VHVolker Hoffmann

Volker Hoffmann

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Volker Hoffmann has a total of 142 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Tunable Texture in ZnO Thin Films on 200 mm Wafers: Comparative Study of Zn(DMP) 2 and Diethylzinc Precursors for ALD

    by Katherine Guzey, Noah Brechmann, Emad Najafidehaghani, Thomas Gemming, Ivan Kaban, Marcel Schmickler, Jean-Pierre Glauber, Volker Hoffmann, Detlef Rogalla, Nicolás Pérez, et al.

  • Open Access

    Atomic Layer Deposition of Textured ZnO on 200 mm Wafers for Device Applications

    by Katherine Guzey, Noah Brechmann, Emad Najafidehaghani, Thomas Gemming, Ivan Kaban, Marcel Schmickler, Jean-Pierre Glauber, Volker Hoffmann, Detlef Rogalla, Harish Parala, et al.

    Zinc oxide (ZnO) is a technologically important wide-bandgap semiconductor used in optoelectronics, sensing, and transparent electronic devices. Implementing ZnO thin films in such devices requires scalable, uniform, and compatible thin-film deposition methods. Atomic layer deposition (ALD) provides precise control over film thickness, composition, and conformality, and is a well-adapted process in the semiconductor industry. ALD processes for growing ZnO primarily rely on the pyrophoric diethylzinc (DEZ) precursor. Recently, Bis-3-(N,N-dimethylamino)propyl zinc ([Zn(DMP) 2 ]) has emerged as a promising non-pyrophoric alternative, providing improved handling safety and enhanced thermal stability. However, its use has so far been limited to growth on small substrates in proof-of-concept experiments. In this work, a thermal ALD process using [Zn(DMP) 2 ] with H 2 O as precursors was developed on industrially-relevant 200 mm silicon wafers and compared to an established thermal process with DEZ and H 2 O. The effects of deposition temperature (150-300 °C), film thickness, and the underlying substrate material on film growth were systematically investigated. Structural, morphological, chemical, and electrical properties were evaluated using complementary and advanced materials characterization techniques. Across the entire 200 mm wafer area, ZnO films deposited from [Zn(DMP) 2 ] exhibit excellent thickness uniformity and a nearstoichiometric composition comparable to those obtained with DEZ. While slightly higher resistivity and reduced crystallinity are seen at lower deposition temperatures, higher deposition temperatures yield comparable resistivity and an improved c-axis oriented crystalline texture. Importantly, successful lithographic patterning and electrical characterization of van der Pauw devices confirm compatibility with advanced fabrication workflows. These results demonstrate that [Zn(DMP) 2 ] can compete with DEZ in film quality on large-area wafers and is safer to handle, which is a significant advantage overall.

  • Open Access

    VN Thin Films via MOCVD Using a New Vanadium Precursor: Linking Growth Chemistry to Functional Surface Properties

    by Jean‐Pierre Glauber, Julian Lorenz, Ji Liu, Marietta Seifert, Volker Hoffmann, Carlos Abad, Detlef Rogalla, Lars Giebeler, Corinna Harms, Michael Wark, et al.

    Vanadium nitride (VN) is a promising material for many applications, including the electrochemical nitrogen reduction reaction (eNRR). Catalyst nanoengineering enables experimental validation of its predicted eNRR activity, but most VN catalysts are made by using methods that lack precise control. This study introduces a new metalorganic chemical vapor deposition (MOCVD) process for high‐quality, faceted, and crystalline VN thin films. N , N ’‐diisopropylformamidinatovanadate [V(dpfamd) 3 ] is identified as a suitable precursor with favorable thermal properties. Using NH 3 as a co‐reactant yields pure crystalline VN thin films on Si substrates. To investigate structure–property relationships relevant to eNRR, the films are characterized by X‐ray diffraction (XRD), Rutherford backscattering spectrometry combined with nuclear reaction analysis (RBS/NRA), X‐ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Observing NH 3 ’s strong influence during growth, first principles density functional theory (DFT) simulations are performed, supporting an energetically favorable decomposition pathway of [V(dpfamd) 3 ] to VN with NH 3 present. Process transfer from Si to conductive Ti substrates, required for in‐depth electrochemical testing, yields VN thin‐film properties similar to those on Si. Preliminary eNRR measurements indicate a potential correlation between faceting and eNRR activity, highlighting the potential of MOCVD‐grown VN thin films for future eNRR applications.


  • Open Access

    Depth-Resolved Lithium Isotope Fractionation as a Diagnostic of Interphase Evolution and Degradation in Lithium Ion Batteries

    by Beatrice Battistella, Adam Revill, Cornel Venzago, Volker Hoffmann, Leonardo Agudo Jácome, Sebastian Recknagel, Carlos Abad

    Lithium isotopic fractionation is well-established in dynamic geochemical systems; however, its role in lithium-ion batteries (LIBs) remains uninvestigated. Herein, we report the first depth-resolved demonstration that isotopic separation occurs during Li-ion cell operation whose magnitude depends on the cycling history. Using depth-resolved glow discharge mass spectrometry, we monitored the 7Li/6Li ratio in LiNi0.333Mn0.333Co0.333O2 (NMC111)||graphite coin cell electrodes at defined life-cycle stages. Different charging rates were examined to get mechanistic insight into kinetic and thermodynamic control in the fractionation process. Although pristine electrodes exhibit a uniform isotopic ratio, cycled electrodes show a distinct 7Li enrichment in the positive electrode and a corresponding accumulation of 6Li at the surface of the negative electrode. The degree of isotopic separation varies with the charging rate. Isotopic signatures correlate with capacity fading, indicating lithium isotope mapping as a sensitive diagnostic tool for tracking electrode degradation and the evolution of the electrode–electrolyte interphases in LIBs.

  • Open Access

    High Quality Crystalline VN Thin Films via MOCVD from a New Vanadium Precursor: Linking Growth Chemistry to Functional Catalytic Surfaces

    by Jean-Pierre Glauber, Julian Lorenz, Ji Liu, Marietta Seifert, Volker Hoffmann, Carlos Abad, Detlef Rogalla, Corinna Harms, Michael Wark, Michael Nolan, et al.

    Vanadium nitride (VN) has been identified as a promising material for numerous applications including electrochemical nitrogen reduction reaction (eNRR). For such applications, catalyst nanoengineering will help to experimentally test its theoretically predicted eNRR activity, but the majority of investigated VN catalysts are prepared by fabrication methods that do not allow for nanoengineering to the required degree. Herein, we report on a new metalorganic chemical vapor deposition (MOCVD) process for the growth of high quality, facetted and crystalline VN thin films relevant for eNRR applications. N,N’-diisopropylformamidinato [V(dpfamd)3] was identified as a promising precursor as it possesses favorable thermal properties relevant for MOCVD. The application of [V(dpfamd)3] in a MOCVD process with NH3 as co-reactant yielded crystalline VN thin films on Si substrates with high compositional purity. With the potential of using the catalytic activity of VN towards eNRR, the structure-property correlation is of relevance and in this context, the thin films were subjected to complementary analysis including X-ray diffraction (XRD), Rutherford backscattering spectrometry in combination with nuclear reaction analysis (RBS/NRA), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Based on the observation of the significant influence NH3 has on the growth characteristics, we conducted first principles density functional theory (DFT) simulations of the precursor reactivity in the absence and presence of NH3 towards VN, supporting experimental findings of energetically more favorable decomposition of [V(dpfamd)3] to VN in the presence of NH3. Process transfer from Si to conductive Ti substrates, relevant for prospective electrochemical testing, revealed comparable VN thin film properties rendering these films promising for further investigation of eNRR applications in follow up studies.


  • Open Access

    Mechanisms of laminar flow controlled in vitro corrosion of a biodegradable Fe-Mn-C steel

    by Martin Otto, Thomas Hultsch, Viktoriia Shtefan, Volker Hoffmann, Sviatlana V. Lamaka, Thomas Gemming, Annett Gebert, Jochen Fröhlich, Mikhail L. Zheludkevich, Julia Hufenbach


  • Open Access

    How the multi-phase microstructure of a novel tool steel determines its corrosion behaviour in sulphuric acids

    by Viktoriia Shtefan, Annett Gebert, Martin Hantusch, Kai Neufeld, Josephine Zeisig, Lars Giebeler, Volker Hoffmann, Andreas Undisz, Uta Kühn, Julia Kristin Hufenbach


  • Open Access

    Corrosion behavior of an oxide nanotube-coated β-type Ti-45Nb implant alloy in a simulated inflammatory solution

    by Marina Yu. Roshchina, Christine Joy Querebillo, Evgenia Dmitrieva, Andrea Voss, Noel Israel, Thomas Gemming, Lars Giebeler, Stefan Pilz, Stefan Roeher, Volker Hoffmann, et al.


  • Open Access

    One and two-step electrodeposition of composite films of calcium-deficient hydroxyapatite matrix with nanoscale Ag- and Zn-based particles

    by Michael Escobar, Volker Hoffmann, Thomas Gemming, Minsoo Kim, Salvador Pané, Jordi Sort, Eva Pellicer


  • Open Access

    Designing Gallium-Containing Hydroxyapatite Coatings on Low Modulus Beta Ti-45Nb Alloy

    by Jithin Vishnu, Andrea Voss, Volker Hoffmann, Ludovico Andrea Alberta, Adnan Akman, Balakrishnan Shankar, Annett Gebert, Mariana Calin

    Low-modulus β-type Ti-45Nb alloy is a promising implant material due to its good mechanical biocompatibility, non-toxicity, and outstanding corrosion resistance. Its excellent chemical stability brings new challenges to chemical surface modification treatments, which are indispensable for both osteogenesis and antibacterial performance. Coatings containing metal ions as anti-microbial agents can be an effective way to reduce implant-associated infections caused by bacterial biofilm. Gallium ion (Ga3+) has the potential to reduce bacterial viability and biofilm formation on implant surfaces. In this study, a novel two-step process has been proposed for Ga3+ incorporation in hydroxyapatite (HAP) to develop bioactive and antibacterial surfaces on Ti-45Nb alloy. For the generation of bioactive surface states, HAP electrodeposition was conducted, followed by wet chemical immersion treatments in gallium nitrate (1 mM). Different buffers such as phosphate, sodium bicarbonate, ammonium acetate, and citrate were added to the solution to maintain a pH value in the range of 6.5–6.9. Coating morphology and HAP phases were retained after treatment with gallium nitrate, and Ga3+ ion presence on the surface up to 1 wt.% was confirmed. Combining Ga and HAP shows great promise to enable the local delivery of Ga3+ ions and consequent antibacterial protection during bone regeneration, without using growth factors or antibiotics.