HZHu Zhou

Hu Zhou

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hu Zhou has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Multi-Functional Reflection Modulation Design for Multi-RIS Empowered Symbiotic Radios

    by Chao Zhang, Hu Zhou, Ying-Chang Liang, Boon-Hee Soong, Chau Yuen

    This paper investigates a multi-user multiple-input single-output (MU-MISO) symbiotic radio (SR) system empowered by multiple reconfigurable intelligent surfaces (RISs). In this system, each RIS adopts a multi-functional reflection modulation scheme to simultaneously transmit data from Internet of Things (IoT) sensors and enhance the primary transmission. However, allocating all reflected power exclusively to IoT data transmission could compromise the capability of RISs to enhance the primary transmission. To address this issue, we propose a flexible power allocation scheme that partitions the power reflected from the RISs into two components: one for enhancing the primary transmission and the other for supporting IoT communication, fully exploiting the multi-functional potential of RISs. Subsequently, we formulate a joint optimization problem aimed at minimizing the transmit power subject to the rate requirements for both primary and RIS transmissions, involving the joint optimization of the beamforming at the base station (BS) and the reflection modulation design at the RISs. Given the non-convex constraints and the coupled variables within the problem, we develop an alternating optimization algorithm combined with difference-of-convex programming to efficiently solve the problem and determine the power allocation scheme. Furthermore, to reduce computational complexity, we consider uniform power allocation across all reflecting elements and introduce weighted parameters to flexibly balance between assisting primary transmission and supporting IoT communication. Simulation results demonstrate that our proposed power allocation scheme effectively balances the demands of the primary and RIS transmission, significantly reducing the required transmit power.


  • Beamforming Design for Symbiotic Radios Under ADC Dynamic Range and Quantization Noise Constraints

    by Qing Tang, Hu Zhou, Ruizhe Long, Ying-Chang Liang

    This paper investigates a symbiotic radio (SR) system composed of a multi-antenna radio frequency (RF) source, a backscatter device (BD), and a receiver. SR is an energy- and spectrum-efficient technology with great potential to enable passive Internet of Things (IoT). However, due to the double path loss in the reflecting link, the received BD signal is typically much weaker than the received RF source signal. As the dynamic range (DR) of the analog-to-digital converter (ADC) at the receiver is limited, it is challenging to recover the weak BD signal in the presence of a strong RF source signal after quantization. Additionally, when the low-resolution ADC is employed at the receiver, the introduced quantization noise (QN) will further deteriorate the bit error rate (BER) performance of the system. To mitigate these effects, we adopt optimal quantizers at the receiver and derive a linear quantized signal model, which considers practical modulation schemes and decoding processes. Based on this model, we define the DRs of both the ADC and the received signal, and derive analytical BER expressions for both the BD and RF source signals under the effect of QN. Subsequently, we formulate an optimization problem to minimize the BER of the BD signal via transmit beamforming, while accounting for the impact of ADC DR and QN. To solve the fractional optimization problem, we employ Dinkelbach’s algorithm in conjunction with the semidefinite relaxation (SDR) technique. Finally, simulation results demonstrate the effectiveness of the proposed beamforming design method and the performance gains achieved by employing optimal quantizers at the receiver.

  • Joint Beamforming and Adaptive Modulation for Symbiotic Radios With Multiple Antennas

    by Yan Wang, Hu Zhou, Ying-Chang Liang

    Symbiotic radio (SR) is an emerging technology that exhibits high energy and spectral efficiency, where a cooperative receiver is designed to decode the primary and the secondary signals jointly. However, the ambiguity problem for joint detection arises due to the multiplication of the primary and secondary signals, which leads to a degradation in detection performance. To address this problem, the secondary transmitter (STx) could adaptively adjust the modulation scheme based on the channel responses of the direct and the reflecting links. Multiple antennas enable to reconfigure these channel responses through active beamforming at the primary transmitter (PTx) and passive beamforming at the STx, leading to the coupling of the beamforming and the adaptive modulation. Considering this coupling, we propose a joint beamforming and adaptive modulation design scheme for SR systems with multiple antennas. To enhance both the performance of primary and secondary transmissions, we focus on the composite signal, which includes the primary and the secondary signals. Accordingly, we formulate an optimization problem as maximizing the minimum Euclidean distance of the composite signal. This problem involves jointly optimizing the active beamforming at the PTx, along with the adaptive modulation and passive beamforming at the STx, subject to the passive reflection constraint at the STx and the average power constraint at the PTx. As the formulated problem is non-convex, we decompose the original problem into two subproblems, which are then solved iteratively using semi-definite programming and difference-of-convex algorithms. To reduce the computational complexity, we further propose a suboptimal scheme. Moreover, we derive the theoretical symbol error rate for the proposed scheme, gaining insights into the role of active beamforming at the PTx. Finally, simulation results show the superiority of the proposed scheme and verify the accuracy of the theoretical analysis.


  • What Can RISs Do for Symbiotic Radios?

    by Hu Zhou, Ying-Chang Liang, Chau Yuen, Dusit Niyato

    Future wireless networks call for novel spectrum- and energy-efficient technologies. In the past, symbiotic radio (SR) has been proposed as a promising technology, which merges the benefits of cognitive radio and ambient backscatter communications, thus giving rise to mutualistic spectrum sharing and reliable low-power backscattering communications. In this article, we focus on reconfigurable intelligent surface (RIS)-empowered SR in which an RIS plays the dual role of assisting the primary system and transmitting the secondary signal. With this background, we provide a comprehensive overview of RIS-empowered SR, including its typical applications and system architectures in wireless communication. We then introduce the transmission protocols, covering channel estimation, cooperative beamforming and modulation design, and data transmission stages. Following that, we explore various design tradeoffs, challenges, and potential solutions to offer system design insights. Finally, a case study is conducted and future research directions are highlighted for this exciting field.

  • On the Channel Capacity for RIS-Assisted MIMO Symbiotic Radios

    by Qianqian Zhang, Hu Zhou, Ying-Chang Liang

    In reconfigurable intelligent surface (RIS)-assisted symbiotic radios (SRs), an RIS serves not only as a transmitter to deliver its information by reflecting signals from a primary transmitter (PTx) but also as a helper to assist this primary transmission via reconfiguring wireless environments. In this paper, we are interested in an RIS-assisted multiple-input multiple-output (MIMO) SR system, where the RIS has two functions: (1) balancing the channel gains of multiple data streams from the PTx and (2) delivering its own multiple data streams. Considering the passive reflective nature of the RIS, we propose a novel multi-data-stream block delivery scheme, where the reflecting elements of the RIS are segmented into multiple blocks and each block transmits one data stream. The association between the data streams and the corresponding reflecting elements is represented by an indicator matrix. With this information delivery scheme, upper and lower bounds on the sum rate of RIS-assisted MIMO SR are determined and the primary and secondary transmissions’ achievable rates are characterized. Then, we jointly design the transmit covariance matrix at the PTx, the indicator matrix at the RIS, and the passive beamforming vector at the RIS by maximizing the derived upper bound on the sum rate. To show the advantages of RIS-assisted MIMO SR, we examine the traditional precoding matrix-based multi-data-stream delivery scheme of the RIS and explore a special case where the direct link is blocked. Finally, extensive numerical results demonstrate that when the RIS transmits multiple data streams, the system can achieve a higher sum rate compared with the case where the RIS purely enhances the primary transmission, thanks to the additional degree-of-freedom introduced by the RIS transmission.

  • On the Capacity Region of Reconfigurable Intelligent Surface Assisted Symbiotic Radios

    by Qianqian Zhang, Hu Zhou, Ying-Chang Liang, Sumei Sun, Wei Zhang, H. Vincent Poor

    In this paper, we consider a reconfigurable intelligent surface (RIS)-assisted symbiotic radio (SR) system, where an RIS assists a primary transmission by passive beamforming and simultaneously acts as an information transmitter by periodically adjusting its reflection coefficients. Such RIS functions innately enable a new type of communication channel, called multiplicative multiple access channel (M-MAC), where the primary and secondary signals are superposed in a multiplicative manner. To pursue the fundamental performance limits, in this paper, we focus on characterizing the capacity region for the RIS-assisted SR system. Due to the reflection nature of RISs, the signal transmitted from the RIS elements should satisfy a passive reflection constraint. In particular, we consider two types of passive reflection constraints, one for the case that the amplitudes of the reflection coefficients are fixed but the phases are adjustable, while the other for the case that both the amplitudes and the phases can be adjusted. Under the passive reflection constraints at the RIS as well as the average power constraint at the primary transmitter (PTx), we characterize the capacity region of RIS-assisted SR when the direct link from the PTx to the receiver is blocked. It is observed that: 1) the number of sum-rate-optimal points on the boundary of the capacity region is infinite; 2) for the rate pairs with the maximum sum rate, the optimal amplitude distribution of the primary signal is a continuous Rayleigh distribution, while for the remaining rate pairs on the capacity region boundary, the optimal amplitude distribution of the primary signal is discrete; 3) when both the amplitudes and the phases of the reflection coefficients are adjusted for the RIS, the capacity region is enlarged as compared to the phase-adjusted-only case.


  • Partition-Based RIS for MU-MISO Symbiotic Radios

    by Chao Zhang, Hu Zhou, Ruizhe Long, Ying-Chang Liang, Boon-Hee Soong

    This article proposes a partition-based reconfigurable intelligent surface (RIS)-assisted multiuser multiple-input-single-output (MU-MISO) symbiotic radio (SR) system. Unlike conventional RIS designs in SR systems that utilize all elements for secondary transmissions, which restricts its ability to support the primary transmission, the RIS is divided into two subsurfaces: one enhances primary transmissions while the other transmits Internet of Things (IoT) information via spectrum sharing. We formulate a joint optimization problem to minimize transmit power under rate constraints for both primary and IoT transmissions through active beamforming and passive RIS phase-shift design. To tackle the nonconvex constraints and variable coupling in the formulated problem, we propose efficient optimization techniques, including alternating optimization and difference-of-convex methods. Furthermore, we propose a low-complexity interference-free scheme leveraging partitioned RIS to eliminate interuser interference, which is unachievable with conventional RIS design. Simulation results reveal that compared to the conventional scheme, which can be viewed as a special case of partition-based RIS where all the reflecting elements are used to transmit IoT information, partition-based RIS demonstrates superior performance, thereby validating the advantages of RIS partitioning in SR systems.


  • Near-Field Wideband Beamforming for RIS-Assisted THz Communications With FTTDs

    by Chao Zhang, Hu Zhou, Ying-Chang Liang

    Reconfigurable intelligent surface (RIS) has shown its potential in terahertz (THz) communications, due to its capability to expand coverage and compensate for the severe attenuation of THz signals. This paper investigates a large-scale RIS-assisted THz communications system in the near-field. Nevertheless, the beam squint effect of RIS, caused by the frequency-independent phase shifting circuit, results in severe array gain loss across the wide bandwidth. While true time delays (TTDs) that generate frequency-dependent phase shifts can mitigate beam squint, they often suffer from high power consumption. To address the drawback, we introduce a set of fixed true time delays (FTTDs) with low power consumption and low insertion loss for the RIS. These FTTDs, shared by the elements of RIS, can generate frequency-dependent phase shifts, thereby addressing the beam squint effect. To overcome the limitation of FTTDs being unable to change delays, we propose a dynamic architecture that consists of a switch network and two-layer phase shifters, allowing the elements of RIS to select the FTTDs. Subsequently, we analyze the theoretical array gain of the proposed FTTD-equipped RIS and determine the minimum number of FTTDs required for effective mitigation. Then, we formulate a problem of maximizing the achievable rate and propose a two-stage algorithm. Specifically, in the first stage, we obtain the optimal wideband beamforming design for both the BS and the RIS. In the second stage, we approximate this optimal design with the beamforming design from our proposed architecture. Finally, simulation results demonstrate that our proposed RIS design, with a small number of FTTDs, can achieve a near-optimal achievable rate and higher energy efficiency.