DYDonghui Ye

Donghui Ye

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Donghui Ye has a total of 2 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Three-port Electrical Energy Converters Integrated with Storage for Photovoltaic Systems with Partial Power Regulation

    by Donghui Ye

    This thesis proposes three types of three-port electrical energy converters integrated with storage for photovoltaic (PV) systems with partial power regulation (PPR). In the first type, the proposed energy storage integrated three-port converter (TPC) consists of a buck-boost converter, interposed between the battery energy storage system (BESS) and the DC-AC inverter, in series with PV modules. The buck-boost converter in the proposed TPC is utilized for maximum power point tracking (MPPT) by regulating two power switches. The output power of the proposed converter is regulated by controlling the DC-AC converter. In the second type, an efficient battery-integrated topology is proposed for PV systems with a wide operation range. The proposed circuit comprises a battery integrated buck converter and a buck-boost converter that share a power flow path. The load voltage could be higher or lower than the PV voltage, depending on the operation mode. In the third type, an architecture with several partial power TPCs is proposed, with a series connection of distributed PV systems. Each TPC, connected to a PV panel and BESS, not only can be operated individually to achieve MPPT, utilizing solar energy in an efficient way, but also can work together to fulfil the load voltage and power requirements. In these three topologies, during the battery-charging mode, PPR is employed with a direct power flow path (the series-connection of the PV panel, the battery and the output). As resistances in this path are almost negligible, the power conversion efficiency is higher than existing topologies. The TPC proposed in the first type uses less components, compared to the topologies of the second and third proposals, resulting in higher power conversion efficiency and power density, lower costs and smaller size. Due to employment of load voltage regulator, the output of the proposed topology in the second TPC is regulated at constant voltage during all operation modes. For the third topology, since each PV panel is attached to an individual energy storage integrated TPC, each PV panel can supply its maximum power by implementing an MPPT algorithm, using the solar energy in an efficiency way. The thesis includes simulation and experimental tests to demonstrate circuit operation, effectiveness of control strategies and power conversion efficiencies. RESUMEN Esta tesis propone tres tipos de convertidores de energía eléctrica de tres puertos integrados con almacenamiento para sistemas fotovoltaicos (FV) con regulación parcial de potencia (RPP). En el primer tipo, el convertidor de tres puertos (CTP) integrado con almacenamiento de energía propuesto consiste en un convertidor reductor-elevador, interpuesto entre el sistema de almacenamiento de energía de la batería y el inversor CC-CA, en serie con módulos fotovoltaicos. El convertidor reductor-elevador en el CTP propuesto se utiliza para el seguimiento del punto de máxima potencia (SPMP) mediante el control de dos interruptores. La potencia de salida del convertidor propuesto se regula controlando el convertidor DC-AC. En el segundo tipo, se propone una topología eficiente con batería integrada para sistemas fotovoltaicos con un amplio rango de operación. El circuito propuesto comprende un convertidor reductor con batería integrada y un convertidor reductor-elevador que comparten un camino para el flujo de energía. La tensión de la carga puede ser mayor o menor que la tensión del panel fotovoltaico, dependiendo del modo de operación. En el tercer tipo, se propone una arquitectura con varios CTPs con regulación parcial de potencia, con la conexión en serie de varios sistemas fotovoltaicos distribuidos. Cada CTP, conectado a un panel fotovoltaico y un almacenamiento de energía, no solo puede operarse individualmente para lograr SPMP, utilizando la energía solar de manera eficiente, sino que también puede trabajar complementariamente para cumplir con los requisitos de tensión y potencia de la carga. En estas tres topologías, en el modo de carga de la batería, el RPP utiliza un camino directo para flujo de energía (la conexión en serie del panel fotovoltaico, la batería y la salida). Como las resistencias en este camino son casi insignificantes, la eficiencia de conversión de energía es mayor que la de las topologías existentes. El CTP propuesto en el primer tipo utiliza menos componentes, en comparación con las topologías de las propuestas segunda y tercera, lo que resulta en una mayor eficiencia de conversión de energía y densidad de potencia, menores costos y menor tamaño. Debido al empleo del regulador de tensión de la carga, en la salida de la topología propuesta en el segundo CTP se mantiene la tensión constante en todos los modos de operación. Para la tercera topología, dado que cada panel fotovoltaico está conectado a un CTP integrado con almacenamiento de energía individual, cada panel fotovoltaico puede suministrar su potencia máxima implementando un algoritmo de SPMP, utilizando la energía solar de manera eficiente. La tesis incluye simulaciones y pruebas experimentales para demostrar la operación del circuito, la efectividad de las estrategias de control y las eficiencias de conversión de energía.

  • Open Access

    Alternatives for Connecting Photovoltaic Generators to Power Systems with Three-Port and Partial Power Converters

    by Donghui Ye, Sergio Martinez

    Solar electricity has become one of the most important renewable power sources due to rapid developments in the manufacturing of photovoltaic (PV) cells and power electronic techniques as well as the consciousness of environmental protection. In general, PV panels are connected to DC-DC converters and/or DC-AC inverters to implement the maximum power point tracking algorithm and to fulfill the load requirements. Thus, power conversion efficiency and power density need to be taken into consideration when designing PV systems. Three-port and partial power conversion technologies are proposed to improve the efficiency of a whole PV system and its power density. In this paper, three types of three-port converters (TPCs), including fully isolated, partly isolated, and non-isolated TPCs, are studied with detailed discussions of advantages, disadvantages, and comparisons. In addition, based on partial power conversion technologies, partial power two-port and three-port topologies are analyzed in detail. Their efficiency and power density can be further improved by the combination of three-port and partial power conversion technologies. Moreover, comparisons among seven different types of distributed PV systems are presented with their advantages and disadvantages. Compared to distributed PV systems without energy storage, distributed PV systems with hybridization of energy storage and with partial power regulation can use solar energy in a more efficient way.


  • Open Access

    A Three-Port DC-DC Converter with Partial Power Regulation for a Photovoltaic Generator Integrated with Energy Storage

    by Donghui Ye, Sergio Martinez

    A novel integrated DC-DC converter is proposed for the first stage of two-stage grid connected photovoltaic (PV) systems with energy storage systems. The proposed three-port converter (TPC) consists of a buck–boost converter, interposed between the battery storage system and the DC-AC inverter, in series with PV modules. The buck–boost converter in the proposed TPC is utilized for maximum power point tracking by regulating two power switches. The output power of the proposed converter is regulated by controlling the DC-AC converter. During the battery-charging mode, partial power regulation is employed with a direct power flow path (the series-connection of the PV panel, the battery and the output). As resistances in this path are almost negligible, the power conversion efficiency is higher than existing topologies. During battery-discharging mode, the power conversion is processed through a buck–boost converter with only two active power switches and one inductor. With fewer components, higher power conversion efficiency is also achieved. The circuit operation and analysis are presented in detail. To illustrate the simplicity of the converter control, the performance of the converter is tested with a straightforward maximum power point tracking on a PV system with battery cells. Simulation and experimental tests are carried out to demonstrate circuit operation and power conversion efficiency.


  • Open Access

    Estimation of the Output Characteristic of a Photovoltaic Generator under Power Curtailment and Considering Converter Losses

    by Donghui Ye, Jose Miguel Riquelme-Dominguez, Sergio Martinez

    Power curtailment methods contribute to the frequency stability of power systems with a high share of photovoltaic generation. This paper focuses on an online strategy that estimates the output characteristic of a photovoltaic generator while operating in power curtailment mode by using voltage and current measurements and the nonlinear least-squares curve-fitting. In contrast to previously reported methods, this work introduces an improvement consisting of the estimation of the power losses of the electronic converter that connects the photovoltaic panel with the grid. Thus, the impact of a mismatch between the dc-side and the ac-side is reduced. The procedure is tested at different power levels and with fluctuations of irradiance and temperature. The results show that the converter efficiency, expressed as an exponential function with two quadratic equations, is associated with irradiance and temperature. It is also found that the two-stage converter efficiency is mainly affected by the irradiance level when the photovoltaic system operates on the left side of the power-voltage characteristic. In contrast, the temperature level influences the converter efficiency significantly when working on the right side of the maximum power point. The estimated efficiency curves can improve the accuracy of the power curtailment method and can be used for designing the two-stage converter. The effectiveness of the proposed power curtailment method has been tested in a two-stage photovoltaic system through MATLAB/Simulink.