Hui Xu
Research Subjects
Hui Xu has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Baojie Zhang
Key Laboratory for Advanced Ceramics and Machining Technology of Ministry of Education, School of Materials Science and Engineering, Tianjin University, Tianjin 300072, China
1 shared publication - Huiming Ji
Key Laboratory of Advanced Ceramics and Machining Technology of Ministry of Education, School of Materials Science and Engineering, Tianjin University, Tianjin 300350, China
1 shared publication Shuwei Zhang
AVIC Research Institute for Special Structures of Aeronautical Composite, Ji’nan, 250023, China
1 shared publicationSiyu Zhu
AVIC Research Institute for Special Structures of Aeronautical Composite, Ji’nan, 250023, China
1 shared publicationWeiwei Men
AVIC Research Institute for Special Structures of Aeronautical Composite, Ji’nan, 250023, China
1 shared publicationXiao Wu
AVIC Research Institute for Special Structures of Aeronautical Composite, Ji’nan, 250023, China
1 shared publication
Latest Publications
- Open Access
- 1 February 2026
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3175 (1)
High temperature resistant, high strength, high wave-transparent alumina fiber reinforced quartz ceramic matrix composites
In this paper, we propose a method for rapidly preparing alumina fibre-reinforced silica ceramic matrix (Al 2 O 3f /SiO 2 ) composites. This method involves four cycles of vacuum impregnation, sol-gel, and high-temperature sintering, using silica sol and alumina fibre as raw materials. The mechanical and dielectric properties of the composites were subjected to a systematic examination and characterisation. The results suggest that when the preparation temperature is set to 1000 °C, the prepared Al 2 O 3f /SiO 2 composites may exhibit the best mechanical properties. We are pleased to report that the specific performance of the material is as follows: flexural strength at room temperature reaches 129.84 MPa, tensile strength is 98.87 MPa, interlaminar shear strength is 13.38 MPa, and compressive strength is 122.20 MPa. At 1200 °C, the composite displays an encouraging retention rate of over 80% in high-temperature mechanical strength, which is a promising indication of its potential for high-temperature resistance. Furthermore, the Al 2 O 3f /SiO 2 composite displays a stable and low dielectric constant in the temperature range from room temperature to 1000 °C at 10 GHz, which is between 3.80 and 4.09. This suggests that the material may possess excellent dielectric properties in a high-temperature environment. It is hoped that this study will prove to be a valuable reference point for the preparation of Al 2 O 3f /SiO 2 composites and their potential applications in extreme conditions.
- 1 February 2026
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3175 (1)
Open AccessHigh temperature resistant, high strength, high wave-transparent alumina fiber reinforced quartz ceramic matrix composites
In this paper, we propose a method for rapidly preparing alumina fibre-reinforced silica ceramic matrix (Al 2 O 3f /SiO 2 ) composites. This method involves four cycles of vacuum impregnation, sol-gel, and high-temperature sintering, using silica sol and alumina fibre as raw materials. The mechanical and dielectric properties of the composites were subjected to a systematic examination and characterisation. The results suggest that when the preparation temperature is set to 1000 °C, the prepared Al 2 O 3f /SiO 2 composites may exhibit the best mechanical properties. We are pleased to report that the specific performance of the material is as follows: flexural strength at room temperature reaches 129.84 MPa, tensile strength is 98.87 MPa, interlaminar shear strength is 13.38 MPa, and compressive strength is 122.20 MPa. At 1200 °C, the composite displays an encouraging retention rate of over 80% in high-temperature mechanical strength, which is a promising indication of its potential for high-temperature resistance. Furthermore, the Al 2 O 3f /SiO 2 composite displays a stable and low dielectric constant in the temperature range from room temperature to 1000 °C at 10 GHz, which is between 3.80 and 4.09. This suggests that the material may possess excellent dielectric properties in a high-temperature environment. It is hoped that this study will prove to be a valuable reference point for the preparation of Al 2 O 3f /SiO 2 composites and their potential applications in extreme conditions.
- Open Access
Thermal Radiation Shielding and Mechanical Strengthening of Mullite Fiber/SiC Nanowire Aerogels Using In Situ Synthesized SiC Nanowires
Traditional solid nanoparticle aerogels have been unable to meet the requirements of practical application due to their inherent brittleness and poor infrared shielding performance. Herein, combining vacuum impregnation and high-temperature pyrolysis, a novel micro/nano-composite fibrous aerogel was prepared via in situ synthesis of silicon carbide nanowires (SiC NWS) in mullite fiber (MF) preform. During this process, uniformly distributed SiC NWS in the MF preform serve as an enhancement phase and also act as an infrared shielding agent to reduce radiation heat transfer, which can significantly improve the mechanical properties of the mullite fiber/silicon carbide nanowire composite aerogels (MF/SiC NWS). The fabricated MF/SiC NWS exhibited excellent thermal stability (1400 °C), high compressive strength (~0.47 MPa), and outstanding infrared shielding performance (infrared transmittance reduced by ~70%). These superior properties make them appealing for their potential in practical application as high-temperature thermal insulators.
Open AccessThermal Radiation Shielding and Mechanical Strengthening of Mullite Fiber/SiC Nanowire Aerogels Using In Situ Synthesized SiC Nanowires
Traditional solid nanoparticle aerogels have been unable to meet the requirements of practical application due to their inherent brittleness and poor infrared shielding performance. Herein, combining vacuum impregnation and high-temperature pyrolysis, a novel micro/nano-composite fibrous aerogel was prepared via in situ synthesis of silicon carbide nanowires (SiC NWS) in mullite fiber (MF) preform. During this process, uniformly distributed SiC NWS in the MF preform serve as an enhancement phase and also act as an infrared shielding agent to reduce radiation heat transfer, which can significantly improve the mechanical properties of the mullite fiber/silicon carbide nanowire composite aerogels (MF/SiC NWS). The fabricated MF/SiC NWS exhibited excellent thermal stability (1400 °C), high compressive strength (~0.47 MPa), and outstanding infrared shielding performance (infrared transmittance reduced by ~70%). These superior properties make them appealing for their potential in practical application as high-temperature thermal insulators.