HLHorst‐Michael Ludwig

Horst‐Michael Ludwig

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Horst‐Michael Ludwig has a total of 45 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Effect of Calcium Sulfate Adjustment on Steel Slag Composite Cements

    by Christopher Hoffmann, Christiane Rößler, Thomas Sowoidnich, Horst Michael Ludwig

    Annually, approximately 200 million tons of steel slag are generated globally, predominantly used in road construction or relegated to landfills. Given its composition, which includes belite—similar to those in Portland cement—steel slag might offer a potential as supplementary cementitious material (SCM). Particularly in China, the largest producer of steel slags, there is a strategic shift towards using recycled industrial by-products as SCM in concrete production, minimizing the extraction of natural resources. However, outside China the adoption of steel slags as SCM is limited due to various challenges. This study explores the hydration behavior of steel slag composite cements, with a special focus on sulfate optimization to address challenges. Previous research indicates that variations in the hydration processes of these composite cements possibly due to various calcium aluminates, known to affect early hydration stages. Therefore, the optimization of calcium sulfate levels in the cement is applied. Employing techniques such as in-situ X-ray diffraction (XRD) analysis and scanning electron microscopy (SEM), this research elucidates the hydration dynamics and evaluates the impact of calcium sulfate across several different levels. The study shows a retarding effect of Basic Oxygen Furnace (BOF) slag on Portland cement reaction, additionally the SCM affect the aluminate reaction, this can be accompanied by an additional setting regulator.

  • Open Access

    Component Additive Approach to Predict Cement Paste Rheology Considering Heterogeneities on Different Scales and Supplementary Cementitious Materials and Their Special Effect on Thixotropy and Concrete De-airing Behaviour (CONCERT & CONCERT-CCair)

    by J. Link, S. Hellmann, B. Strybny, C. Hoffmann, T. Sowoidnich, C. Rößler, T. Gil Díaz, J. Lützenkirchen, F. Heberling, D. Jara Heredia, et al.

    The workability and the de-airing behaviour of fresh concrete are strongly influenced by the cement paste contained therein. The rheological properties of cement pastes and concretes in general are a function of the mix composition, hydration processes, shear history and external influences (such as temperature, vibration etc.). Microscopic interparticle interactions control the macroscopic bulk rheology. In the paper at hand, the results of a 6-year project are described, in which the interactions between particles, between particles and the carrier liquid, as well as superplasticizers and variations in particle inventory and the carrier fluid composition, were studied. The work in the first step yielded in a surface complexation model for a cement paste model system, which allows to predict the particles’ zeta potential and other surface parameters as a function of the ion brine composition. Further, an in-depth analysis of the mechanisms of thixotropy in cementitious suspensions was carried out and a corresponding model was developed. This model is based on the results of combined rheological and tomographical measurements. In doing so, a prediction of the rheological properties of cement suspensions subjected to a complex shear history during the entire lifetime of fresh cement suspension is now possible. The prediction of the rheological properties becomes even more challenging when Ordinary Portland Cement (OPC) is replaced by supplementary cementitious materials (SCMs) like calcined clays, where the clay composition and its calcination conditions significantly influence the flow behaviour and the entire hydration process. The analysis of calcination conditions for varying clay mineralogy and the influence of SCMs on the hydration processes of OPC ensure an extended application of the findings for low-clinker concrete. Concerning the practical application of the results, the effect of the rheological properties of the paste on the de-airing behaviour of concrete was investigated and modelled. A proper de-airing process of fresh concrete can be achieved by tuning the predicted rheological properties of cement paste.

  • Open Access

    Fourier-Based Non-Rigid Slice-to-Volume Registration of Segmented Petrographic LM and CT Scans of Concrete Specimens

    by Mohamed Said Helmy Alabassy, Martin Christian Hampe, Doreen Erfurt, Horst-Michael Ludwig, Andrea Osburg

    Cyclic freezing and thawing (FT) are a primary cause of cracking in concrete, yet current assessment procedures in Germany rely heavily on qualitative estimation using the International Union of Laboratories and Experts in Construction Materials, Systems and Structures (RILEM) capillary suction, internal damage and freeze-thaw (CIF) and Capillary de-icing freeze-thaw (CDF) tests. Although these standard tests provide a general overview of the condition of concrete damage in specimens through the estimation of water saturation through capillary suction, mass of surface delamination, qualitative open surface damage, and relative dynamic modulus of elasticity, they do not take quantitative analysis of voids, including cracks and air pores, directly into account. To address this, we propose a novel workflow utilizing deep learning-based semantic segmentation with Fourier-based slice-to-volume registration by combining 2D light microscopy (LM) of petrographic sections and 3D micro-computed tomography (μCT). We segment cracks, air pores, and aggregates in both modalities and employ feature matching alongside spatial harmonics analysis for 3D shape description. The best proposed 3D registration framework through feature matching demonstrated a success rate of 89.75%, achieving a dissimilarity of 5.21% in relative root mean square error (RRMSE) terms and thereby significantly surpassing the performance of compared 2D-only methods adapted from the body of research. Our approach enables precise, automated, and verifiable quantification of voids across CT and LM modalities and paves the way for advanced computational modeling-based methods to investigate moisture transfer mechanisms for more accurate assessments of frost damage in concrete, service life prediction models, deep learning applications for multimodal data fusion, and more comprehensive FT damage simulations.

  • Open Access

    Fourier-Based Non-Rigid Slice-to-Volume Registration of Segmented Petrographic LM and CT Scans of Concrete Specimens

    by Mohamed Said Helmy Alabassy, Martin Christian Hampe, Doreen Erfurt, Horst-Michael Ludwig, Andrea Osburg

    Cyclic freezing and thawing of concrete specimens are one of the main causes of cracking in concrete. Current procedures for assessing frost resistance of concrete in Germany rely mainly on the CIF and CDF tests that utilise qualitative estimation of cracks. Although these standard tests provide a general overview of the condition of concrete damage through the estimation of water saturation through capillary suction, mass of surface delamination, qualitative open surface damage, and relative dynamic modulus of elasticity, they do not take quantitative analysis of cracks directly into account. To facilitate this quantitative approach, cracks are studied in concrete samples exposed to specific standard cycles of freezing and thawing, then scanned using micro computed tomographic (µCT) imaging, and consequently cut for petrographic thin section analysis. The thin sections are scanned using light microscopy (LM). Deep learning frameworks were deployed to train semantic segmentation models to identify cracks, air pores, aggregate, and cement matrix. Both scanned modalities were co-registered using three experimental variations of varying processing complexity that rely on matching of Fourier-based shape descriptors and underlying features thereof to verify and validate the quality of segmentation inferred for various phases of concrete.

  • Open Access

    A Python tool to determine the thickness of the hydrate layer around clinker grains using SEM‐BSE images

    by Florian Kleiner, Franz Becker, Christiane Rößler, Horst‐Michael Ludwig

    To accurately simulate the hydration process of cementitious materials, understanding the growth rate of C‐S‐H layers around clinker grains is crucial. Nonetheless, the thickness of the hydrate layer shows substantial variation around individual grains, depending on their surrounding. Consequently, it is not feasible to measure hydrate layers manually in a reliable and reproducible manner. To address this challenge, a software has been developed to statistically determine the C‐S‐H thickness, requiring minimal manual interventions for thresholding and for setting limits like particle size or circularity.This study presents a tool, which automatically identifies suitable clinker grains and and perform statistical measurements of their hydrate layer up to a specimen age of 28 days. The findings reveal a significant increase in the C‐S‐H layer, starting from 0.45 after 1 day and reaching 3.04 after 28 days. However, for older specimens, the measurement of the C‐S‐H layer was not feasible due to limited pore space and clinker grains.


  • Aggregate dissolution kinetics

    by Colin Giebson, Katrin Seyfarth, Horst Michael Ludwig

    The alkali–silica reaction (ASR) starts with the dissolution of silica in alkali-reactive aggregates. Besides the thermodynamic basics of silica dissolution, kinetic data are needed to model ASR in order to describe the temporal course of the reaction. Although the dissolution kinetics of silica has been investigated frequently, data for concrete-like environments (pH > 12) and under special influences, such as de-icer impact by sodium chloride (NaCl) or the release of aluminium (Al) from feldspars, are rare or missing. In the present study, long-term (2.5 years) dissolution tests were performed to obtain kinetic data for two types of aggregate (granodiorite, rhyolite) under concrete-like conditions (pH 13.8, with/without calcium hydroxide (Ca(OH)2) and sodium chloride) at temperatures of 25, 45 and 60°C. The findings show that silica dissolution rates effective for ASR differ up to four orders of magnitude, ranging from (log r1) −13.13 to −9.96 mol/m2s as a function of aggregate type, temperature, sodium chloride concentration and calcium hydroxide. Besides a predominant influence of temperature and calcium hydroxide, sodium chloride promotes the dissolution of silica and lowers the aluminium concentration, especially at higher temperatures. The activation energy for silica dissolution (84 ± 4 kJ/mol) did not change significantly in the presence of sodium chloride.


  • Open Access

    The nucleation of C–S–H via prenucleation clusters

    by T. Sowoidnich, D. Damidot, H.-M. Ludwig, J. Germroth, R. Rosenberg, H. Cölfen

    The nucleation and growth of calcium–silicate–hydrate (C–S–H) is of fundamental importance for the strength development and durability of the concrete. However, the nucleation process of C–S–H is still not fully understood. The present work investigates how C–S–H nucleates by analyzing the aqueous phase of hydrating tricalcium silicate (C3S) by applying inductively coupled plasma-optical emission spectroscopy as well as analytical ultracentrifugation. The results show that the C–S–H formation follows non-classical nucleation pathways associated with the formation of prenucleation clusters (PNCs) of two types. Those PNCs are detected with high accuracy and reproducibility and are two species of the 10 in total, from which the ions (with associated water molecules) are the majority of the species. The evaluation of the density and molar mass of the species shows that the PNCs are much larger than ions, but the nucleation of C–S–H starts with the formation of liquid precursor C–S–H (droplets) with low density and high water content. The growth of these C–S–H droplets is associated with a release of water molecules and a reduction in size. The study gives experimental data on the size, density, molecular mass, and shape and outlines possible aggregation processes of the detected species.


  • Open Access

    ASR related service life estimation for concrete pavements

    by K. Seyfarth, C. Giebson, H.M. Ludwig

    In a 5 years study on behalf of the German federal highway research institute (BASt), 71 pavement concretes from 53 highway sections across Germany were examined among other things regarding their residual potential for an alkali-silica reaction (ASR). An empirical approach could be derived for predicting the remaining service life of the concretes. By using earlier correlation data for the climate simulation concrete prism test (CS-CPT) compared to field performance, a translation of the testing period into service life was possible by using a fitted natural exponential function. In the result, the service life of all the pavement concretes could be estimated, ranging from 11 to 51 years, depending on the ASR potential of the concrete mixes with external alkali supply by NaCl de-icer solution. A first agreement between the prediction and the field performance could be found. Further monitoring is supposed to verify and improve the prediction.


  • Open Access

    Quantification of cracks in concrete thin sections considering current methods of image analysis

    by Max Patzelt, Doreen Erfurt, Horst‐Michael Ludwig

    Image analysis is used in this work to quantify cracks in concrete thin sections via modern image processing. Thin sections were impregnated with a yellow epoxy resin, to increase the contrast between voids and other phases of the concrete. By the means of different steps of pre‐processing, machine learning and python scripts, cracks can be quantified in an area of up to 40 cm2. As a result, the crack area, lengths and widths were estimated automatically within a single workflow. Crack patterns caused by freeze‐thaw damages were investigated. To compare the inner degradation of the investigated thin sections, the crack density was used. Cracks in the thin sections were measured manually in two different ways for validation of the automatic determined results. On the one hand, the presented work shows that the width of cracks can be determined pixelwise, thus providing the plot of a width distribution. On the other hand, the automatically measured crack length differs in comparison to the manually measured ones.


  • Open Access

    Hydration and Carbonation of Alternative Binders

    by Bettina Kraft, Rebecca Achenbach, Horst-Michael Ludwig, Michael Raupach

    The cement industry gains increasing public attention because of the high CO2 emissions for which it is accountable. One approach to improve the carbon footprint of cement production is the development of alternative binders, which can be produced with less energy consumption. These alternative binders have a reduced clinker to cement ratio or contain no Portland cement at all. For the corrosion protection of the reinforcement, the same requirements apply as for standardized types of cement. To perform this evaluation, a basic understanding is necessary of the products formed during hydration, the composition of the pore solutions and pore structure, and their influence on the resistance to carbonation. In this study, various alternative binders, such as novel types of composite cement with calcined clays or modified steel mill slag, alkali-activated materials, CS¯A cement, and a C-S-H binder, are presented. The conducted investigations at mortars and cement pastes show the differences in hydration, microstructure development, and pH. The changes in microstructure and phase assemblage due to carbonation and the suitability of carbonation testing at an elevated CO2 content of 1 vol.-% for the different binders are also presented.