Dayaram N. Sonawane
Research Subjects
Dayaram N. Sonawane has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Deepak Ingole
Department of Mechanical Engineering, KU Leuven, Leuven, Belgium
2 shared publications Abhinav Gunjal
College of Engineering, Pune, India
1 shared publication- Chaitanya Jugade
Eindhoven University of Technology, Eindhoven, The Netherlands
1 shared publication - Chetankumar Patil
College of Engineering
1 shared publication John Gustafson
School of Computing, National University of Singapore, Singapore
1 shared publicationKalyani Bhole
College of Engineering Pune
1 shared publication
Latest Publications
- 12 March 2023
- Published by Springer Nature
- p. 287-302
Design and Simulation of Capacitive Pressure Sensor for Monitoring Lead-Acid Battery Charge
- 12 March 2023
- Published by Springer Nature
- p. 287-302
Design and Simulation of Capacitive Pressure Sensor for Monitoring Lead-Acid Battery Charge
- Open Access
- 7 August 2022
- Published by Engineering, Technology & Applied Science Research in Engineering, Technology & Applied Science Research
- Vol. 12 (4) , 8901-8909
Performance Assessment of the BLDC Motor in EV Drives using Nonlinear Model Predictive Control
In this paper, the Nonlinear Model Predictive Control (NMPC) technique is proposed for the control of BrushLess Direct Current (BLDC) motors to address the problem of over-excitation, specifically in Electric Vehicle (EV) applications. This over-excitation increases the overall energy consumption of the machine and eventually reduces the vehicle’s driving range. The developed NMPC incorporates a nonlinear model of the BLDC motor with EV load and obtains the optimal current through the optimal voltage applied to the machine to regulate the motor torque. The proposed NMPC is compared with three conventional control techniques, the Field-Oriented Control (FOC), the Direct Torque Control (DTC), and the hybrid (the combination of DTC and FOC) control. It is observed from the simulation results that the proposed NMPC controller is more energy efficient while maintaining performance. This paper also discusses the selection of the motor based on the specified vehicle requirements. This has been done by matching the vehicle speed-torque characteristic curve with the motor’s one.
- 7 August 2022
- Published by Engineering, Technology & Applied Science Research in Engineering, Technology & Applied Science Research
- Vol. 12 (4) , 8901-8909
Open AccessPerformance Assessment of the BLDC Motor in EV Drives using Nonlinear Model Predictive Control
In this paper, the Nonlinear Model Predictive Control (NMPC) technique is proposed for the control of BrushLess Direct Current (BLDC) motors to address the problem of over-excitation, specifically in Electric Vehicle (EV) applications. This over-excitation increases the overall energy consumption of the machine and eventually reduces the vehicle’s driving range. The developed NMPC incorporates a nonlinear model of the BLDC motor with EV load and obtains the optimal current through the optimal voltage applied to the machine to regulate the motor torque. The proposed NMPC is compared with three conventional control techniques, the Field-Oriented Control (FOC), the Direct Torque Control (DTC), and the hybrid (the combination of DTC and FOC) control. It is observed from the simulation results that the proposed NMPC controller is more energy efficient while maintaining performance. This paper also discusses the selection of the motor based on the specified vehicle requirements. This has been done by matching the vehicle speed-torque characteristic curve with the motor’s one.
- 12 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 30 (6) , 2646-2657
A Memory Efficient FPGA Implementation of Offset-Free Explicit Model Predictive Controller
In the explicit model predictive control (EMPC), memory increases exponentially with the number of states, inputs, constraints, and prediction horizons; this often limits its applicability to large systems. In this article, we present a novel memory reduction technique for the lightweight EMPC using a novel posit number format implemented on a field-programmable gate array (FPGA), aiming to reduce the memory footprints and power utilization of the EMPC. We developed a fully automatic framework for the design of fast embedded EMPC on FPGAs using posit arithmetic and logical unit (ALU). The proposed technique is based on encoding all data (i.e., the critical regions and the feedback laws) as posit numbers, which can be viewed as a more memory-efficient alternative to the IEEE 754 floating-point standard. The performance and efficiency of the developed posit-based offset-free EMPC are demonstrated on the anesthesia control problem. We show the results of hardware-in-the-loop co-simulation with the detailed analysis of the resource utilization, power utilization, clock achieved, and the memory footprints comparison between IEEE 754 floating-point and posit formats. By doing so, we illustrate that the total memory footprints can be reduced by 50%–75% with achieving low power utilization as compared to floating-point numbers without sacrificing the control performances. The proposed technique can be applied on top of other existing complexity reduction techniques used in EMPC as well as for the online optimization methods.
- 12 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 30 (6) , 2646-2657
A Memory Efficient FPGA Implementation of Offset-Free Explicit Model Predictive Controller
In the explicit model predictive control (EMPC), memory increases exponentially with the number of states, inputs, constraints, and prediction horizons; this often limits its applicability to large systems. In this article, we present a novel memory reduction technique for the lightweight EMPC using a novel posit number format implemented on a field-programmable gate array (FPGA), aiming to reduce the memory footprints and power utilization of the EMPC. We developed a fully automatic framework for the design of fast embedded EMPC on FPGAs using posit arithmetic and logical unit (ALU). The proposed technique is based on encoding all data (i.e., the critical regions and the feedback laws) as posit numbers, which can be viewed as a more memory-efficient alternative to the IEEE 754 floating-point standard. The performance and efficiency of the developed posit-based offset-free EMPC are demonstrated on the anesthesia control problem. We show the results of hardware-in-the-loop co-simulation with the detailed analysis of the resource utilization, power utilization, clock achieved, and the memory footprints comparison between IEEE 754 floating-point and posit formats. By doing so, we illustrate that the total memory footprints can be reduced by 50%–75% with achieving low power utilization as compared to floating-point numbers without sacrificing the control performances. The proposed technique can be applied on top of other existing complexity reduction techniques used in EMPC as well as for the online optimization methods.
- 1 January 2020
- Published by Elsevier in IFAC-PapersOnLine
- Vol. 53 (2) , 7020-7025
FPGA Implementation Framework for Low Latency Nonlinear Model Predictive Control
- 1 January 2020
- Published by Elsevier in IFAC-PapersOnLine
- Vol. 53 (2) , 7020-7025
FPGA Implementation Framework for Low Latency Nonlinear Model Predictive Control
- 2 January 2019
- Published by Springer Nature
- p. 255-263
Design and Development of Scalable IoT Framework for Healthcare Application
- 2 January 2019
- Published by Springer Nature
- p. 255-263
Design and Development of Scalable IoT Framework for Healthcare Application
- 1 April 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 211-215
Time Based Intensity Control for Energy Optimization Used for Street Lighting
In this paper we have designed a simple, robust and energy efficient street light control system which requires minimum maintenance. The principle used is sensing time for deciding the intensity of the street light. The astronomical clock depending on geographical area is studied to generate statistical data. The intensity is varied in five steps as per the variations in ambient natural light obtained from the statistical data. The system uses micro controller, real time clock and MOSFET based driver circuit for controlling intensity of an LED array. Energy saving is 15.96 KWhr per street light per year in comparison with simple on-off systems. The system is more reliable than sensor based systems and requires less maintenance as compared to wireless sensor networks.
- 1 April 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 211-215
Time Based Intensity Control for Energy Optimization Used for Street Lighting
In this paper we have designed a simple, robust and energy efficient street light control system which requires minimum maintenance. The principle used is sensing time for deciding the intensity of the street light. The astronomical clock depending on geographical area is studied to generate statistical data. The intensity is varied in five steps as per the variations in ambient natural light obtained from the statistical data. The system uses micro controller, real time clock and MOSFET based driver circuit for controlling intensity of an LED array. Energy saving is 15.96 KWhr per street light per year in comparison with simple on-off systems. The system is more reliable than sensor based systems and requires less maintenance as compared to wireless sensor networks.
- 1 April 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2, 335-338
GNU/Linux shell access through a web-browser for an embedded Linux e-learning system
The internet has grown rapidly and has a more impact on the education sector than it had before. This paper aims at describing a novel way of extending the e-Learning techniques used to the area of embedded Linux education. For these techniques, Open Source Software (OSS) technologies [viz. AJAX, PHP, Apache] have been used in an innovative way to impart embedded Linux education just by use of normal web-browsers which make the learning system as easy as checking a mail. In this paper, ways of enabling the embedded device's Linux shell access through a web-browser is explained, which is a key feature of the system. The novelty in the idea lies in its scalability and accessibility for multiple users.
- 1 April 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2, 335-338
GNU/Linux shell access through a web-browser for an embedded Linux e-learning system
The internet has grown rapidly and has a more impact on the education sector than it had before. This paper aims at describing a novel way of extending the e-Learning techniques used to the area of embedded Linux education. For these techniques, Open Source Software (OSS) technologies [viz. AJAX, PHP, Apache] have been used in an innovative way to impart embedded Linux education just by use of normal web-browsers which make the learning system as easy as checking a mail. In this paper, ways of enabling the embedded device's Linux shell access through a web-browser is explained, which is a key feature of the system. The novelty in the idea lies in its scalability and accessibility for multiple users.