RSRanran Sun

Ranran Sun

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ranran Sun has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Covert Communication in Satellite–Terrestrial Systems via Beamforming and Jamming

    by Zewei Guo, Ranran Sun, Yulong Shen, Xiaohong Jiang

    This paper considers the downlink covert communication in a satellite-terrestrial system consisting of a satellite transmitter Alice, a terrestrial receiver Bob, a passive terrestrial warden Willie, and a friendly terrestrial Jammer. By exploiting the covert beamforming for Alice-Bob transmission and null-space beamforming for Jammer-Willie jamming, we first propose a covert communication scheme with joint beamforming and jamming in the concerned system. We also provide theoretical modeling for the covert rate (CR) and detection error probability (DEP) under the covert scheme with perfect Willie's location information (WLI) or imperfect WLI. With careful consideration of the intrinsic propagation characteristics of satellite-terrestrial downlinks, we then investigate the optimal beamforming and jamming design for CR maximization under the fixed default setting of satellite antenna boresight and perfect/imperfect WLI, and develop an efficient algorithm based on semi-definite relaxation (SDR) to solve this optimization problem. We further explore the joint optimal design of beamforming, jamming and satellite antenna boresight for CR maximization under perfect/imperfect WLI, and apply the SDR and successive convex approximation (SCA) techniques to develop an efficient algorithm for solving such an optimization problem. Finally, we present extensive numerical results to verify our theoretical results and to illustrate the efficiency of the joint beamforming and jamming for supporting covert communication in satellite-terrestrial systems.


  • On Joint Covert and Secure Communications in D2D-Enabled Cellular Systems

    by Ranran Sun, Bin Yang, Yulong Shen, Xiaohong Jiang, Tarik Taleb

    This paper explores the joint covert and secure communications in a device-to-device (D2D)-enabled cellular system (DCS) consisting of a base station BS, an eavesdropper Eve, and two user equipments UE and UR. To conduct secure communications with UE against Eve, BS works either under the cellular mode using direct transmission or under the D2D mode replying through UR, while UR is greedy since it opportunistically transmits its own covert message to UE against the detection from BS. To understand the fundamental performance of secrecy rate and covert rate in DCS, we first develop theoretical models to depict the detection probability/secrecy rate of BS and covert rate of UR under different modes (i.e., underlay, overlay, or cellular). Based on these models, we further explore the secrecy rate maximization (SRM) for BS subject to the constraints of detection probability at BS and transmit power at both BS and UR, as well as the covert rate maximization (CRM) for UR subject to the constraints of covertness requirement and covert transmit power. Finally, we employ the Newton-based searching method to solve the SRM/CRM problems and illustrate via numerical results the achievable secrecy rate and covert rate of BS and UR under various DCS scenarios.


  • Covert Communication in D2D Underlaying Cellular Networks With Multiple Colluding Wardens

    by Yanchun Zuo, Jingsen Jiao, Ranran Sun, Yulong Shen, Yanping Chen, Weidong Yang, Xiaohong Jiang

    This paper investigates the covert communication in a D2D underlaying cellular network consisting of a cellular transmitter, a base station, a cellular receiver, multiple colluding wardens, and an underlaid D2D pair with a transmitter and a receiver. For multiple colluding wardens, they fuse their observations to a fusion center (FC) with the maximum ratio combining (MRC) scheme and the equal gain combining (EGC) scheme. To protect the covert communication between the cellular transmitter and the base station from being detected by multiple colluding wardens, the underlaid D2D transmitter reuses the spectrum of the cellular user to transmit its signal to the D2D receiver with a random power to deliberately confuse multiple colluding wardens. We first provide the basic theoretical results for the detection performance of FC under MRC and EGC, respectively, i.e., the optimal detection threshold, the minimum detection error probability and its average value. We then explore the modeling of the average covert rate as well as the optimal power control for average covert rate maximization to enhance the covert performance under MRC and EGC. Finally, extensive numerical and simulation results are presented to validate theoretical analysis and also to illustrate the effects of some important system parameters on the average minimum detection error probability, the average covert rate, and the maximum average covert rate under MRC and EGC, respectively. We can find that the detection performance of multiple colluding wardens under the MRC scheme is better than that under the EGC scheme.


  • A Coupling Strength Estimation Method Based on Circular Scanning Data

    by Zuo Yanchun, Wang Wenyan, Sun Ranran, Liu Wei, Guo Lixin

    Coupling between complex structures causes extra scattering centers, which reduces the recognition rate of a target. Meanwhile, finding the coupled scattering centers and analyzing their coupling strength help to alleviate the computational burden by ignoring energy transition between weakly coupled structures. The coupling between two scattering centers is first studied in this letter. The trail function of the extra scattering center caused by the coupling effect in circular scanning mode is derived. The trails and the coupled scattering centers are then extracted using the differential evolution algorithm (DEA). The kernel idea of the coupled scattering determination is to find which two scattering points will cause such coupled trails with the help of the derived trail function and DEA. Following this, the value of each pixel on a trail is summarized to obtain the coupling strength for a pair of scattering centers. Simulation and measurements are finally performed to verify and show the performance of the proposed method. Results indicate that the proposed method accurately predicts the scattering centers with a coupling trail. We also estimate the coupling strength of the model plane, tank, and ship. Analysis shows that complex structures produce coupling scattering and provide more extra scattering centers.

  • A Credit Test Center Determination Method for Circular RCS Measurement Scenarios

    by Zuo Yanchun, Wang Wenyan, Sun Ranran, Guo Lixin, Liu Wei, Liao Guisheng

    An inappropriate installation location of a target on a turntable in scattering measurements causes inessential radar cross section (RCS) fluctuations, which increases the miss-detection probability of peaks in the target's scattering and the test cost for high-accuracy measurements. This letter proposes a credit test location prediction method to obtain the minimum RCS fluctuation. First, a pre-test is conducted to obtain the scattering of a target. Then, the back projection (BP) method is used to access the image of the target under test. Following this, the fluctuation of the RCS is described using the coefficient of variation (CV). Next, the particle swarm optimization (PSO) algorithm is used to minimize the CV of the RCS for determining the credit test location transformation vector. The verification of the presented method is conducted in the aspects of simulations and indoor measurements. Results show that the presented method reduces the CV of the RCS by 12% for simulations and 22% for measurements.


  • On Covert Rate in Full-Duplex D2D-Enabled Cellular Networks With Spectrum Sharing and Power Control

    by Ranran Sun, Huihui Wu, Bin Yang, Yulong Shen, Weidong Yang, Xiaohong Jiang, Tarik Taleb

    This paper investigates the fundamental covert rate performance in a D2D-enabled cellular network consisting of a cellular user Alice, a base station BS, an active warden Willie, and a D2D pair with a transmitter $D_{t}$ and a full-duplex receiver $D_{r}$ . To conduct covert communication between Alice and BS, the full-duplex $D_{r}$ transmits jamming signal to confuse the active Willie and also receives signal from $D_{t}$ simultaneously. With spectrum sharing, $D_{t}$ can operate over either an underlay mode reusing cellular spectrum or an overlay mode using dedicated spectrum. With power control, $D_{r}$ can send jamming signal to confuse Willie's detection of the transmission from Alice. We first provide theoretical results for the outage probabilities of the cellular and D2D transmissions, the average minimum detection error probability at Willie, and the achievable covert rate from Alice to BS. We then explore the power control for covert rate maximization (CRM) under the underlay mode as well as the joint designs of power control and spectrum partition for CRM under the overlay mode. We further consider a mode selection that flexibly switches between these two modes with a probability, and also investigate the covert rate modeling and joint designs of power control, spectrum partition and mode selection probability for CRM. Finally, numerical results are presented to illustrate the covert rate performances of the network under the underlay mode, overlay mode and mode selection.


  • A Credit Region Determination Method for Scattering Coefficient Measurement

    by Yanchun Zuo, Danyang Li, Lixin Guo, Ranran Sun, Wei Liu, Guisheng Liao

    The scattering coefficient is an important index to denote the electromagnetic (EM) scattering ability of a region. In outdoor test scenarios, the detection range, the antenna gain, and the scattering coefficient difference at each region element cause measurement errors. However, the traditional test strategies do not take into account these factors and the method to reduce the influence of these factors on scattering coefficient measurement. This letter first finds the relationships between the measurement errors and the detection range/antenna gain/scattering coefficient of each test region element using Taylor's formula and radar range equation. Then, a credit test region is obtained according to the required error bound and the relationships. Outdoor measurements and theoretical calculations verify the presented method. Results show that the measurement error is small when the test region is located in the credit region. Otherwise, measurement errors increase in the case of the test region larger than the credit region.


  • A Test Quality Estimation Method for UAV Outdoor Composite Scattering Measurement

    by Zuo Yanchun, Guo Lixin, Liu Wei, Sun Ranran, Zhang Peipeng, Wang Rui

    The test quality estimation of an Unmanned Aerial Vehicle (UAV) scattering measurement system is important to target detection and remote sensing. The kernel issue is to obtain credible scattering results, which give a ground truth for the test quality estimation. However, it is quite difficult to obtain these characteristics due to the limitation of test facilities. To tackle the mentioned problem and give a test quality estimation criteria for the UAV system, the geometric model of the test region is first reconstructed using a physical-based Convolutional Neural Network (CNN) and a self-designed vehicle scattering measurement system. Then, Shooting and Bouncing Rays (SBR) method is used to obtain accurate scattering of the test region. Finally, test errors and qualities are evaluated. Simulations and experiments are conducted to verify the geometric reconstruction and scattering calculation algorithms. Results show that the key error sources of the UAV scattering measurement system are observation angle and position deviations. The maximum and the minimum test quality of the UAV measurement system are 4.393 and 88.780, respectively.


  • Covertness and Secrecy Study in Untrusted Relay-Assisted D2D Networks

    by Ranran Sun, Bin Yang, Yulong Shen, Xiaohong Jiang, Tarik Taleb

    This article investigates the covertness and secrecy of wireless communications in an untrusted relay-assisted device-to-device (D2D) network consisting of a full-duplex base station (BS), a user equipment (UE), and an untrusted relay ${R}$ . For the covertness, we attempt to prevent Willie from detecting the very existence of communications via a D2D link from UE to R and cellular link from R to BS, while for the secrecy, we aim to prevent the untrusted relay from eavesdropping the UE message. To explore the fundamental covertness and secrecy in such a network, we first provide theoretical modelings for the average minimum detection error rate of Willie, and the average covert/secrecy rate from UE to BS under the underlay and overlay modes, respectively. Based on these models, th we further explore the optimal power control at UE, R, and BS to achieve the average covert rate maximization (MCR) for UE with the constraints of covertness and security requirements under the underlay mode. We also identify the optimal transmit powers and the optimal spectrum partition factor for MCR under the overlay mode. Finally, the exhaust searching method is adopted to solve the MCR problems, and extensive numerical and simulation results are presented to validate our theoretical analysis and to illustrate the average covert rate and secrecy rate of UE under various scenarios.


  • Covert Rate Maximization in Wireless Full-Duplex Relaying Systems With Power Control

    by Ranran Sun, Bin Yang, Siqi Ma, Yulong Shen, Xiaohong Jiang

    This paper investigates the fundamental covert rate performance in a wireless relaying system consisting of a source-destination pair, a full-duplex (FD) relay and a warden, where the relay can work at either the FD mode or the half-duplex (HD) mode. We first provide theoretical modeling for the instantaneous/average covert rate when the system works solely under the FD mode or HD mode, and then explore the corresponding optimal transmit power control of relay for the covert rate maximization. For an improvement of covert rate, we further propose a joint FD/HD mode that flexibly switches between the FD and HD modes depending on channel state of the relay self-interference channel. Under the joint FD/HD mode, we also examine the related problems of theoretical modeling for covert rate and optimal transmit power control of relay for covert rate maximization. Finally, extensive numerical results are provided to illustrate the covert rate performances of the relaying system under the FD, HD and joint FD/HD modes.