FDFrank Billy Djupkep Dizeu

Frank Billy Djupkep Dizeu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Frank Billy Djupkep Dizeu has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Multi-Frequency Nonlinear Methods for 3D Shape Measurement of Semi-Transparent Surfaces Using Projector-Camera Systems

    by Frank Billy Djupkep Dizeu, Michel Picard, Marc-Antoine Drouin, Jonathan Boisvert

    Measuring the 3D shape of semi-transparent surfaces with projector-camera 3D scanners is a difficult task because these surfaces weakly reflect light in a diffuse manner, and transmit a large part of the incident light. The task is even harder in the presence of participating background surfaces. The two methods proposed in this paper use sinusoidal patterns, each with a frequency chosen in the frequency range allowed by the projection optics of the projector-camera system. They differ in the way in which the camera-projector correspondence map is established, as well as in the number of patterns and the processing time required. The first method utilizes the discrete Fourier transform, performed on the intensity signal measured at a camera pixel, to inventory projector columns illuminating directly and indirectly the scene point imaged by that pixel. The second method goes beyond discrete Fourier transform and achieves the same goal by fitting a proposed analytical model to the measured intensity signal. Once the one (camera pixel) to many (projector columns) correspondence is established, a surface continuity constraint is applied to extract the one to one correspondence map linked to the semi-transparent surface. This map is used to determine the 3D point cloud of the surface by triangulation. Experimental results demonstrate the performance (accuracy, reliability) achieved by the proposed methods.

  • Open Access

    Using neuromorphic cameras to track quadcopters

    by Terrence Stewart, Marc-Antoine Drouin, Michel Picard, Frank Billy Djupkep, Anthony Orth, Guillaume Gagné


  • Frequency Shift Method: A Technique for 3-D Shape Acquisition in the Presence of Strong Interreflections

    by Frank Billy Djupkep Dizeu, Jonathan Boisvert, Marc-Antoine Drouin, Guy Godin, Maxime Rivard, Guy Lamouche

    This paper presents a structured-light codification technique called Frequency Shift Method which is especially designed for scenes containing strong interreflections. The method works by projecting multiple sine wave patterns having different frequencies. While the phase shift method associates a phase to each column of the projector, in the proposed codification, each column of the projector is uniquely encoded by the frequencies used, and explicitly decoded using the Discrete Fourier Transform. This encoding allows the method to recover all the projector columns that contribute to a camera pixel’s observed intensity. An energy minimization is then used to separate direct and indirect illuminations. Objects presenting diffuse and specular interreflections are considered and our experimental results illustrate the efficiency of our method compared to previously proposed methods.


  • Open Access

    Extracting Unambiguous Drone Signature Using High-Speed Camera

    by Frank Billy Djupkep Dizeu, Michel Picard, Marc-Antoine Drouin, Guillaume Gagne

    In recent years, the use of drones for recreational and commercial activities has grown rapidly due to their affordability and performance. This growing use raises concerns about the threats drones pose to the security of sensitive areas such as airports, prisons, industrial and military facilities. In response to these threats, drones detection methods are being actively developed. In particular, most camera-based methods rely on appearance to perform detection. They are therefore prone to error due to the great similarity between drones and some other flying entities such as birds. However, from a kinematic perspective, unlike birds, drones, especially multicopters, have a propeller rotation speed. The method proposed in this paper uses the propeller rotation speed as the key physical parameter on which to rely to unambiguously distinguish drones from other flying entities. The basic idea consists in using discrete Fourier transform to determine the propellers rotation speed from high frame rate videos, and extracting the propellers induced drone signature as a quantitative camera-based drone signature. The proposed algorithm proceeds as follows: flying entities are continuously tracked in the sky; discrete Fourier transform, applied to the video stream within a time window ending at the current instant (frame), is used to extract the propellers induced drone signature which unambiguously confirm each flying entity as being a drone or not. Experimental results obtained using a consumer-grade camera at a frame rate of 240Hz demonstrate the effectiveness and reliability of the proposed method.


  • Non-destructive testing of objects of complex shape using infrared thermography: rear surface reconstruction by temporal tracking of the thermal front

    by F B Djupkep Dizeu, Denis Laurendeau, Abdelhakim Bendada

    Infrared thermography allows contactless non-destructive testing of objects based on their thermal behavior. Quantitative inspection of an object aims to characterize its internal defects by estimating their size and their depth. In the field, a one-dimensional thermal model has been used for depth estimation. Unfortunately, the methods based on this model become inaccurate when the inspected object has a high thermal diffusivity, a complex shape, or when the defects, like corrosion, have a complex geometry. For such cases, a 3D formulation of the problem is needed. In this paper, we consider the defect characterization as an inverse geometry problem and we propose a new method: the rear surface reconstruction by temporal tracking of the thermal front. The idea is to follow the thermal front while it propagates inside the object. Referring to the duality time-depth, at every moment, the penetration depth of the thermal front can be estimated. As soon as the thermal front reaches the rear surface, a temperature change will be noticeable on the frontal surface. It is then possible to update the internal geometry of the object at each time step in such a way that the difference between the theoretical temperature, obtained by a 3D solver, and the experimental temperature, recorded by an infrared camera, is minimized. The proposed method shows accurate results and can address situations involving rear surfaces with complex geometry and objects with high thermal diffusivity and a complex shape.


  • Open Access

    Mapping of the Indoor Conditions by Infrared Thermography

    by Frank Billy Djupkep Dizeu, Xavier Maldague, Abdelhakim Bendada

    We present an instrumentation devoted to the mapping of indoor ambient conditions by an infrared camera. In addition to a measurement grid composed of several spherical sensors, an infrared camera is used to visualize and quantify the spatial distribution of the air temperature, the air speed, and the mean radiant temperature. A suitable procedure is developed so that from its temperature history recorded by the infrared camera, each sensor can measure, after solving an inverse heat transfer problem, all the three cited parameters. As the sensors are all imaged at the same time by the camera, an interpolation is done with the values they provide; the 2D distribution of each parameter is then obtained. By using a pair of stereoscopic cameras, it is possible to determine the 3D coordinates of each sensor of the measurement grid; consequently, the 3D mapping of the indoor ambient conditions is possible. Two steps are followed and allow us to achieve our goal: the validation of the performance of the sensor in terms of accuracy and reliability, and the validation of the complete experimental procedure which relies on digital image processing and on inverse heat transfer.