Yanming Shen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yanming Shen has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
Dongbin Liu
Department of Chemical Engineering, Shenyang University of Chemical Technology, Liaoning, China
9 shared publicationsLihui Fan
Department of Chemical Engineering, Shenyang University of Chemical Technology, Liaoning, China
8 shared publicationsJunhua Wen
Department of Chemical Engineering, Shenyang University of Chemical Technology, Shenyang, China
5 shared publicationsLei Yang
Department of Chemical Engineering, Shenyang University of Chemical Technology, Shenyang, China
3 shared publicationsShifeng Li
School of Chemical Engineering, Shenyang University of Chemical Technology, China
3 shared publications- Shifeng Li
College of Chemical Engineering, Shenyang University of Chemical Technology, Shenyang 110142, China
3 shared publications
Latest Publications
- 15 September 2026
- Published by Springer Nature in Water, Air, & Soil Pollution
- Vol. 237 (22) , 1271
Construction of an S-scheme Heterojunction Bi3NbO7/BiVO4 for Photocatalytic Degradation of Tetracycline
- 15 September 2026
- Published by Springer Nature in Water, Air, & Soil Pollution
- Vol. 237 (22) , 1271
Construction of an S-scheme Heterojunction Bi3NbO7/BiVO4 for Photocatalytic Degradation of Tetracycline
- 2 March 2026
- Published by Springer Nature in Korean Journal of Chemical Engineering
- Vol. 43 (8) , 2291-2304
Synergistic Adsorption-Photocatalytic Degradation of Tetracycline on Bi(OH)3
- 2 March 2026
- Published by Springer Nature in Korean Journal of Chemical Engineering
- Vol. 43 (8) , 2291-2304
Synergistic Adsorption-Photocatalytic Degradation of Tetracycline on Bi(OH)3
- Open Access
- 22 October 2025
- Published by Springer Nature in Research Square
Synergistic Adsorption-Photocatalytic Degradation of Tetracycline on Bi(OH)3
The synergistic adsorption-photocatalytic degradation is a simple and effective method for removal of pollutants from wastewater. In this work, a bismuth-based photocatalyst Bi(OH) 3 was synthesized by hydrothermal method. The adsorption performance was evaluated by investigations of adsorption isotherm, kinetics and effects of photocatalyst dosage, initial TC concentration, solution pH value and adsorption temperature. The results showed that Bi(OH) 3 rapidly and effectively adsorbed and activated TC though hydrogen bonding, electrostatic interaction, the pore filling mechanism, which were originated from the plenty of OHˉ in the structure. The total TC removal of 92% by synergistic adsorption-photocatalysis was obtained at condition as photocatalyst dosage of 0.5 g/L, initial TC concentration of 50 mg/L, pH of about 5. This work provides an alternative way to remove antibiotics such as TC in wastewater.
- 22 October 2025
- Published by Springer Nature in Research Square
Open AccessSynergistic Adsorption-Photocatalytic Degradation of Tetracycline on Bi(OH)3
The synergistic adsorption-photocatalytic degradation is a simple and effective method for removal of pollutants from wastewater. In this work, a bismuth-based photocatalyst Bi(OH) 3 was synthesized by hydrothermal method. The adsorption performance was evaluated by investigations of adsorption isotherm, kinetics and effects of photocatalyst dosage, initial TC concentration, solution pH value and adsorption temperature. The results showed that Bi(OH) 3 rapidly and effectively adsorbed and activated TC though hydrogen bonding, electrostatic interaction, the pore filling mechanism, which were originated from the plenty of OHˉ in the structure. The total TC removal of 92% by synergistic adsorption-photocatalysis was obtained at condition as photocatalyst dosage of 0.5 g/L, initial TC concentration of 50 mg/L, pH of about 5. This work provides an alternative way to remove antibiotics such as TC in wastewater.
- 18 April 2025
- Published by Springer Nature in Korean Journal of Chemical Engineering
- Vol. 42 (10) , 2309-2319
Combination of CuO with Bi3NbO7 for Boosting Photocatalytic Performance Under Visible Light
- 18 April 2025
- Published by Springer Nature in Korean Journal of Chemical Engineering
- Vol. 42 (10) , 2309-2319
Combination of CuO with Bi3NbO7 for Boosting Photocatalytic Performance Under Visible Light
- Open Access
- 25 March 2025
- Published by Springer Nature in Research Square
Construction of The Heterojunction with Basic Bismuth Nitrates and CuCr-Cl-LDH for Enhanced Photocatalytic Degradation of Tetracycline Under Visible-light
Layered double hydroxides (LDH) present advantages in photocatalytic degradation of organic pollutants due to excellent adsorption capacity, special layered structure, robust responsiveness to ultraviolet and visible light, etc. In order to improve the utilization efficiency of photo-generated charges, in this work, we combined basic bismuth nitrates (BBN) with CuCr-Cl-LDH to fabricate a heterojunction composite. The target heterojunction was synthesized by hydrothermal method. The resulted composites were characterized by techniques such as XRD, XPS, SEM, TEM, UV–vis DRS, BET and electrochemical performance test. The structure, morphology, optical and electrochemical performance were discussed. The results showed that the combination of BBN and CuCr-Cl-LDH formed the S-scheme heterojunction, promoting the separation of electrons and holes and remarkably improving the photocatalytic activity of CuCr-Cl-LDH. The composite that prepared by combination of 7.95 g of Bi (NO3)3·5H2O with 1 g of CuCr-Cl-LDH presented the optimal photocatalytic degradation efficiency of 96% after 2 h irradiation by visible-light at condition as photocatalyst dosage of 0.5 g·L–1 and initial tetracycline (TC) concentration of 20 mg·L–1. During the photocatalytic degradation process, the main active radicals were h+, followed by •O2–, and •OH took a relative weak role. After use of 3 cycles, the heterojunction remained the photocatalytic efficiency of 82%, showing a preliminary feasibility to application in wastewater treatment.
- 25 March 2025
- Published by Springer Nature in Research Square
Open AccessConstruction of The Heterojunction with Basic Bismuth Nitrates and CuCr-Cl-LDH for Enhanced Photocatalytic Degradation of Tetracycline Under Visible-light
Layered double hydroxides (LDH) present advantages in photocatalytic degradation of organic pollutants due to excellent adsorption capacity, special layered structure, robust responsiveness to ultraviolet and visible light, etc. In order to improve the utilization efficiency of photo-generated charges, in this work, we combined basic bismuth nitrates (BBN) with CuCr-Cl-LDH to fabricate a heterojunction composite. The target heterojunction was synthesized by hydrothermal method. The resulted composites were characterized by techniques such as XRD, XPS, SEM, TEM, UV–vis DRS, BET and electrochemical performance test. The structure, morphology, optical and electrochemical performance were discussed. The results showed that the combination of BBN and CuCr-Cl-LDH formed the S-scheme heterojunction, promoting the separation of electrons and holes and remarkably improving the photocatalytic activity of CuCr-Cl-LDH. The composite that prepared by combination of 7.95 g of Bi (NO3)3·5H2O with 1 g of CuCr-Cl-LDH presented the optimal photocatalytic degradation efficiency of 96% after 2 h irradiation by visible-light at condition as photocatalyst dosage of 0.5 g·L–1 and initial tetracycline (TC) concentration of 20 mg·L–1. During the photocatalytic degradation process, the main active radicals were h+, followed by •O2–, and •OH took a relative weak role. After use of 3 cycles, the heterojunction remained the photocatalytic efficiency of 82%, showing a preliminary feasibility to application in wastewater treatment.
- Open Access
- 13 July 2018
- Published by BCREC Publishing Group in Bulletin of Chemical Reaction Engineering & Catalysis
- Vol. 13 (3) , 502-511
Enhanced Visible-Light-Driven Photocatalytic Activity of ZnAl Layered Double Hydroxide by Incorporation of Co2+
Co-doped ZnAl layered double hydroxides (LDH) were papered by coprecipitation. The prepared samples were characterized by multiple techniques including X-ray Diffraction (XRD), Brunauer−Emmett−Teller (BET) surface area, Scanning Electronic Microscopy (SEM), Transmission Electron Microscopy (TEM), X-ray Photoelectron Spectroscopy (XPS) and UV−Vis Diffuse-Reflectance Spectroscopy (UV−Vis DRS). The incorporation of Co2+ into the ZnAl LDH sheets as CrO6 octahedron forms a new energy level which contributes for the excitation of electrons under visible light. The doped Co2+ at a reasonable content also serves as photo-generated charges separator and improves the visible light photocatalytic activity of ZnAl LDH. A degradation mechanism based on the hydroxyl radical as the active species was proposed.
- 13 July 2018
- Published by BCREC Publishing Group in Bulletin of Chemical Reaction Engineering & Catalysis
- Vol. 13 (3) , 502-511
Open AccessEnhanced Visible-Light-Driven Photocatalytic Activity of ZnAl Layered Double Hydroxide by Incorporation of Co2+
Co-doped ZnAl layered double hydroxides (LDH) were papered by coprecipitation. The prepared samples were characterized by multiple techniques including X-ray Diffraction (XRD), Brunauer−Emmett−Teller (BET) surface area, Scanning Electronic Microscopy (SEM), Transmission Electron Microscopy (TEM), X-ray Photoelectron Spectroscopy (XPS) and UV−Vis Diffuse-Reflectance Spectroscopy (UV−Vis DRS). The incorporation of Co2+ into the ZnAl LDH sheets as CrO6 octahedron forms a new energy level which contributes for the excitation of electrons under visible light. The doped Co2+ at a reasonable content also serves as photo-generated charges separator and improves the visible light photocatalytic activity of ZnAl LDH. A degradation mechanism based on the hydroxyl radical as the active species was proposed.
- Open Access
- 11 October 2016
- Published by BCREC Publishing Group in Bulletin of Chemical Reaction Engineering & Catalysis
- Vol. 11 (3) , 354-362
Liquid-phase Hydrogenation of Phenol to Cyclohexanone over Supported Palladium Catalysts
The ZSM-5, g-Al2O3, SiO2 and MgO supported Pd-catalysts were prepared for the phenol hydrogenation to cyclohexanone in liquid-phase. The natures of these catalysts were characterized by XRD, N2 adsorption-desorption analysis, H2-TPR, CO2-TPD and NH3-TPD. The catalytic performance of the supported Pd-catalyst for phenol hydrogenation to cyclohexanone is closely related to nature of the support and the size of Pd nanoparticles. The Pd/MgO catalyst which possesses higher basicity shows higher cyclohexanone selectivity, but lower phenol conversion owing to the lower specific surface area. The Pd/SiO2 catalyst prepared by precipitation gives higher cyclohexanone selectivity and phenol conversion, due to the moderate amount of Lewis acidic sites, and the smaller size and higher dispersion of Pd nanoparticles on the surface. Under the reaction temperature of 135 oC and H2 pressure of 1 MPa, after reacting for 3.5 h, the phenol conversion of 71.62% and the cyclohexanone selectivity of 90.77% can be obtained over 0.5 wt% Pd/SiO2 catalyst. Copyright © 2016 BCREC GROUP. All rights reservedReceived: 7th March 2016; Revised: 13rd May 2016; Accepted: 7th June 2016How to Cite: Fan, L., Zhang, L., Shen, Y., Liu, D., Wahab, N., Hasan, M.M. (2016). Liquid-phase Hydrogenation of Phenol to Cyclohexanone over Supported Palladium Catalysts. Bulletin of Chemical Reaction Engineering & Catalysis, 11 (3): 354-362 (doi: 10.9767/bcrec.11.3.575.354-362)Permalink/DOI: http://doi.org/10.9767/bcrec.11.3.575.354-362
- 11 October 2016
- Published by BCREC Publishing Group in Bulletin of Chemical Reaction Engineering & Catalysis
- Vol. 11 (3) , 354-362
Open AccessLiquid-phase Hydrogenation of Phenol to Cyclohexanone over Supported Palladium Catalysts
The ZSM-5, g-Al2O3, SiO2 and MgO supported Pd-catalysts were prepared for the phenol hydrogenation to cyclohexanone in liquid-phase. The natures of these catalysts were characterized by XRD, N2 adsorption-desorption analysis, H2-TPR, CO2-TPD and NH3-TPD. The catalytic performance of the supported Pd-catalyst for phenol hydrogenation to cyclohexanone is closely related to nature of the support and the size of Pd nanoparticles. The Pd/MgO catalyst which possesses higher basicity shows higher cyclohexanone selectivity, but lower phenol conversion owing to the lower specific surface area. The Pd/SiO2 catalyst prepared by precipitation gives higher cyclohexanone selectivity and phenol conversion, due to the moderate amount of Lewis acidic sites, and the smaller size and higher dispersion of Pd nanoparticles on the surface. Under the reaction temperature of 135 oC and H2 pressure of 1 MPa, after reacting for 3.5 h, the phenol conversion of 71.62% and the cyclohexanone selectivity of 90.77% can be obtained over 0.5 wt% Pd/SiO2 catalyst. Copyright © 2016 BCREC GROUP. All rights reservedReceived: 7th March 2016; Revised: 13rd May 2016; Accepted: 7th June 2016How to Cite: Fan, L., Zhang, L., Shen, Y., Liu, D., Wahab, N., Hasan, M.M. (2016). Liquid-phase Hydrogenation of Phenol to Cyclohexanone over Supported Palladium Catalysts. Bulletin of Chemical Reaction Engineering & Catalysis, 11 (3): 354-362 (doi: 10.9767/bcrec.11.3.575.354-362)Permalink/DOI: http://doi.org/10.9767/bcrec.11.3.575.354-362
- Open Access
- 1 January 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (5) , 2064-2072
Removal of Cu2+ from the aqueous solution by tartrate-intercalated layered double hydroxide
The tartrate-intercalated MgAl layered double hydroxide (MgAl-TA LDH) was prepared by ion-exchange method at the acid solution using MgAl-CO3 LDH as the precursor. The adsorption of Cu2+ on MgAl-TA LDH was studied and some influence factors such as contact time, initial Cu2+ concentration, adsorbent dosage, solution pH, and adsorption temperature were investigated. Three kinds of adsorption isotherms (Langmuir model, Freundlich model, and Redlich–Peterson model) were investigated; the results indicated that equilibrium was well described by Langmuir isotherm, predicting the adsorption of Cu2+ on MgAl-TA adsorbents was a monolayer adsorption. The equilibrium kinetic adsorption data were fitted to the pseudo-second order kinetic equation. Furthermore, the adsorption of Cu2+ was controlled mainly by chemical process combined with intra-particle diffusion. Parameters of adsorption thermodynamic suggested that the interaction of Cu2+ adsorbed by MgAl-TA LDH adsorbents was spontaneous and endothermic.
- 1 January 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (5) , 2064-2072
Open AccessRemoval of Cu2+ from the aqueous solution by tartrate-intercalated layered double hydroxide
The tartrate-intercalated MgAl layered double hydroxide (MgAl-TA LDH) was prepared by ion-exchange method at the acid solution using MgAl-CO3 LDH as the precursor. The adsorption of Cu2+ on MgAl-TA LDH was studied and some influence factors such as contact time, initial Cu2+ concentration, adsorbent dosage, solution pH, and adsorption temperature were investigated. Three kinds of adsorption isotherms (Langmuir model, Freundlich model, and Redlich–Peterson model) were investigated; the results indicated that equilibrium was well described by Langmuir isotherm, predicting the adsorption of Cu2+ on MgAl-TA adsorbents was a monolayer adsorption. The equilibrium kinetic adsorption data were fitted to the pseudo-second order kinetic equation. Furthermore, the adsorption of Cu2+ was controlled mainly by chemical process combined with intra-particle diffusion. Parameters of adsorption thermodynamic suggested that the interaction of Cu2+ adsorbed by MgAl-TA LDH adsorbents was spontaneous and endothermic.