Zhu-Bin Han
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Zhu-Bin Han has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Jian-Ying Li
School of Electronics and Information, Northwestern Polytechnical University (NWPU), Xian, Shaanxi, China
6 shared publications - Yu Du
School of Electronics and Information, Northwestern Polytechnical University, Xian, China
3 shared publications - Shi-Gang Zhou
Northwestern Polytechnical University
2 shared publications - Xiang-Long Li
School of Electronics and Information, Northwestern Polytechnical University (NWPU), Xian, China
2 shared publications - Dong Li
National Key Laboratory of Science and Technology on Space Microwave, Xian, China
1 shared publication Rui-Zi Chen
School of Electronics and Information, Northwestern Polytechnical University, Xian, China
1 shared publication
Latest Publications
- 10 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (5) , 4601-4613
Dry Noncontact Microwave Breast Imaging Based on Variational Mode Decomposition
A method based on variational mode decomposition (VMD) is proposed in this article for suppressing skin artifacts to enable early detection of small and weakly scattering breast lesions using dry and noncontact microwave imaging. In contrast to conventional approaches that rely on the coupling medium or precalibrated waveforms, the proposed algorithm integrates VMD with a singular-value curvature spectrum (SVCS) to adaptively determine the number of modes and employs $K$ -means clustering assisted by the whale optimization algorithm (WOA) to separate skin responses from tissue responses in multichannel acquisitions. Experiments on an MRI-derived, 3-D-printed breast phantom demonstrate effective suppression of strong skin backscatter and accurate isolation of breast tissue responses in the absence of the coupling medium. Comparative analyses with established methods, including ensemble empirical mode decomposition (EEMD) and singular value decomposition (SVD), indicate that the proposed approach mitigates mode mixing and truncation order uncertainty and yields higher detection quality and improved localization while providing superior adaptability and a low computational cost compatible with near real-time clinical application. These attributes make it a more practical and efficient candidate for clinical microwave breast imaging (MBI).
- 10 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (5) , 4601-4613
Dry Noncontact Microwave Breast Imaging Based on Variational Mode Decomposition
A method based on variational mode decomposition (VMD) is proposed in this article for suppressing skin artifacts to enable early detection of small and weakly scattering breast lesions using dry and noncontact microwave imaging. In contrast to conventional approaches that rely on the coupling medium or precalibrated waveforms, the proposed algorithm integrates VMD with a singular-value curvature spectrum (SVCS) to adaptively determine the number of modes and employs $K$ -means clustering assisted by the whale optimization algorithm (WOA) to separate skin responses from tissue responses in multichannel acquisitions. Experiments on an MRI-derived, 3-D-printed breast phantom demonstrate effective suppression of strong skin backscatter and accurate isolation of breast tissue responses in the absence of the coupling medium. Comparative analyses with established methods, including ensemble empirical mode decomposition (EEMD) and singular value decomposition (SVD), indicate that the proposed approach mitigates mode mixing and truncation order uncertainty and yields higher detection quality and improved localization while providing superior adaptability and a low computational cost compatible with near real-time clinical application. These attributes make it a more practical and efficient candidate for clinical microwave breast imaging (MBI).
- 24 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (5) , 3424-3429
Two-Dimensional Scanning Array in Quad-Polarization Based on Pattern and Polarization Reconfigurable Element With Single Feed
In this paper, a phased array possessing 2-D scanning capability in quad-polarization (quad-Pol.) is proposed with larger element spacing. This array is based on a new pattern and polarization reconfigurable antenna, which is composed of four inverted-L antennas connected to the center probe through P-I-N diodes. By toggling the bias states of diodes, pattern reconstruction and polarization reconstruction (y-Pol., x-Pol., and ±45°-Pol.) can be achieved simultaneously, effectively improving the scanning and anti-jamming capabilities. Subsequently, a 6×6 array with parasitic elements surrounding is designed and fabricated. The measured results demonstrated a scanning range of ±60° in the E-plane and D-plane for the y-Pol. and x-Pol.. In the H-plane, the scanning range is within ±45°. For ±45°-Pol., a ±45° scanning range is implemented in the E- and H-plane. In the D-plane, benefitting from the pattern reconfigurability, a ±60° scanning range is covered. The maximum realized gains at 4.22 GHz are 19.23 dBi and 19.56 dBi respectively. The scanning gain fluctuation is within 3 dB. Compared with previous studies, polarization diversity is introduced in 2-D scanning arrays to improve communication quality and anti-jamming ability. Meanwhile, the function realization is under the maximum element spacing of 0.54λ and single feed, saving 25% of the system cost.
- 24 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (5) , 3424-3429
Two-Dimensional Scanning Array in Quad-Polarization Based on Pattern and Polarization Reconfigurable Element With Single Feed
In this paper, a phased array possessing 2-D scanning capability in quad-polarization (quad-Pol.) is proposed with larger element spacing. This array is based on a new pattern and polarization reconfigurable antenna, which is composed of four inverted-L antennas connected to the center probe through P-I-N diodes. By toggling the bias states of diodes, pattern reconstruction and polarization reconstruction (y-Pol., x-Pol., and ±45°-Pol.) can be achieved simultaneously, effectively improving the scanning and anti-jamming capabilities. Subsequently, a 6×6 array with parasitic elements surrounding is designed and fabricated. The measured results demonstrated a scanning range of ±60° in the E-plane and D-plane for the y-Pol. and x-Pol.. In the H-plane, the scanning range is within ±45°. For ±45°-Pol., a ±45° scanning range is implemented in the E- and H-plane. In the D-plane, benefitting from the pattern reconfigurability, a ±60° scanning range is covered. The maximum realized gains at 4.22 GHz are 19.23 dBi and 19.56 dBi respectively. The scanning gain fluctuation is within 3 dB. Compared with previous studies, polarization diversity is introduced in 2-D scanning arrays to improve communication quality and anti-jamming ability. Meanwhile, the function realization is under the maximum element spacing of 0.54λ and single feed, saving 25% of the system cost.
- 19 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (8) , 6765-6770
A 2-D Beam-Scanning Circularly Polarized Folded Reflectarray Antenna Based on Risley Prism at X-Band
In this communication, we present a new design for a folded reflectarray antenna (FRA) inspired by the Risley prism antenna. This innovative FRA enables circularly polarized (CP) beam scanning in both azimuth and elevation planes with low losses. The proposed CPFRA comprises of a top layer with a circularly polarized selective surface (CPSS), a bottom layer with a RA, and a planar CP antenna serving as the feed antenna. The CPSS has the capability to fully reflect incident waves of right-hand circular polarization (RHCP) while transmitting those of left-hand circular polarization (LHCP). By mechanically rotating both the CPSS and RA, this antenna enables beam scanning in the elevation plane from 0° to 45°, as well as in the azimuth plane from 0° to 360°. At a frequency of 10 GHz, measurements show that this antenna achieves an impressive maximum gain of 21.5 dBic, corresponding to an aperture efficiency (AE) of 31.2%. This antenna offers several advantages including its compact structure, low profile, low cost, and high gain performance. As such, it proves suitable for applications where space is limited such as satellite communication and vehicle communication.
- 19 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (8) , 6765-6770
A 2-D Beam-Scanning Circularly Polarized Folded Reflectarray Antenna Based on Risley Prism at X-Band
In this communication, we present a new design for a folded reflectarray antenna (FRA) inspired by the Risley prism antenna. This innovative FRA enables circularly polarized (CP) beam scanning in both azimuth and elevation planes with low losses. The proposed CPFRA comprises of a top layer with a circularly polarized selective surface (CPSS), a bottom layer with a RA, and a planar CP antenna serving as the feed antenna. The CPSS has the capability to fully reflect incident waves of right-hand circular polarization (RHCP) while transmitting those of left-hand circular polarization (LHCP). By mechanically rotating both the CPSS and RA, this antenna enables beam scanning in the elevation plane from 0° to 45°, as well as in the azimuth plane from 0° to 360°. At a frequency of 10 GHz, measurements show that this antenna achieves an impressive maximum gain of 21.5 dBic, corresponding to an aperture efficiency (AE) of 31.2%. This antenna offers several advantages including its compact structure, low profile, low cost, and high gain performance. As such, it proves suitable for applications where space is limited such as satellite communication and vehicle communication.
- 11 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (6) , 1949-1953
Wide-Angle Scanning Array Based on Reconfigurable Element Integrated of Binary Array
A wide-angle scanning array based on a new pattern reconfigurable element (PRE) is presented. The PRE is formed by docking two modified coupling planar inverted F-shaped antennas (CPIFA), one as the main element and the other as a parasitic element. Amplitude and phase perturbations are attached to the binary array, forming a tilt pattern and a wide operating band. A 1×8 antenna array based on the PRE is designed. The active patterns tilt gradually with the increase of frequency, suppressing the grating lobes appearing at low elevations and realizing wide-angle scanning under a large spacing. The special bias circuitry reduces the impact of additional wires on the array performance. The antenna array prototype was manufactured and measured to verify the design. The dimension is 3.93λ 0 ×0.61λ 0 ×0.08λ 0 (λ 0 is the free-space wavelength at 4.1 GHz). The main lobe realized ±70° scanning range at 3.75∼4.5 GHz (18.3%) with a gain fluctuation within 3.2 dB. The maximum side lobe levels (MSLL) remain below -7.2 dB during scanning. The cross-polarization levels are kept below -45 dB. The measurement is consistent with the simulated results.
- 11 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (6) , 1949-1953
Wide-Angle Scanning Array Based on Reconfigurable Element Integrated of Binary Array
A wide-angle scanning array based on a new pattern reconfigurable element (PRE) is presented. The PRE is formed by docking two modified coupling planar inverted F-shaped antennas (CPIFA), one as the main element and the other as a parasitic element. Amplitude and phase perturbations are attached to the binary array, forming a tilt pattern and a wide operating band. A 1×8 antenna array based on the PRE is designed. The active patterns tilt gradually with the increase of frequency, suppressing the grating lobes appearing at low elevations and realizing wide-angle scanning under a large spacing. The special bias circuitry reduces the impact of additional wires on the array performance. The antenna array prototype was manufactured and measured to verify the design. The dimension is 3.93λ 0 ×0.61λ 0 ×0.08λ 0 (λ 0 is the free-space wavelength at 4.1 GHz). The main lobe realized ±70° scanning range at 3.75∼4.5 GHz (18.3%) with a gain fluctuation within 3.2 dB. The maximum side lobe levels (MSLL) remain below -7.2 dB during scanning. The cross-polarization levels are kept below -45 dB. The measurement is consistent with the simulated results.
- Open Access
- 21 February 2024
- Published by Qeios Ltd
Review of: "Investigations on Input Impedance and Radiation Pattern of a UWB Antenna for Microwave Imaging"
1. The authors should compare the performance with the latest references on UWB antennas. The advantages of the antenna proposed in this paper are also explained. 2. The authors claim that the proposed antenna is in the range of 4-10.6GHz and has a...
- 21 February 2024
- Published by Qeios Ltd
Open AccessReview of: "Investigations on Input Impedance and Radiation Pattern of a UWB Antenna for Microwave Imaging"
1. The authors should compare the performance with the latest references on UWB antennas. The advantages of the antenna proposed in this paper are also explained. 2. The authors claim that the proposed antenna is in the range of 4-10.6GHz and has a...
- 1 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 22 (8) , 1848-1852
A Broadband Double-Layer Transmitarray Antenna Based on Polarization Conversion Elements
A broadband double-layer transmitarray antenna (TA) is proposed in this letter. In order to obtain broadband performance in a double-layer structure, we use a “receiving-transmitting” (RX-TX) structure instead of a double-layer frequency selective surface. The elements of the new TA are composed with metal layers and dielectric substrate. Both the metal layer are connected by a metallized via and etched with orthogonal slots. The RX and TX layers work without interfering while converting the linearly polarized incident wave into orthogonal polarization. Phase compensation can be achieved by changing the direction and length of the microstrip meander ling. Then, a broadband TA is designed. Considering the simplicity of the design, we sequentially selected eight phase states at 45° intervals for phase modulation. The measured maximum antenna gain is 24.5 dBi. The center frequency is 10 GHz. The measured 1-dB and 3-dB gain bandwidth(BW) are 18.7% and 29.4%, respectively. The maximum aperture efficiency (AE) is 51%.
- 1 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 22 (8) , 1848-1852
A Broadband Double-Layer Transmitarray Antenna Based on Polarization Conversion Elements
A broadband double-layer transmitarray antenna (TA) is proposed in this letter. In order to obtain broadband performance in a double-layer structure, we use a “receiving-transmitting” (RX-TX) structure instead of a double-layer frequency selective surface. The elements of the new TA are composed with metal layers and dielectric substrate. Both the metal layer are connected by a metallized via and etched with orthogonal slots. The RX and TX layers work without interfering while converting the linearly polarized incident wave into orthogonal polarization. Phase compensation can be achieved by changing the direction and length of the microstrip meander ling. Then, a broadband TA is designed. Considering the simplicity of the design, we sequentially selected eight phase states at 45° intervals for phase modulation. The measured maximum antenna gain is 24.5 dBi. The center frequency is 10 GHz. The measured 1-dB and 3-dB gain bandwidth(BW) are 18.7% and 29.4%, respectively. The maximum aperture efficiency (AE) is 51%.
- 21 April 2022
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 64 (7) , 1229-1234
A broadband circularly polarized e‐shaped patch antenna
We proposed a broadband e‐shaped circularly polarized (CP) patch antenna with single‐point feed, and the feed point is located at the center of the antenna. The structure of this new antenna includes a ground plate and an e‐shaped patch placed on a substrate. The measured impedance bandwidth of the proposed antenna is approximately 17.89% (3.47–4.15 GHz), and the measured 3‐dB axial ratio bandwidth (ARBW) is about 9.47% (3.63–3.99 GHz). The antenna can achieve the gain of 8.4 to 8.7 dBi within the ARBW. And at the center frequency (3.8 GHz), right‐hand CP to left‐hand CP isolation of the antenna can reach −33 dB.
- 21 April 2022
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 64 (7) , 1229-1234
A broadband circularly polarized e‐shaped patch antenna
We proposed a broadband e‐shaped circularly polarized (CP) patch antenna with single‐point feed, and the feed point is located at the center of the antenna. The structure of this new antenna includes a ground plate and an e‐shaped patch placed on a substrate. The measured impedance bandwidth of the proposed antenna is approximately 17.89% (3.47–4.15 GHz), and the measured 3‐dB axial ratio bandwidth (ARBW) is about 9.47% (3.63–3.99 GHz). The antenna can achieve the gain of 8.4 to 8.7 dBi within the ARBW. And at the center frequency (3.8 GHz), right‐hand CP to left‐hand CP isolation of the antenna can reach −33 dB.