Jiexuan Hou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Jiexuan Hou has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Yangwei Liu
Beihang University
12 shared publications - Yumeng Tang
Beihang University
5 shared publications - Feitong Wang2 shared publications
- Weibo Zhong
School of Energy and Power Engineering, Beihang University, Beijing 100191, China
2 shared publications Luyang Zhong
School of Energy and Power Engineering, Beihang University, Beijing 100191, China
1 shared publication- Nan Xie
School of Energy and Power Engineering, Beihang University No.37 Xueyuan Road, Haidian District, Beijing 100191, China
1 shared publication
Latest Publications
- 3 November 2026
- Published by Elsevier in Aerospace Science and Technology
- Vol. 180
A novel blade leading edge design method for low shock-associated tone noise
- 3 November 2026
- Published by Elsevier in Aerospace Science and Technology
- Vol. 180
A novel blade leading edge design method for low shock-associated tone noise
- 1 September 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (9)
Effect of shock waves on evolution of tip leakage vortex in axial compressors
This study investigates the tip leakage flow in both low-speed and transonic rotors using hybrid Reynolds-averaged Navier–Stokes-large eddy simulation methods to explore the unified mechanism governing the evolution of the tip leakage vortex (TLV), with a particular focus on the effect of shock waves on TLV breakdown. Vortex structures are identified using the local trace criterion, while the unsteady characteristics and breakdown patterns of the TLV are analyzed using particle-tracing techniques. The results demonstrate that the TLV exhibits a similar evolutionary process in both rotors prior to shock wave interaction, whereas the presence of the shock wave significantly alters the trajectory and breakdown patterns of the TLV. Specifically, the TLV undergoes solely spiral-type breakdown in the low-speed rotor, whereas both spiral- and bubble-type breakdowns occur in the transonic rotor. For both rotors, the instability of the TLV is significantly influenced by the secondary leakage flow from the adjacent blade passage; furthermore, the shock wave primarily amplifies the inherent unsteadiness of the TLV rather than directly triggering its instability. These findings provide deeper insight into the mechanisms underlying TLV breakdown and the influence of shock waves on rotor stability, offering valuable guidance for the aerodynamic design and optimization of axial compressors.
- 1 September 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (9)
Effect of shock waves on evolution of tip leakage vortex in axial compressors
This study investigates the tip leakage flow in both low-speed and transonic rotors using hybrid Reynolds-averaged Navier–Stokes-large eddy simulation methods to explore the unified mechanism governing the evolution of the tip leakage vortex (TLV), with a particular focus on the effect of shock waves on TLV breakdown. Vortex structures are identified using the local trace criterion, while the unsteady characteristics and breakdown patterns of the TLV are analyzed using particle-tracing techniques. The results demonstrate that the TLV exhibits a similar evolutionary process in both rotors prior to shock wave interaction, whereas the presence of the shock wave significantly alters the trajectory and breakdown patterns of the TLV. Specifically, the TLV undergoes solely spiral-type breakdown in the low-speed rotor, whereas both spiral- and bubble-type breakdowns occur in the transonic rotor. For both rotors, the instability of the TLV is significantly influenced by the secondary leakage flow from the adjacent blade passage; furthermore, the shock wave primarily amplifies the inherent unsteadiness of the TLV rather than directly triggering its instability. These findings provide deeper insight into the mechanisms underlying TLV breakdown and the influence of shock waves on rotor stability, offering valuable guidance for the aerodynamic design and optimization of axial compressors.
- Top Cited Papers
- 31 January 2026
- Published by Elsevier in Aerospace Science and Technology
- Vol. 173
Spatiotemporal analysis of tip leakage flow in an axial compressor rotor using three-dimensional dynamic mode decomposition
- 31 January 2026
- Published by Elsevier in Aerospace Science and Technology
- Vol. 173
Top Cited PapersSpatiotemporal analysis of tip leakage flow in an axial compressor rotor using three-dimensional dynamic mode decomposition
- 1 January 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (1)
Lagrangian analysis on mechanism of forced convection heat transfer control for cylinder via deep reinforcement learning
Forced convection heat transfer plays a vital role in engineering; however, its control presents significant complexity. In this paper, a closed-loop deep reinforcement learning framework is introduced to optimize cooling tasks in a heat exchanger, where a cylindrical heat source is immersed in a narrow cavity. The online learning deep Q-networks (DQN) algorithm is implemented, and an offline learning conservative Q-learning soft actor-critic (CQL-SAC) algorithm is first proposed to learn based solely on preexisting databases without interacting with the environment. Taking the continuous blowing mode as the baseline, the CQL-SAC control obtains a temperature reduction of 49.1% greater than that under the optimal human control and consumes only 0.53% of the time required by online learning. While the DQN control achieves the best cooling performance, with a temperature reduction exceeding that of the optimal human control by 91.4%. The underlying mechanisms are analyzed. Particle tracking technology and Lagrangian coherence structures (LCS) are employed to identify regions of sufficient heat exchange and precisely map from where a cold particle can be captured to undergo sufficient heat exchange or swiftly escapes with inadequate heat exchange. The mechanism of the enhanced cooling effect under the DQN control is clarified from a particle capturing and escaping perspective. The greater overlap between the cold particle capture region and hotspots correlating with the more saddle points of the LCS within this region indicates more intense heat exchange in areas closer to hotspots, thus resulting in better cooling performance.
- 1 January 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (1)
Lagrangian analysis on mechanism of forced convection heat transfer control for cylinder via deep reinforcement learning
Forced convection heat transfer plays a vital role in engineering; however, its control presents significant complexity. In this paper, a closed-loop deep reinforcement learning framework is introduced to optimize cooling tasks in a heat exchanger, where a cylindrical heat source is immersed in a narrow cavity. The online learning deep Q-networks (DQN) algorithm is implemented, and an offline learning conservative Q-learning soft actor-critic (CQL-SAC) algorithm is first proposed to learn based solely on preexisting databases without interacting with the environment. Taking the continuous blowing mode as the baseline, the CQL-SAC control obtains a temperature reduction of 49.1% greater than that under the optimal human control and consumes only 0.53% of the time required by online learning. While the DQN control achieves the best cooling performance, with a temperature reduction exceeding that of the optimal human control by 91.4%. The underlying mechanisms are analyzed. Particle tracking technology and Lagrangian coherence structures (LCS) are employed to identify regions of sufficient heat exchange and precisely map from where a cold particle can be captured to undergo sufficient heat exchange or swiftly escapes with inadequate heat exchange. The mechanism of the enhanced cooling effect under the DQN control is clarified from a particle capturing and escaping perspective. The greater overlap between the cold particle capture region and hotspots correlating with the more saddle points of the LCS within this region indicates more intense heat exchange in areas closer to hotspots, thus resulting in better cooling performance.
- 16 November 2024
- Published by Springer Nature
- p. 157-172
Investigation of Vortex Flow Features in Compressor Flows Based on Vortex Identification Methods
- 16 November 2024
- Published by Springer Nature
- p. 157-172
Investigation of Vortex Flow Features in Compressor Flows Based on Vortex Identification Methods
- Open Access
- 24 October 2024
- Published by Global Power and Propulsion Society in Journal of the Global Power and Propulsion Society
- Vol. 8, 405-420
Analysis of unsteady tip leakage flow in an axial compressor rotor using dynamic mode decomposition
Tip leakage flow (TLF) is an important flow structure in the compressor, and it has a significant effect on the efficiency and stability of the compressor. In this study, dynamic mode decomposition (DMD) is used to study the spatiotemporal flow structure of the tip leakage flow in a compressor rotor. The high-fidelity flow field calculated via the delayed-detached eddy simulation (DDES) of an axial compressor rotor is used as the input dataset for the DMD algorithm. The results show that the unsteady motion of the tip leakage vortex (TLV) is quite different at its generation, development, and dissipation phases. Additionally, three typical unsteady structures, the oscillation of the primary TLV, the TLV breakdown, and the unsteadiness of the unsteady blockage cell, is identified by the DMD modes. Unsteady motions also largely affect the vortex structure and loss generation, especially after the vortex breakdown. The spatiotemporal structure identified by DMD provides a new understanding, which could be helpful for the modeling or flow control of the TLF.
- 24 October 2024
- Published by Global Power and Propulsion Society in Journal of the Global Power and Propulsion Society
- Vol. 8, 405-420
Open AccessAnalysis of unsteady tip leakage flow in an axial compressor rotor using dynamic mode decomposition
Tip leakage flow (TLF) is an important flow structure in the compressor, and it has a significant effect on the efficiency and stability of the compressor. In this study, dynamic mode decomposition (DMD) is used to study the spatiotemporal flow structure of the tip leakage flow in a compressor rotor. The high-fidelity flow field calculated via the delayed-detached eddy simulation (DDES) of an axial compressor rotor is used as the input dataset for the DMD algorithm. The results show that the unsteady motion of the tip leakage vortex (TLV) is quite different at its generation, development, and dissipation phases. Additionally, three typical unsteady structures, the oscillation of the primary TLV, the TLV breakdown, and the unsteadiness of the unsteady blockage cell, is identified by the DMD modes. Unsteady motions also largely affect the vortex structure and loss generation, especially after the vortex breakdown. The spatiotemporal structure identified by DMD provides a new understanding, which could be helpful for the modeling or flow control of the TLF.
- Open Access
- 30 July 2024
- Published by Global Power and Propulsion Society in Journal of the Global Power and Propulsion Society
- Vol. 8, 255-268
Investigation of unsteady cavitating flow around a hydrofoil using GAS method
Cavitation significantly impacts the performance of hydraulic machinery. However, cavitation is complex, and the evolution of complex vortical structures in cavitating flow requires further investigation. In this study, the unsteady cavitating flow around a NACA0009 hydrofoil with gap sizes of 1 and 10 mm is simulated using grid-adaptive simulation (GAS), which is a novel hybrid method that modifies the turbulent viscosity based on the Kolmogorov energy spectrum. The prediction accuracy of GAS is validated by comparing with experimental and LES results, demonstrating its superiority compared to the scale-adaptive simulation. A detailed study on the effect of gap size with an emphasis on the evolution of complex vortical structures is performed. It is discovered that the gap size plays a crucial role in the development of complex flow structures, as well as their interactions. Moreover, as the gap size increases, the two-layer structure of tip leakage vortex (TLV) becomes more pronounced. The inner TLV core region is generated by the vorticity transport from tip to the TLV. The outer layer structure is formed by the mainstream, tip separation vortex and leakage flow. The complex outer layer significantly influences the stability of the TLV and cavities. The investigation on the TLV structure in this study of cavitation flow aligns with the previous conclusions in compressors, indicating that two-layer structure of the TLV is a universal phenomenon.
- 30 July 2024
- Published by Global Power and Propulsion Society in Journal of the Global Power and Propulsion Society
- Vol. 8, 255-268
Open AccessInvestigation of unsteady cavitating flow around a hydrofoil using GAS method
Cavitation significantly impacts the performance of hydraulic machinery. However, cavitation is complex, and the evolution of complex vortical structures in cavitating flow requires further investigation. In this study, the unsteady cavitating flow around a NACA0009 hydrofoil with gap sizes of 1 and 10 mm is simulated using grid-adaptive simulation (GAS), which is a novel hybrid method that modifies the turbulent viscosity based on the Kolmogorov energy spectrum. The prediction accuracy of GAS is validated by comparing with experimental and LES results, demonstrating its superiority compared to the scale-adaptive simulation. A detailed study on the effect of gap size with an emphasis on the evolution of complex vortical structures is performed. It is discovered that the gap size plays a crucial role in the development of complex flow structures, as well as their interactions. Moreover, as the gap size increases, the two-layer structure of tip leakage vortex (TLV) becomes more pronounced. The inner TLV core region is generated by the vorticity transport from tip to the TLV. The outer layer structure is formed by the mainstream, tip separation vortex and leakage flow. The complex outer layer significantly influences the stability of the TLV and cavities. The investigation on the TLV structure in this study of cavitation flow aligns with the previous conclusions in compressors, indicating that two-layer structure of the TLV is a universal phenomenon.
- Open Access
A Lagrangian Analysis of Tip Leakage Vortex in a Low-Speed Axial Compressor Rotor
A Lagrangian method is introduced to analyze the tip leakage vortex (TLV) behavior in a low-speed axial compressor rotor. The finite-time Lyapunov exponent (FTLE) fields are calculated based on the delayed detached-eddy simulation (DDES) results and identifying the FTLE ridges as Lagrangian coherent structures (LCSs). The computational method of the FTLE field in three-dimensional unsteady flow fields is discussed and then applied to the instantaneous flow fields at both the design and near-stall conditions. Results show that the accuracy of the particle trajectory and the density of the initial grid of the particle trajectory greatly affect the results of the FTLE field and, thus, the LCSs. Compared to the Eulerian Q method, which is calculated based on the symmetric and anti-symmetric components of the local velocity gradient tensor, the Lagrangian method has great potential in unraveling the mechanism of complex vortex structures. The LCSs show a transport barrier between the TLV and the secondary TLV, indicating two separate vortices. The aLCSs show the bubble-like and bar-like structure in the isosurfaces corresponding to the bubble and spiral breakdown patterns.
Open AccessA Lagrangian Analysis of Tip Leakage Vortex in a Low-Speed Axial Compressor Rotor
A Lagrangian method is introduced to analyze the tip leakage vortex (TLV) behavior in a low-speed axial compressor rotor. The finite-time Lyapunov exponent (FTLE) fields are calculated based on the delayed detached-eddy simulation (DDES) results and identifying the FTLE ridges as Lagrangian coherent structures (LCSs). The computational method of the FTLE field in three-dimensional unsteady flow fields is discussed and then applied to the instantaneous flow fields at both the design and near-stall conditions. Results show that the accuracy of the particle trajectory and the density of the initial grid of the particle trajectory greatly affect the results of the FTLE field and, thus, the LCSs. Compared to the Eulerian Q method, which is calculated based on the symmetric and anti-symmetric components of the local velocity gradient tensor, the Lagrangian method has great potential in unraveling the mechanism of complex vortex structures. The LCSs show a transport barrier between the TLV and the secondary TLV, indicating two separate vortices. The aLCSs show the bubble-like and bar-like structure in the isosurfaces corresponding to the bubble and spiral breakdown patterns.
- Open Access
- 1 January 2024
- Published by AIP Publishing in AIP Advances
- Vol. 14 (1)
Effect of moving end wall on tip leakage flow in a compressor cascade with different clearance heights
Numerical simulations have been carried out to investigate the effect of the moving end wall on the tip leakage flow structure in a compressor cascade with four different tip clearance heights. A detailed comparison of the leakage flow’s loss; mass flow rate; and the tip leakage vortex and its roll-up, trajectory, size, and interaction with the passage flow was made. The results show that the performance of the cascade changes more severely as the tip clearance height increases with the moving end wall than with the stationary end wall. The roll-up of the tip leakage vortex has been studied by analyzing the pathline structure and vorticity distribution. An alternative explanation is proposed for the initial roll-up mechanism of the tip leakage vortex. The vorticity transport is responsible for the initial roll-up of the vortex, whereas the leakage jet/passage flow shearing is responsible for the vortex development. The smaller the clearance height is, the easier it is for the moving end wall to alter the vorticity transport from the gap to the tip leakage vortex.
- 1 January 2024
- Published by AIP Publishing in AIP Advances
- Vol. 14 (1)
Open AccessEffect of moving end wall on tip leakage flow in a compressor cascade with different clearance heights
Numerical simulations have been carried out to investigate the effect of the moving end wall on the tip leakage flow structure in a compressor cascade with four different tip clearance heights. A detailed comparison of the leakage flow’s loss; mass flow rate; and the tip leakage vortex and its roll-up, trajectory, size, and interaction with the passage flow was made. The results show that the performance of the cascade changes more severely as the tip clearance height increases with the moving end wall than with the stationary end wall. The roll-up of the tip leakage vortex has been studied by analyzing the pathline structure and vorticity distribution. An alternative explanation is proposed for the initial roll-up mechanism of the tip leakage vortex. The vorticity transport is responsible for the initial roll-up of the vortex, whereas the leakage jet/passage flow shearing is responsible for the vortex development. The smaller the clearance height is, the easier it is for the moving end wall to alter the vorticity transport from the gap to the tip leakage vortex.