Lei Dong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lei Dong has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
Jianqun Yang
School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, P. R. China
6 shared publications- Xiaoqing Yue
School of Materials Science and Engineering, Harbin Institute of Technology, Harbin, China
5 shared publications - Xingji Li
Harbin Institute of Technology
5 shared publications - Lili Zhang
China Electronics Technology Group Corporation 58th Research Institute, Wuxi, People’s Republic of China
2 shared publications Shangli Dong
School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, P. R. China
2 shared publicationsWeiqi Li
School of Physics, Harbin Institute of Technology, Harbin, China
2 shared publications
Latest Publications
- 9 April 2026
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 59 (14) , 145106
Energy- and angle-dependent proton-induced single event upsets in FinFET circuits: impact of layout orientation and charge sharing
The increasing adoption of fin field-effect transistor (FinFET) circuits in space applications necessitates a thorough assessment of their susceptibility to proton-induced single event upsets (SEUs), given the dominance of protons in space radiation environments. While angular effects on heavy-ion-induced SEUs are well-documented, the synergistic energy- and angular-dependence of proton-induced SEUs remains insufficiently explored, particularly regarding layout orientation and charge-sharing dynamics. This work addresses these gaps through variable-angle proton irradiation experiments on advanced FinFET circuits, with underlying mechanisms elucidated via Monte Carlo simulations and a multi-scale Geant4-TCAD-SPICE synergistic framework. Results demonstrate distinct energy-dependent angular behaviors: at low proton energies, SEU cross-sections decrease monotonically with increasing incidence angle due to the Bragg peak shifting beyond the sensitive volume as effective overlayer thickness increases; at high energies, cross-sections initially rise owing to extended path lengths that promote nuclear reactions and secondary particle generation, then decline sharply beyond a critical angle because of reduced effective projected area. At the circuit level, the dense FinFET layout amplifies SEU sensitivity under oblique incidence parallel to fins via enhanced charge sharing among adjacent same-type transistors. In contrast, perpendicular incidence introduces opposing-polarity charge collection in PMOS-NMOS pairs, potentially suppressing upsets, though this effect is limited by large inter-transistor spacing and low charge-sharing probability. These findings identify worst-case proton testing scenarios and guide targeted radiation-hardening strategies: layout optimizations such as increased node separation or interleaving along the fin direction to decouple charge-sharing paths, and deep trench isolation to suppress parasitic bipolar amplification, thereby significantly enhancing the radiation tolerance of next-generation space electronics.
- 9 April 2026
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 59 (14) , 145106
Energy- and angle-dependent proton-induced single event upsets in FinFET circuits: impact of layout orientation and charge sharing
The increasing adoption of fin field-effect transistor (FinFET) circuits in space applications necessitates a thorough assessment of their susceptibility to proton-induced single event upsets (SEUs), given the dominance of protons in space radiation environments. While angular effects on heavy-ion-induced SEUs are well-documented, the synergistic energy- and angular-dependence of proton-induced SEUs remains insufficiently explored, particularly regarding layout orientation and charge-sharing dynamics. This work addresses these gaps through variable-angle proton irradiation experiments on advanced FinFET circuits, with underlying mechanisms elucidated via Monte Carlo simulations and a multi-scale Geant4-TCAD-SPICE synergistic framework. Results demonstrate distinct energy-dependent angular behaviors: at low proton energies, SEU cross-sections decrease monotonically with increasing incidence angle due to the Bragg peak shifting beyond the sensitive volume as effective overlayer thickness increases; at high energies, cross-sections initially rise owing to extended path lengths that promote nuclear reactions and secondary particle generation, then decline sharply beyond a critical angle because of reduced effective projected area. At the circuit level, the dense FinFET layout amplifies SEU sensitivity under oblique incidence parallel to fins via enhanced charge sharing among adjacent same-type transistors. In contrast, perpendicular incidence introduces opposing-polarity charge collection in PMOS-NMOS pairs, potentially suppressing upsets, though this effect is limited by large inter-transistor spacing and low charge-sharing probability. These findings identify worst-case proton testing scenarios and guide targeted radiation-hardening strategies: layout optimizations such as increased node separation or interleaving along the fin direction to decouple charge-sharing paths, and deep trench isolation to suppress parasitic bipolar amplification, thereby significantly enhancing the radiation tolerance of next-generation space electronics.
- Open Access
- 3 June 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (21)
Modeling total ionizing dose effects in fully-depleted silicon-on-insulator technology: Bridging device degradation to radiation-hardened circuit design
While a fully depleted silicon-on-insulator (FDSOI) metal–oxide–semiconductor field-effect transistor (MOSFET) exhibits superior immunity to single event effects through buried oxide layer isolation, its vulnerability to total ionizing dose (TID) effects poses significant reliability challenges in radiation-intensive applications. This work aims to bridge device-level performance degradation mechanisms to circuit-level reliability prediction through modeling TID effects in FDSOI technology. A physics-based TID effects model is developed to quantify the dependence of radiation-induced trapped charge density on cumulative dose and bias condition. The model is then integrated into the industry-standard FDSOI compact model BSIM-IMG through modified surface potential equations, enabling accurate prediction of a TID-induced threshold voltage shift and leakage current elevation. Credibility of the proposed model is verified through comparative analysis with the experimental current–voltage characteristics of devices measured at varying radiation doses. Key radiation-related parameters, including radiation-induced trapped charge density and a mobility degradation parameter, are extracted, enabling predictive simulation of FDSOI ring oscillator circuit performance degradation under ionizing radiation conditions. The feasibility of back-gate biasing to mitigate TID effects in the ring oscillator circuit is demonstrated, underscoring its potential as a circuit-level solution for radiation-hardened designs.
- 3 June 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (21)
Open AccessModeling total ionizing dose effects in fully-depleted silicon-on-insulator technology: Bridging device degradation to radiation-hardened circuit design
While a fully depleted silicon-on-insulator (FDSOI) metal–oxide–semiconductor field-effect transistor (MOSFET) exhibits superior immunity to single event effects through buried oxide layer isolation, its vulnerability to total ionizing dose (TID) effects poses significant reliability challenges in radiation-intensive applications. This work aims to bridge device-level performance degradation mechanisms to circuit-level reliability prediction through modeling TID effects in FDSOI technology. A physics-based TID effects model is developed to quantify the dependence of radiation-induced trapped charge density on cumulative dose and bias condition. The model is then integrated into the industry-standard FDSOI compact model BSIM-IMG through modified surface potential equations, enabling accurate prediction of a TID-induced threshold voltage shift and leakage current elevation. Credibility of the proposed model is verified through comparative analysis with the experimental current–voltage characteristics of devices measured at varying radiation doses. Key radiation-related parameters, including radiation-induced trapped charge density and a mobility degradation parameter, are extracted, enabling predictive simulation of FDSOI ring oscillator circuit performance degradation under ionizing radiation conditions. The feasibility of back-gate biasing to mitigate TID effects in the ring oscillator circuit is demonstrated, underscoring its potential as a circuit-level solution for radiation-hardened designs.
- 5 October 2023
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 6 (20) , 18858-18868
Defect Engineering of MoS2 Nanosheets by Heavy-Ion Irradiation for Hydrogen Evolution
- 5 October 2023
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 6 (20) , 18858-18868
Defect Engineering of MoS2 Nanosheets by Heavy-Ion Irradiation for Hydrogen Evolution
- 14 June 2023
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 47 (25) , 11976-11985
High sensitivity microcrack hydroxylated MWCNT/Ecoflex composite flexible strain sensors based on proton irradiation engineering
In this work, a simple, controllable and mass-produced microcrack technique for stretchable strain sensors is presented. Specifically, the conductive layer (hydroxylated MWCNTs) and the flexible substrate (Ecoflex) of fiber strain flexible sensors are modified based on proton irradiation defect engineering. The evolution of defects in sensitive materials and the density of microcracks in flexible substrates are controlled by controlling the irradiation fluence during the irradiation process. In particular, when the irradiation fluence is 1 × 1014 p cm−2, the gauge factor (GF) of the fiber strain sensor is as high as 1274.8, and the response time and recovery time are reduced by 49.4% and 45.1%, respectively. At the same time, the microcracked structure does not fracture easily under a large strain, the maximum strain being 800%. In addition, fiber strain flexible sensors can also be used to detect biomechanical signals in different scenarios. This simple and efficient microcrack technique opens up a new prospect for the fabrication of high-performance stretchable strain sensors.
- 14 June 2023
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 47 (25) , 11976-11985
High sensitivity microcrack hydroxylated MWCNT/Ecoflex composite flexible strain sensors based on proton irradiation engineering
In this work, a simple, controllable and mass-produced microcrack technique for stretchable strain sensors is presented. Specifically, the conductive layer (hydroxylated MWCNTs) and the flexible substrate (Ecoflex) of fiber strain flexible sensors are modified based on proton irradiation defect engineering. The evolution of defects in sensitive materials and the density of microcracks in flexible substrates are controlled by controlling the irradiation fluence during the irradiation process. In particular, when the irradiation fluence is 1 × 1014 p cm−2, the gauge factor (GF) of the fiber strain sensor is as high as 1274.8, and the response time and recovery time are reduced by 49.4% and 45.1%, respectively. At the same time, the microcracked structure does not fracture easily under a large strain, the maximum strain being 800%. In addition, fiber strain flexible sensors can also be used to detect biomechanical signals in different scenarios. This simple and efficient microcrack technique opens up a new prospect for the fabrication of high-performance stretchable strain sensors.
- 16 March 2023
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 47 (17) , 8214-8222
Effects of 60Co γ-ray irradiation of thin-layer molybdenum disulfide for the hydrogen evolution reaction
A γ-ray irradiation method is expected to achieve the development of efficient, inexpensive, mass-produced, and chemically stable MoS2 catalysts.
- 16 March 2023
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 47 (17) , 8214-8222
Effects of 60Co γ-ray irradiation of thin-layer molybdenum disulfide for the hydrogen evolution reaction
A γ-ray irradiation method is expected to achieve the development of efficient, inexpensive, mass-produced, and chemically stable MoS2 catalysts.
- 12 December 2022
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 132 (22) , 225107
Effect of fluorine ion irradiation on the properties of monolayer molybdenum disulfide
Two-dimensional molybdenum disulfide (2D MoS2) has great application prospects in the field of optoelectronic devices. Defect engineering is an effective way to regulate the electronic and optical properties of 2D MoS2. However, defect controlling on 2D materials remains a major challenge. Fluorine, as the most electronegative element, may cause many interesting phenomena after doping in 2D materials. So far, there have been no reports on the effect of fluoride ion (F− ion) irradiation on 2D material properties. In this paper, the monolayer MoS2 (ML-MoS2) synthesized by the chemical vapor deposition method was taken as the research object, and defects with controllable densities were produced by 30 keV F− ion irradiation, in which the defects were dominated by S vacancies. Based on Raman, photoluminescence, and x-ray photoelectron spectroscopy, it is shown that the ion irradiation-induced defects significantly affect the optoelectronic properties of MoS2. We also observed the p-doping of ML-MoS2, which is attributed to the introduction of F− ions and the electron transfer from MoS2 to O2 at defect adsorption sites. This study reveals that 2D materials could be effectively doped or compensated using irradiation technology, potentially fabricating novel 2D electrical devices through defect engineering.
- 12 December 2022
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 132 (22) , 225107
Effect of fluorine ion irradiation on the properties of monolayer molybdenum disulfide
Two-dimensional molybdenum disulfide (2D MoS2) has great application prospects in the field of optoelectronic devices. Defect engineering is an effective way to regulate the electronic and optical properties of 2D MoS2. However, defect controlling on 2D materials remains a major challenge. Fluorine, as the most electronegative element, may cause many interesting phenomena after doping in 2D materials. So far, there have been no reports on the effect of fluoride ion (F− ion) irradiation on 2D material properties. In this paper, the monolayer MoS2 (ML-MoS2) synthesized by the chemical vapor deposition method was taken as the research object, and defects with controllable densities were produced by 30 keV F− ion irradiation, in which the defects were dominated by S vacancies. Based on Raman, photoluminescence, and x-ray photoelectron spectroscopy, it is shown that the ion irradiation-induced defects significantly affect the optoelectronic properties of MoS2. We also observed the p-doping of ML-MoS2, which is attributed to the introduction of F− ions and the electron transfer from MoS2 to O2 at defect adsorption sites. This study reveals that 2D materials could be effectively doped or compensated using irradiation technology, potentially fabricating novel 2D electrical devices through defect engineering.
- 12 July 2022
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 10 (30) , 10805-10814
Improving the comprehensive performance of strain flexible sensors by electron irradiation and temperature synergy
With the continuous development of science and technology, people have an urgent demand for wearable flexible sensors. Therefore, how to obtain high performance wearable sensors at low cost has become an urgent problem to be solved. In this work, a method for surface modification of sensors based on electron irradiation is proposed. Hydroxylated multi-walled carbon nanotube (hydroxylated MWCNT)/ecoflex composite flexible sensors were irradiated under the synergistic effect of 1 MeV electron irradiation and temperature to improve their performance. It is found that under the synergistic effect of low temperature, more defects and active functional groups were introduced into the irradiated sensor, and thus its sensitivity was higher. At the maximum strain, the gauge factor (GF) of the irradiated sensor was 3.7 times that of the original. And when the irradiation fluence was 1 × 1014 e cm−2, the response time and recovery time of the sensor were reduced by 57.1% and 75.0%, respectively. This synergistic modification method of electron irradiation and low temperature provides a new idea for obtaining wearable sensors with high performance.
- 12 July 2022
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 10 (30) , 10805-10814
Improving the comprehensive performance of strain flexible sensors by electron irradiation and temperature synergy
With the continuous development of science and technology, people have an urgent demand for wearable flexible sensors. Therefore, how to obtain high performance wearable sensors at low cost has become an urgent problem to be solved. In this work, a method for surface modification of sensors based on electron irradiation is proposed. Hydroxylated multi-walled carbon nanotube (hydroxylated MWCNT)/ecoflex composite flexible sensors were irradiated under the synergistic effect of 1 MeV electron irradiation and temperature to improve their performance. It is found that under the synergistic effect of low temperature, more defects and active functional groups were introduced into the irradiated sensor, and thus its sensitivity was higher. At the maximum strain, the gauge factor (GF) of the irradiated sensor was 3.7 times that of the original. And when the irradiation fluence was 1 × 1014 e cm−2, the response time and recovery time of the sensor were reduced by 57.1% and 75.0%, respectively. This synergistic modification method of electron irradiation and low temperature provides a new idea for obtaining wearable sensors with high performance.
- 26 April 2022
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 10 (20) , 7839-7848
The effects of the fluence of electron irradiation on the structure and hydrogen evolution reaction performance of molybdenum disulfide
Controllable and stable 1T phase MoS2 nanosheets were obtained by 1 MeV electron irradiation, and the hydrogen evolution reaction performance was improved.
- 26 April 2022
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 10 (20) , 7839-7848
The effects of the fluence of electron irradiation on the structure and hydrogen evolution reaction performance of molybdenum disulfide
Controllable and stable 1T phase MoS2 nanosheets were obtained by 1 MeV electron irradiation, and the hydrogen evolution reaction performance was improved.