ESEvgeny Suleimanov

Evgeny Suleimanov

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Evgeny Suleimanov has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Biocidal Elastic Films Based on Cod Collagen, Pectin, and PMMA Copolymers: Effectiveness in Healing Burn Surfaces in Small Animals

    by Veronika Prodaevich, Anna Soloveva, Petr Peretyagin, Evgenia Salomatina, Victoria Rumyantseva, Natalya Valetova, Diana Fukina, Olga Smirnova, Evgeny Suleimanov, Ludmila Semenycheva

    This work investigates the conditions for obtaining 3D matrix films for wound dressings based on a copolymer of cod collagen (CC), pectin, and methyl methacrylate (MMA). The synthesis was carried out under photocatalytic conditions using the RbTe1.5W0.5O6 oxide, with glycerol as a plasticizer. The development was based on CC-PMMA-pectin hydrogels synthesized in an aqueous dispersion via photocatalysis in the presence of the complex oxide RbTe1.5W0.5O6. The hydrogels were characterized by elemental analysis and electron microscopy. By mixing the hydrogel and glycerol in a 5:1 ratio, plasticized films (CC-PMMA-pectin-glycerol films) were obtained. These films were transparent, homogeneous, elastic, and easily removed from the polymer substrate. In order to assess the stability of the obtained films, their physical and mechanical characteristics were investigated. An increase in the initial polymer content in the solution from 5% to 12% led to a simultaneous increase in tensile strength (from 0.6 MPa to 0.9 MPa) and elongation at break (from 61% to 76%). It was shown that these films are resistant to bacterial action, which is of great importance for the practical use of such wound dressings in non-sterile conditions. In vivo wound healing tests on rats showed complete wound closure (area reduced to 0 cm2 by day 28). Tests of wound healing in rats using new coverings demonstrated high efficiency, providing a rationale for further clinical trials.

  • Open Access

    Evaluation of the Effectiveness and Safety of New Wound Coatings Based on Cod Collagen for Fast Healing of Burn Surfaces

    by Anna Soloveva, Lyudmila Semenycheva, Victoria Rumyantseva, Yulia Kuznetsova, Veronika Prodaevich, Natalia Valetova, Petr Peretyagin, Natalia Didenko, Ksenia Belyaeva, Diana Fukina, et al.

    Wound coatings in the form of sponge plates were obtained based on hydrogels of cod collagen (CC) copolymers. The synthesis of CC copolymers with pectin was carried out in the presence of a triethylbor–hexamethylenediamine (TEB-HMDA) complex, which forms free radicals under reaction conditions, and with polyethylene glycol (PEG) during photocatalysis in the presence of RbTe1.5W0.5O6 oxide under visible-light irradiation with a LED lamp. Evaluation of their effectiveness and safety for rapid healing of wounds and burn surfaces has been conducted on small animals (rats). It has shown significantly higher efficiency in comparison with commercial collagen sponges based on bovine collagen. Coatings based on cod collagen contributed to the normalization of microcirculation levels according to the results of laser Doppler flowmetry and a high rate of reduction in the area of the scalped burn wound according to planimetry. The morphological studies indicate complete epithelialization with the formation of scar tissue in all studied groups of animals. The dynamics of microcirculation parameters indicate the repair of thermal burns during local treatment with wound-healing coatings against the background of normalization of the functioning of the microcirculatory system. It is advisable to use new collagen-based polymer sponge plates to increase the effectiveness of wound treatment of various origins, shorten recovery time, and optimize the course of typical physiological reactions during the wound process in order to accelerate tissue regeneration, as well as reduce mortality.


  • Open Access

    Synthesis of three-dimensional matrices based on collagen–pectin–polyacrylate grafted copolymers using the RbTe1.5W0.5O6 photocatalyst

    by L. L. Semenycheva, V. V. Prodaevich, V. O. Rumyantseva, D. G. Fukina, A. V. Koryagin, N. B. Valetova, O. N. Smirnova, E. V. Suleimanov

    The development of new promising materials of three-dimensional structure from available bioresorbable, biointegrable and biocompatible polymers is in demand and relevant in connection with the intensive development of regenerative medicine. In this work, hydrogels of the grafted copolymers of methyl methacrylate/butyl acrylate onto a mixture of collagen and pectin were obtained during photocatalysis in the presence of a complex oxide RbTe1.5W0.5O6. The characteristics of the synthesis products were obtained by gel penetrating chromatography, elemental analysis, electron microscopy, and biological biocidality tests. The collagen content in an amount of less than 40%, the microstructure of the polymer in the form of a fine-mesh, and the biocidity of the sample films were established. The polymer product was identified on the catalyst surface after the separation of the oxide powder from the aqueous dispersion. The main advantage of such materials is the unique combination of properties of their components assembled into a specific structure. The advantages of the obtained material include, among other things, the environmental advantage of the initial components - natural renewable raw materials: collagen was isolated from cod processing waste, pectin from fruit and vegetable processing waste.


  • Open Access

    Antimicrobial Effect of Submicron Complex Oxide Particles CsTeMoO6 under Visible Light

    by Lyudmila Semenycheva, Vasiliy Smirnov, Olga Smirnova, Andrey Shishkin, Nadezhda Anikina, Diana Fukina, Andrey Koryagin, Evgeny Suleimanov

    The antimicrobial activity of submicron particles of new photocatalytic active complex metal oxide CsTeMoO6 against bacteria Escherichia coli and Staphylococcus aureus and fungi Aspergillus niger and Penicillium chrysogenum (spores and vegetative mycelium) was studied. It has been established that CsTeMoO6 has the antimicrobial activity in both under dark and visible light conditions in relation to all test cultures of microorganisms. The most inhibitory effect of CsTeMoO6 was noted for E. coli. The light enhanced the antimicrobial effect of the test compound against all cultures of bacteria and fungi, which is associated with the presence of photocatalytic activity of CsTeMoO6. The antifungal activity of CsTeMoO6 increased against spores and vegetative mycelium of fungi under light condition, and this effect increased with an increasing duration of time exposure. The different degree of survival rate of the studied microorganisms in the presence of this compound (under both dark and light) may be associated with the physiological and biochemical characteristics of the used microorganisms, including different mechanisms of resistance against complex metal oxide and reactive oxygen species.


  • Open Access

    Photocatalytic Synthesis of Materials for Regenerative Medicine Using Complex Oxides with β-pyrochlore Structure

    by Ludmila Semenycheva, Victoria Chasova, Diana Fukina, Andrey Koryagin, Artem Belousov, Natalia Valetova, Evgeny Suleimanov

    Graft copolymerization of methyl methacrylate onto cod collagen was carried out under visible light irradiation (λ = 400–700 nm) at 20–25 °C using the RbTe1.5W0.5O6, CsTeMoO6, and RbNbTeO6 complex oxides with β-pyrochlore structure as photocatalysts. The as-prepared materials were characterized by X-ray diffraction, scanning electron microscopy, and UV-Vis diffuse reflectance spectroscopy. It was also found that RbNbTeO6 with β-pyrochlore structure was not able to photocatalyze the reaction. Enzymatic hydrolysis of the obtained graft copolymers proceeds with the formation of peptides with a molecular weight (MW) of about 20 and 10 kDa. In contrast to collagen, which decomposes predominantly to peptides with MW of about 10 kDa, the ratio of fractions with MW of about 10 kDa and 20 kDa differs much less, their changes are symbatic, and the content of polymers with MW of more than 20 kDa is about 70% after 1 h in the case of graft copolymers. The data obtained indicate that synthetic fragments grafted to the collagen macromolecule do not prevent the hydrolysis of the peptide bonds but change the rate of polymer degradation. This is important for creating network matrix scaffolds based on graft copolymers by cross-linking peptides, which are products of enzymatic hydrolysis.


  • Open Access

    Synthesis and Characterization of Bi2WxMo1−xO6 Solid Solutions and Their Application in Photocatalytic Desulfurization under Visible Light

    by Artem S. Belousov, Evgeny V. Suleimanov, Alina A. Parkhacheva, Diana G. Fukina, Andrey V. Koryagin, Dmitry N. Titaev, Mikhail A. Lazarev

    Photocatalytic oxidative desulfurization has attracted much attention in recent years due to the continuous tightening of the sulfur content requirements in motor fuels and the disadvantages of the industrial hydrodesulfurization process. This work is devoted to the investigation of the photocatalytic activity of Bi2WxMo1−xO6 solid solutions (x = 1, 0.75, 0.5, 0.25, 0) in the oxidative desulfurization of hydrocarbons under visible light irradiation using hydrogen peroxide as an oxidant. The synthesized photocatalysts were characterized in detail using XRD, SEM, EDS, low-temperature nitrogen adsorption–desorption, and DRS. It was shown that the use of solid solutions Bi2WxMo1−xO6 with x = 0.5–0.75 leads to the complete oxidation of organosulfur compounds to CO2 and H2O within 120 min. The high photocatalytic activity of solid solutions (x = 0.5–0.75) is attributed to their ability to absorb more visible light, the presence of the corner-shared [Mo/WO6] octahedral layers, which may promote the generation and separation of photogenerated charges, and the hierarchical 3D flower-like structure. The reaction mechanism of the desulfurization was also analyzed in this work.


  • Open Access

    Synthesis of a graft copolymer of polybutyl acrylate on fish collagen substratum using the RbTe1.5W0.5O6 complex oxide photocatalyst

    by L. L. Semenycheva, M. A. Uromicheva, V. O. Chasova, D. G. Fukina, A. V. Koryagin, N. B. Valetova, E. V. Suleimanov

    In order to obtain a graft copolymer of polybutyl acrylate (PBA) on the substratum of emulsified fish collagen, RbTe1.5W0.5O6 complex oxide was used as a photocatalyst under visible light irradiation (λ = 400–700 nm). The emulsion was prepared by mixing the monomer and the aqueous collagen solution in a ratio of 1:2. Next, the catalyst was introduced into the resulting mixture, followed by stirring and ultrasound treatment. Before the reaction, the emulsion was bubbled with argon for 15 min. The reaction was carried out in an argon flow with continuous stirring. The radiation source was a 30 W visible light LED lamp placed at a distance of no more than 10 cm from the reaction mixture. At the end of the reaction, the emulsified organic phase was extracted with toluene, followed by phase isolation. In order to isolate the catalyst, the aqueous part of the solution was centrifuged for 30 min. Subsequently, the powder was repeatedly washed in distilled water at a temperature of 50 °C. The washed catalyst was dried, and the surface of the oxide after emulsion polymerization was examined using a scanning electron microscope. For the PBA–collagen graft copolymer emulsion isolated from the aqueous phase, molecular weight characteristics confirming the formation of a graft copolymer were obtained. It was established that the nitrogen content of amino acid residues in the PBA–collagen graft copolymer is significantly lower than in collagen, which indicates the formation of a graft copolymer. An analysis of films and sponges of PBA–collagen graft copolymer samples by scanning electron microscopy (SEM) showed a new structural-relief organization compared to collagen. A SEM analysis of the RbTe1.5W0.5O6 powder surface after the synthesis of the PBA–collagen graft copolymer detected fragments of polymer macromolecules on its surface. This can be explained by the fact that the catalyst used not only is a source of hydroxyl radicals, but сan also participate in the formation of a polymer on the powder surface due to the abstraction of a hydrogen atom from hydroxyl groups on its surface under the action of a hydroxyl radical.


  • Open Access

    Mechanism off the hydrogen atom abstraction from H2S by triplet CrO3, MoO3 and WO3.

    by Konstantin Martyanov, Eugeney Suleimanov, Sergey Zelenstov

    We have investigated mechanism off the hydrogen atom abstraction from H2S by triplet CrO3, MoO3 and WO3 by quantum chemical ub3lyp/lanl2dz method. Activation energy of the CrO3 + H2S, MoO3+H2S, WO3+H2S reactions were calculated as: 2.45 kcal/mol, 2.41 kcal/mol, 2.16 kcal/mol. These values were greater than in the corresponding ones in the singlet state. Beside we have investigated the spin density distribution in the transition states all them calculated. Allocated spin density has said about spin density transition from one oxygen centre to sulfur atom. Transition have been uncompleted (because value sulfur’s spin density was equal 0.429, at the same time spin density on oxygen atom was of 0.631 in the case of the CrO3 + H2S reaction). Transition in the transition state has not led to great change in difference between HOMO and LUMO for all system studied. The mechanism of the reaction have been proposed.