feeding intensity assessment and the development of scientific feeding strategies.
- 15 February 2026
- Published by Springer Nature
- p. 195-231
Field Evaluation and Efficiency Analysis of Centrifugal Variable-Rate Fertilization in Precision Agriculture
- 15 February 2026
- Published by Springer Nature
- p. 195-231
Field Evaluation and Efficiency Analysis of Centrifugal Variable-Rate Fertilization in Precision Agriculture
- 15 February 2026
- Published by Springer Nature
- p. 75-94
Design and Modeling of the Centrifugal Variable-Rate Fertilizer Spreader
- 15 February 2026
- Published by Springer Nature
- p. 75-94
Design and Modeling of the Centrifugal Variable-Rate Fertilizer Spreader
- 15 February 2026
- Published by Springer Nature
- p. 95-118
Mechanical Properties of Fertilizer Particles and Crop Straw Under Discrete Element Modeling
- 15 February 2026
- Published by Springer Nature
- p. 95-118
Mechanical Properties of Fertilizer Particles and Crop Straw Under Discrete Element Modeling
- 15 February 2026
- Published by Springer Nature
- p. 1-41
Progress and Development on Biological Information of Crop Phenotype Research Applied to Real-Time Variable-Rate Fertilization
- 15 February 2026
- Published by Springer Nature
- p. 1-41
Progress and Development on Biological Information of Crop Phenotype Research Applied to Real-Time Variable-Rate Fertilization
- 15 February 2026
- Published by Springer Nature
- p. 171-193
Research on Fertilizer Discharge Flow Rate Detection System
- 15 February 2026
- Published by Springer Nature
- p. 171-193
Research on Fertilizer Discharge Flow Rate Detection System
- Open Access
- 29 October 2025
- Published by MDPI AG in Agriculture
- Vol. 15 (21) , 2256
DEM-CFD Simulation of Organic–Inorganic Fertiliser Mixing-Spreading: Optimizing Inorganic Fertiliser Placement for Uniformity
Organic–inorganic compound fertilizer application technology is a key technology for chemical fertilizer efficiency improvement, and stable grain yield increase. However, current agricultural machinery is unable to achieve uniform application of both organic and inorganic fertilisers. This study has compared two modeling methods and optimally selected the EDEM-Fluent coupled method. It aims to investigate the mechanism by which four factors—namely inorganic fertilizer drop location (Polar angle: −80° to 80°, polar radius: 60 mm to 180 mm), organic fertilizer flow rate (875–3500 g·s−1), inorganic fertilizer proportion (10–50%), and fertilizer spreading disc rotational speed (300–700 r·min−1)—influence inorganic fertilizer uniformity. A Box–Behnken test was designed with the pole angle and pole diameter of the drop location, organic fertiliser flow rate, spreading disc rotational speed, and coefficient of variation in the uniformity of the inorganic fertilisers as indexes. The Box–Behnken test divided the fertiliser drop location into left and right parts and established a mathematical model of fertiliser drop location, rotational speed, and organic fertiliser flow rate. Finally, the predictive performance of the model was verified in the field by testing four scenarios: low speed–low flow rate, low speed–high flow rate, high speed–low flow rate, and high speed–high flow rate. The root mean square error (RMSE) between the EDEM-Fluent coupled test and the bench test is 1.53, which is better than the RMSE (2.55) between the EDEM test and the bench test. Before optimization, the coefficients of variationof inorganic fertilizer (ICV) under four operating conditions were 28.93%, 32.43%, 38.17%, and 29.32% respectively. After optimization, the corresponding values were 19.34%, 23.78%, 21.45%, and 23.10% respectively. Compared with the pre-optimization results, the organic fertilizer coefficient of variation (OCV) remained stable, while the inorganic fertilizer coefficient of variation (ICV) decreased by an average of 10.29%. This study greatly improved the uniformity of inorganic fertiliser in the organic–inorganic spreader and provides a basis for subsequent intelligent spreaders.
- 29 October 2025
- Published by MDPI AG in Agriculture
- Vol. 15 (21) , 2256
Open AccessDEM-CFD Simulation of Organic–Inorganic Fertiliser Mixing-Spreading: Optimizing Inorganic Fertiliser Placement for Uniformity
Organic–inorganic compound fertilizer application technology is a key technology for chemical fertilizer efficiency improvement, and stable grain yield increase. However, current agricultural machinery is unable to achieve uniform application of both organic and inorganic fertilisers. This study has compared two modeling methods and optimally selected the EDEM-Fluent coupled method. It aims to investigate the mechanism by which four factors—namely inorganic fertilizer drop location (Polar angle: −80° to 80°, polar radius: 60 mm to 180 mm), organic fertilizer flow rate (875–3500 g·s−1), inorganic fertilizer proportion (10–50%), and fertilizer spreading disc rotational speed (300–700 r·min−1)—influence inorganic fertilizer uniformity. A Box–Behnken test was designed with the pole angle and pole diameter of the drop location, organic fertiliser flow rate, spreading disc rotational speed, and coefficient of variation in the uniformity of the inorganic fertilisers as indexes. The Box–Behnken test divided the fertiliser drop location into left and right parts and established a mathematical model of fertiliser drop location, rotational speed, and organic fertiliser flow rate. Finally, the predictive performance of the model was verified in the field by testing four scenarios: low speed–low flow rate, low speed–high flow rate, high speed–low flow rate, and high speed–high flow rate. The root mean square error (RMSE) between the EDEM-Fluent coupled test and the bench test is 1.53, which is better than the RMSE (2.55) between the EDEM test and the bench test. Before optimization, the coefficients of variationof inorganic fertilizer (ICV) under four operating conditions were 28.93%, 32.43%, 38.17%, and 29.32% respectively. After optimization, the corresponding values were 19.34%, 23.78%, 21.45%, and 23.10% respectively. Compared with the pre-optimization results, the organic fertilizer coefficient of variation (OCV) remained stable, while the inorganic fertilizer coefficient of variation (ICV) decreased by an average of 10.29%. This study greatly improved the uniformity of inorganic fertiliser in the organic–inorganic spreader and provides a basis for subsequent intelligent spreaders.
- Open Access
Salinity Stress in Strawberry Seedlings Determined with a Spectral Fusion Model
This article discusses the salt stress in strawberry seedlings under greenhouse conditions in summer. Spectral acquisition equipment was used to obtain spectral data, and the ambient and leaf temperatures were combined to model and analyze the relative chlorophyll content in the strawberry seedling leaves. Four different salt gradients were employed to culture the strawberry seedings: S1 (0 mmol/L NaCl), S2 (50 mmol/L NaCl), S3 (100 mmol/L NaCl), and S4 (150 mmol/L NaCl). The results indicated that the spectral curves of the strawberry seedlings in groups S3 and S4 began to differentiate after day 3 (D3), and their average canopy temperature increased by 2.5 °C and 3.1 °C, respectively. The performance of traditional machine learning models integrating leaf temperature improved by more than 80%. Under each stress treatment, the one-dimensional ResNet model integrated with leaf temperature performed the best, with root mean square and mean absolute errors below 1.7 and 1.5, respectively. These results highlight the potential of incorporating temperature as an additional factor to improve the accuracy of plant stress assessments. By integrating temperature with spectral data, the model enhances the ability to monitor plant health dynamically and provides a more comprehensive understanding of how environmental factors influence plant physiology.
Open AccessSalinity Stress in Strawberry Seedlings Determined with a Spectral Fusion Model
This article discusses the salt stress in strawberry seedlings under greenhouse conditions in summer. Spectral acquisition equipment was used to obtain spectral data, and the ambient and leaf temperatures were combined to model and analyze the relative chlorophyll content in the strawberry seedling leaves. Four different salt gradients were employed to culture the strawberry seedings: S1 (0 mmol/L NaCl), S2 (50 mmol/L NaCl), S3 (100 mmol/L NaCl), and S4 (150 mmol/L NaCl). The results indicated that the spectral curves of the strawberry seedlings in groups S3 and S4 began to differentiate after day 3 (D3), and their average canopy temperature increased by 2.5 °C and 3.1 °C, respectively. The performance of traditional machine learning models integrating leaf temperature improved by more than 80%. Under each stress treatment, the one-dimensional ResNet model integrated with leaf temperature performed the best, with root mean square and mean absolute errors below 1.7 and 1.5, respectively. These results highlight the potential of incorporating temperature as an additional factor to improve the accuracy of plant stress assessments. By integrating temperature with spectral data, the model enhances the ability to monitor plant health dynamically and provides a more comprehensive understanding of how environmental factors influence plant physiology.
- 31 August 2024
- Published by INMA Bucharest-Romania in INMATEH Agricultural Engineering
- Vol. 73 (2) , 581-591
EFFICIENCY ANALYSIS AND EVALUATION OF VARIABLE FERTILIZER SPREADING BASED ON REALTIME SPECTRAL INFORMATION ON WHEAT
Studying the effect of variable fertilization during the jointing stage on winter wheat production in the rice-wheat rotation area is critical for evaluating the application effect and economic benefits of variable fertilization technology. The variable fertilization experiment of wheat was carried out in Jiangsu province by using the self-developed fertilizer applicator. Three fertilization methods were used to conduct a comparative analysis of the fertilization amount, population structure, and yield of winter wheat during the jointing stage. On this basis, the economic feasibility of variable fertilization during the jointing stage was evaluated. The experimental results showed that the control accuracy of variable-rate fertilization with fertilization equipment was greater than 95%. After variable fertilization, the coefficient of variation of NDVI values in the winter wheat canopy spectral data remained between 0.076 and 0.125, and the Christensen uniformity coefficient remained between 0.901 and 0.940. Compared with the traditional empirical balance method for quantitative fertilization of plots, the real-time variable fertilization plot used 13.6 kg/hm2 less fertilizer during the jointing stage. The findings validate that implementing variable fertilization can help reduce nitrogen fertilizer input, improve nitrogen fertilizer utilization efficiency, reduce environmental pollution, and enhance the sustainability of agricultural production.
- 31 August 2024
- Published by INMA Bucharest-Romania in INMATEH Agricultural Engineering
- Vol. 73 (2) , 581-591
EFFICIENCY ANALYSIS AND EVALUATION OF VARIABLE FERTILIZER SPREADING BASED ON REALTIME SPECTRAL INFORMATION ON WHEAT
Studying the effect of variable fertilization during the jointing stage on winter wheat production in the rice-wheat rotation area is critical for evaluating the application effect and economic benefits of variable fertilization technology. The variable fertilization experiment of wheat was carried out in Jiangsu province by using the self-developed fertilizer applicator. Three fertilization methods were used to conduct a comparative analysis of the fertilization amount, population structure, and yield of winter wheat during the jointing stage. On this basis, the economic feasibility of variable fertilization during the jointing stage was evaluated. The experimental results showed that the control accuracy of variable-rate fertilization with fertilization equipment was greater than 95%. After variable fertilization, the coefficient of variation of NDVI values in the winter wheat canopy spectral data remained between 0.076 and 0.125, and the Christensen uniformity coefficient remained between 0.901 and 0.940. Compared with the traditional empirical balance method for quantitative fertilization of plots, the real-time variable fertilization plot used 13.6 kg/hm2 less fertilizer during the jointing stage. The findings validate that implementing variable fertilization can help reduce nitrogen fertilizer input, improve nitrogen fertilizer utilization efficiency, reduce environmental pollution, and enhance the sustainability of agricultural production.