Di Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Di Liu has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Yunsheng Fan
College of Marine Electrical Engineering, Dalian Maritime University, Dalian, China
9 shared publications - Guofeng Wang
College of Marine Electrical Engineering, Dalian Maritime University, Dalian, China
8 shared publications - Jian Liu
College of Marine Electrical Engineering, Dalian Maritime University, Dalian, China
8 shared publications - Linhao Sheng
College of Marine Electrical Engineering, Dalian Maritime University, Dalian, China
5 shared publications - Dongdong Mu
Dalian Maritime University
2 shared publications Guofeng Wang
2 shared publications
Latest Publications
- 24 May 2025
- Published by Springer Nature in Electrical Engineering
- Vol. 107 (8) , 11143-11158
Enhanced deadbeat predictive current control for unipolar sinusoidal excited SRMs with periodic disturbances rejection
- 24 May 2025
- Published by Springer Nature in Electrical Engineering
- Vol. 107 (8) , 11143-11158
Enhanced deadbeat predictive current control for unipolar sinusoidal excited SRMs with periodic disturbances rejection
- 22 May 2025
- Published by Elsevier in Measurement
- Vol. 254
A novel method for accurate modeling of a switched reluctance motor with low measurement effort
- 22 May 2025
- Published by Elsevier in Measurement
- Vol. 254
A novel method for accurate modeling of a switched reluctance motor with low measurement effort
- 30 August 2024
- Published by Springer Nature in Journal of Electrical Engineering & Technology
- Vol. 20 (1) , 621-634
Cascaded Deadbeat Predictive Control for the Unipolar Sinusoidal Excited SRMs Based on the Adaptive Fading Kalman Filter
- 30 August 2024
- Published by Springer Nature in Journal of Electrical Engineering & Technology
- Vol. 20 (1) , 621-634
Cascaded Deadbeat Predictive Control for the Unipolar Sinusoidal Excited SRMs Based on the Adaptive Fading Kalman Filter
- 14 April 2024
- Published by Springer Nature in Journal of Electrical Engineering & Technology
- Vol. 19 (8) , 4953-4968
Deadbeat Indirect Torque Control of Switched Reluctance Motors with Current Vector Decomposition
- 14 April 2024
- Published by Springer Nature in Journal of Electrical Engineering & Technology
- Vol. 19 (8) , 4953-4968
Deadbeat Indirect Torque Control of Switched Reluctance Motors with Current Vector Decomposition
- 26 March 2024
- Published by Springer Nature in Journal of Electrical Engineering & Technology
- Vol. 19 (7) , 4267-4283
An Improved Model Predictive Torque Control for Switched Reluctance Motor Drive Based on Candidate Switching Vectors Preprocessing
- 26 March 2024
- Published by Springer Nature in Journal of Electrical Engineering & Technology
- Vol. 19 (7) , 4267-4283
An Improved Model Predictive Torque Control for Switched Reluctance Motor Drive Based on Candidate Switching Vectors Preprocessing
- 8 January 2024
- Published by Springer Nature in Journal of Electrical Engineering & Technology
- Vol. 19 (4) , 2295-2309
A Novel Torque Ripple Suppression Scheme of Switched Reluctance Motors Based on Unipolar Sinusoidal Current Excitation
- 8 January 2024
- Published by Springer Nature in Journal of Electrical Engineering & Technology
- Vol. 19 (4) , 2295-2309
A Novel Torque Ripple Suppression Scheme of Switched Reluctance Motors Based on Unipolar Sinusoidal Current Excitation
- Open Access
- 24 April 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (9) , 5319
An Improved Direct Predictive Torque Control for Torque Ripple and Copper Loss Reduction in SRM Drive
This paper introduces a direct predictive torque control (DPTC) method to minimize the torque ripple and copper loss of the switched reluctance motor (SRM). Generally, there is a problem with torque ripple during the SRM’s commutation. In this method, the commutation optimization is provided by a direct predictive torque control algorithm. Firstly, the reachable range of phase torques is predicted and the boundary of two continuous phases is modified. By dividing the torque range directly to determine the torque allocation set, the suppression of torque ripple becomes simple. Secondly, considering the optimization problem of copper loss during commutation, a cost function only related to the phase current is constructed. Further, the minimization of copper loss can be achieved by solving the cost function, and the work of setting weight parameters is not required. Finally, the proposed DPTC method is tested by simulation and experiment in a three-phase 12/8-pole SRM drive system and the results are compared with the existing predictive torque control methods. The results show that the proposed method has less torque ripple and copper loss, which effectively improves the torque control performance.
- 24 April 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (9) , 5319
Open AccessAn Improved Direct Predictive Torque Control for Torque Ripple and Copper Loss Reduction in SRM Drive
This paper introduces a direct predictive torque control (DPTC) method to minimize the torque ripple and copper loss of the switched reluctance motor (SRM). Generally, there is a problem with torque ripple during the SRM’s commutation. In this method, the commutation optimization is provided by a direct predictive torque control algorithm. Firstly, the reachable range of phase torques is predicted and the boundary of two continuous phases is modified. By dividing the torque range directly to determine the torque allocation set, the suppression of torque ripple becomes simple. Secondly, considering the optimization problem of copper loss during commutation, a cost function only related to the phase current is constructed. Further, the minimization of copper loss can be achieved by solving the cost function, and the work of setting weight parameters is not required. Finally, the proposed DPTC method is tested by simulation and experiment in a three-phase 12/8-pole SRM drive system and the results are compared with the existing predictive torque control methods. The results show that the proposed method has less torque ripple and copper loss, which effectively improves the torque control performance.
- 16 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 11 (2) , 1589-1603
An Improved Deadbeat Control Scheme for Unipolar Sinusoidal Current Excited Switched Reluctance Motor Drives
This article reports on a novel deadbeat control (DBC) scheme to improve the current regulation performance of the unipolar sinusoidal excited control strategy for switched reluctance motors (SRMs). In this scheme, the deadbeat controller with delay compensation is first designed by using a second-order inductance-based SRM model in the rotating reference frame. This developed model can provide a more accurate description of the torque and electromagnet characteristics compared with the existing model. However, ignoring the magnetic saturation during the modeling inevitably leads to uncertainties in the proposed DBC system. To further estimate the disturbance caused by these uncertainties and improve robustness, a simple adaptive disturbance observer (ADO) based on the steepest descent method is embedded in the deadbeat controller. Then, a stability analysis based on the discrete-time Lyapunov function is used to guarantee convergence and tune the adaption gain of the proposed ADO. Finally, comparative experiments under different operation conditions are carried out on a three-phase 12/8 SRM prototype to verify the effectiveness of the proposed scheme.
- 16 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 11 (2) , 1589-1603
An Improved Deadbeat Control Scheme for Unipolar Sinusoidal Current Excited Switched Reluctance Motor Drives
This article reports on a novel deadbeat control (DBC) scheme to improve the current regulation performance of the unipolar sinusoidal excited control strategy for switched reluctance motors (SRMs). In this scheme, the deadbeat controller with delay compensation is first designed by using a second-order inductance-based SRM model in the rotating reference frame. This developed model can provide a more accurate description of the torque and electromagnet characteristics compared with the existing model. However, ignoring the magnetic saturation during the modeling inevitably leads to uncertainties in the proposed DBC system. To further estimate the disturbance caused by these uncertainties and improve robustness, a simple adaptive disturbance observer (ADO) based on the steepest descent method is embedded in the deadbeat controller. Then, a stability analysis based on the discrete-time Lyapunov function is used to guarantee convergence and tune the adaption gain of the proposed ADO. Finally, comparative experiments under different operation conditions are carried out on a three-phase 12/8 SRM prototype to verify the effectiveness of the proposed scheme.
- Open Access
- 26 May 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (11) , 5407
An Improved Vector Control Strategy for Switched Reluctance Motor Drive Based on the Two-Degree-of-Freedom Internal Model Control
The unipolar sinusoidal current excited control strategy of the switched reluctance motor (SRM) has been widely attended for its wide driving area and acceptable torque ripple. However, due to the SRM’s time-varying, non-linear, and high coupling features, the traditional vector control strategies are unable to provide excellent current control performance. In this paper, a novel vector control method based on a two-degree-of-freedom internal model control (2DOF IMC) is proposed. The main objectives of this article are to improve the control precision and to enhance the system’s robustness. Firstly, considering the non-linear characteristics of the system in the rotating reference frame, a 2DOF IMC controller based on a simplified SRM model is designed and the stability analysis of the controller is implemented. Since the time-varying disturbance cannot be effectively eliminated using the 2DOF IMC with constant filter parameters, a simple adaptive disturbance observer (ADO) is incorporated into the inner-loop system to online estimate and eliminate these disturbances. Moreover, a stability analysis based on Lyapunov theory is also presented, and the ADO’s stability and convergence are guaranteed by tuning the adaption gain law. Finally, the effectiveness of the proposed control strategy is demonstrated by experiments, and the results illustrate that the proposed method can effectively improve the control and disturbance rejection performance of the SRM drives.
- 26 May 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (11) , 5407
Open AccessAn Improved Vector Control Strategy for Switched Reluctance Motor Drive Based on the Two-Degree-of-Freedom Internal Model Control
The unipolar sinusoidal current excited control strategy of the switched reluctance motor (SRM) has been widely attended for its wide driving area and acceptable torque ripple. However, due to the SRM’s time-varying, non-linear, and high coupling features, the traditional vector control strategies are unable to provide excellent current control performance. In this paper, a novel vector control method based on a two-degree-of-freedom internal model control (2DOF IMC) is proposed. The main objectives of this article are to improve the control precision and to enhance the system’s robustness. Firstly, considering the non-linear characteristics of the system in the rotating reference frame, a 2DOF IMC controller based on a simplified SRM model is designed and the stability analysis of the controller is implemented. Since the time-varying disturbance cannot be effectively eliminated using the 2DOF IMC with constant filter parameters, a simple adaptive disturbance observer (ADO) is incorporated into the inner-loop system to online estimate and eliminate these disturbances. Moreover, a stability analysis based on Lyapunov theory is also presented, and the ADO’s stability and convergence are guaranteed by tuning the adaption gain law. Finally, the effectiveness of the proposed control strategy is demonstrated by experiments, and the results illustrate that the proposed method can effectively improve the control and disturbance rejection performance of the SRM drives.
- 10 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 57 (11) , 1-11
A Novel Method to Obtain the Flux-Linkage Characteristics of Switched Reluctance Motors
Measuring and quantifying the electromagnetic characteristics of switched reluctance motors (SRMs) are indispensable for advanced motor control and performance enhancement. This article reports on a novel method in obtaining the flux-linkage characteristics of an SRM without rotor clamping devices and position sensors. This approach combines measurement with data reconstruction. For the measuring step, flux-linkage samples at four torque-balanced positions were measured indirectly. Considering the magnetic coupling among phases, two different excitation forms were adopted to further increase accuracy. Then, for the reconstructing step, a fuzzy logic-based approach was applied to reconstruct the complete flux-linkage characteristics with measurement results. The construction results were compared to measurements results from the traditional rotor clamping method, and good agreements can be found, demonstrating the effectiveness of the proposed method. Furthermore, based on reconstructed electromagnetic characteristics, dynamic simulation of an SRM prototype under different control modes was carried out and analyzed in MATLAB. Comparison with dynamic experiments further verifies the accuracy and effectiveness of the proposed method.
- 10 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 57 (11) , 1-11
A Novel Method to Obtain the Flux-Linkage Characteristics of Switched Reluctance Motors
Measuring and quantifying the electromagnetic characteristics of switched reluctance motors (SRMs) are indispensable for advanced motor control and performance enhancement. This article reports on a novel method in obtaining the flux-linkage characteristics of an SRM without rotor clamping devices and position sensors. This approach combines measurement with data reconstruction. For the measuring step, flux-linkage samples at four torque-balanced positions were measured indirectly. Considering the magnetic coupling among phases, two different excitation forms were adopted to further increase accuracy. Then, for the reconstructing step, a fuzzy logic-based approach was applied to reconstruct the complete flux-linkage characteristics with measurement results. The construction results were compared to measurements results from the traditional rotor clamping method, and good agreements can be found, demonstrating the effectiveness of the proposed method. Furthermore, based on reconstructed electromagnetic characteristics, dynamic simulation of an SRM prototype under different control modes was carried out and analyzed in MATLAB. Comparison with dynamic experiments further verifies the accuracy and effectiveness of the proposed method.