Yunfei Tian
Research Subjects
Yunfei Tian has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Amardeep Singh
Department of Civil Engineering and Architecture, Changzhou Institute of Technology, Jiangsu, China
1 shared publication - Chang Sun
School of Environment and Architecture, University of Shanghai for Science and Technology, Shanghai 200093, China
1 shared publication Chun Liu
Division of Development, Gansu Electric Power Corporation, State Grid, Lanzhou, China
1 shared publication- Saiyang Zhuo
School of Civil Engineering, Southeast University, Nanjing, China
1 shared publication - Shengjiang Peng
Gansu Electric Power Corp., State Grid, Lanzhou 730030, China
1 shared publication - Shijun Wang
Economy and Technology Research Institute, Gansu Electric Power Company, State Grid, Lanzhou 730050, China
1 shared publication
Latest Publications
- Open Access
- 8 May 2023
- Published by Hindawi Limited in Advances in Civil Engineering
- Vol. 2023, 1-16
Experimental, Numerical, and Analytical Studies of Uniaxial Compressive Behavior of Concrete Confined by Ultra-High-Performance Concrete
This research examines the uniaxial behavior of core concrete, which is confined by a UHPC (ultra-high-performance concrete) shell, through experimental, numerical, and analytical methods. Various configurations, including different UHPC shell shapes, thicknesses, and core concrete compressive strengths, were tested until failure occurred. Results indicate that the UHPC shell altered the failure modes and enhanced the maximum stress and corresponding strain in uniaxial loading. Additionally, in square and rectangular specimens, debonding between the UHPC and NC (normal concrete) interfaces was observed. Furthermore, we constructed numerical models which integrate the concrete damage plasticity model for NC/UHPC and the coupled adhesive-frictional model implemented in cohesive elements. The model accurately reflects the crack and debonding evolution of the tested specimen. Subsequently, an analytical stress-strain model for uniaxial loading was created based on the experimental results. The confining pressure for square/rectangular specimens was determined using Airys function. The validity of the analytical model was verified by comparing its predictions with the experimental results.
- 8 May 2023
- Published by Hindawi Limited in Advances in Civil Engineering
- Vol. 2023, 1-16
Open AccessExperimental, Numerical, and Analytical Studies of Uniaxial Compressive Behavior of Concrete Confined by Ultra-High-Performance Concrete
This research examines the uniaxial behavior of core concrete, which is confined by a UHPC (ultra-high-performance concrete) shell, through experimental, numerical, and analytical methods. Various configurations, including different UHPC shell shapes, thicknesses, and core concrete compressive strengths, were tested until failure occurred. Results indicate that the UHPC shell altered the failure modes and enhanced the maximum stress and corresponding strain in uniaxial loading. Additionally, in square and rectangular specimens, debonding between the UHPC and NC (normal concrete) interfaces was observed. Furthermore, we constructed numerical models which integrate the concrete damage plasticity model for NC/UHPC and the coupled adhesive-frictional model implemented in cohesive elements. The model accurately reflects the crack and debonding evolution of the tested specimen. Subsequently, an analytical stress-strain model for uniaxial loading was created based on the experimental results. The confining pressure for square/rectangular specimens was determined using Airys function. The validity of the analytical model was verified by comparing its predictions with the experimental results.
- Open Access
- 5 May 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (9) , 5552
Crack Propagation and Failure Mechanism of Modeled Recycled Concrete under Shear Stress
In this study, the failure processes of modeled concrete specimens under shear force were studied. To investigate the cracks propagation and failure modes, modeled natural aggregate, modeled recycled aggregate, and modeled brick aggregate were used as coarse aggregate in the modeled concrete. Through digital image correlation (DIC) technology, the displacement field and strain field could be obtained by analyzing the change of the speckle position on the surface of the specimens. It was found that the shear strength of the modeled natural concrete (MNC) was the highest, the modeled recycled concrete (MRC) was the second, and the modeled brick aggregate concrete (MBC) was the lowest and only half of that of MNC. The shear crack of the MNC first appeared at the interface transition zone (ITZ) and propagated, resulting in the shear failure. The shear crack of MRC first appeared in the new ITZ and then expanded to the old ITZ. The shear crack of MBC extended through the brick aggregate. The study also found that, along with the compressive stress trace range, the MNC and the MRC have four vertical compressive strain concentration zones, while the MBC has only two strain concentration zones, which should result from the fact that the elastic modulus of the brick aggregate is lower than the surrounding hardened mortar. Therefore, there are no compressive strain concentration zones near the brick aggregate.
- 5 May 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (9) , 5552
Open AccessCrack Propagation and Failure Mechanism of Modeled Recycled Concrete under Shear Stress
In this study, the failure processes of modeled concrete specimens under shear force were studied. To investigate the cracks propagation and failure modes, modeled natural aggregate, modeled recycled aggregate, and modeled brick aggregate were used as coarse aggregate in the modeled concrete. Through digital image correlation (DIC) technology, the displacement field and strain field could be obtained by analyzing the change of the speckle position on the surface of the specimens. It was found that the shear strength of the modeled natural concrete (MNC) was the highest, the modeled recycled concrete (MRC) was the second, and the modeled brick aggregate concrete (MBC) was the lowest and only half of that of MNC. The shear crack of the MNC first appeared at the interface transition zone (ITZ) and propagated, resulting in the shear failure. The shear crack of MRC first appeared in the new ITZ and then expanded to the old ITZ. The shear crack of MBC extended through the brick aggregate. The study also found that, along with the compressive stress trace range, the MNC and the MRC have four vertical compressive strain concentration zones, while the MBC has only two strain concentration zones, which should result from the fact that the elastic modulus of the brick aggregate is lower than the surrounding hardened mortar. Therefore, there are no compressive strain concentration zones near the brick aggregate.