YZYipeng Zhao

Yipeng Zhao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yipeng Zhao has a total of 57 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Strain-tunable piezoelectricity and photogalvanic response in Janus MSiGeN4 (M=Mo, W) monolayers

    by Yaosheng Bai, Yunkang Tang, Liang Ma, Xing Xu, Yicheng Wang, Yipeng Zhao

  • Ferroelectric polarization-reversed band-edge switching in α -In 2 Se 3 /InSe van der Waals heterostructures

    by Junchen Liu, Yaosheng Bai, Liang Ma, Xing Xu, Yicheng Wang, Yipeng Zhao

    Interfacial charge redistribution and ferroelectric polarization are effective approaches for optimizing the electronic structure and optoelectronic properties of two-dimensional van der Waals heterostructures (vdWHs). In this work, first-principles calculations are employed to systematically investigate the polarization-dependent band-edge localization, interfacial charge-transfer behavior, and strain-tunable band alignment of α -In 2 Se 3 /InSe vdWHs. The heterostructures exhibit type-II band alignment, while reversal of the out-of-plane polarization of α -In 2 Se 3 exchanges the dominant layer character of both the conduction-band minimum and valence-band maximum. This polarization-dependent band-edge switching is preserved in representative HSE06 calculations and remains qualitatively unchanged upon inclusion of spin–orbit coupling. Electrostatic potential and charge-density analyses further reveal that polarization reversal reconstructs the interfacial electrostatic environment, as evidenced by charge redistribution and planar-averaged electrostatic potential, which correlates with the observed band-edge switching. Biaxial strain further tunes the relative band-edge energies and, in the upward-polarized BL-InSe heterostructure, drives a type-II-to-type-I transition at large tensile strain. These results clarify the electronic origin and strain robustness of polarization-controlled band-edge switching in α -In 2 Se 3 /InSe vdWHs.

  • Giant modulation of the photogalvanic effect in two-dimensional SnP2S6/CuInP2S6 ferroelectric heterojunctions

    by Yunkang Tang, Liang Ma, Xing Xu, Yicheng Wang, Yipeng Zhao

    The photogalvanic effect (PGE) enables the direct conversion of light into current in non-centrosymmetric materials, providing a promising route toward self-powered optoelectronics devices. However, achieving large and tunable photocurrents in two-dimensional system remains a significant challenge. Here, we demonstrate a giant and hierarchically tunable PGE in a SnP2S6/CuInP2S6 ferroelectric heterojunction through the combined control of device contact symmetry, ferroelectric polarization, and optical polarization. Asymmetric contacts break the spatial inversion symmetry and enhance the photocurrent ∼50× compared with symmetric contacts at 0.8 eV. In addition, switching the ferroelectric polarization of CuInP2S6 leads to an eightfold increase in photocurrent at 2.4 eV. Moreover, circularly polarized light generates a photocurrent that is 13 times larger than that induced by linearly polarized light at the same photon energy. These results demonstrate an effective strategy for achieving giant photocurrent modulation in two-dimensional ferroelectric heterojunctions and provide foundations for high-performance and reconfigurable optoelectronic devices.

  • CuI/ReS 2 van der Waals Heterojunction for Self-Powered Broadband and Polarization-Sensitive Photodetection

    by Shangqing Xu, Cheng Qi, Jinpeng Zhao, Weidong Dai, Liming Zhang, Yipeng Zhao, Yicheng Wang, Xing Xu, Weichang Zhou, Honglai Li, et al.

    Polarization-sensitive photodetectors that simultaneously deliver self-powered operation, broadband response, and high polarization selectivity remain challenging due to intrinsic trade-offs between carrier separation efficiency and anisotropic photoresponse in low-symmetry materials. Here, we report a CuI/ReS2 van der Waals heterojunction photodetector that addresses these challenges through a synergistic approach based on interface-engineered built-in electric fields coupled with intrinsic in-plane anisotropy. The heterojunction enables efficient photocarrier separation, while the dark current is effectively suppressed, resulting in stable self-powered operation. Under 365 nm illumination at zero bias voltage, the photodetector exhibits an open-circuit voltage of −175 mV, a short-circuit current of 25 pA, and a responsivity of 8.02 mA/W. At a bias voltage of 1 V, the photodetector demonstrates broadband photodetection from 365 to 810 nm, with a peak responsivity of 590.59 mA/W, a detectivity of 6.18 × 1010 Jones, an on/off current ratio of 103, and rapid rise and decay times of 7.93 and 8.73 ms. Moreover, the CuI/ReS2 photodetector exhibits polarization sensitivity, achieving a polarization ratio of 2.84 at 660 nm. We demonstrate polarization-encoded imaging, highlighting the capability of the device for real-time optical information processing. This work demonstrates a feasible strategy for integrating self-powered operation, broadband detection, and polarization sensitivity, offering a promising platform for compact intelligent optoelectronic systems.


  • Electric field and strain tunable optoelectronic properties of X 2 Te 3 /WSe 2 (X = Bi, Sb) vertical heterostructures for high-efficiency photovoltaics

    by Weiqi Fu, Simin Yang, Cheng Qi, Yipeng Zhao, Xing Xu, Liang Ma, Shiqing Tang, Yicheng Wang

    In recent years, two-dimensional heterojunctions have attracted widespread attention due to their atomic-scale thickness and tunable electronic properties, showing great potential for next-generation optoelectronic devices. Monolayer WSe 2 possesses a direct bandgap and high carrier mobility, while monolayer X 2 Te 3 (X = Bi, Sb) exhibits a moderate bandgap and favorable semiconductor characteristics, rendering both materials ideal building blocks for high-performance heterostructures. Here, we systematically investigate the electronic and optical properties of vertically stacked X 2 Te 3 /WSe 2 van der Waals heterostructures using first-principles calculations, considering applied electric fields (-0.45 to 0.45 V/Å) and biaxial strain (-5% to 5%). Our results demonstrate that biaxial strain enables continuous bandgap tuning across the visible spectrum for both Bi 2 Te 3 /WSe 2 and Sb 2 Te 3 /WSe 2 heterostructures, offering superior tunability compared to electric fields. At the same time, both Bi 2 Te 3 /WSe 2 and Sb 2 Te 3 /WSe 2 heterostructures maintain an indirect bandgap, while exhibiting predicted power conversion efficiencies of nearly 20% for Bi 2 Te 3 /WSe 2 under -3% strain and 16% for Sb 2 Te 3 /WSe 2 under -5% strain. Moreover, both heterostructures exhibit significantly enhanced and precisely tunable optical absorption compared to their constituent monolayers. This work not only reveals the key interfacial electronic coupling mechanisms, but also provides a theoretical foundation for the design of tunable, high-efficiency two-dimensional optoelectronic devices.

  • Nonvolatile Optoelectronic Synapses and Brain-Inspired Neuromorphic Applications Based on NbOCl 2 /α-In 2 Se 3 Heterojunction

    by Weidong Dai, Cheng Qi, Jinpeng Zhao, Honglai Li, Weichang Zhou, Fang Li, Yipeng Zhao, Yicheng Wang, Xing Xu, Liang Ma, et al.

    Two-dimensional van der Waals heterostructures have emerged as promising candidates for next-generation optoelectronic devices owing to their tunable band structures and strong light-matter interactions. However, achieving high-performance photodetection and neuromorphic functionalities within a single platform remains a major challenge, particularly in controlling distinct charge transport pathways of the same material system. Here, we report a multifunctional NbOCl2/α-In2Se3 heterojunction device that integrates three conductive pathways: a NbOCl2 channel, a hybrid vertical transport channel combining NbOCl2 and α-In2Se3, and an α-In2Se3 surface channel. This unique trichannel design enables efficient parallel carrier transport, resulting in remarkable optoelectronic performance characterized by a high responsivity of 2933 A/W, an ultrahigh external quantum efficiency of 7.67 × 105%, and a detectivity of 2.29 × 1012 Jones. Furthermore, the device exhibited fast photoresponse characteristics, with fast response time of 52 ms and slow decay time of 2122 ms. More importantly, the device demonstrates superior synaptic plasticity with high learning retention of 6.58 μA and low forgetting rate of 0.073, as quantitatively described by the Wickelgren power-law model. Using the optoelectronic synaptic behavior of the device, we simulated learning and forgetting in neural networks, and achieved an accuracy of 92.5% on the MNIST handwritten digit data set. This work highlights the potential of NbOCl2/α-In2Se3 heterostructures as a versatile platform for integrated optoelectronic systems, enabling intelligent sensing and neuromorphic computing.


  • Self-powered broadband photodetector with intelligent sensing based on a mixed-dimensional TiS3/WSe2 van der Waals heterojunction

    by Jinpeng Zhao, Cheng Qi, Yu Jiang, Liming Zhang, Weidong Dai, Mengyu Zhang, Shangqing Xu, Weichang Zhou, Honglai Li, Tiefeng Yang, et al.

    Broadband, high-efficiency, and low-power multifunctional integrated photodetectors are essential for advanced applications, including imaging, optical communication, and remote sensing. Photodetectors based solely on two-dimensional materials still encounter challenges such as limited out-of-plane charge transport, relatively low in-plane carrier mobility, and inadequate photocurrent generation. Here, we report a mixed-dimensional TiS3/WSe2 van der Waals heterojunction photodetector with type-II band alignment, enabling efficient carrier separation. The device achieves broadband detection from 405 to 1050 nm, with a responsivity of 1.61 A/W, an external quantum efficiency of 261.21%, and a specific detectivity of 2.31 × 1011 Jones under a bias voltage of 1 V. Under zero bias, the device exhibits a responsivity of 52 mA/W, a specific detectivity of 1.19 × 1011 Jones, and an open-circuit voltage of 145 mV. Furthermore, integrated with a convolutional neural network, the TiS3/WSe2 photodetector enables handwritten digit recognition accuracies of up to 97.0% under biased operation and 88.7% under self-powered sensing conditions. These results establish the TiS3/WSe2 heterojunction as a promising platform for broadband, low-power, and self-powered intelligent optoelectronics.


  • Interface and Strain Engineering of Band Alignment and Photovoltaic Performance in NbSiN 3 /NbGeN 3 van der Waals Heterostructures

    by Jianfei Wang, Zhiqiang Li, Liang Ma, Yicheng Wang, Xing Xu, Yipeng Zhao

    Interfacial charge redistribution and strain modulation are crucial for tailoring the electronic structure and optoelectronic properties of two-dimensional van der Waals heterostructures. In this work, first-principles calculations are employed to investigate the interface and strain dependent electronic and optical properties of NbSiN3/NbGeN3 heterostructure. The structural stability of various stacking configurations is confirmed through cohesive energy and phonon dispersion analyses, while electrostatic potential profiles reveal the interfacial polarization direction. The Ge/Nb, Ge/Si, and Nb/Si stacking configurations exhibit type-II band alignment, which promotes efficient spatial separation of photoexcited carriers. Especially, the Ge/Si configuration shows exceptionally high hole mobility, reaching 11,318 cm 2 V -1 s -1 along the x direction and 7,297 cm 2 V -1 s -1 along the y direction. Furthermore, biaxial tensile strain effectively tunes the band edges and enhances the photovoltaic response, achieving a maximum theoretical power conversion efficiency of approximately 21.9%. These findings provide physical insight into interface and strain engineered band alignment and offer guidance for designing high-performance ferroelectric and optoelectronic nanodevices.

  • Strain-engineered photogalvanic anisotropy in SnP2X6 (X = S, Se) monolayers for high-performance optoelectronics

    by Yunkang Tang, Liang Ma, Xing Xu, Yicheng Wang, Zhiqiang Li, Yipeng Zhao

    The photogalvanic effect (PGE) in non-centrosymmetric materials can generate stable currents without external bias, holding significant potential for optoelectronic applications. However, the limited absorption range and weak photoresponse in conventional materials have hindered practical applications. Herein, we investigate the strain-engineered PGE in SnP2X6 (X = S, Se) monolayers, a class of chalcogenophosphate materials featuring strong visible-to-near-infrared absorption and intrinsic anisotropy. First-principles calculations reveal that both uniaxial and biaxial strain significantly modulate the electronic structure and lattice asymmetry, leading to a remarkable enhancement in PGE. Notably, the photocurrent exhibits remarkable anisotropy, with the armchair direction response being ∼40 times and ∼4 times stronger than that along the zigzag direction in SnP2Se6 and SnP2S6 monolayers, respectively. Additionally, a 2% tensile strain along the armchair direction enhances the photocurrent by one order of magnitude compared to the unstrained state. These findings not only reveal the underlying mechanism of strain-tuned PGE but also establish SnP2X6 as a versatile platform for designing polarization-sensitive, broadband, and high-efficiency optoelectronic devices.