Shiyue Zhu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shiyue Zhu has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Bin Lin
School of Mechanical and Electrical Engineering, University of Electronic Science and Technology of China, Chengdu 611731, China
3 shared publications - Dong Tian
Anhui Key Laboratory of Low-Temperature Co-Fired Material, Huainan Engineering Research Center for Fuel Cells, Huainan Normal University, Huainan 232001, China
3 shared publications - Yonghong Chen
Anhui Key Laboratory of Low-Temperature Co-Fired Material, Huainan Engineering Research Center for Fuel Cells, Huainan Normal University, Huainan 232001, China
3 shared publications - Birkneh Sirak Teketel
School of Mechanical and Electrical Engineering, School of Materials and Energy, University of Electronic Science and Technology of China, Chengdu 611731, China
2 shared publications Dong Tian
Anhui Key Laboratory of Low Temperature Co-fired Materials, Huainan Normal University, Huainan, China
2 shared publications- Halefom G. Desta
School of Mechanical and Electrical Engineering, School of Materials and Energy, University of Electronic Science and Technology of China, Chengdu 611731, China
2 shared publications
Latest Publications
- 26 October 2024
- Published by Springer Nature in Journal of Solid State Electrochemistry
- Vol. 29 (5) , 1743-1754
Enhanced performance of Sr2Fe1.5Mo0.5O6-δ electrode by infiltrating dual functional barium carbonate nanoparticles in symmetrical SOFCs
- 26 October 2024
- Published by Springer Nature in Journal of Solid State Electrochemistry
- Vol. 29 (5) , 1743-1754
Enhanced performance of Sr2Fe1.5Mo0.5O6-δ electrode by infiltrating dual functional barium carbonate nanoparticles in symmetrical SOFCs
- 28 April 2024
- Published by Springer Nature in Journal of Solid State Electrochemistry
- Vol. 28 (6) , 1763-1772
Enhanced electrode reaction for La0.8Sr0.2FeO3-δ-Sm0.2Ce0.8O1.9 composite cathode by barium carbonate nanoparticles as a synergistic catalyst
- 28 April 2024
- Published by Springer Nature in Journal of Solid State Electrochemistry
- Vol. 28 (6) , 1763-1772
Enhanced electrode reaction for La0.8Sr0.2FeO3-δ-Sm0.2Ce0.8O1.9 composite cathode by barium carbonate nanoparticles as a synergistic catalyst
- Open Access
BaCO3 Nanoparticles-Modified Composite Cathode with Improved Electrochemical Oxygen Reduction Kinetics for High-Performing Ceramic Fuel Cells
The effects of the electrochemical oxygen reduction reaction (ORR) on the surface of single-phase perovskite cathodes are well understood, but its potential for use in a complex system consisting of different material types is unexplored. Herein, we report how BaCO3 nanoparticles-modified La0.6Sr0.4Co0.2Fe0.8O3-δ-Gd0.2Ce0.8O2-δ (LSCF–GDC)-composite cathodes improved the electrochemical oxygen reduction kinetics for high-performing ceramic fuel cells. Both X-ray diffraction (XRD) and thermogravimetric analysis (TGA) studies reveal that BaCO3 is stable, and that it does not show any solid-state reaction with LSCF–GDC at SOFCs’ required operating temperature. The electrochemical conductivity relaxation (ECR) study reveals that during the infiltration of BaCO3 nanoparticles into LSCF–GDC, the surface exchange kinetics (Kchem) are enhanced up to a factor of 26.73. The maximum power density of the NiO-YSZ anode-support cell is increased from 1.08 to 1.48 W/cm2 via surface modification at 750 °C. The modified cathode also shows an ultralow polarization resistance (Rp) of 0.027 Ω.cm2, which is ~4.4 times lower than that of the bare cathode (~0.12 Ω.cm2) at 750 °C. Such enhancement can be attributed to the accelerated oxygen surface exchange process, possibly through promoting the dissociation of oxygen molecules via the infiltration of BaCO3 nanoparticles. The density functional theory (DFT) illustrates the interaction mechanism between oxygen molecules and the BaCO3 surface.
Open AccessBaCO3 Nanoparticles-Modified Composite Cathode with Improved Electrochemical Oxygen Reduction Kinetics for High-Performing Ceramic Fuel Cells
The effects of the electrochemical oxygen reduction reaction (ORR) on the surface of single-phase perovskite cathodes are well understood, but its potential for use in a complex system consisting of different material types is unexplored. Herein, we report how BaCO3 nanoparticles-modified La0.6Sr0.4Co0.2Fe0.8O3-δ-Gd0.2Ce0.8O2-δ (LSCF–GDC)-composite cathodes improved the electrochemical oxygen reduction kinetics for high-performing ceramic fuel cells. Both X-ray diffraction (XRD) and thermogravimetric analysis (TGA) studies reveal that BaCO3 is stable, and that it does not show any solid-state reaction with LSCF–GDC at SOFCs’ required operating temperature. The electrochemical conductivity relaxation (ECR) study reveals that during the infiltration of BaCO3 nanoparticles into LSCF–GDC, the surface exchange kinetics (Kchem) are enhanced up to a factor of 26.73. The maximum power density of the NiO-YSZ anode-support cell is increased from 1.08 to 1.48 W/cm2 via surface modification at 750 °C. The modified cathode also shows an ultralow polarization resistance (Rp) of 0.027 Ω.cm2, which is ~4.4 times lower than that of the bare cathode (~0.12 Ω.cm2) at 750 °C. Such enhancement can be attributed to the accelerated oxygen surface exchange process, possibly through promoting the dissociation of oxygen molecules via the infiltration of BaCO3 nanoparticles. The density functional theory (DFT) illustrates the interaction mechanism between oxygen molecules and the BaCO3 surface.
- Open Access
- 31 May 2022
- Published by MDPI AG in Micromachines
- Vol. 13 (6) , 884
Enhanced Performance of La0.8Sr0.2FeO3-δ-Gd0.2Ce0.8O2-δ Cathode for Solid Oxide Fuel Cells by Surface Modification with BaCO3 Nanoparticles
Recently, Fe-based perovskite oxides, such as Ln1-xSrxFeO3-δ (Ln = La, Pr, Nd, Sm, Eu) have been proposed as potential alternative electrode materials for solid oxide fuel cells (SOFCs), due to their good phase stability, electrocatalytic activity, and low cost. This work presents the catalytic effect of BaCO3 nanoparticles modified on a cobalt-free La0.8Sr0.2FeO3-δ-Gd0.2Ce0.8O2-δ (LSF-GDC) composite cathode at an intermediate-temperature (IT)-SOFC. An electrochemical conductivity relaxation investigation (ECR) shows that the Kchem value of the modified LSF-GDC improves up to a factor of 17.47, demonstrating that the oxygen reduction process is effectively enhanced after surface impregnation by BaCO3. The area-specific resistance (ASR) of the LSF-GDC cathode, modified with 9.12 wt.% BaCO3, is 0.1 Ω.cm2 at 750 °C, which is about 2.2 times lower than that of the bare cathode (0.22 Ω.cm2). As a result, the anode-supported single cells, with the modified LSF-GDC cathode, deliver a high peak power density of 993 mW/cm2 at 750 °C, about 39.5% higher than that of the bare cell (712 mW/cm2). The single cells based on the modified cathode also displayed good performance stability for about 100 h at 700 °C. This study demonstrates the effectiveness of BaCO3 nanoparticles for improving the performance of IT-SOFC cathode materials.
- 31 May 2022
- Published by MDPI AG in Micromachines
- Vol. 13 (6) , 884
Open AccessEnhanced Performance of La0.8Sr0.2FeO3-δ-Gd0.2Ce0.8O2-δ Cathode for Solid Oxide Fuel Cells by Surface Modification with BaCO3 Nanoparticles
Recently, Fe-based perovskite oxides, such as Ln1-xSrxFeO3-δ (Ln = La, Pr, Nd, Sm, Eu) have been proposed as potential alternative electrode materials for solid oxide fuel cells (SOFCs), due to their good phase stability, electrocatalytic activity, and low cost. This work presents the catalytic effect of BaCO3 nanoparticles modified on a cobalt-free La0.8Sr0.2FeO3-δ-Gd0.2Ce0.8O2-δ (LSF-GDC) composite cathode at an intermediate-temperature (IT)-SOFC. An electrochemical conductivity relaxation investigation (ECR) shows that the Kchem value of the modified LSF-GDC improves up to a factor of 17.47, demonstrating that the oxygen reduction process is effectively enhanced after surface impregnation by BaCO3. The area-specific resistance (ASR) of the LSF-GDC cathode, modified with 9.12 wt.% BaCO3, is 0.1 Ω.cm2 at 750 °C, which is about 2.2 times lower than that of the bare cathode (0.22 Ω.cm2). As a result, the anode-supported single cells, with the modified LSF-GDC cathode, deliver a high peak power density of 993 mW/cm2 at 750 °C, about 39.5% higher than that of the bare cell (712 mW/cm2). The single cells based on the modified cathode also displayed good performance stability for about 100 h at 700 °C. This study demonstrates the effectiveness of BaCO3 nanoparticles for improving the performance of IT-SOFC cathode materials.
- Open Access
Promoted Performance of Layered Perovskite PrBaFe2O5+δ Cathode for Protonic Ceramic Fuel Cells by Zn Doping
Proton-conducting solid–oxide fuel cell (H-SOFC) is an alternative promising low-temperature electrochemical cell for renewable energy, but the performance is insufficient because of the low activity of cathode materials at low temperatures. A layered perovskite oxide PrBaFe1.9Zn0.1O5+δ (PBFZ) was synthesized and investigated as a promising cathode material for low-temperature H-SOFC. Here, the partial substitution of Fe by Zn further enhances the electrical conductivity and thermal compatibility of PrBaFe2O5+δ (PBF). The PBFZ exhibits improved conductivity in the air at intermediate temperatures and good chemical compatibility with electrolytes. The oxygen vacancy formed at the PBFZ lattice due to Zn doping enhances proton defects, resulting in an improved performance by extending the catalytic sites to the whole cathode area. A single cell with a Ni-BZCY anode, PBFZ cathode, and BaZr0.7Ce0.2Y0.1O3-δ (BZCY) electrolyte membrane was successfully fabricated and tested at 550–700 °C. The maximum power density and Rp were enhanced to 513 mW·cm−2 and 0.3 Ω·cm2 at 700 °C, respectively, due to Zn doping.
Open AccessPromoted Performance of Layered Perovskite PrBaFe2O5+δ Cathode for Protonic Ceramic Fuel Cells by Zn Doping
Proton-conducting solid–oxide fuel cell (H-SOFC) is an alternative promising low-temperature electrochemical cell for renewable energy, but the performance is insufficient because of the low activity of cathode materials at low temperatures. A layered perovskite oxide PrBaFe1.9Zn0.1O5+δ (PBFZ) was synthesized and investigated as a promising cathode material for low-temperature H-SOFC. Here, the partial substitution of Fe by Zn further enhances the electrical conductivity and thermal compatibility of PrBaFe2O5+δ (PBF). The PBFZ exhibits improved conductivity in the air at intermediate temperatures and good chemical compatibility with electrolytes. The oxygen vacancy formed at the PBFZ lattice due to Zn doping enhances proton defects, resulting in an improved performance by extending the catalytic sites to the whole cathode area. A single cell with a Ni-BZCY anode, PBFZ cathode, and BaZr0.7Ce0.2Y0.1O3-δ (BZCY) electrolyte membrane was successfully fabricated and tested at 550–700 °C. The maximum power density and Rp were enhanced to 513 mW·cm−2 and 0.3 Ω·cm2 at 700 °C, respectively, due to Zn doping.