Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Bisheng Wen has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Parameter Identification for Maximum Torque per Ampere Control of Permanent Magnet Synchronous Machines under Magnetic Saturation

    by Mingyu Yan, Bisheng Wen, Qing Cui, Xiaoyan Peng

    This paper applies the identified parameters of permanent magnet synchronous machines (PMSMs) for the maximum torque per ampere control (MTPA) under magnetic saturation. The variation in magnet flux with current is determined using a position offset approach while the variation in q-axis inductance with the current is estimated from the d-axis voltage equation afterward. In addition, the d-axis inductance is estimated at standstill by the injection of a small amplitude of high frequency d-axis current. The curve-fitted results of estimated parameters under different saturation conditions are then employed to aid the derivation of MTPA control law. The proposed method is experimentally verified on two prototype PMSMs. Experimental results show that compared with conventional MTPA schemes using fixed values of magnetic parameters, the proposed method can increase maximum output torque by 2.1% and 3.2% on two prototype PMSMs, respectively.


  • Open Access

    Real-Time Estimation of PMSM Rotor Flux Linkage for EV Application under Steady State and Free-Running Conditions

    by Bisheng Wen, Kan Liu, Jing Zhou, Shichao Zhou, Wei Hu, Yongdan Chen, Chao Huang, Qing Huang

    A method for real-time estimation of rotor flux linkage of permanent-magnet synchronous machines (PMSMs) under both steady state and free-running conditions is proposed in this paper. At steady state, a method for the estimation of rotor flux linkage is proposed based on the injection of variable-period zero-voltage perturbation, of which the accuracy is irrespective of the influence of voltage-source inverter (VSI) nonlinearity. Moreover, for the estimation of rotor flux linkage under free-running condition, due to system inertia after shutdown or fault in the motor driver, an effective approach using history data recorded at different transients of rotor speeds is developed, which has eliminated the influence of VSI nonlinearity during the modeling process. The proposed two methods are experimentally validated on a down-sized PMSM prototyped for electric vehicle application, which shows good performance for the estimation of rotor flux linkage under both steady state and free-running conditions.