Bo Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Bo Zhang has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
- Yong Zhang
School of Electronic Science and Engineering, University of Electronic Science and Technology of China, Chengdu, China
17 shared publications - Huali Zhu
School of Electronic Science and Engineering, University of Electronic Science and Technology of China, Chengdu, China
13 shared publications Bo Yan
School of Electronic Science and Engineering, University of Electronic Science and Technology of China, Chengdu, China
5 shared publications- Zhang Dang
School of Electronic Engineering, Chengdu Technological University, Chengdu, China
5 shared publications Ruimin Xu
School of Electronic Science and Engineering, University of Electronic Science and Technology of China,Chengdu,China
3 shared publications- Xuanming Zhang
Institute of Applied Electronics, China Academy of Engineering Physics
3 shared publications
Latest Publications
- 12 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 16 (2) , 421-428
A Miniaturized and Reassembled 500-GHz Transmitter Front End Utilizing 3-D Vertical Integration Technology
In this paper, a 500-GHz transmitter front-end based on 3D vertical integration technology is proposed, which not only realizes the miniaturization of terahertz front-end system, but also enables the reassembly between front-end system and sub-circuits for flexible debugging. The front-end contains a 167-GHz frequency doubler, a 167-GHz power amplifier (PA) and a 500-GHz frequency tripler, which are designed in different metal layers. In the layered vertical transition, waveguide chokes are employed for minimum electromagnetic leakage. With reassembled configuration, the sub-circuits can be packaged and measured independently. After high-precision manufacturing and assembly, sub-circuits and integrated transmitter front-end were measured. The experimental results reveal that the maximum output power of the 167-GHz frequency doubler and PA module is 78.5 mW. And the peak output power of the front-end is 0.32 mW @ 501 GHz with a minimum conversion loss of 28 dB from 80-90 GHz to 480-540 GHz. The overall volume of the integrated transmitter front-end is only 32 × 20 × 14 mm3, which demonstrate the 3D vertical integration technology has potential for designing the complex and miniaturized terahertz system.
- 12 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 16 (2) , 421-428
A Miniaturized and Reassembled 500-GHz Transmitter Front End Utilizing 3-D Vertical Integration Technology
In this paper, a 500-GHz transmitter front-end based on 3D vertical integration technology is proposed, which not only realizes the miniaturization of terahertz front-end system, but also enables the reassembly between front-end system and sub-circuits for flexible debugging. The front-end contains a 167-GHz frequency doubler, a 167-GHz power amplifier (PA) and a 500-GHz frequency tripler, which are designed in different metal layers. In the layered vertical transition, waveguide chokes are employed for minimum electromagnetic leakage. With reassembled configuration, the sub-circuits can be packaged and measured independently. After high-precision manufacturing and assembly, sub-circuits and integrated transmitter front-end were measured. The experimental results reveal that the maximum output power of the 167-GHz frequency doubler and PA module is 78.5 mW. And the peak output power of the front-end is 0.32 mW @ 501 GHz with a minimum conversion loss of 28 dB from 80-90 GHz to 480-540 GHz. The overall volume of the integrated transmitter front-end is only 32 × 20 × 14 mm3, which demonstrate the 3D vertical integration technology has potential for designing the complex and miniaturized terahertz system.
- 1 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (10) , 1626-1629
A Reconfigurable 500-GHz Receiver Front-End Based on 3-D Vertical Integration Technology
- 1 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (10) , 1626-1629
A Reconfigurable 500-GHz Receiver Front-End Based on 3-D Vertical Integration Technology
- 28 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 15 (5) , 940-943
A Compact and Broadband Waveguide-to-GCPW Transition for 260–400 GHz Large-Width TMIC
In this letter, a novel broadband transition from grounded coplanar waveguide to rectangular waveguide for large-width terahertz monolithic integrated circuit (TMIC) is proposed. This transition utilizes a dipole antenna with asymmetrical coupling probe to eliminate the additional parasitic effects caused by off-chip interconnect transition technology thereby achieving low-loss performance. In addition, periodic metal pins are utilized to address the resonances of large-width TMIC. Compared with traditional dipole transition, the proposed structure has enhanced the broadband coupling efficiency. Fabricated on 50-μm indium phosphide (InP) substrate, the back-to-back transition achieves a return loss of better than 12 dB with an average insertion loss of 4.72 dB across 272–400 GHz.
- 28 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 15 (5) , 940-943
A Compact and Broadband Waveguide-to-GCPW Transition for 260–400 GHz Large-Width TMIC
In this letter, a novel broadband transition from grounded coplanar waveguide to rectangular waveguide for large-width terahertz monolithic integrated circuit (TMIC) is proposed. This transition utilizes a dipole antenna with asymmetrical coupling probe to eliminate the additional parasitic effects caused by off-chip interconnect transition technology thereby achieving low-loss performance. In addition, periodic metal pins are utilized to address the resonances of large-width TMIC. Compared with traditional dipole transition, the proposed structure has enhanced the broadband coupling efficiency. Fabricated on 50-μm indium phosphide (InP) substrate, the back-to-back transition achieves a return loss of better than 12 dB with an average insertion loss of 4.72 dB across 272–400 GHz.
- 13 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 15 (3) , 487-495
A Low-Loss Sub-THz Radial Power Divider Based on Circularly Polarized TE11 Mode
In this article, a 12-way radial power divider at sub-THz frequencies has been presented. The radial divider is based on circularly polarized TE11 ($\text{TE}_{{11}}^{\text{CP}}$) mode and features low insertion loss. By simplifying the $\text{TE}_{{11}}^{\text{CP}}$-mode transducer and minimizing waveguide flanges, the diameter of the power divider has been reduced to only 28 mm with a height of 17.35 mm. The measured insertion loss averages only 0.3 dB in the frequency range of 209–231 GHz. The isolation between the output ports almost always exceeds 10 dB, and the input return loss is better than 17.8 dB.
- 13 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 15 (3) , 487-495
A Low-Loss Sub-THz Radial Power Divider Based on Circularly Polarized TE11 Mode
In this article, a 12-way radial power divider at sub-THz frequencies has been presented. The radial divider is based on circularly polarized TE11 ($\text{TE}_{{11}}^{\text{CP}}$) mode and features low insertion loss. By simplifying the $\text{TE}_{{11}}^{\text{CP}}$-mode transducer and minimizing waveguide flanges, the diameter of the power divider has been reduced to only 28 mm with a height of 17.35 mm. The measured insertion loss averages only 0.3 dB in the frequency range of 209–231 GHz. The isolation between the output ports almost always exceeds 10 dB, and the input return loss is better than 17.8 dB.
- 27 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 15 (1) , 133-136
An Isolated H-Plane Terahertz Waveguide T-Junction With Corrugated Microstrip Loads
In this letter, a broadband and isolated H-plane terahertz waveguide T-junction is presented for terahertz power combination applications. Thereinto, the high isolation characteristic is realized by inserting two corrugated microstrip (CM) loads via antisymmetric probes. Additionally, a simple and robust rectangular matching structure is utilized to achieve broadband impedance matching. The entire power divider is manufactured in three metal blocks to avoids high-loss H-plane splitting and to simplify load assembly. The measured results show that the average insertion loss is 1 dB, the input return loss is better than -15 dB and the output isolation is above 13 dB over the frequency range of 270-400 GHz.
- 27 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 15 (1) , 133-136
An Isolated H-Plane Terahertz Waveguide T-Junction With Corrugated Microstrip Loads
In this letter, a broadband and isolated H-plane terahertz waveguide T-junction is presented for terahertz power combination applications. Thereinto, the high isolation characteristic is realized by inserting two corrugated microstrip (CM) loads via antisymmetric probes. Additionally, a simple and robust rectangular matching structure is utilized to achieve broadband impedance matching. The entire power divider is manufactured in three metal blocks to avoids high-loss H-plane splitting and to simplify load assembly. The measured results show that the average insertion loss is 1 dB, the input return loss is better than -15 dB and the output isolation is above 13 dB over the frequency range of 270-400 GHz.
- 17 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1072-1074
A Novel Circularly Polarized TE21 Mode Converter for Radial Power Combination Applications
This paper presents a novel circularly polarized (CP) TE21 mode converter for radial power combination applications. To obtain the desired CP TE 21 mode, the rectangular waveguide TE10 mode is first converted to TE20 mode via a T-shaped waveguide, and the TE20 mode is then rotated by means of an asymmetric stepped septum in the circular waveguide. By adjusting the septum dimension, the output TE21 mode has equal amplitude and 90° phase difference with its polarization degeneracy mode. The resulting CP TE21 mode can be fed into the radial power divider/combiner to realize equal power division/combination. The whole structure is very compact and the waveguide path is short, which theoretically can achieve higher efficiency. The proposed TEcp21 mode converter is preliminarily designed with a 12-way radial power divider in the 420–480 GHz band, the simulation results show its feasibility.
- 17 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1072-1074
A Novel Circularly Polarized TE21 Mode Converter for Radial Power Combination Applications
This paper presents a novel circularly polarized (CP) TE21 mode converter for radial power combination applications. To obtain the desired CP TE 21 mode, the rectangular waveguide TE10 mode is first converted to TE20 mode via a T-shaped waveguide, and the TE20 mode is then rotated by means of an asymmetric stepped septum in the circular waveguide. By adjusting the septum dimension, the output TE21 mode has equal amplitude and 90° phase difference with its polarization degeneracy mode. The resulting CP TE21 mode can be fed into the radial power divider/combiner to realize equal power division/combination. The whole structure is very compact and the waveguide path is short, which theoretically can achieve higher efficiency. The proposed TEcp21 mode converter is preliminarily designed with a 12-way radial power divider in the 420–480 GHz band, the simulation results show its feasibility.
- 29 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (5) , 2792-2800
A 330-GHz TE₁₁-Mode Radial Power Combiner With Nickel SSPPs Waveguide Terminations
This article presents a broadband and efficient TE $_{\mathbf{11}}$ -mode radial power divider/combiner with a septum polarizer and a waveguide termination for terahertz power combination applications. In the design, a waveguide termination based on double nickel spoof surface plasmon polaritons (SSPPs) is first developed to improve the polarizer performance. Benefit from the stopband reflection characteristics and high ohmic loss of nickel SSPPs, and the inherent 3-dB loss of a two-way power divider, the waveguide termination demonstrates an electromagnetic absorptivity of more than 98% within 260–375 GHz. Thereafter, a septum polarizer with integrated waveguide termination is proposed to generate the circularly polarized TE $_{\mathbf{11}}$ ( $\text{TE}_{11}^{\text{CP}}$ ) mode. By inserting the septum into the waveguide transition, the bandwidth is widened, and the compactness is improved. Furthermore, by shortening the interconnection length between the polarizer and the divider, the in-band TM $_{\mathbf{01}}$ -mode resonance is reduced. In addition, parallel choke grooves are employed for the radial divider to reduce H -plane waveguide loss. The experimental results of the back-to-back radial combiner reveal that the return loss is greater than 16 dB, and the average insertion loss is 1.3 dB in the 280–380 GHz band, indicating a high combining efficiency of 86.1% and a wide bandwidth of 30.3%.
- 29 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (5) , 2792-2800
A 330-GHz TE₁₁-Mode Radial Power Combiner With Nickel SSPPs Waveguide Terminations
This article presents a broadband and efficient TE $_{\mathbf{11}}$ -mode radial power divider/combiner with a septum polarizer and a waveguide termination for terahertz power combination applications. In the design, a waveguide termination based on double nickel spoof surface plasmon polaritons (SSPPs) is first developed to improve the polarizer performance. Benefit from the stopband reflection characteristics and high ohmic loss of nickel SSPPs, and the inherent 3-dB loss of a two-way power divider, the waveguide termination demonstrates an electromagnetic absorptivity of more than 98% within 260–375 GHz. Thereafter, a septum polarizer with integrated waveguide termination is proposed to generate the circularly polarized TE $_{\mathbf{11}}$ ( $\text{TE}_{11}^{\text{CP}}$ ) mode. By inserting the septum into the waveguide transition, the bandwidth is widened, and the compactness is improved. Furthermore, by shortening the interconnection length between the polarizer and the divider, the in-band TM $_{\mathbf{01}}$ -mode resonance is reduced. In addition, parallel choke grooves are employed for the radial divider to reduce H -plane waveguide loss. The experimental results of the back-to-back radial combiner reveal that the return loss is greater than 16 dB, and the average insertion loss is 1.3 dB in the 280–380 GHz band, indicating a high combining efficiency of 86.1% and a wide bandwidth of 30.3%.
- 3 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 34 (6) , 591-594
Wideband In-Line Waveguide-to-Microstrip Transition With Antisymmetric Rectangular Probes
In this letter, a simple and clear in-line waveguide-to-microstrip (MS) transition using a pair of antisymmetric rectangular probes is presented for monolithic millimeter-wave integrated circuit (MMIC) packaging. The two rectangular probes are arranged on both sides of a substrate within the $E$ -plane waveguide. The probe tips are close to two sides of the waveguide and their roots overlap, which help them gradually rotate the coupled $E$ -field from the waveguide into the microstrip. The probe tip is one-quarter wavelength away from the back-short for the maximum $E$ -field coupling. Moreover, quarter-wavelength lines are used to match the probe to the 50- $\Omega$ line in a wideband. To verify the package effect, the MMIC was replaced by a 50- $\Omega$ microstrip, and a passive back-to-back prototype was demonstrated. In the entire $W$ -band (75–110 GHz), the back-to-back package achieves a return loss of higher than 13 dB with an average insertion loss of 1.29 dB.
- 3 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 34 (6) , 591-594
Wideband In-Line Waveguide-to-Microstrip Transition With Antisymmetric Rectangular Probes
In this letter, a simple and clear in-line waveguide-to-microstrip (MS) transition using a pair of antisymmetric rectangular probes is presented for monolithic millimeter-wave integrated circuit (MMIC) packaging. The two rectangular probes are arranged on both sides of a substrate within the $E$ -plane waveguide. The probe tips are close to two sides of the waveguide and their roots overlap, which help them gradually rotate the coupled $E$ -field from the waveguide into the microstrip. The probe tip is one-quarter wavelength away from the back-short for the maximum $E$ -field coupling. Moreover, quarter-wavelength lines are used to match the probe to the 50- $\Omega$ line in a wideband. To verify the package effect, the MMIC was replaced by a 50- $\Omega$ microstrip, and a passive back-to-back prototype was demonstrated. In the entire $W$ -band (75–110 GHz), the back-to-back package achieves a return loss of higher than 13 dB with an average insertion loss of 1.29 dB.
- 19 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (9) , 5478-5487
A Novel Concept of TE₂₀-Mode 90° Waveguide Twist With Mode Filtering Characteristics
We present a novel TE $_{\text{20}}$ -mode 90 $^{\circ}$ waveguide twist concept for millimeter-wave (mm-wave) and terahertz (THz) applications. This waveguide twist has the unique characteristic of mode filtering; that is, only the desired TE $_{\text{20}}$ mode can be rotated and output, the fundamental TE $_{\text{10}}$ mode, and higher order modes will be reflected. In the design, the input/output (I/O) channels are orthogonal oversized waveguides, the TE $_{\text{20}}$ mode is converted into a cross-waveguide (cross-WG) with gradually changed arm lengths. Broad bandwidth (BW) and high efficiency can be easily achieved in a compact size. To verify the proposed concept, two 160–270-GHz prototypes based on rectangular waveguides (RWGs) and groove gap waveguides (GGWs) were designed, fabricated, and measured. The RWG-based prototype was milled in one metal block, while the GGW-based one was fabricated in two metal split blocks. The measured results reveal that the two prototypes achieve average insertion losses of 0.21 and 0.36 dB for the interested TE $_{\text{20}}$ mode, and minimum suppressions of 45 and 35 dB for the unwanted TE $_{\text{10}}$ mode over the desired frequency band. The features of polarization rotation and mode filtering make the proposed TE $_{\text{20}}$ -mode waveguide twist be a candidate for compact, broadband, and efficient waveguide systems.
- 19 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (9) , 5478-5487
A Novel Concept of TE₂₀-Mode 90° Waveguide Twist With Mode Filtering Characteristics
We present a novel TE $_{\text{20}}$ -mode 90 $^{\circ}$ waveguide twist concept for millimeter-wave (mm-wave) and terahertz (THz) applications. This waveguide twist has the unique characteristic of mode filtering; that is, only the desired TE $_{\text{20}}$ mode can be rotated and output, the fundamental TE $_{\text{10}}$ mode, and higher order modes will be reflected. In the design, the input/output (I/O) channels are orthogonal oversized waveguides, the TE $_{\text{20}}$ mode is converted into a cross-waveguide (cross-WG) with gradually changed arm lengths. Broad bandwidth (BW) and high efficiency can be easily achieved in a compact size. To verify the proposed concept, two 160–270-GHz prototypes based on rectangular waveguides (RWGs) and groove gap waveguides (GGWs) were designed, fabricated, and measured. The RWG-based prototype was milled in one metal block, while the GGW-based one was fabricated in two metal split blocks. The measured results reveal that the two prototypes achieve average insertion losses of 0.21 and 0.36 dB for the interested TE $_{\text{20}}$ mode, and minimum suppressions of 45 and 35 dB for the unwanted TE $_{\text{10}}$ mode over the desired frequency band. The features of polarization rotation and mode filtering make the proposed TE $_{\text{20}}$ -mode waveguide twist be a candidate for compact, broadband, and efficient waveguide systems.
- 9 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (5) , 3118-3129
A Compact and High-Efficiency 220-GHz Power Amplifier Module Based on TE11-Mode Radial Power Combiner
A compact and high-efficiency radial power combination amplifier module operating above 200 GHz is presented in this article. This module integrates TE $_{{10}}$ –TE $_{11}^{\rm CP}$ (circularly polarized TE $_{{11}}$ ) mode converters, eight-way TE $_{{11}}$ -mode radial dividers/combiners, rectangular waveguide (RWG)-to-microstrip (MS) transitions, and eight power amplifier (PA) terahertz monolithic integrated circuits (TMICs). Specifically, a high-performance septum polarizer is unprecedentedly employed as the mode converter for the radial divider. By adopting the gap waveguide technology, strict contact between the adjacent waveguide blocks is not necessary, and a high-efficiency power combination is achieved at such high frequencies. The measured return loss of the passive radial divider/combiner is greater than 14 dB, and the average insertion loss is lower than 0.5 dB in the 200–260 GHz range (26.1%-bandwidth), indicating a combining efficiency of 89.1%. Thereafter, a vertical RWG-to-MS transition with a slotted ring resonator (SRR) is presented to achieve a low-loss TMIC package. Last, the active power combination amplifier module produces a maximum output power of 240 mW at 218 GHz with an average combining efficiency of 80.5% within the band of 200–221 GHz.
- 9 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (5) , 3118-3129
A Compact and High-Efficiency 220-GHz Power Amplifier Module Based on TE11-Mode Radial Power Combiner
A compact and high-efficiency radial power combination amplifier module operating above 200 GHz is presented in this article. This module integrates TE $_{{10}}$ –TE $_{11}^{\rm CP}$ (circularly polarized TE $_{{11}}$ ) mode converters, eight-way TE $_{{11}}$ -mode radial dividers/combiners, rectangular waveguide (RWG)-to-microstrip (MS) transitions, and eight power amplifier (PA) terahertz monolithic integrated circuits (TMICs). Specifically, a high-performance septum polarizer is unprecedentedly employed as the mode converter for the radial divider. By adopting the gap waveguide technology, strict contact between the adjacent waveguide blocks is not necessary, and a high-efficiency power combination is achieved at such high frequencies. The measured return loss of the passive radial divider/combiner is greater than 14 dB, and the average insertion loss is lower than 0.5 dB in the 200–260 GHz range (26.1%-bandwidth), indicating a combining efficiency of 89.1%. Thereafter, a vertical RWG-to-MS transition with a slotted ring resonator (SRR) is presented to achieve a low-loss TMIC package. Last, the active power combination amplifier module produces a maximum output power of 240 mW at 218 GHz with an average combining efficiency of 80.5% within the band of 200–221 GHz.