Alexandr A. Filyaev has a total of 47 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Investigation of the Effects of the Multiplication Area Shape on the Operational Parameters of InGaAs/InAlAs SPADs

    by Anton Losev, Alexandr Filyaev, Vladimir Zavodilenko, Fedor Knyazhev, Igor Pavlov, Alexander Gorbatsevich

    A 2D model of an InGaAs/InAlAs single-photon avalanche photodiode has been developed. The influence of the active area structure in the multiplication region on the diode’s operating parameters has been studied. It was found that changing the diameter of the structure’s active region leads to a change in the dark current in the linear part of the current–voltage curve and a change in the breakdown voltage. Reducing the diameter of the active region from 25 μm to 10 μm allowed decreasing the dark current in the linear mode by about 10 dB. It has been shown that the quality of the SPAD device can be assessed by knowing the avalanche breakdown voltage and the overall current–voltage curve plot if we consider structures with the same multiplication region thickness and different remaining layers. The higher the breakdown voltage, the better the structure’s quality due to smaller local increases in the field strength. Following this statement, we conclude that for further use in single-photon detectors, it is reasonable to pick specific SPADs from a batch on the sole basis of their current–voltage curves.

  • Development of an afterpulse effect model of InGaAs/InP single-photon avalanche diodes for application in quantum key distribution systems

    by Alexandr Filyaev, Anton Losev, Vladimir Zavodilenko, Igor Pavlov

    Subject of study. A noise parameter, such as an afterpulse effect, that occurs in indium-gallium arsenide/indium phosphide single-photon avalanche diodes when operated as part of a single-photon detector in quantum key distribution systems was investigated. The aim of this study was the analysis of indium-gallium arsenide/indium phosphide single-photon avalanche diode afterpulse effect estimation approaches for real-world quantum key distribution systems and the development of a measurement technique and model for estimating the afterpulse effect in indium-gallium arsenide/indium phosphide single-photon avalanche diodes. Method. For the experimental measurement of the afterpulse probability in indium-gallium arsenide/indium phosphide single-photon avalanche diodes, a special stand was used. All components of this stand are controlled by LabVIEW software. The developed model of afterpulse probability is based on the non-Markovian character of this effect. Main results. A measurement technique and probabilistic model were developed to estimate the afterpulse based on the recursive nature of this effect in indium-gallium arsenide/indium phosphide single-photon avalanche diodes. This makes it possible to estimate the true value of the afterpulse probability by reaction with a single triggering of a single-photon detector composed of indium-gallium arsenide/indium phosphide single-photon avalanche diodes. Analysis of approaches to estimating the afterpulse used in real-world quantum key distribution systems was performed. The advantages of the developed approach over the standard methods that do not take into account the non-Markov nature of the effect under consideration are demonstrated. Practical significance. The proposed approach was developed in the form of two models (simple and complex), which allows a compromise between the accuracy of calculations and their complexity for the application of such devices in quantum key distribution systems.

  • Open Access

    The avalanche delay effect in sine-gated single-photon detector based on InGaAs/InP SPADs

    by Alexandr Filyaev, Anton Losev, Vladimir Zavodilenko, Igor Pavlov

    A sine-gated single-photon detector (SPD) intended for use in a quantum key distribution (QKD) system is considered in this paper. An "avalanche delay" effect in the sine-gated SPD is revealed. This effect consists in the appearance of an avalanche triggered at the next gate after the photon arrival gate. It has been determined experimentally that the nature of this effect is not related to the known effects of afterpulsing or charge persistence. This effect negatively affects the overall error rate in the QKD system. The influence of the main detector control parameters, such as temperature, gate amplitude and comparator's threshold voltage, on the avalanche delay effect was experimentally established.

  • Open Access

    Investigation of the Effects of the Multiplication Area Shape on the Operational Parameters of InGaAs/InAlAs SPADs

    by Anton Losev, Alexandr Filyaev, Vladimir Zavodilenko, Igor Pavlov, Alexander Gorbatsevich

    A 2D model of an InGaAs/InAlAs single photon avalanche photodiode has been developed. The influence of the active area structure in the multiplication region on the diode's operating parameters has been studied. It was found that changing the diameter of the structure's active region leads to a change in the dark current in the linear part of the current-voltage curve and a change in the breakdown voltage. Reducing the diameter of the active region from 25 $μ$m to 10 $μ$m allowed decreasing the dark current in the linear mode by about $10$ dB. It has been shown that the quality of the SPAD device can be assessed by knowing the avalanche breakdown voltage and the overall current-voltage curve plot if we consider structures with the same multiplication region thickness and different remaining layers. The higher the breakdown voltage, the better the structure's quality due to smaller local increases in the field strength. Following this statement, we conclude that for further use in single-photon detectors, it is reasonable to pick specific SPADs from a batch on the sole basis of their current-voltage curves.

  • Сравнение отечественных детекторов одиночных фотонов от QRate c аналогами от ID Quantique

    by С.н. Мосенцов, А.в. Лосев, В.в. Заводиленко, А.а. Филяев, И.д. Павлов, Н.в. Буров

    Статья посвящена сравнению характеристик детекторов одиночных фотонов производителей QRate (Россия) и ID Quantique (Швейцария). В работе исследованы их квантовые эффективности, частоты темнового счета и вероятности послеимпульсов. Результаты тестирования показали взаимозаменяемость детекторов, несоответствие зарубежных детекторов заявленным характеристикам и продемонстрировали потенциал отечественной разработки.


  • Evaluation of the Operational Parameters of Single-Photon Detectors in Quantum Key Distribution Devices

    by V. V. Zavodilenko, A. V. Losev, A. A. Filyaev, I. D. Pavlov

    Automated measuring stand (AMS) for evaluation of the operational parameters of single-photon detectors (SPD) has been developed together with the software

  • Transparent Radio-Shielding Materials Based on Multilayer and Mesh Structures

    by M. O. Makeev, A. S. Osipkov, A. A. Filyaev, K. P. Sinyagaeva, E. I. Garsiya, D. S. Ryzhenko, G. Yu. Yurkov

    Methods for fabrication of materials that simultaneously exhibit high transparency in the visible spectral range and radio shielding in a wide frequency band are considered. The main structures of such materials (multilayer coatings and mesh structures) are analyzed and compared, and several technological procedures are considered. It is shown that optimization of the thickness and chemical composition of multilayer coatings and geometrical parameters of mesh structures can significantly improve their properties. Promising structures are proposed to obtain an optical transmission coefficient of 90–98% and a radio shielding coefficient of 50–65 dB.


  • A Neural Network Model for Simulation the Electrical Characteristics of Heterostructural Nanodevices Accounting the Technology Process Instabilities

    by Natalia Vetrova, Alexandr Filyaev, Kirill Pchelintsev

    This paper is devoted to the development of an artificial neural network for solving the problem of predicting the electrical parameters of semiconductor heterostructural nanodevices. The advantage of the neural network approach is a significant reduction in time complexity of the computational algorithm (several orders of magnitude increase in model performance). Also, in the case of using experimentally derived nanodevices electrical parameters for training, it is possible to take into account the combined effect of technological errors occurring during their manufacture. Authors’ algorithm of neural network model construction is presented, including determination of effective values of neural network hyperparameters, as well as proposed solution to the problem of training sample formation under conditions of limited experimental data for accounting manufacturing technological errors of semiconductor heterostructure nanodevices.

  • Prediction of Safety Indicators for Donor Blood and Its Components in a Statistically Managed Technological Process Based on Bayesian Inversion

    by N. A. Vetrova, V. N. Lemondzhava, A. A. Filyaev, A. G. Gudkov, V. D. Shashurin, V. Yu. Leushin, S. V. Sidorkevich, A. D. Kas’yanov, E. N. Gorlacheva, L. A. Luneva