Tove Malmqvist
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tove Malmqvist has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Helena Westerlind
KTH Royal Institute of Technology: Architecture and Technology
2 shared publications - Jonas Sondal
Sweden Green Building Council, Långholmsgatan 34, 117 33 Stockholm, Sweden
2 shared publications - Josefin Wangel
Department of Urban and Rural Development, Swedish University of Agricultural Sciences, Sweden
2 shared publications - Mauritz Glaumann
Faculty of Engineering and Sustainable Development, University of Gävle, SE-801 76 Gävle, Sweden
2 shared publications - Olli Vigren
Department of Civil and Architectural Engineering, KTH Royal Institute of Technology, Stockholm, Sweden
2 shared publications Ahmad Al-Najjar
1 shared publication
Latest Publications
- Open Access
- 14 January 2026
- Published by Ubiquity Press, Ltd. in Buildings and Cities
- Vol. 7 (1) , 891-908
Reusing precast concrete elements in construction: assessing the economic conditions
The reuse of building components such as precast concrete elements (PCEs) is a promising strategy for reducing construction emissions, but its economic feasibility remains a barrier to wider adoption. Although technical and value creation aspects have been studied, microeconomic conditions remain underexplored. This study identifies several economic factors and boundary conditions that influence firms and supply chains to reuse building components. An economic framework based on the supply chain is developed to compare demolition, reuse and virgin material pathways. The analysis draws on academic, industry and project documents (n = 54) interpreted through economic theories. The economic viability of reuse is context-dependent. It depends upon a sequence of interdependent economic decisions by several actors, as well as the alignment of system-level conditions and economic mechanisms across those decision points. Reuse is driven by trade-offs between avoided disposal and material costs and higher deconstruction, logistics, storage and coordination costs. Wider adoption requires sufficient supply of and demand for reusable elements, and cost management. Future research should focus on cost structures, regulation, technological change and supply-chain dynamics to support investment and policy decisions. PRACTICE RELEVANCE The reuse of PCEs can reduce greenhouse gas emissions from construction, but economic feasibility remains a key barrier to wider adoption. This study identifies economic boundary conditions under which reuse becomes feasible in practice. Results indicate that reuse involves trade-offs between a) avoided disposal and material costs and b) higher deconstruction, logistics, storage and coordination costs. Long-term profitability depends on market formation, capacity investments and learning effects. Evidence suggests feasibility already exists in specific cases. The findings can inform managers, investors and policymakers in assessing feasibility, risk and supply-chain alignment with a view to creating appropriate conditions and opportunities in policy and practice.
- 14 January 2026
- Published by Ubiquity Press, Ltd. in Buildings and Cities
- Vol. 7 (1) , 891-908
Open AccessReusing precast concrete elements in construction: assessing the economic conditions
The reuse of building components such as precast concrete elements (PCEs) is a promising strategy for reducing construction emissions, but its economic feasibility remains a barrier to wider adoption. Although technical and value creation aspects have been studied, microeconomic conditions remain underexplored. This study identifies several economic factors and boundary conditions that influence firms and supply chains to reuse building components. An economic framework based on the supply chain is developed to compare demolition, reuse and virgin material pathways. The analysis draws on academic, industry and project documents (n = 54) interpreted through economic theories. The economic viability of reuse is context-dependent. It depends upon a sequence of interdependent economic decisions by several actors, as well as the alignment of system-level conditions and economic mechanisms across those decision points. Reuse is driven by trade-offs between avoided disposal and material costs and higher deconstruction, logistics, storage and coordination costs. Wider adoption requires sufficient supply of and demand for reusable elements, and cost management. Future research should focus on cost structures, regulation, technological change and supply-chain dynamics to support investment and policy decisions. PRACTICE RELEVANCE The reuse of PCEs can reduce greenhouse gas emissions from construction, but economic feasibility remains a key barrier to wider adoption. This study identifies economic boundary conditions under which reuse becomes feasible in practice. Results indicate that reuse involves trade-offs between a) avoided disposal and material costs and b) higher deconstruction, logistics, storage and coordination costs. Long-term profitability depends on market formation, capacity investments and learning effects. Evidence suggests feasibility already exists in specific cases. The findings can inform managers, investors and policymakers in assessing feasibility, risk and supply-chain alignment with a view to creating appropriate conditions and opportunities in policy and practice.
- 1 January 2025
- Published by Curran Associates, Inc.
- p. 175-184
Assessing the Economic Boundary Conditions for Reusing Precast Concrete Elements in Construction
- 1 January 2025
- Published by Curran Associates, Inc.
- p. 175-184
Assessing the Economic Boundary Conditions for Reusing Precast Concrete Elements in Construction
- Open Access
- 4 July 2023
- Published by Ubiquity Press, Ltd. in Buildings and Cities
- Vol. 4 (1) , 386-404
Embodied carbon savings of co-living and implications for metrics
- 4 July 2023
- Published by Ubiquity Press, Ltd. in Buildings and Cities
- Vol. 4 (1) , 386-404
Open AccessEmbodied carbon savings of co-living and implications for metrics
- Open Access
- 2 January 2023
- Published by Ubiquity Press, Ltd. in Buildings and Cities
- Vol. 4 (1) , 274-291
GHG emissions from building renovation versus new-build: incentives from assessment methods
A variety of life cycle assessment (LCA) calculation methods and rules exist in European countries for building performance evaluation based on new-build. However, the increased focus on the retention and renovation of the existing building stock raises questions about the appropriateness of these the methods and rules when applied to renovation cases. Using a real renovation case, Danish, Finnish and Swedish LCA-based greenhouse gas emissions (GHGe) assessments are assessed for how they position building renovation in relation to demolition and new-build reference values. The influence of these three different methods is examined for future development policies. Results show that upfront emissions for renovation are significantly lower for all approaches. The Swedish approach had the lowest GHG emissions compared with a scenario with demolition and new-build due to the method, which only includes upfront emissions of new materials. The Danish and Finnish renovation cases each performed worse in comparison with the new-build future emissions, specifically from operational energy use. Therefore, method development should consider incentives for upfront and future emissions. Furthermore, methods could account for the existing materials in the building, which are included in the Danish and Finnish approaches. This would provide incentive for renovation and reuse. Policy relevance Future policymaking needs to consider the influence of LCA methods on climate impact assessment of building renovations. The temporal differences occur when renovation is compared with demolition and new-build. Policy needs to take account of these temporal differences for apportioning GHG emissions between upfront and future emissions. A key question is whether existing materials should be included in the assessment as this would incentivise the reuse of these materials. Differences in accounting for the impacts of biogenic carbon in materials yields different results. This is a key issue in carbon accounting and will influence future practice.
- 2 January 2023
- Published by Ubiquity Press, Ltd. in Buildings and Cities
- Vol. 4 (1) , 274-291
Open AccessGHG emissions from building renovation versus new-build: incentives from assessment methods
A variety of life cycle assessment (LCA) calculation methods and rules exist in European countries for building performance evaluation based on new-build. However, the increased focus on the retention and renovation of the existing building stock raises questions about the appropriateness of these the methods and rules when applied to renovation cases. Using a real renovation case, Danish, Finnish and Swedish LCA-based greenhouse gas emissions (GHGe) assessments are assessed for how they position building renovation in relation to demolition and new-build reference values. The influence of these three different methods is examined for future development policies. Results show that upfront emissions for renovation are significantly lower for all approaches. The Swedish approach had the lowest GHG emissions compared with a scenario with demolition and new-build due to the method, which only includes upfront emissions of new materials. The Danish and Finnish renovation cases each performed worse in comparison with the new-build future emissions, specifically from operational energy use. Therefore, method development should consider incentives for upfront and future emissions. Furthermore, methods could account for the existing materials in the building, which are included in the Danish and Finnish approaches. This would provide incentive for renovation and reuse. Policy relevance Future policymaking needs to consider the influence of LCA methods on climate impact assessment of building renovations. The temporal differences occur when renovation is compared with demolition and new-build. Policy needs to take account of these temporal differences for apportioning GHG emissions between upfront and future emissions. A key question is whether existing materials should be included in the assessment as this would incentivise the reuse of these materials. Differences in accounting for the impacts of biogenic carbon in materials yields different results. This is a key issue in carbon accounting and will influence future practice.
- Open Access
- 2 January 2023
- Published by Elsevier in Journal of Cleaner Production
- Vol. 389
Industrial ecosystem renewal towards circularity to achieve the benefits of reuse - Learning from circular construction
- 2 January 2023
- Published by Elsevier in Journal of Cleaner Production
- Vol. 389
Open AccessIndustrial ecosystem renewal towards circularity to achieve the benefits of reuse - Learning from circular construction
- Open Access
Climate Mitigation in the Swedish Single-Family Homes Industry and Potentials for LCA as Decision Support
Decision support tools for incentivizing environmentally sound decisions in building design, such as LCA (life cycle assessment), have been highlighted as an essential feature for enhancing the realization of more sustainable buildings. Nevertheless, the use of LCA to support decisions in building design is still limited in practice. A better understanding of the social dynamics and detailed contexts of the decisions leading up to a final building design is therefore critical for better integration of LCA-based information in the decision-making processes. This paper reports a qualitative, semi-structured interview study of single-family home producers in Sweden and their decision-making in relation to climate mitigation, with a particular focus on embodied carbon mitigation. By studying a specific branch of the building and construction sector, a more in-depth record can be obtained of the particularities of implementation contexts and decision-making situations in which LCA may, or may not, have a role in driving climate mitigation. Four primary decision contexts in which LCA may have an influential role to drive embodied carbon reduction include: (1) the development of building systems, (2) development and offering of house models, (3) the selection of construction products for the building system as well as for the offer of add-on products to customers, and (4) the dialogues in the individual house-buyer projects. Decision-making that affects sustainable outcomes in this part of the sector is very much dependent on a supporting regulatory context. Over the years, using building LCA in early design stages, for optimization towards low-impact final buildings, has been a repeatedly promoted recommendation both in academia and practice. This study, however, reveals that such a conclusion is too simplistic. The different overarching decision contexts identified for this particular branch display the variety of needs for life cycle-based information.
Open AccessClimate Mitigation in the Swedish Single-Family Homes Industry and Potentials for LCA as Decision Support
Decision support tools for incentivizing environmentally sound decisions in building design, such as LCA (life cycle assessment), have been highlighted as an essential feature for enhancing the realization of more sustainable buildings. Nevertheless, the use of LCA to support decisions in building design is still limited in practice. A better understanding of the social dynamics and detailed contexts of the decisions leading up to a final building design is therefore critical for better integration of LCA-based information in the decision-making processes. This paper reports a qualitative, semi-structured interview study of single-family home producers in Sweden and their decision-making in relation to climate mitigation, with a particular focus on embodied carbon mitigation. By studying a specific branch of the building and construction sector, a more in-depth record can be obtained of the particularities of implementation contexts and decision-making situations in which LCA may, or may not, have a role in driving climate mitigation. Four primary decision contexts in which LCA may have an influential role to drive embodied carbon reduction include: (1) the development of building systems, (2) development and offering of house models, (3) the selection of construction products for the building system as well as for the offer of add-on products to customers, and (4) the dialogues in the individual house-buyer projects. Decision-making that affects sustainable outcomes in this part of the sector is very much dependent on a supporting regulatory context. Over the years, using building LCA in early design stages, for optimization towards low-impact final buildings, has been a repeatedly promoted recommendation both in academia and practice. This study, however, reveals that such a conclusion is too simplistic. The different overarching decision contexts identified for this particular branch display the variety of needs for life cycle-based information.
- Open Access
- 12 January 2022
- Published by Ubiquity Press, Ltd. in Buildings and Cities
- Vol. 3 (1) , 334-355
Embodied carbon of concrete in buildings, Part 2: are the messages accurate?
- 12 January 2022
- Published by Ubiquity Press, Ltd. in Buildings and Cities
- Vol. 3 (1) , 334-355
Open AccessEmbodied carbon of concrete in buildings, Part 2: are the messages accurate?
- Open Access
- 30 May 2020
- Published by MDPI AG in Sustainability
- Vol. 12 (11) , 4454
Developing Citylab Post-Construction—A Swedish Certification System to Evaluate the Sustainability of Urban Areas
This paper describes the development of Citylab Post-Construction, a Swedish certification system for evaluating the sustainability performance of urban areas in a post-construction phase once the area is inhabited. The process design was based on transdisciplinary and research-through-design approaches, and involved experts and practitioners within Swedish urban planning, real estate and construction sector. This paper is not highlighting the certification system per se, but rather the process of developing it, with the aim of increasing the understanding of such design processes. A previously developed, but so far untested, framework of key considerations for certification systems was used to clarify benefits and drawbacks of different design decisions. The framework was used in all steps of the process, from defining the overall structure, to selecting indicators, formulating detailed requirements and assessing comments of the open consultation of a draft version. The framework of key considerations proved useful in supporting this process, by highlighting conflicts as well as synergies and creating transparency with respect to trade-offs needed between being e.g., scientifically credible but still practical enough. While it is difficult to separate the framework from the process in which it was put to use, we believe that the framework can be supportive also in other processes, both for developing new certification systems or for refining and evaluating existing ones.
- 30 May 2020
- Published by MDPI AG in Sustainability
- Vol. 12 (11) , 4454
Open AccessDeveloping Citylab Post-Construction—A Swedish Certification System to Evaluate the Sustainability of Urban Areas
This paper describes the development of Citylab Post-Construction, a Swedish certification system for evaluating the sustainability performance of urban areas in a post-construction phase once the area is inhabited. The process design was based on transdisciplinary and research-through-design approaches, and involved experts and practitioners within Swedish urban planning, real estate and construction sector. This paper is not highlighting the certification system per se, but rather the process of developing it, with the aim of increasing the understanding of such design processes. A previously developed, but so far untested, framework of key considerations for certification systems was used to clarify benefits and drawbacks of different design decisions. The framework was used in all steps of the process, from defining the overall structure, to selecting indicators, formulating detailed requirements and assessing comments of the open consultation of a draft version. The framework of key considerations proved useful in supporting this process, by highlighting conflicts as well as synergies and creating transparency with respect to trade-offs needed between being e.g., scientifically credible but still practical enough. While it is difficult to separate the framework from the process in which it was put to use, we believe that the framework can be supportive also in other processes, both for developing new certification systems or for refining and evaluating existing ones.
- Open Access
- 12 May 2020
- Published by Ubiquity Press, Ltd. in Buildings and Cities
- Vol. 1 (1) , 70-85
Sharing indoor space: stakeholders’ perspectives and energy metrics
The sharing of indoor space can improve space and energy efficiency. The drivers and barriers to space-sharing initiatives are investigated from the perspectives of building users and building sector practitioners, based on interviews and a workshop. The role of energy performance metrics in promoting space efficiency is further analysed through a literature review. From the users' perspective, space sharing can be understood through the interplay between tangible aspects (e.g. concrete benefits derived from sharing), organisational aspects (e.g. common decision processes and conflict resolution) and social aspects (e.g. group identity and consensus on appropriate behaviours). From the perspective of architects and property owners, shareable spaces require features such as flexibility and multifunctionality. The design of such spaces is limited by regulatory issues (e.g. building regulations poorly accommodate shared facilities) and business-related issues. One such issue is that building performance metrics normalised based on floor area do not incentivise the efficient use of space. A review of complementary metrics is provided, covering parameters such as number of users, layout, time of use, etc. Each metric serves a particular purpose; therefore, a set of complementary metrics can be used to support decisions at different phases of the building's life cycle. Practice relevance Improving space efficiency (e.g. by sharing indoor space) is a key strategy to meet simultaneously the future demand for facilities in cities and fulfil environmental objectives such as a reduction of climate change impact in the building sector. A clearer understanding of the specificities of space sharing is provided from the perspectives of building users and practitioners. This will assist practitioners to understand the needs of other stakeholders. Regulatory and business-related barriers to space-sharing initiatives are highlighted as a first step towards overcoming these barriers. Guidance is provided on complementary energy performance metrics appropriate for space efficiency. These metrics can be used to support various decisions during the different stages of a building's life cycle.
- 12 May 2020
- Published by Ubiquity Press, Ltd. in Buildings and Cities
- Vol. 1 (1) , 70-85
Open AccessSharing indoor space: stakeholders’ perspectives and energy metrics
The sharing of indoor space can improve space and energy efficiency. The drivers and barriers to space-sharing initiatives are investigated from the perspectives of building users and building sector practitioners, based on interviews and a workshop. The role of energy performance metrics in promoting space efficiency is further analysed through a literature review. From the users' perspective, space sharing can be understood through the interplay between tangible aspects (e.g. concrete benefits derived from sharing), organisational aspects (e.g. common decision processes and conflict resolution) and social aspects (e.g. group identity and consensus on appropriate behaviours). From the perspective of architects and property owners, shareable spaces require features such as flexibility and multifunctionality. The design of such spaces is limited by regulatory issues (e.g. building regulations poorly accommodate shared facilities) and business-related issues. One such issue is that building performance metrics normalised based on floor area do not incentivise the efficient use of space. A review of complementary metrics is provided, covering parameters such as number of users, layout, time of use, etc. Each metric serves a particular purpose; therefore, a set of complementary metrics can be used to support decisions at different phases of the building's life cycle. Practice relevance Improving space efficiency (e.g. by sharing indoor space) is a key strategy to meet simultaneously the future demand for facilities in cities and fulfil environmental objectives such as a reduction of climate change impact in the building sector. A clearer understanding of the specificities of space sharing is provided from the perspectives of building users and practitioners. This will assist practitioners to understand the needs of other stakeholders. Regulatory and business-related barriers to space-sharing initiatives are highlighted as a first step towards overcoming these barriers. Guidance is provided on complementary energy performance metrics appropriate for space efficiency. These metrics can be used to support various decisions during the different stages of a building's life cycle.
- Open Access
- 10 May 2019
- Published by MDPI AG in Sustainability
- Vol. 11 (9) , 2673
Key Considerations When Designing Certification Systems for Urban Sustainability and Implications for The Swedish Post-Construction System Citylab
Addressing sustainability in urban planning has led to an increasing number of certification systems to support such processes. Nevertheless, there is no commonly recognised framework listing what is important to consider when developing such systems. Citylab is a certification system that is used in several Swedish urban development projects. Today, Citylab certifies the planning process of urban areas but it will be extended with a post-construction part. This paper presents a three steps analysis of the design of such a post-construction certification system. First, a literature review was performed, which allowed for identifying three principles and 11 sub-principles that make up a generic framework for the design of similar certification systems. Second, 13 semi-structured interviews were conducted in Sweden with key urban development stakeholders to better specify the scope of a post-construction extension of Citylab. As a result, four alternatives emerge for the role and function of this system. Third, crossing the results of both previous steps allowed for an understanding of important considerations and implications for the Citylab post-construction certification system design. The paper concludes on the relevance of such a reflexive procedure for the design of certification systems in general, in which the use of the framework is a key to ensure transparency and enable deliberate choices and priorities.
- 10 May 2019
- Published by MDPI AG in Sustainability
- Vol. 11 (9) , 2673
Open AccessKey Considerations When Designing Certification Systems for Urban Sustainability and Implications for The Swedish Post-Construction System Citylab
Addressing sustainability in urban planning has led to an increasing number of certification systems to support such processes. Nevertheless, there is no commonly recognised framework listing what is important to consider when developing such systems. Citylab is a certification system that is used in several Swedish urban development projects. Today, Citylab certifies the planning process of urban areas but it will be extended with a post-construction part. This paper presents a three steps analysis of the design of such a post-construction certification system. First, a literature review was performed, which allowed for identifying three principles and 11 sub-principles that make up a generic framework for the design of similar certification systems. Second, 13 semi-structured interviews were conducted in Sweden with key urban development stakeholders to better specify the scope of a post-construction extension of Citylab. As a result, four alternatives emerge for the role and function of this system. Third, crossing the results of both previous steps allowed for an understanding of important considerations and implications for the Citylab post-construction certification system design. The paper concludes on the relevance of such a reflexive procedure for the design of certification systems in general, in which the use of the framework is a key to ensure transparency and enable deliberate choices and priorities.