Manopriya Samtham
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Manopriya Samtham has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Rupesh S. Devan
Indian Institute of Technology Indore
5 shared publications - Ekta Choudhary
Department of Metallurgical Engineering and Materials Science Indian Institute of Technology Indore Khandwa Road, Simrol Indore 453552 India
4 shared publications - Santosh Bimli
Department of Chemistry University of Ulsan Ulsan Republic of Korea
3 shared publications Ajay Patil
Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology Indore, Khandwa Road, Simrol, 453552, India
2 shared publications- Boubker Fares
STCE-Energy Research Centre (ERC) Faculty of Science Mohammed V University in Rabat Rabat B. P. 1014 Morocco
2 shared publications Diwakar Singh
2 shared publications
Latest Publications
- 4 February 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (21) , 12699-12712
Unleashing potential of novel 2D-Bi 2 S 3 /1D-SnO 2 heterostructure thin film anodes for light-fostered asymmetric electrochromic supercapacitors
A 2D Bi 2 S 3 decorated 1D SnO 2 , n–n type heterostructure integrated with PEDOT:PSS exhibits photo-assisted supercapacitor and electrochromic behaviour, enabling efficient solar energy conversion, storage, and multifunctional device applications.
- 4 February 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (21) , 12699-12712
Unleashing potential of novel 2D-Bi 2 S 3 /1D-SnO 2 heterostructure thin film anodes for light-fostered asymmetric electrochromic supercapacitors
A 2D Bi 2 S 3 decorated 1D SnO 2 , n–n type heterostructure integrated with PEDOT:PSS exhibits photo-assisted supercapacitor and electrochromic behaviour, enabling efficient solar energy conversion, storage, and multifunctional device applications.
- 2 December 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (7) , 4024-4035
Cationic defect-engineered CuMn 2 O 4 photothermal membranes to leverage interfacial solar steam generation
Defect-rich CMO NF membrane deliver broadband light absorption, enhanced hydrophilicity, and efficient photothermal conversion. It maintains structural stability and effectively purifies saline and dye-contaminated water.
- 2 December 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (7) , 4024-4035
Cationic defect-engineered CuMn 2 O 4 photothermal membranes to leverage interfacial solar steam generation
Defect-rich CMO NF membrane deliver broadband light absorption, enhanced hydrophilicity, and efficient photothermal conversion. It maintains structural stability and effectively purifies saline and dye-contaminated water.
MAX Phase Purity Contingent Interlayer Spacing Regulated Ti3C2‐F MXene Electrodes for Efficient Energy Storage Application
This study systematically explores impact of impurity‐induced defects in MAX phase on MXene quality and, hence, electrochemical performance. Structural defects in impure MAX phase are transferred to derived MXene and disrupt ion transport pathways by creating non‐uniform interlayer spacing, thereby hindering ion diffusion and reducing electrochemical efficiency. Notably, as the purity of Ti3AlC2 MAX phase increases from 47% to 99%, the interlayer spacing in MXene expands, significantly enhancing its electrochemical properties. Galvanostatic charge–discharge (GCD) measurements at 1 A g−1 reveal that the specific capacitance of MXene improves from 121.86 to 680.8 F g−1 with increasing MAX phase purity. Further enhancement to 918.5 F g−1 is achieved by incorporating carbon black (CB), which enhances the conductive network between MXene sheets. Symmetric battery‐type supercapacitor device assembled with CB@Ti₃C₂‐F electrodes exhibits specific capacity of 76.54 mAh g−1 (@1A g−1) over 1.65 V potential window, with energy density of 55.58 Wh kg−1 (@1A g−1) and power density of 1500.27 kW kg−1 (@10A g−1), surpassing previously reported values. Additionally, the device demonstrates excellent cycling stability, retaining 94% of its initial capacitance after 5000 charge–discharge cycles. This study underscores the critical role of MAX phase purity in regulating MXene interlayer spacing, thereby unlocking new opportunities for high‐performance hybrid energy storage systems.
MAX Phase Purity Contingent Interlayer Spacing Regulated Ti3C2‐F MXene Electrodes for Efficient Energy Storage Application
This study systematically explores impact of impurity‐induced defects in MAX phase on MXene quality and, hence, electrochemical performance. Structural defects in impure MAX phase are transferred to derived MXene and disrupt ion transport pathways by creating non‐uniform interlayer spacing, thereby hindering ion diffusion and reducing electrochemical efficiency. Notably, as the purity of Ti3AlC2 MAX phase increases from 47% to 99%, the interlayer spacing in MXene expands, significantly enhancing its electrochemical properties. Galvanostatic charge–discharge (GCD) measurements at 1 A g−1 reveal that the specific capacitance of MXene improves from 121.86 to 680.8 F g−1 with increasing MAX phase purity. Further enhancement to 918.5 F g−1 is achieved by incorporating carbon black (CB), which enhances the conductive network between MXene sheets. Symmetric battery‐type supercapacitor device assembled with CB@Ti₃C₂‐F electrodes exhibits specific capacity of 76.54 mAh g−1 (@1A g−1) over 1.65 V potential window, with energy density of 55.58 Wh kg−1 (@1A g−1) and power density of 1500.27 kW kg−1 (@10A g−1), surpassing previously reported values. Additionally, the device demonstrates excellent cycling stability, retaining 94% of its initial capacitance after 5000 charge–discharge cycles. This study underscores the critical role of MAX phase purity in regulating MXene interlayer spacing, thereby unlocking new opportunities for high‐performance hybrid energy storage systems.
- 23 December 2024
- Published by Wiley in Small Methods
- Vol. 9 (4) , e2401441
Probing Photo‐Assisted Charge Storage Mechanism Using Bi‐Fe Perovskite Oxide Electrode for Solar Supercapacitor
In this study, the rhombohedral crystalline pure phase BiFeO 3 (BFO) of irregularly shaped spherical particles of ≈100 nm and energy bandgap of ≈2.31 eV are synthesized by sol–gel auto‐combustion method and explored as electrode material for photo‐assisted supercapacitor. The electronic structure studies revealed that the coexistence of heterovalent Bi and Fe elements accelerated the electrochemical redox kinetics and photo‐assisted charge storage properties. The resonant photoemission studies confirmed that near the Fermi level, the valence band spectra comprised the Fe3d and O2p hybridized states. The Fe‐O hybridized state felicitates the charge transfer transitions (O2p (h + ) + hυ ↔ Fe 3+ + e − ↔ Fe 2+ ), which assists the intercalation/de‐intercalation process of OH − anions. Therefore, BFO has delivered 26.77% photo efficiency and the enhanced specific capacity of 21 Cg −1 at 2 Ag −1 in aq. 3 m KOH under illumination, which is attributed to the accelerated photo‐generated charge carrier separation and storage with surface polarization effect. BFO also delivered capacitance retention of 77.5% even after 1000 continuous GCD cycles under visible light irradiation.
- 23 December 2024
- Published by Wiley in Small Methods
- Vol. 9 (4) , e2401441
Probing Photo‐Assisted Charge Storage Mechanism Using Bi‐Fe Perovskite Oxide Electrode for Solar Supercapacitor
In this study, the rhombohedral crystalline pure phase BiFeO 3 (BFO) of irregularly shaped spherical particles of ≈100 nm and energy bandgap of ≈2.31 eV are synthesized by sol–gel auto‐combustion method and explored as electrode material for photo‐assisted supercapacitor. The electronic structure studies revealed that the coexistence of heterovalent Bi and Fe elements accelerated the electrochemical redox kinetics and photo‐assisted charge storage properties. The resonant photoemission studies confirmed that near the Fermi level, the valence band spectra comprised the Fe3d and O2p hybridized states. The Fe‐O hybridized state felicitates the charge transfer transitions (O2p (h + ) + hυ ↔ Fe 3+ + e − ↔ Fe 2+ ), which assists the intercalation/de‐intercalation process of OH − anions. Therefore, BFO has delivered 26.77% photo efficiency and the enhanced specific capacity of 21 Cg −1 at 2 Ag −1 in aq. 3 m KOH under illumination, which is attributed to the accelerated photo‐generated charge carrier separation and storage with surface polarization effect. BFO also delivered capacitance retention of 77.5% even after 1000 continuous GCD cycles under visible light irradiation.
- 16 December 2022
- Published by Wiley in Physica Status Solidi (a)
- Vol. 220 (2)
Evaluating the Potential of Lead‐Free Nontoxic Cs2BiAgI6‐Based Double Perovskite Solar Cell
Recently, the efficiency of single‐junction perovskite solar cells has been competing with the crystalline Si solar cells. However, the perovskite absorbers are toxic and susceptible to moisture. Herein, the performance of an environmentally benign and durable Cs2BiAgI6 light harvester using the 1D Solar Cell Capacitance Simulator (SCAPS‐1D) software package is evaluated. The primary physical parameters, namely, defect and doping densities and thickness of the subsequent layers, are varied to achieve high efficiencies. The optimized Cs2BiAgI6‐based double perovskite solar cells with three distinct hole‐transporting layers (HTLs) (i.e., MoO3, CuSCN, and spiro‐OMeTAD) deliver a power conversion efficiency of ≈29% with AZnO as electron transport layer (ETL). Further, a variety of possible rear electrodes are explored, and their effect on the performance is estimated. For real‐time examination of the Cs2BiAgI6‐based double perovskite solar cells, the variation of power conversion efficiency (PCE) concerning the operating temperature is estimated. The thickness of the Cs2BiAgI6 light harvester layer and the bulk defect density are the key aspects in attaining high power conversion efficiencies in Cs2BiAgI6‐based double perovskite solar cells.
- 16 December 2022
- Published by Wiley in Physica Status Solidi (a)
- Vol. 220 (2)
Evaluating the Potential of Lead‐Free Nontoxic Cs2BiAgI6‐Based Double Perovskite Solar Cell
Recently, the efficiency of single‐junction perovskite solar cells has been competing with the crystalline Si solar cells. However, the perovskite absorbers are toxic and susceptible to moisture. Herein, the performance of an environmentally benign and durable Cs2BiAgI6 light harvester using the 1D Solar Cell Capacitance Simulator (SCAPS‐1D) software package is evaluated. The primary physical parameters, namely, defect and doping densities and thickness of the subsequent layers, are varied to achieve high efficiencies. The optimized Cs2BiAgI6‐based double perovskite solar cells with three distinct hole‐transporting layers (HTLs) (i.e., MoO3, CuSCN, and spiro‐OMeTAD) deliver a power conversion efficiency of ≈29% with AZnO as electron transport layer (ETL). Further, a variety of possible rear electrodes are explored, and their effect on the performance is estimated. For real‐time examination of the Cs2BiAgI6‐based double perovskite solar cells, the variation of power conversion efficiency (PCE) concerning the operating temperature is estimated. The thickness of the Cs2BiAgI6 light harvester layer and the bulk defect density are the key aspects in attaining high power conversion efficiencies in Cs2BiAgI6‐based double perovskite solar cells.
- 16 June 2022
- Published by Taylor & Francis in Materials Technology
- Vol. 37 (14) , 2963-2969
Towards lead-free all-inorganic perovskite solar cell with theoretical efficiency approaching 23%
Single junction solar cells with organic-inorganic perovskites have achieved efficiency > 25%, yet they suffer from long-term durability and toxicity. Additionally, all the best-performing perovskite light harvesters contain lead, hindering their real-time application. Herein, we report preliminary studies with the SCPAS-1D software package on three different perovskite light harvesters, namely FAPbI3, FASnI3, and CsSnI3, considering an approach towards stable and environmentally benign perovskite light harvesters. Additionally, to extract the best performance, each perovskite light harvester is analysed with four electron transport layers, namely TiO2, SnO2, BaSnO3, and La doped BaSnO3. The physical parameters such as thickness, doping, and defect density are optimised for the subsequent films to deliver high performance. Further, the operating temperature-dependent variation in power conversion efficiency and other solar cell parameters are also analysed. In an attempt to replace the high-cost gold counter electrode, a comparative study on the performance of other possible counter electrodes is also comprehensively detailed.
- 16 June 2022
- Published by Taylor & Francis in Materials Technology
- Vol. 37 (14) , 2963-2969
Towards lead-free all-inorganic perovskite solar cell with theoretical efficiency approaching 23%
Single junction solar cells with organic-inorganic perovskites have achieved efficiency > 25%, yet they suffer from long-term durability and toxicity. Additionally, all the best-performing perovskite light harvesters contain lead, hindering their real-time application. Herein, we report preliminary studies with the SCPAS-1D software package on three different perovskite light harvesters, namely FAPbI3, FASnI3, and CsSnI3, considering an approach towards stable and environmentally benign perovskite light harvesters. Additionally, to extract the best performance, each perovskite light harvester is analysed with four electron transport layers, namely TiO2, SnO2, BaSnO3, and La doped BaSnO3. The physical parameters such as thickness, doping, and defect density are optimised for the subsequent films to deliver high performance. Further, the operating temperature-dependent variation in power conversion efficiency and other solar cell parameters are also analysed. In an attempt to replace the high-cost gold counter electrode, a comparative study on the performance of other possible counter electrodes is also comprehensively detailed.
- Open Access
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Theory Abide Experimental Investigations on Morphology Driven Enhancement of Electrochemical Energy Storage Performance for Manganese Titanate Perovskites Electrodes
The ultrathin 2D morphologies are found efficient in delivering better specific energy and long cycle life performance for supercapacitors. Therefore, we report the effect of morphological transformation from nanoparticles to ultrathin nanodiscs of MnTiO3(MTO) perovskites as an efficient electrode for electrochemical supercapacitor where the interconnected network of stacked ultrathin 2D nanodiscs provided easily accessible sites for efficient diffusion of OH - ions deep inside the electrode material. Ultrathin 2D MTO nanodiscs delivered a specific capacitance of 1513.7 F/g, specific capacity of 103.2 mAh/g, specific power of 1351.9 W/kg, and specific energy of 52.2 Wh/kg. Moreover, 85.1% capacitance retention after 5000 cycles in 2M aq. KOH electrolyte was observed with insignificant morphological deformation of 2D nanodiscs. Corresponding First-principles density functional theory (DFT) calculations revealed that ultrathin 2D morphology produced higher work-function and hence delivered better energy storage performance.
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Open AccessTheory Abide Experimental Investigations on Morphology Driven Enhancement of Electrochemical Energy Storage Performance for Manganese Titanate Perovskites Electrodes
The ultrathin 2D morphologies are found efficient in delivering better specific energy and long cycle life performance for supercapacitors. Therefore, we report the effect of morphological transformation from nanoparticles to ultrathin nanodiscs of MnTiO3(MTO) perovskites as an efficient electrode for electrochemical supercapacitor where the interconnected network of stacked ultrathin 2D nanodiscs provided easily accessible sites for efficient diffusion of OH - ions deep inside the electrode material. Ultrathin 2D MTO nanodiscs delivered a specific capacitance of 1513.7 F/g, specific capacity of 103.2 mAh/g, specific power of 1351.9 W/kg, and specific energy of 52.2 Wh/kg. Moreover, 85.1% capacitance retention after 5000 cycles in 2M aq. KOH electrolyte was observed with insignificant morphological deformation of 2D nanodiscs. Corresponding First-principles density functional theory (DFT) calculations revealed that ultrathin 2D morphology produced higher work-function and hence delivered better energy storage performance.