Andréia Arenari de Siqueira
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Andréia Arenari de Siqueira has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
Guilherme Chagas Cordeiro
2 shared publications- Guilherme Chagas Cordeiro
Universidade Estadual do Norte Fluminense Darcy Ribeiro
2 shared publications - Joaquin Humberto Aquino Rocha
Universidad Mayor de San Simón (UMSS), Cochabamba, Bolivia
2 shared publications - Romildo Dias Toledo Filho
Universidade Federal do Rio de Janeiro
2 shared publications Danúbia Lorena Teixeira
1 shared publication- Helen Francia Vargas Cuba
Universidad privada del valle (univalle)
1 shared publication
Latest Publications
- 12 June 2025
- Published by Springer Nature
- p. 719-737
Reactivity Assessment of Sugarcane Bagasse Ashes: Comparing the R3 Test with Compressive Strength Activity Index
- 12 June 2025
- Published by Springer Nature
- p. 719-737
Reactivity Assessment of Sugarcane Bagasse Ashes: Comparing the R3 Test with Compressive Strength Activity Index
- 7 June 2025
- Published by Springer Nature
- p. 539-550
Self-Healing Concrete: A Systematic Review of the Latin American Databases
- 7 June 2025
- Published by Springer Nature
- p. 539-550
Self-Healing Concrete: A Systematic Review of the Latin American Databases
- Open Access
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Ambiente Construído
- Vol. 25, e140032
Sulfuric acid attack of mortars containing blended cements with sugarcane bagasse ash and limestone filler
The present study evaluated the durability of mortars containing blended cements with sugarcane bagasse ash and limestone filler under sulfuric acid attack. Mortar packing density was predicted using the Compressible Packing Model, and tests for compressive strength, water absorption, and capillarity were conducted alongside microstructural analysis by scanning electron microscopy. Although the mortars had similar packing density values, both supplementary cementitious materials densified the microstructure and reduced gypsum formation after acid attack. While sugarcane bagasse ash improved mechanical performance due to synergistic physical and chemical effects, its pozzolanic activity did not enhance the mortar acid resistance. However, bagasse ash-blended mortars showed notable reductions in water absorption and sorptivity post-acid attack compared to other mixes.
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Ambiente Construído
- Vol. 25, e140032
Open AccessSulfuric acid attack of mortars containing blended cements with sugarcane bagasse ash and limestone filler
The present study evaluated the durability of mortars containing blended cements with sugarcane bagasse ash and limestone filler under sulfuric acid attack. Mortar packing density was predicted using the Compressible Packing Model, and tests for compressive strength, water absorption, and capillarity were conducted alongside microstructural analysis by scanning electron microscopy. Although the mortars had similar packing density values, both supplementary cementitious materials densified the microstructure and reduced gypsum formation after acid attack. While sugarcane bagasse ash improved mechanical performance due to synergistic physical and chemical effects, its pozzolanic activity did not enhance the mortar acid resistance. However, bagasse ash-blended mortars showed notable reductions in water absorption and sorptivity post-acid attack compared to other mixes.
- Open Access
- 3 November 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (21) , 14436
Circular Bioeconomy in the Amazon Rainforest: Evaluation of Açaí Seed Ash as a Regional Solution for Partial Cement Replacement
Açaí seed ash (ASA) is a waste product from processing the açaí fruit and burning the seeds for cogeneration purposes. The present study evaluated the use of ASA from the Brazilian Amazon as partial Portland cement replacement in self-leveling mortars (SLM) for social-interest buildings. The fresh and hardened state properties of mortars were accessed with 5% and 10% ASA content, and a life cycle assessment was performed to evaluate the greenhouse gas (GHG) emissions. The maximum transport distance to enable ASA as a building material was determined by a sensitivity analysis, and specific carbon-efficiency indicators for SLM were proposed and validated. The results showed that using up to 10% ASA as cement replacement was technically and environmentally feasible since the mechanical performance was maintained and GHG emissions decreased up to 8%. The sensitivity analysis revealed that transport efficiency is crucial for ASA applications far from its production area; therefore, it should be evaluated as a regional building material. The work brings an important contribution to regional sustainable development by assessing the characteristics of a residual material and proposing the reuse of waste, reducing GHG emissions from the cement industry, and stimulating the circular bioeconomy in the Brazilian Amazon region.
- 3 November 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (21) , 14436
Open AccessCircular Bioeconomy in the Amazon Rainforest: Evaluation of Açaí Seed Ash as a Regional Solution for Partial Cement Replacement
Açaí seed ash (ASA) is a waste product from processing the açaí fruit and burning the seeds for cogeneration purposes. The present study evaluated the use of ASA from the Brazilian Amazon as partial Portland cement replacement in self-leveling mortars (SLM) for social-interest buildings. The fresh and hardened state properties of mortars were accessed with 5% and 10% ASA content, and a life cycle assessment was performed to evaluate the greenhouse gas (GHG) emissions. The maximum transport distance to enable ASA as a building material was determined by a sensitivity analysis, and specific carbon-efficiency indicators for SLM were proposed and validated. The results showed that using up to 10% ASA as cement replacement was technically and environmentally feasible since the mechanical performance was maintained and GHG emissions decreased up to 8%. The sensitivity analysis revealed that transport efficiency is crucial for ASA applications far from its production area; therefore, it should be evaluated as a regional building material. The work brings an important contribution to regional sustainable development by assessing the characteristics of a residual material and proposing the reuse of waste, reducing GHG emissions from the cement industry, and stimulating the circular bioeconomy in the Brazilian Amazon region.
- Open Access
- 8 May 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (9) , 5683
Sustainable Cements Containing Sugarcane Bagasse Ash and Limestone: Effects on Compressive Strength and Acid Attack of Mortar
Sustainable cements are an important alternative to reduce the environmental impact of the cement industry by lowering the clinker-to-cement ratio with supplementary cementitious materials. In this respect, the present study aimed to evaluate the influence of partial clinker replacement by sugarcane bagasse ash (SCBA) and limestone filler (LF) on the mechanical and durability performance of mortars. Four blended Portland cements were produced with binary and ternary mixes of clinker, SCBA, and LF. An ordinary cement was also produced for comparison purposes. All five cements were characterized and applied in mortars in order to assess compressive strength and water absorption. Next, 28-day specimens were immersed in a sulfuric acid solution for 56 days to investigate deterioration using mass loss, length variation, water absorption, and compressive strength tests. In general, the combination of SCBA and LF produced more sustainable cements with suitable properties, as SCBA improved the mechanical behavior, while LF improved the durability performance of mortars. In this context, ternary mixes with 14% SCBA and 14% LF are indicated for mechanical uses, while 7% SCBA and 14% LF are recommended for durability purposes, as both maintained the respective properties of the reference cement.
- 8 May 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (9) , 5683
Open AccessSustainable Cements Containing Sugarcane Bagasse Ash and Limestone: Effects on Compressive Strength and Acid Attack of Mortar
Sustainable cements are an important alternative to reduce the environmental impact of the cement industry by lowering the clinker-to-cement ratio with supplementary cementitious materials. In this respect, the present study aimed to evaluate the influence of partial clinker replacement by sugarcane bagasse ash (SCBA) and limestone filler (LF) on the mechanical and durability performance of mortars. Four blended Portland cements were produced with binary and ternary mixes of clinker, SCBA, and LF. An ordinary cement was also produced for comparison purposes. All five cements were characterized and applied in mortars in order to assess compressive strength and water absorption. Next, 28-day specimens were immersed in a sulfuric acid solution for 56 days to investigate deterioration using mass loss, length variation, water absorption, and compressive strength tests. In general, the combination of SCBA and LF produced more sustainable cements with suitable properties, as SCBA improved the mechanical behavior, while LF improved the durability performance of mortars. In this context, ternary mixes with 14% SCBA and 14% LF are indicated for mechanical uses, while 7% SCBA and 14% LF are recommended for durability purposes, as both maintained the respective properties of the reference cement.
- Open Access
- 1 January 2022
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 27 (2)
Estudo da produção e execução de argamassas de contrapiso
RESUMO O contrapiso é uma camada do sistema de piso de uma edificação, que é constituída de uma argamassa, geralmente de cimento e areia, cuja principal função, dentre tantas, é regularizar a superfície da base para possibilitar o recebimento do acabamento. Essa camada, que por muitas vezes foi negligenciada nos projetos construtivos e até por estudos científicos na área, atualmente é reconhecida como camada fundamental do sistema de pisos e que requer certas propriedades para o cumprimento adequado de suas funções, principalmente após a implementação da NBR 15575 de desempenho de edificações habitacionais, que trata do conforto acústico e térmico nas edificações. Nesse contexto, o objetivo deste trabalho é realizar uma revisão acerca da produção dessa argamassa e execução do contrapiso, ressaltando os tipos existentes, suas funções, propriedades requeridas e elaborar uma metodologia construtiva. Esse estudo torna-se necessário uma vez que não existem prescrições normativas a respeito das propriedades requeridas para o desempenho adequado dessa argamassa ou para seus parâmetros executivos, que atualmente é elaborada de acordo com uma metodologia empírica e sem padrão construtivo. Isso pode acarretar problemas no desempenho em serviço dos contrapisos, dificultar as pesquisas na área de engenharia com enfoque em sistemas de piso e aumentar o desperdício de materiais em uma obra.
- 1 January 2022
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 27 (2)
Open AccessEstudo da produção e execução de argamassas de contrapiso
RESUMO O contrapiso é uma camada do sistema de piso de uma edificação, que é constituída de uma argamassa, geralmente de cimento e areia, cuja principal função, dentre tantas, é regularizar a superfície da base para possibilitar o recebimento do acabamento. Essa camada, que por muitas vezes foi negligenciada nos projetos construtivos e até por estudos científicos na área, atualmente é reconhecida como camada fundamental do sistema de pisos e que requer certas propriedades para o cumprimento adequado de suas funções, principalmente após a implementação da NBR 15575 de desempenho de edificações habitacionais, que trata do conforto acústico e térmico nas edificações. Nesse contexto, o objetivo deste trabalho é realizar uma revisão acerca da produção dessa argamassa e execução do contrapiso, ressaltando os tipos existentes, suas funções, propriedades requeridas e elaborar uma metodologia construtiva. Esse estudo torna-se necessário uma vez que não existem prescrições normativas a respeito das propriedades requeridas para o desempenho adequado dessa argamassa ou para seus parâmetros executivos, que atualmente é elaborada de acordo com uma metodologia empírica e sem padrão construtivo. Isso pode acarretar problemas no desempenho em serviço dos contrapisos, dificultar as pesquisas na área de engenharia com enfoque em sistemas de piso e aumentar o desperdício de materiais em uma obra.
- 1 January 2022
- Published by Elsevier in Construction and Building Materials
- Vol. 317
Properties of binary and ternary mixes of cement, sugarcane bagasse ash and limestone
- 1 January 2022
- Published by Elsevier in Construction and Building Materials
- Vol. 317
Properties of binary and ternary mixes of cement, sugarcane bagasse ash and limestone
- 1 January 2020
- Published by Editora Conhecimento Livre
ESTUDO DA INFLUÊNCIA DO TEMPO DE CURA DA BASE NA ADERÊNCIA DO CONTRAPISO
- 1 January 2020
- Published by Editora Conhecimento Livre
ESTUDO DA INFLUÊNCIA DO TEMPO DE CURA DA BASE NA ADERÊNCIA DO CONTRAPISO
- Open Access
- 20 December 2017
- Published by Faculdade Redentor in REINPEC
- Vol. 3 (2) , 153-163
O USO DA CAMADA POROSA DE ATRITO EM AEROPORTOS
Na aterrissagem de aeronaves em pistas de pouso e decolagem nos períodos chuvosos, onde ocorre o fenômeno da aquaplanagem em pavimentos asfálticos impermeáveis, a pista molhada provoca deslizamento da aeronave pela falta de atrito entre pneu e pavimento, causando instabilidade no avião e consequentemente não oferecendo segurança aos usuários deste modelo de transporte. Este artigo, traz como uma solução a este problema a utilização da camada porosa de atrito (CPA), a qual consiste em um revestimento com alto índices de vazios que proporciona uma drenagem superficial capaz de permitir um melhor atrito entre a roda e superfície de rolamento, mesmo sob condições de clima desfavorável e chuvas. Embora no Brasil a aplicação desse tipo de revestimento não seja algo comum, suas características favorecem a sua implantação principalmente em aeroportos, visando evitar catástrofes relacionadas à presença de águas nas pistas.
- 20 December 2017
- Published by Faculdade Redentor in REINPEC
- Vol. 3 (2) , 153-163
Open AccessO USO DA CAMADA POROSA DE ATRITO EM AEROPORTOS
Na aterrissagem de aeronaves em pistas de pouso e decolagem nos períodos chuvosos, onde ocorre o fenômeno da aquaplanagem em pavimentos asfálticos impermeáveis, a pista molhada provoca deslizamento da aeronave pela falta de atrito entre pneu e pavimento, causando instabilidade no avião e consequentemente não oferecendo segurança aos usuários deste modelo de transporte. Este artigo, traz como uma solução a este problema a utilização da camada porosa de atrito (CPA), a qual consiste em um revestimento com alto índices de vazios que proporciona uma drenagem superficial capaz de permitir um melhor atrito entre a roda e superfície de rolamento, mesmo sob condições de clima desfavorável e chuvas. Embora no Brasil a aplicação desse tipo de revestimento não seja algo comum, suas características favorecem a sua implantação principalmente em aeroportos, visando evitar catástrofes relacionadas à presença de águas nas pistas.