Noureddine Adjeroud
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Noureddine Adjeroud has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Poorani Gnanasambandan
Material Research and Technology Department, Luxembourg Institute of Science and Technology, 4422 Belvaux, Luxembourg
2 shared publications - Renaud Leturcq
Laboratory for Solid State Physics, ETH Zurich, 8093 Zurich, Switzerland
2 shared publications - Antoine Peisert
Luxembourg Institute of Science and Technology (LIST) , L-4422 Belvaux, Luxembourg
1 shared publication Benoit Duez
Goodyear Innovation Center Luxembourg (GIC*L) 3 , Avenue G.T. Smith, L-7750 Colmar-Berg, Luxembourg
1 shared publicationDamien Lenoble
Luxembourg Institute of Science and Technology (LIST) 1 , 41, rue du Brill L-4422 Belvaux, Luxembourg
1 shared publication- Damien Lenoble
University of Luxembourg, 4365 Esch-Belval Esch-sur-Alzette, Luxembourg
1 shared publication
Latest Publications
- Open Access
- 4 June 2025
- Published by Elsevier in Thin Solid Films
- Vol. 825
Correlating the growth characteristics with the optical and structural properties of atomic layer deposited zinc tin oxide
- 4 June 2025
- Published by Elsevier in Thin Solid Films
- Vol. 825
Open AccessCorrelating the growth characteristics with the optical and structural properties of atomic layer deposited zinc tin oxide
- Open Access
- 6 October 2023
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 41 (6)
LixCoyOz thin-films deposition through thermal atomic layer deposition
3D-Li ion batteries are identified as one of the most promising technologies for improving portable and safe energy storage devices. One of the main remaining challenges to be tackled in that regard is the manufacture of efficient nanostructured electrode materials. In this paper, we report on the first realization of an electrochemically active cathodic LixCoyOz material grown via a thermal atomic layer deposition process based on the combination of Co(thd)2 and Li(thd) organometallic ligands and O3 as an oxidizing agent. Comprehensive characterizations comprising XPS, Raman, HIM (helium ion microscopy)-SIMS, and the first ever SEM images of a thermal-atomic layer deposition (ALD) deposited LixCoyOz material are shown and discussed as well and the very first electrochemical results to attest the electrochemical activity of the deposited material. Those results act as the first demonstration that lithiated materials and more precisely, LixCoyOz, can be grown via an advanced thermal ALD.
- 6 October 2023
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 41 (6)
Open AccessLixCoyOz thin-films deposition through thermal atomic layer deposition
3D-Li ion batteries are identified as one of the most promising technologies for improving portable and safe energy storage devices. One of the main remaining challenges to be tackled in that regard is the manufacture of efficient nanostructured electrode materials. In this paper, we report on the first realization of an electrochemically active cathodic LixCoyOz material grown via a thermal atomic layer deposition process based on the combination of Co(thd)2 and Li(thd) organometallic ligands and O3 as an oxidizing agent. Comprehensive characterizations comprising XPS, Raman, HIM (helium ion microscopy)-SIMS, and the first ever SEM images of a thermal-atomic layer deposition (ALD) deposited LixCoyOz material are shown and discussed as well and the very first electrochemical results to attest the electrochemical activity of the deposited material. Those results act as the first demonstration that lithiated materials and more precisely, LixCoyOz, can be grown via an advanced thermal ALD.
- Open Access
- 18 November 2022
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 40 (6) , 062413
Role of ZnO and MgO interfaces on the growth and optoelectronic properties of atomic layer deposited Zn1−xMgxO films
Zn1−xMgxO films with very precise Mg content are of strong interest for the development of buffer layers on copper-indium-gallium-sulfide solar cells. Atomic layer deposition (ALD) has been successfully used for buffer layers with appropriate electronic properties; however, a good understanding of the growth properties of the ternary oxide is still lacking. Here, we investigate the role of the ZnO/MgO interface on the growth and resulting optoelectronic properties by varying the supercycle parameters (pulse ratio and bilayer period) of the ALD process. We demonstrate that the growth of the MgO layer is enhanced by the ZnO surface, describing the interplay between ZnO and MgO interfaces on the growth of Zn1−xMgxO films. The optical properties of the film not only depend on the Mg content but also on the bilayer period at a given Mg content. More specifically, the bandgap for a given Mg composition is high for the smallest bilayer period 5, starts decreasing slightly for bilayer periods between 10 and 20 due to the increase in thickness of the ZnO layer and confinement effects, and falls to a bandgap of ZnO as the bilayer period increases further >40. With the change in Zn1−xMgxO films from well-mixed to multilayer material as the bilayer period is varied, we illustrate that the optical properties of Zn1−xMgxO can be tuned effectively without largely altering the composition. Probing the effect of the bilayer period on the ternary oxides by ALD is a useful tool in understanding the mixing and interplay of binary materials that can be applied for many other materials.
- 18 November 2022
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 40 (6) , 062413
Open AccessRole of ZnO and MgO interfaces on the growth and optoelectronic properties of atomic layer deposited Zn1−xMgxO films
Zn1−xMgxO films with very precise Mg content are of strong interest for the development of buffer layers on copper-indium-gallium-sulfide solar cells. Atomic layer deposition (ALD) has been successfully used for buffer layers with appropriate electronic properties; however, a good understanding of the growth properties of the ternary oxide is still lacking. Here, we investigate the role of the ZnO/MgO interface on the growth and resulting optoelectronic properties by varying the supercycle parameters (pulse ratio and bilayer period) of the ALD process. We demonstrate that the growth of the MgO layer is enhanced by the ZnO surface, describing the interplay between ZnO and MgO interfaces on the growth of Zn1−xMgxO films. The optical properties of the film not only depend on the Mg content but also on the bilayer period at a given Mg content. More specifically, the bandgap for a given Mg composition is high for the smallest bilayer period 5, starts decreasing slightly for bilayer periods between 10 and 20 due to the increase in thickness of the ZnO layer and confinement effects, and falls to a bandgap of ZnO as the bilayer period increases further >40. With the change in Zn1−xMgxO films from well-mixed to multilayer material as the bilayer period is varied, we illustrate that the optical properties of Zn1−xMgxO can be tuned effectively without largely altering the composition. Probing the effect of the bilayer period on the ternary oxides by ALD is a useful tool in understanding the mixing and interplay of binary materials that can be applied for many other materials.
- Open Access
- 29 April 2022
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 40 (3) , 033415
On the interplay between a novel iron and iron-carbide atomic layer deposition process, the carbon nanotube growth, and the metal–carbon nanotube coating properties on silica substrates
The fabrication of iron and iron carbide nanoparticles (NPs) for catalytic reactions such as the growth of carbon nanotubes (CNTs) compete with the challenge of covering a wide range of substrates with perfect control of the NP reactivity. We present in this work a novel atomic layer deposition (ALD) process to grow Fe/Fe3C thin films over silica flat substrates. The depositions were carried out exposing the surface through various number of ALD cycles, resulting in Fe-based films with thicknesses ranging from 4 nm to almost 40 nm. After a thermal treatment, the film dewetts into nanoparticles, where the efficiency to grow CNTs will depend on the average size distribution of the nanocatalyst. X-ray diffraction and x-ray photoelectron spectroscopy were used to track the elemental, phase, and shape (film to particles) transformation in order to identify the key features of the nanocatalyst, thereby controlling the CNT nucleation and growth. Thin film thickness of around 5 nm promotes the growth of a dense CNT forest. Furthermore, the metal–CNT films reveal optical properties that are totally tailored by the initial number of ALD cycles.
- 29 April 2022
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 40 (3) , 033415
Open AccessOn the interplay between a novel iron and iron-carbide atomic layer deposition process, the carbon nanotube growth, and the metal–carbon nanotube coating properties on silica substrates
The fabrication of iron and iron carbide nanoparticles (NPs) for catalytic reactions such as the growth of carbon nanotubes (CNTs) compete with the challenge of covering a wide range of substrates with perfect control of the NP reactivity. We present in this work a novel atomic layer deposition (ALD) process to grow Fe/Fe3C thin films over silica flat substrates. The depositions were carried out exposing the surface through various number of ALD cycles, resulting in Fe-based films with thicknesses ranging from 4 nm to almost 40 nm. After a thermal treatment, the film dewetts into nanoparticles, where the efficiency to grow CNTs will depend on the average size distribution of the nanocatalyst. X-ray diffraction and x-ray photoelectron spectroscopy were used to track the elemental, phase, and shape (film to particles) transformation in order to identify the key features of the nanocatalyst, thereby controlling the CNT nucleation and growth. Thin film thickness of around 5 nm promotes the growth of a dense CNT forest. Furthermore, the metal–CNT films reveal optical properties that are totally tailored by the initial number of ALD cycles.