Andrey Denisenko

Микроволновый пиролиз древесины дуба: исследование процесса и характеристика продуктов

Peat reserves are of great interest for various industries (energy, fuel, chemical, etc.). It is common practice to use pyrolysis to process such solid carbon-containing resources with the subsequent yield of fuel and valuable products. One of the environmentally and energetically favorable ways to degrade carbon-containing feedstock that is currently under development is microwave-assisted pyrolysis. Microwave radiation provides volumetric heating of the material, which significantly increases heating uniformity across the volume of the irradiated sample, providing greater efficiency of heat transfer and avoiding local overheating on the reactor surface. In the conducted study, a system was designed for the microwave processing of organic materials. The structural elements of the system are described, and a schematic showing pyrolysis product separation is presented. A prototype of the developed reactor was used to conduct experiments on degrading high-moor sphagnum peat of the Greko-Ushakovskoe deposit under mild pyrolysis conditions induced by microwave radiation. The component composition of reaction products was analyzed via chromatography-mass spectrometry and compared with the results of previous experiments using conventional thermal pyrolysis. More advanced processing of peat is performed under the conditions of microwave-assisted mild pyrolysis with a high yield of valuable products due to a more efficient heat transfer, uniform heating of the material, and the optimal reaction rate. The developed technology is shown to produce raw materials for a wide range of high-tech industrial productions. The prospects for the industrial use of the proposed microwave-assisted peat processing technology are discussed, specifically for the production of efficient hydrophobic sorbent.

A series of theoretical and experimental studies was carried out with the aim of a direct comparison of the thermal and microwave destruction of peat during pyrolysis. Different heating mechanisms in these processes were investigated in the framework of simulations conducted using a commercial 3D software package, CST Studio Suite, to define their specific features. Based on these simulations, identical reactors were constructed exploiting an electric element and a microwave complex as a heat source, and an experimental technique was developed that allows these processes to be correctly compared under similar conditions. Using these reactors based on different heat sources, comparative experiments on peat pyrolysis were performed, and the results of the theoretical analysis were confirmed. As a result, the advantages of microwave exposure were demonstrated to achieve a more uniform and deep fragmentation of peat, increase the reaction rate and reduce the processing time, with high energy efficiency accompanying this method. As part of the experiments, the yield of pyrolysis products was analyzed. During the microwave destruction of peat, a high gas output (up to 27%) was obtained, which allows for a further increase in the efficiency of this processing method when burning these gases. The conducted elemental analysis showed an increase in the percentage of carbon from about 50% to 78% after microwave processing, which can become a raw material for obtaining effective environmentally friendly sorbents. The prospects for creating industrial microwave complexes for processing organic materials are discussed.

The design of a technological complex for microwave processing of organic materials is proposed. The electrodynamic system of an oversized microwave reactor for low-temperature pyrolysis has been developed. The constructive elements of the complex that allow its continuous failure-free operation in conditions of high radiation intensity are described. Based on the prototype of the elaborated reactor, model experiments on microwave pyrolysis of peat were carried out. The elemental composition of the solid fraction was analyzed during the conducted experiments. The possibility of the efficiency enhancement of the proposed processing method and potential applications of the novel technology are discussed.

Novel additive technology of the Chemical Metallization of Photopolymer-based Structures (CMPS) is under active elaboration currently at the IAP RAS (Nizhny Novgorod). The use of this technology has made it possible to implement components of electron–optical and electrodynamic systems for high-power microwave vacuum tubes, such as a gyrotron and a relativistic Cherenkov maser, the design and experimental studies of which are described in this paper. Within the framework of the gyrotron developments, we carried out a simulation of the distribution of the heat load on the collector of high-power technological gyrotron taking into account secondary emission. The prospect of a significant reduction in the maximum power density of the deposited electron beam was shown. The experimental study of the gyrotron collector module manufactured using CMPS technology demonstrated high potential for its further implementation. Recent results of theoretical and experimental studies of a spatially extended Ka-band Cherenkov maser are presented. In this oscillator, the 2D-periodical slow-wave structure made by the proposed technology was applied and a narrow-band generation regime was observed with a sub-GW power level. The design and simulations of a novel selective electrodynamic system for a high-harmonic gyrotron with the planned application of the CMPS technology are discussed.

Peat has attracted considerable interest as a potential source of alternative fuel in terms of improving hydrocarbons production and satisfying market demand. The next decade is likely to witness a raise in its exploitation. Nevertheless, the characteristics of peat pyrolysis process, via which many experts expect a considerable generation of hydrocarbons, have not been dealt with in depth. In the present study we have applied thermal analysis combined with isoconversional and model methods for clarifying the kinetic and thermodynamic aspects of the process of generating hydrocarbons from peat via pyrolysis in the absence and presence of iron tallates as a catalytic agent. The obtained results showed a positive effect of the opted catalyst on the process of peat pyrolysis. It has been shown that the catalyst is able to reduce the energy of activation of peat pyrolysis process. Moreover, the Gibbs energy, enthalpy and entropy of complex formation values have been found lower in the presence of iron tallates for all the applied isoconversional methods (Friedman and KAS). The evidence from the present study points toward the beneficial effect generated from the utilization of iron tallates in the processes of hydrocarbons generation from peat for improving energy production in the future.