Seokchul Lee
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Seokchul Lee has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
- John D. Cressler
Georgia Institute of Technology
2 shared publications - Inchan Ju
Department of Electrical and Computer Engineering, Department of Intelligence Semiconductor Engineering, Ajou University, Suwon, South Korea
1 shared publication
Latest Publications
- Open Access
- 15 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. PP, 1
A Comprehensive Analysis of Bandwidth and Size for Four-Types of Series-Combined Transformer-Based Doherty Output Networks: Theory and Examples
This paper presents theory-based design guidelines for four types of series-combined transformer (SCT)-based Doherty output matching networks to maximize bandwidth (BW). Intuitive, novel approaches to analyzing the series Doherty combiners are proposed. Compared to the previous analysis via only ideal or otherwise insufficient models, this article systematically derives closed-form design equations based on non-ideal transformer-based practical circuit models. With two different combinations of SCT models, and four capacitor configurations, Doherty load modulation is clearly verified for all four types. Furthermore, the design parameters are simplified, and the equations are validated, for both symmetrical and asymmetrical SCT. To anticipate maximum achievable BW and dominant design factors, four design examples of each type are compared using circuit simulation and numerical analysis. The clear trend observed for all four types is that higher magnetic coupling coefficient results in larger fractional BW. It is also demonstrated that the distinct “sweet spots” for the four types, when maximizing BW depend mainly on only 2 or 3 variables, including turn ratios and/or self-inductances. The SCT sizes are also compared by the sum of two transformer dimensions. To validate the circuit model, a design example and design procedure for best practice are provided: a layout-based full-EM structure demonstrates close-to-theoretical BW performance. For further verification, the four types of SCT-based Doherty power amplifiers are simulated and compared.
- 15 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. PP, 1
Open AccessA Comprehensive Analysis of Bandwidth and Size for Four-Types of Series-Combined Transformer-Based Doherty Output Networks: Theory and Examples
This paper presents theory-based design guidelines for four types of series-combined transformer (SCT)-based Doherty output matching networks to maximize bandwidth (BW). Intuitive, novel approaches to analyzing the series Doherty combiners are proposed. Compared to the previous analysis via only ideal or otherwise insufficient models, this article systematically derives closed-form design equations based on non-ideal transformer-based practical circuit models. With two different combinations of SCT models, and four capacitor configurations, Doherty load modulation is clearly verified for all four types. Furthermore, the design parameters are simplified, and the equations are validated, for both symmetrical and asymmetrical SCT. To anticipate maximum achievable BW and dominant design factors, four design examples of each type are compared using circuit simulation and numerical analysis. The clear trend observed for all four types is that higher magnetic coupling coefficient results in larger fractional BW. It is also demonstrated that the distinct “sweet spots” for the four types, when maximizing BW depend mainly on only 2 or 3 variables, including turn ratios and/or self-inductances. The SCT sizes are also compared by the sum of two transformer dimensions. To validate the circuit model, a design example and design procedure for best practice are provided: a layout-based full-EM structure demonstrates close-to-theoretical BW performance. For further verification, the four types of SCT-based Doherty power amplifiers are simulated and compared.
- 9 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 70 (7) , 3524-3533
An Efficient, Broadband SiGe HBT Non-Uniform Distributed Power Amplifier Leveraging a Compact, Two-Section λ/4 Output Impedance Transformer
An efficient, broadband SiGe HBT cascode nonuniform distributed power amplifier (NDPA) is presented for low-cost, fully integrated Si-based phased arrays. Optimum load impedances at each SiGe HBT cascode in a four-stage NDPA core are obtained by scaling the characteristic impedance ($Z_{0}$ ) of the collector transmission lines (TLs) and tapering the SiGe HBT emitter area simultaneously. A novel compact, lumped-element two-section$\lambda $ /4 output impedance transformer (OIT) is proposed to lower the NDPA load impedance ($Z_{L}$ ) from 50 to 25$\Omega $ over more than one decade bandwidth (BW). Each$\lambda $ /4 impedance transformer is realized by four cascaded CLC$\pi $ -networks integrated into a single three-turn symmetric inductor in order to achieve compact size, high passive efficiency, and high LC cutoff frequency ($f_{c}$ ). The systematic design approach of a lumped-element$\lambda $ /4 impedance transformer with an arbitrary$Z_{0}$ is described in detail. The prototype NDPA was fabricated in 0.13-$\mu \text{m}$ SiGe HBT BiCMOS technology. The proposed SiGe HBT cascode NDPA supports both high linearity (HL) and high gain (HG) modes, each suited to a specific application. The NDPA attains a peak power gain of 10.3/12.5 dB, a saturated output power ($P_{\mathrm {out}}$ ) of 21.3/21.5 dBm, and a power added efficiency (PAE) of 12.2%/12.5%–21.6%/22.0% for HL/HG modes, with a 3-dB BW from 1.5 to 24.0 GHz. The NDPA delivers 13.0-dBm average$P_{\mathrm {out}}$ with a PAE of 10.0% at 6-Gbit/s data rate 64 QAM modulation.- 9 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 70 (7) , 3524-3533
An Efficient, Broadband SiGe HBT Non-Uniform Distributed Power Amplifier Leveraging a Compact, Two-Section λ/4 Output Impedance Transformer
An efficient, broadband SiGe HBT cascode nonuniform distributed power amplifier (NDPA) is presented for low-cost, fully integrated Si-based phased arrays. Optimum load impedances at each SiGe HBT cascode in a four-stage NDPA core are obtained by scaling the characteristic impedance ($Z_{0}$ ) of the collector transmission lines (TLs) and tapering the SiGe HBT emitter area simultaneously. A novel compact, lumped-element two-section$\lambda $ /4 output impedance transformer (OIT) is proposed to lower the NDPA load impedance ($Z_{L}$ ) from 50 to 25$\Omega $ over more than one decade bandwidth (BW). Each$\lambda $ /4 impedance transformer is realized by four cascaded CLC$\pi $ -networks integrated into a single three-turn symmetric inductor in order to achieve compact size, high passive efficiency, and high LC cutoff frequency ($f_{c}$ ). The systematic design approach of a lumped-element$\lambda $ /4 impedance transformer with an arbitrary$Z_{0}$ is described in detail. The prototype NDPA was fabricated in 0.13-$\mu \text{m}$ SiGe HBT BiCMOS technology. The proposed SiGe HBT cascode NDPA supports both high linearity (HL) and high gain (HG) modes, each suited to a specific application. The NDPA attains a peak power gain of 10.3/12.5 dB, a saturated output power ($P_{\mathrm {out}}$ ) of 21.3/21.5 dBm, and a power added efficiency (PAE) of 12.2%/12.5%–21.6%/22.0% for HL/HG modes, with a 3-dB BW from 1.5 to 24.0 GHz. The NDPA delivers 13.0-dBm average$P_{\mathrm {out}}$ with a PAE of 10.0% at 6-Gbit/s data rate 64 QAM modulation.