Yeonggeun Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Yeonggeun Kim has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
- Hyung Ham Kim
Department of Convergence IT Engineering, Pohang University of Science and Technology, Pohang, Republic of Korea
5 shared publications - Chulhong Kim
Pohang University of Science and Technology (POSTECH)
4 shared publications - Hyojin Kim
Departments of Electrical Engineering, Convergence IT Engineering, and Mechanical Engineering, School of Interdisciplinary Bioscience and Bioengineering, and Medical Device Innovation Center, Pohang University of Science and Technology, Pohang-si, Gyeongsangbuk-do 37673, Republic of Korea
2 shared publications Hyung Ham Kim
Department of Electrical Engineering, Pohang University of Science and Technology, Pohang, Republic of Korea
2 shared publications- Jeongwoo Park
Department of Electrical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, Republic of Korea
2 shared publications - Jin Young Kim
Department of Creative IT Engineering and Electrical Engineering, Pohang University of Science and Technology (POSTECH), 77 Cheongam-ro, Nam-gu, Pohang, Gyeongbuk-do 37673, Korea
2 shared publications
Latest Publications
- 20 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (5) , 8898-8906
Real-Time Ultrasound Imaging System Utilizing Patch-Type Ultrasound Probe for Free-Flap Blood Perfusion Monitoring
In the dynamic landscape of reconstructive surgery, the demand for real-time monitoring systems has become increasingly pronounced. In particular, free-flap procedures, where the vitality of the transferred flap depends on a stable blood supply, have witnessed an increase in the use of such systems. However, traditional monitoring techniques often cannot provide the level of precision and immediacy required to address perfusion issues promptly. Hence, this study developed a real-time ultrasound imaging system using a patch-type ultrasound probe for postoperative monitoring. A miniaturized, patch-type 9.7 MHz, 96-element linear array probe mounted in the housing with a flexible surface was proposed. Consequently, two-dimensional, color Doppler, and spectral Doppler modes were developed for continuous and real-time monitoring of blood flow in the flap. Preclinical evaluation with a mini-pig perforator flap model exhibited successful blood flow monitoring for 24 hours. The proposed continuous ultrasound blood flow monitoring is expected to be efficient, thereby enhancing precision, reducing complications, and improving patient outcomes in reconstructive surgery.
- 20 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (5) , 8898-8906
Real-Time Ultrasound Imaging System Utilizing Patch-Type Ultrasound Probe for Free-Flap Blood Perfusion Monitoring
In the dynamic landscape of reconstructive surgery, the demand for real-time monitoring systems has become increasingly pronounced. In particular, free-flap procedures, where the vitality of the transferred flap depends on a stable blood supply, have witnessed an increase in the use of such systems. However, traditional monitoring techniques often cannot provide the level of precision and immediacy required to address perfusion issues promptly. Hence, this study developed a real-time ultrasound imaging system using a patch-type ultrasound probe for postoperative monitoring. A miniaturized, patch-type 9.7 MHz, 96-element linear array probe mounted in the housing with a flexible surface was proposed. Consequently, two-dimensional, color Doppler, and spectral Doppler modes were developed for continuous and real-time monitoring of blood flow in the flap. Preclinical evaluation with a mini-pig perforator flap model exhibited successful blood flow monitoring for 24 hours. The proposed continuous ultrasound blood flow monitoring is expected to be efficient, thereby enhancing precision, reducing complications, and improving patient outcomes in reconstructive surgery.
- Top Cited PapersOpen Access
- 16 February 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-15
An ultrasensitive and broadband transparent ultrasound transducer for ultrasound and photoacoustic imaging in-vivo
Transparent ultrasound transducers (TUTs) can seamlessly integrate optical and ultrasound components, but acoustic impedance mismatch prohibits existing TUTs from being practical substitutes for conventional opaque ultrasound transducers. Here, we propose a transparent adhesive based on a silicon dioxide-epoxy composite to fabricate matching and backing layers with acoustic impedances of 7.5 and 4–6 MRayl, respectively. By employing these layers, we develop an ultrasensitive, broadband TUT with 63% bandwidth at a single resonance frequency and high optical transparency ( > 80%), comparable to conventional opaque ultrasound transducers. Our TUT maximises both acoustic power and transfer efficiency with maximal spectrum flatness while minimising ringdowns. This enables high contrast and high-definition dual-modal ultrasound and photoacoustic imaging in live animals and humans. Both modalities reach an imaging depth of > 15 mm, with depth-to-resolution ratios exceeding 500 and 370, respectively. This development sets a new standard for TUTs, advancing the possibilities of sensor fusion.
- 16 February 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-15
Top Cited PapersOpen AccessAn ultrasensitive and broadband transparent ultrasound transducer for ultrasound and photoacoustic imaging in-vivo
Transparent ultrasound transducers (TUTs) can seamlessly integrate optical and ultrasound components, but acoustic impedance mismatch prohibits existing TUTs from being practical substitutes for conventional opaque ultrasound transducers. Here, we propose a transparent adhesive based on a silicon dioxide-epoxy composite to fabricate matching and backing layers with acoustic impedances of 7.5 and 4–6 MRayl, respectively. By employing these layers, we develop an ultrasensitive, broadband TUT with 63% bandwidth at a single resonance frequency and high optical transparency ( > 80%), comparable to conventional opaque ultrasound transducers. Our TUT maximises both acoustic power and transfer efficiency with maximal spectrum flatness while minimising ringdowns. This enables high contrast and high-definition dual-modal ultrasound and photoacoustic imaging in live animals and humans. Both modalities reach an imaging depth of > 15 mm, with depth-to-resolution ratios exceeding 500 and 370, respectively. This development sets a new standard for TUTs, advancing the possibilities of sensor fusion.
- 1 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23 (12) , 13000-13009
High-Frequency, Multiband Projector Using 1–3 Connectivity Lithium Niobate Composites With an Inversion Layer
In this study, we demonstrate a sound navigation and ranging (Sonar) projector with a higher and wider frequency range using an inversion layer. Because the working frequency range of the acoustic transducers is limited, several types of the transducers are required to operate at different frequencies for underwater acoustic systems. Multi-band acoustic transducers have been developed to solve this problem; however, the operating frequency range is only 100–200 kHz. To overcome this, we used lithium niobate (LN) to maximize the advantage of using an inversion layer. The characteristics of LN according to the angle of the cutting direction and the characteristics of 1–3 composites were calculated, and finite element method (FEM) simulations were performed using these calculated values. The simulated and measured results of the inversion layer composite and fabricated projectors showed similar electrical impedance responses and transmitting voltage response (TVR). Resonance of the inversion layer composite occurred at 330, 680, and 1100 kHz. The fabricated projector had resonance frequencies of 390 and 790 kHz, and the working frequency range of the fabricated projector was 270–900 kHz. We expect that the developed projector will exhibit excellent performance in underwater navigation applications, such as small-scale object detection and terrain mapping.
- 1 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23 (12) , 13000-13009
High-Frequency, Multiband Projector Using 1–3 Connectivity Lithium Niobate Composites With an Inversion Layer
In this study, we demonstrate a sound navigation and ranging (Sonar) projector with a higher and wider frequency range using an inversion layer. Because the working frequency range of the acoustic transducers is limited, several types of the transducers are required to operate at different frequencies for underwater acoustic systems. Multi-band acoustic transducers have been developed to solve this problem; however, the operating frequency range is only 100–200 kHz. To overcome this, we used lithium niobate (LN) to maximize the advantage of using an inversion layer. The characteristics of LN according to the angle of the cutting direction and the characteristics of 1–3 composites were calculated, and finite element method (FEM) simulations were performed using these calculated values. The simulated and measured results of the inversion layer composite and fabricated projectors showed similar electrical impedance responses and transmitting voltage response (TVR). Resonance of the inversion layer composite occurred at 330, 680, and 1100 kHz. The fabricated projector had resonance frequencies of 390 and 790 kHz, and the working frequency range of the fabricated projector was 270–900 kHz. We expect that the developed projector will exhibit excellent performance in underwater navigation applications, such as small-scale object detection and terrain mapping.
- Open Access
- 20 May 2022
- Published by Elsevier in Photoacoustics
- Vol. 27, 100374
Fully integrated photoacoustic microscopy and photoplethysmography of human in vivo
- 20 May 2022
- Published by Elsevier in Photoacoustics
- Vol. 27, 100374
Open AccessFully integrated photoacoustic microscopy and photoplethysmography of human in vivo
- Top Cited PapersOpen Access
- 12 May 2022
- Published by Springer Nature in Light: Science & Applications
- Vol. 11 (1) , 1-12
Deep learning acceleration of multiscale superresolution localization photoacoustic imaging
A superresolution imaging approach that localizes very small targets, such as red blood cells or droplets of injected photoacoustic dye, has significantly improved spatial resolution in various biological and medical imaging modalities. However, this superior spatial resolution is achieved by sacrificing temporal resolution because many raw image frames, each containing the localization target, must be superimposed to form a sufficiently sampled high-density superresolution image. Here, we demonstrate a computational strategy based on deep neural networks (DNNs) to reconstruct high-density superresolution images from far fewer raw image frames. The localization strategy can be applied for both 3D label-free localization optical-resolution photoacoustic microscopy (OR-PAM) and 2D labeled localization photoacoustic computed tomography (PACT). For the former, the required number of raw volumetric frames is reduced from tens to fewer than ten. For the latter, the required number of raw 2D frames is reduced by 12 fold. Therefore, our proposed method has simultaneously improved temporal (via the DNN) and spatial (via the localization method) resolutions in both label-free microscopy and labeled tomography. Deep-learning powered localization PA imaging can potentially provide a practical tool in preclinical and clinical studies requiring fast temporal and fine spatial resolutions.
- 12 May 2022
- Published by Springer Nature in Light: Science & Applications
- Vol. 11 (1) , 1-12
Top Cited PapersOpen AccessDeep learning acceleration of multiscale superresolution localization photoacoustic imaging
A superresolution imaging approach that localizes very small targets, such as red blood cells or droplets of injected photoacoustic dye, has significantly improved spatial resolution in various biological and medical imaging modalities. However, this superior spatial resolution is achieved by sacrificing temporal resolution because many raw image frames, each containing the localization target, must be superimposed to form a sufficiently sampled high-density superresolution image. Here, we demonstrate a computational strategy based on deep neural networks (DNNs) to reconstruct high-density superresolution images from far fewer raw image frames. The localization strategy can be applied for both 3D label-free localization optical-resolution photoacoustic microscopy (OR-PAM) and 2D labeled localization photoacoustic computed tomography (PACT). For the former, the required number of raw volumetric frames is reduced from tens to fewer than ten. For the latter, the required number of raw 2D frames is reduced by 12 fold. Therefore, our proposed method has simultaneously improved temporal (via the DNN) and spatial (via the localization method) resolutions in both label-free microscopy and labeled tomography. Deep-learning powered localization PA imaging can potentially provide a practical tool in preclinical and clinical studies requiring fast temporal and fine spatial resolutions.
- 2 March 2022
- Published by Springer Nature in Biomedical Engineering Letters
- Vol. 12 (2) , 147-153
Performance comparison of high-speed photoacoustic microscopy: opto-ultrasound combiner versus ring-shaped ultrasound transducer
Photoacoustic microscopy (PAM) embedded with a 532 nm pulse laser is widely used to visualize the microvascular structures in both small animals and humans in vivo. An opto-ultrasound combiner (OUC) is often utilized in high-speed PAM to confocally align the optical and acoustic beams to improve the system's sensitivity. However, acoustic impedance mismatch in the OUC results in little improvement in the sensitivity. Alternatively, a ring-shaped ultrasound transducer (RUT) can also accomplish the confocal configuration. Here, we compare the performance of OUC and RUT modules through ultrasound pulse-echo tests and PA imaging experiments. The signal-to-noise ratios (SNRs) of the RUT-based system were 15 dB, 12 dB, and 7 dB higher when compared to the OUC-based system for ultrasound pulse-echo test, PA phantom imaging test, and PA in-vivo imaging test, respectively. In addition, the RUT-based system could image the microvascular structures of small parts of a mouse body in a few seconds with minimal loss in SNR. Thus, with increased sensitivity, improved image details, and fast image acquisition, we believe the RUT-based systems could play a significant role in the design of future fast-PAM systems.
- 2 March 2022
- Published by Springer Nature in Biomedical Engineering Letters
- Vol. 12 (2) , 147-153
Performance comparison of high-speed photoacoustic microscopy: opto-ultrasound combiner versus ring-shaped ultrasound transducer
Photoacoustic microscopy (PAM) embedded with a 532 nm pulse laser is widely used to visualize the microvascular structures in both small animals and humans in vivo. An opto-ultrasound combiner (OUC) is often utilized in high-speed PAM to confocally align the optical and acoustic beams to improve the system's sensitivity. However, acoustic impedance mismatch in the OUC results in little improvement in the sensitivity. Alternatively, a ring-shaped ultrasound transducer (RUT) can also accomplish the confocal configuration. Here, we compare the performance of OUC and RUT modules through ultrasound pulse-echo tests and PA imaging experiments. The signal-to-noise ratios (SNRs) of the RUT-based system were 15 dB, 12 dB, and 7 dB higher when compared to the OUC-based system for ultrasound pulse-echo test, PA phantom imaging test, and PA in-vivo imaging test, respectively. In addition, the RUT-based system could image the microvascular structures of small parts of a mouse body in a few seconds with minimal loss in SNR. Thus, with increased sensitivity, improved image details, and fast image acquisition, we believe the RUT-based systems could play a significant role in the design of future fast-PAM systems.
- Open Access
Thermal Ablation and High-Resolution Imaging Using a Back-to-Back (BTB) Dual-Mode Ultrasonic Transducer: In Vivo Results
We present a back-to-back (BTB) structured, dual-mode ultrasonic device that incorporates a single-element 5.3 MHz transducer for high-intensity focused ultrasound (HIFU) treatment and a single-element 20.0 MHz transducer for high-resolution ultrasound imaging. Ultrasound image-guided surgical systems have been developed for lesion monitoring to ensure that ultrasonic treatment is correctly administered at the right locations. In this study, we developed a dual-element transducer composed of two elements that share the same housing but work independently with a BTB structure, enabling a mode change between therapy and imaging via 180-degree mechanical rotation. The optic fibers were embedded in the HIFU focal region of ex vivo chicken breasts and the temperature change was measured. Images were obtained in vivo mice before and after treatment and compared to identify the treated region. We successfully acquired B-mode and C-scan images that display the hyperechoic region indicating coagulation necrosis in the HIFU-treated volume up to a depth of 10 mm. The compact BTB dual-mode ultrasonic transducer may be used for subcutaneous thermal ablation and monitoring, minimally invasive surgery, and other clinical applications, all with ultrasound only.
Open AccessThermal Ablation and High-Resolution Imaging Using a Back-to-Back (BTB) Dual-Mode Ultrasonic Transducer: In Vivo Results
We present a back-to-back (BTB) structured, dual-mode ultrasonic device that incorporates a single-element 5.3 MHz transducer for high-intensity focused ultrasound (HIFU) treatment and a single-element 20.0 MHz transducer for high-resolution ultrasound imaging. Ultrasound image-guided surgical systems have been developed for lesion monitoring to ensure that ultrasonic treatment is correctly administered at the right locations. In this study, we developed a dual-element transducer composed of two elements that share the same housing but work independently with a BTB structure, enabling a mode change between therapy and imaging via 180-degree mechanical rotation. The optic fibers were embedded in the HIFU focal region of ex vivo chicken breasts and the temperature change was measured. Images were obtained in vivo mice before and after treatment and compared to identify the treated region. We successfully acquired B-mode and C-scan images that display the hyperechoic region indicating coagulation necrosis in the HIFU-treated volume up to a depth of 10 mm. The compact BTB dual-mode ultrasonic transducer may be used for subcutaneous thermal ablation and monitoring, minimally invasive surgery, and other clinical applications, all with ultrasound only.