Binyun Yan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Binyun Yan has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Weixing Sheng
School of Electronic and Optical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China
13 shared publications - Liangyu Sun
School of Electronic and Optical Engineering, Nanjing University of Science and Technology, Jiangsu, China
4 shared publications - Shuoshuo Song
Shanghai Jiao Tong University
2 shared publications - Ting Shu
Shanghai Jiao Tong University
2 shared publications - Weiwei Zhou
School of Electronic and Optical Engineering, Nanjing 210094, China
2 shared publications - Weiwei Zhou
Key Laboratory of Aerospace Integrated Circuits and Microsystem, Ministry of Industry and Information Technology Nanjing University of Aeronautics and Astronautics Nanjing China
2 shared publications
Latest Publications
- Open Access
- 25 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. PP (15361225) , 1-5
Theoretical Study and Validation for the High-Gain High-Mode-Purity Double Spiral Vortex Electromagnetic Wave Antenna Array
The gain and mode purity of the double spiral vortex electromagnetic (EM) wave antenna array are studied theoretically and validated experimentally for high-gain, high-mode-purity double spiral array designs. A double arm Archimedean spiral array structure is firstly proposed, and the gain and mode purity are analyzed theoretically using numerical methods as its azimuth-dependent radius exhibiting additional azimuthal terms in the field expansion. Theoretically, with the same aperture, the DSA can achieve 12% higher mode purity and a 33.9% smaller physical area compared to a UCA, while maintaining comparable gain. Based on theoretical analysis, a DSA and a UCA with the same aperture are constructed and compared. Measured results of the prototypes are in good agreement with the simulations, further verifying the theoretical analysis. The DSA is a strong candidate for a high-gain, high-mode-purity vortex EM wave antenna array.
- 25 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. PP (15361225) , 1-5
Open AccessTheoretical Study and Validation for the High-Gain High-Mode-Purity Double Spiral Vortex Electromagnetic Wave Antenna Array
The gain and mode purity of the double spiral vortex electromagnetic (EM) wave antenna array are studied theoretically and validated experimentally for high-gain, high-mode-purity double spiral array designs. A double arm Archimedean spiral array structure is firstly proposed, and the gain and mode purity are analyzed theoretically using numerical methods as its azimuth-dependent radius exhibiting additional azimuthal terms in the field expansion. Theoretically, with the same aperture, the DSA can achieve 12% higher mode purity and a 33.9% smaller physical area compared to a UCA, while maintaining comparable gain. Based on theoretical analysis, a DSA and a UCA with the same aperture are constructed and compared. Measured results of the prototypes are in good agreement with the simulations, further verifying the theoretical analysis. The DSA is a strong candidate for a high-gain, high-mode-purity vortex EM wave antenna array.
- 25 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 16 (5) , 929-936
Low-Temperature Au–In Eutectic Bonding With BCB Dam Spacers for Wafer-Level-Packaged RF MEMS Switch Matrices
This article presents the first wafer-level packaged radio frequency Micro-Electro-Mechanical Systems (RF MEMS) nonblocking switch matrix chip, addressing key challenges in high integration, manufacturing, and packaging. Novel integrated planar cross and conductive bond ring architectures eliminate the need for vulnerable 3D air-bridges and additional peripheral inter-wafer connections, respectively. Furthermore, Bisbenzocyclobutene (BCB) dam spacers are introduced not only to ensure precise bonding height control but also to function as overflow reservoirs, effectively absorbing solder non-uniformity, and strengthening reliability. Additionally, a low-temperature 180° Gold-Indium (Au-In) eutectic bonding process ensures compatibility with sensitive MEMS components. This innovative approach achieves a compact switch matrix chip with high integration, simplified fabrication process, and robust performance. Detailed fabrication processes and methods are also presented.
- 25 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 16 (5) , 929-936
Low-Temperature Au–In Eutectic Bonding With BCB Dam Spacers for Wafer-Level-Packaged RF MEMS Switch Matrices
This article presents the first wafer-level packaged radio frequency Micro-Electro-Mechanical Systems (RF MEMS) nonblocking switch matrix chip, addressing key challenges in high integration, manufacturing, and packaging. Novel integrated planar cross and conductive bond ring architectures eliminate the need for vulnerable 3D air-bridges and additional peripheral inter-wafer connections, respectively. Furthermore, Bisbenzocyclobutene (BCB) dam spacers are introduced not only to ensure precise bonding height control but also to function as overflow reservoirs, effectively absorbing solder non-uniformity, and strengthening reliability. Additionally, a low-temperature 180° Gold-Indium (Au-In) eutectic bonding process ensures compatibility with sensitive MEMS components. This innovative approach achieves a compact switch matrix chip with high integration, simplified fabrication process, and robust performance. Detailed fabrication processes and methods are also presented.
- 8 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (1) , 1174-1179
Compact Parametric Expression of the True Array Manifold
The accurate parametric array manifold is the theoretical basis of array signal processing technology. In this paper, a compact parametric model of the true array manifold is proposed. A virtual extended array is established by splitting each antenna into a collection of finite-length dipoles, of which the mutual coupling effect is described using a nonlinear coupling model based on Taylor expansion. The resulting composite manifold has a simple form composed of an expanded virtual isolated manifold and a broad coupling matrix, which can provides an extremely accurate representation of the true array manifold. Numerical examples verify that the accuracy of the proposed composite manifold is two or three orders of magnitude better than that of several other state-of-the-art manifolds. The proposed composite manifold can be applied to all kinds of array signal processing algorithms directly to enhance the capabilities of antenna arrays in practical applications by replacing the overly simplified and imprecise manifold.
- 8 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (1) , 1174-1179
Compact Parametric Expression of the True Array Manifold
The accurate parametric array manifold is the theoretical basis of array signal processing technology. In this paper, a compact parametric model of the true array manifold is proposed. A virtual extended array is established by splitting each antenna into a collection of finite-length dipoles, of which the mutual coupling effect is described using a nonlinear coupling model based on Taylor expansion. The resulting composite manifold has a simple form composed of an expanded virtual isolated manifold and a broad coupling matrix, which can provides an extremely accurate representation of the true array manifold. Numerical examples verify that the accuracy of the proposed composite manifold is two or three orders of magnitude better than that of several other state-of-the-art manifolds. The proposed composite manifold can be applied to all kinds of array signal processing algorithms directly to enhance the capabilities of antenna arrays in practical applications by replacing the overly simplified and imprecise manifold.
- 7 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Letters
- Vol. 22 (1545598X) , 1-5
Sea Clutter Influencing Factors Analysis and Parameter Estimation Based on Oceanographic Observations
Accurate and robust sea clutter modeling and parameter estimation are foundational for target detection. Traditional modeling methods rely on measured data, while clutter modeling based on radar settings and oceanographic observations is an alternative. This letter leverages high-resolution sea clutter data from the Sea-Detecting Radar Data-Sharing Program (SDRDSP) to address this challenge. Three distribution types, which are generalized Pareto distribution (GPD), K distribution, and compound-Gaussian model with inverse Gaussian (CGIG), are considered. Using random forest (RF), we identify the most discriminative factors for distribution type classification: range and azimuth resolution cell (RARC), grazing angle, wave speed, wind speed, and significant wave height (SWH). Building on this, a stacking ensemble learning framework is proposed to effectively regress the shape and scale parameters from these optimized input features. Experiments validate the effectiveness of the proposed approach in distribution type classification and parameter estimation.
- 7 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Letters
- Vol. 22 (1545598X) , 1-5
Sea Clutter Influencing Factors Analysis and Parameter Estimation Based on Oceanographic Observations
Accurate and robust sea clutter modeling and parameter estimation are foundational for target detection. Traditional modeling methods rely on measured data, while clutter modeling based on radar settings and oceanographic observations is an alternative. This letter leverages high-resolution sea clutter data from the Sea-Detecting Radar Data-Sharing Program (SDRDSP) to address this challenge. Three distribution types, which are generalized Pareto distribution (GPD), K distribution, and compound-Gaussian model with inverse Gaussian (CGIG), are considered. Using random forest (RF), we identify the most discriminative factors for distribution type classification: range and azimuth resolution cell (RARC), grazing angle, wave speed, wind speed, and significant wave height (SWH). Building on this, a stacking ensemble learning framework is proposed to effectively regress the shape and scale parameters from these optimized input features. Experiments validate the effectiveness of the proposed approach in distribution type classification and parameter estimation.
- 6 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (9) , 2904-2908
Accurate Parametric Analytic Manifold Using a Nonlinear Mutual Coupling Model
The precise mutual coupling model is the key to obtain an accurate parametric analytic manifold, which is the prerequisite to achieve super-resolution direction of arrival estimation and highprecision beamforming. The widely used mutual coupling model is linear and cannot describe the direction-dependent characteristics of mutual coupling, which leads to serious performance deterioration of array signal processing algorithms. In this letter, a new non-linear mutual coupling model named high-order broad mutual coupling matrix (MCM) is established based on the Taylor expansion to describe the directional dependent coupling relationship between two adjacent antenna elements. Then, an accurate parametric analytic manifold using a finite-order approximation of the high-order broad MCM is yield by the antenna pattern reconstruction method. Numerical examples verify that the array manifold reconstruction errors can be reduced exponentially by the proposed parametric analytic manifold. Especially when the piecewise fitting strategy is adopted, the reconstruction errors of the fourth-order approximated analytic manifold can be reduced to less than 1% of those of the conventional array manifold.
- 6 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (9) , 2904-2908
Accurate Parametric Analytic Manifold Using a Nonlinear Mutual Coupling Model
The precise mutual coupling model is the key to obtain an accurate parametric analytic manifold, which is the prerequisite to achieve super-resolution direction of arrival estimation and highprecision beamforming. The widely used mutual coupling model is linear and cannot describe the direction-dependent characteristics of mutual coupling, which leads to serious performance deterioration of array signal processing algorithms. In this letter, a new non-linear mutual coupling model named high-order broad mutual coupling matrix (MCM) is established based on the Taylor expansion to describe the directional dependent coupling relationship between two adjacent antenna elements. Then, an accurate parametric analytic manifold using a finite-order approximation of the high-order broad MCM is yield by the antenna pattern reconstruction method. Numerical examples verify that the array manifold reconstruction errors can be reduced exponentially by the proposed parametric analytic manifold. Especially when the piecewise fitting strategy is adopted, the reconstruction errors of the fourth-order approximated analytic manifold can be reduced to less than 1% of those of the conventional array manifold.
- 3 June 2025
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 67 (6)
A Compact Frequency‐ and Polarization‐Reconfigurable Circular‐Shaped Shared‐Dipole Antenna
A compact frequency‐ and polarization‐reconfigurable circular‐shaped shared‐dipole antenna is proposed. Arms of the shared dipole are connected by four p‐i‐n diodes, enabling frequency switching between L‐ and S‐bands. The polarization reconfigurability is achieved by feeding the dual‐polarized ports through a reconfigurable feed network. Based on the modified hybrid coupler with an impedance‐matching network, the feed can perform quad‐polarization transmission over a wide bandwidth. The equivalent circuit models of the antenna and the feed are both conducted for analysis. Since the transmitted signal can be canceled from one port to another in a shared dipole, high isolation better than 20 dB is achieved between the two ports. As a result, the circular polarization states share a wider bandwidth with the linear ones. A compact size of 0.49 in diameter is achieved by reusing the dipole arms. Simulation and measurement results show that the antenna is capable of eight operating modes, switching between the L‐band (1.8–1.95 GHz) and the S‐band (2.17–2.5 GHz) with two orthogonal linear and two orthogonal circular polarization states.
- 3 June 2025
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 67 (6)
A Compact Frequency‐ and Polarization‐Reconfigurable Circular‐Shaped Shared‐Dipole Antenna
A compact frequency‐ and polarization‐reconfigurable circular‐shaped shared‐dipole antenna is proposed. Arms of the shared dipole are connected by four p‐i‐n diodes, enabling frequency switching between L‐ and S‐bands. The polarization reconfigurability is achieved by feeding the dual‐polarized ports through a reconfigurable feed network. Based on the modified hybrid coupler with an impedance‐matching network, the feed can perform quad‐polarization transmission over a wide bandwidth. The equivalent circuit models of the antenna and the feed are both conducted for analysis. Since the transmitted signal can be canceled from one port to another in a shared dipole, high isolation better than 20 dB is achieved between the two ports. As a result, the circular polarization states share a wider bandwidth with the linear ones. A compact size of 0.49 in diameter is achieved by reusing the dipole arms. Simulation and measurement results show that the antenna is capable of eight operating modes, switching between the L‐band (1.8–1.95 GHz) and the S‐band (2.17–2.5 GHz) with two orthogonal linear and two orthogonal circular polarization states.
- Open Access
- 22 September 2024
- Published by MDPI AG in Electronics
- Vol. 13 (18) , 3760
A Wideband Polarization-Reconfigurable Antenna Based on Fusion of TM10 and Transformed-TM20 Mode
A wideband polarization-reconfigurable microstrip antenna based on a mode-fusion mechanism is proposed. This simple antenna structure consists of a rectangular radiation patch and a ground, both with crossed slots. The slots crossing the ground are connected by eight PIN diodes and four capacitors such that two orthogonal linear-polarization radiation modes can be realized. The radiation patch is slotted such that a transformed mode is excited, realizing broadside radiation that the traditional mode is unable to. With fusion of the fundamental mode and the transformed- (T-) mode, a wide bandwidth of 30.1% is achieved in two reconfigurable polarizations. The measured results agree well with the simulation results. The total efficiency of the proposed antenna is more than 80.0% over the bandwidth.- 22 September 2024
- Published by MDPI AG in Electronics
- Vol. 13 (18) , 3760
Open AccessA Wideband Polarization-Reconfigurable Antenna Based on Fusion of TM10 and Transformed-TM20 Mode
A wideband polarization-reconfigurable microstrip antenna based on a mode-fusion mechanism is proposed. This simple antenna structure consists of a rectangular radiation patch and a ground, both with crossed slots. The slots crossing the ground are connected by eight PIN diodes and four capacitors such that two orthogonal linear-polarization radiation modes can be realized. The radiation patch is slotted such that a transformed mode is excited, realizing broadside radiation that the traditional mode is unable to. With fusion of the fundamental mode and the transformed- (T-) mode, a wide bandwidth of 30.1% is achieved in two reconfigurable polarizations. The measured results agree well with the simulation results. The total efficiency of the proposed antenna is more than 80.0% over the bandwidth. - Open Access
- 30 May 2024
- Published by Institution of Engineering and Technology (IET) in IET Microwaves, Antennas & Propagation
- Vol. 18 (8) , 578-584
A beamwidth and beam direction reconfigurable antenna based on multi‐mode parasitic coupling
A beamwidth (BW) and beam direction (BD) reconfigurable antenna based on multi‐mode parasitic coupling is proposed. Two pairs of metal strips connected by only two positive‐intrinsic‐negative diodes are added as parasitic structures over the driven element, a circular microstrip patch, constituting a simple antenna design. By controlling the diode switching state, four pattern reconfigurable modes can be realised. Two beam‐pointing deflection modes in the E ‐plane are realised based on the Yagi–Uda principle. Besides, the BW reconfigurability is achieved due to a joint effect of the Yagi principle and beam‐stacking principle. All the reconfigurable modes share a 10% impedance bandwidth from 5.8 to 6.3 GHz. Simulation and measurement results show that the BW can be switched between 67° and 120° in an omni‐directional plane, and the BD can be switched between 0° and ±30° in the E ‐plane.
- 30 May 2024
- Published by Institution of Engineering and Technology (IET) in IET Microwaves, Antennas & Propagation
- Vol. 18 (8) , 578-584
Open AccessA beamwidth and beam direction reconfigurable antenna based on multi‐mode parasitic coupling
A beamwidth (BW) and beam direction (BD) reconfigurable antenna based on multi‐mode parasitic coupling is proposed. Two pairs of metal strips connected by only two positive‐intrinsic‐negative diodes are added as parasitic structures over the driven element, a circular microstrip patch, constituting a simple antenna design. By controlling the diode switching state, four pattern reconfigurable modes can be realised. Two beam‐pointing deflection modes in the E ‐plane are realised based on the Yagi–Uda principle. Besides, the BW reconfigurability is achieved due to a joint effect of the Yagi principle and beam‐stacking principle. All the reconfigurable modes share a 10% impedance bandwidth from 5.8 to 6.3 GHz. Simulation and measurement results show that the BW can be switched between 67° and 120° in an omni‐directional plane, and the BD can be switched between 0° and ±30° in the E ‐plane.