Aijun Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Aijun Li has a total of 73 co-authors. Here are the top co-authors by number of shared publications:
- Xiao-Feng Wang
Jilin University
7 shared publications - Zhiwei Men
College of Physics, Jilin University, Changchun 130012, China
5 shared publications - Haixin Wang
Key Laboratory of Physics and Technology for Advanced Batteries, College of Physics, Jilin University 1 , Changchun 130012, China
3 shared publications Hitoshi Tamiaki
Graduate School of Life Sciences, Ritsumeikan University 3 , Kusatsu, Shiga 525-8577
3 shared publications- Wei Zhang
Nanjing University of Science and Technology
3 shared publications - Wenhui Fang
School of Physics, Changchun University of Science and Technology 1 , Changchun 130022
3 shared publications
Latest Publications
- 27 April 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (17)
Synergistic chlorophyll-derived polymer/NiOx hybrid electrodes for enhanced-performance biobased supercapacitors
Chlorophyll (Chl) and its derivatives have emerged as promising pseudocapacitive electrode materials. Nevertheless, substantial challenges remain in further improving their electrochemical performance. To address these challenges, a composite electrode was developed based on a natural Chl-derived polymer, denoted as Poly(NiChl-deoxo), in combination with nickel oxide (NiOx). A porous NiOx interlayer was introduced as an interfacial modifier to synergistically improve electrochemical properties. Porous NiOx films were first fabricated on ITO substrates via spin-coating, followed by electrochemical polymerization of NiChl-deoxo onto these modified surfaces. Characterization results revealed that the significantly increased specific surface area of the Poly(NiChl-deoxo) layer, along with interfacial interactions between NiOx and Poly(NiChl-deoxo), synergistically contributed to the enhanced specific capacitance of the composite electrode. The optimized composite electrode exhibited a specific capacitance of 790 F g−1 at 5 mV s−1 and 626 F g−1 at 1 A g−1. A symmetric supercapacitor based on this composite delivers a specific capacitance of 110 F g−1 at 1 A g−1 and an energy density of 3.8 Wh kg−1. This study demonstrates that the interfacial engineering strategy effectively overcomes the performance limitations of Chl-based electrode materials, offering a novel pathway toward sustainable and environmentally friendly supercapacitors.
- 27 April 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (17)
Synergistic chlorophyll-derived polymer/NiOx hybrid electrodes for enhanced-performance biobased supercapacitors
Chlorophyll (Chl) and its derivatives have emerged as promising pseudocapacitive electrode materials. Nevertheless, substantial challenges remain in further improving their electrochemical performance. To address these challenges, a composite electrode was developed based on a natural Chl-derived polymer, denoted as Poly(NiChl-deoxo), in combination with nickel oxide (NiOx). A porous NiOx interlayer was introduced as an interfacial modifier to synergistically improve electrochemical properties. Porous NiOx films were first fabricated on ITO substrates via spin-coating, followed by electrochemical polymerization of NiChl-deoxo onto these modified surfaces. Characterization results revealed that the significantly increased specific surface area of the Poly(NiChl-deoxo) layer, along with interfacial interactions between NiOx and Poly(NiChl-deoxo), synergistically contributed to the enhanced specific capacitance of the composite electrode. The optimized composite electrode exhibited a specific capacitance of 790 F g−1 at 5 mV s−1 and 626 F g−1 at 1 A g−1. A symmetric supercapacitor based on this composite delivers a specific capacitance of 110 F g−1 at 1 A g−1 and an energy density of 3.8 Wh kg−1. This study demonstrates that the interfacial engineering strategy effectively overcomes the performance limitations of Chl-based electrode materials, offering a novel pathway toward sustainable and environmentally friendly supercapacitors.
- 16 December 2025
- Published by American Physical Society (APS) in Physical Review A
- Vol. 112 (6)
Two-dimensional asymmetric diffraction induced by vortex light in quantum-dot-molecule systems under spontaneously generated coherence
- 16 December 2025
- Published by American Physical Society (APS) in Physical Review A
- Vol. 112 (6)
Two-dimensional asymmetric diffraction induced by vortex light in quantum-dot-molecule systems under spontaneously generated coherence
- 26 April 2025
- Published by Springer Nature in Optical and Quantum Electronics
- Vol. 57 (5) , 1-13
The study of two-dimensional electromagnetically induced grating in a partially closed M-type atomic model
- 26 April 2025
- Published by Springer Nature in Optical and Quantum Electronics
- Vol. 57 (5) , 1-13
The study of two-dimensional electromagnetically induced grating in a partially closed M-type atomic model
- 24 October 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (23) , 40719-40729
Stimulated Raman scattering and enhancement mechanisms in alkali metal hydroxide aqueous solutions under laser-induced dynamic pressure
Stimulated Raman scattering (SRS) in lithium hydroxide-water/heavy water (LiOH-H2O/D2O) solutions with varying concentrations was investigated under laser-induced high-pressure conditions using an Nd: YAG laser. The spectra revealed a significant enhancement in SRS signals, characterized by the emergence of low-wavenumber Raman peaks and a shift of the main SRS peak of liquid water to lower frequencies, evolving from a single peak to two or three peaks, which suggested the formation of an ice-like structure. Additionally, the normalized SRS intensity was higher than that of pure water. The enhancement of SRS signals during LiOH dissolution was attributed to the cooperative modulation between hydrogen bonding (HB, O-H:O) by OH- and Coulombic electronic interactions generated by monovalent Li+, which strengthened HB interactions, increased the Raman gain coefficient, and induced structural modifications akin to pressure effects. Besides, the increased density amplified the dynamic high-pressure effects during the laser-induced breakdown (LIB) process, further boosting the SRS signals. This work provides valuable insights into the interaction mechanisms between alkali metal hydroxides and H2O/D2O under laser-induced pressure conditions, offering a comprehensive approach to understanding and enhancing the SRS effect in aqueous solutions.
- 24 October 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (23) , 40719-40729
Stimulated Raman scattering and enhancement mechanisms in alkali metal hydroxide aqueous solutions under laser-induced dynamic pressure
Stimulated Raman scattering (SRS) in lithium hydroxide-water/heavy water (LiOH-H2O/D2O) solutions with varying concentrations was investigated under laser-induced high-pressure conditions using an Nd: YAG laser. The spectra revealed a significant enhancement in SRS signals, characterized by the emergence of low-wavenumber Raman peaks and a shift of the main SRS peak of liquid water to lower frequencies, evolving from a single peak to two or three peaks, which suggested the formation of an ice-like structure. Additionally, the normalized SRS intensity was higher than that of pure water. The enhancement of SRS signals during LiOH dissolution was attributed to the cooperative modulation between hydrogen bonding (HB, O-H:O) by OH- and Coulombic electronic interactions generated by monovalent Li+, which strengthened HB interactions, increased the Raman gain coefficient, and induced structural modifications akin to pressure effects. Besides, the increased density amplified the dynamic high-pressure effects during the laser-induced breakdown (LIB) process, further boosting the SRS signals. This work provides valuable insights into the interaction mechanisms between alkali metal hydroxides and H2O/D2O under laser-induced pressure conditions, offering a comprehensive approach to understanding and enhancing the SRS effect in aqueous solutions.
- 23 October 2024
- Published by IOP Publishing in Journal of Physics B: Atomic, Molecular and Optical Physics
- Vol. 57 (22) , 225403
All-optical switch for input-output-independent logic gate construction in atomic systems
We propose an input–output independent logic gate via optical switching effect in a four-level tripod atomic model. The intensity, line shape and detuning of the probe field and the switching field of the switch are investigated. Unlike previous research on all-optical switches, there are two switching fields as inputs and one probe field as output in this model. This enables an ‘or’ logic gate in which the input and output can be controlled independently. Thus, we can control the output ‘on’ and ‘off’ through two switching fields and freely adjust the strength of the output without changing the switching field. By adjusting the coherence conditions, ideal optical switching phenomena such as higher switching efficiency and larger switching speed are realized, which provides new ideas for designing optical communication or optical gain devices.
- 23 October 2024
- Published by IOP Publishing in Journal of Physics B: Atomic, Molecular and Optical Physics
- Vol. 57 (22) , 225403
All-optical switch for input-output-independent logic gate construction in atomic systems
We propose an input–output independent logic gate via optical switching effect in a four-level tripod atomic model. The intensity, line shape and detuning of the probe field and the switching field of the switch are investigated. Unlike previous research on all-optical switches, there are two switching fields as inputs and one probe field as output in this model. This enables an ‘or’ logic gate in which the input and output can be controlled independently. Thus, we can control the output ‘on’ and ‘off’ through two switching fields and freely adjust the strength of the output without changing the switching field. By adjusting the coherence conditions, ideal optical switching phenomena such as higher switching efficiency and larger switching speed are realized, which provides new ideas for designing optical communication or optical gain devices.
- 2 September 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (10)
Cascaded four-wave mixing process: A key to realize super-continuous coherent radiation with dual stimulated Raman scattering in mixed solutions
We proposed a coherent radiation scheme based on double-stimulated Raman scattering (SRS) induced cascaded four-wave mixing (FWM) in a mixed methanol–ethanol solution. The SRS of methanol has two characteristic vibrational peaks, which are attributed to the symmetric stretching vibration of –CH3 and the antisymmetric stretching vibration of –CH3. The addition of ethanol enhances the antisymmetric stretching vibration mode, and intensities of two peaks were similar when the volume ratio of methanol to ethanol was 7.5:2.5. Resonant amplification of the two SRS signals is achieved by refocusing the scattered light, and the stronger self-focusing effect not only converges the two beams but also generates a plasma-enhanced SRS process, realizing cascaded FWM. The frequency difference Δω between two FWM beams matches the frequency difference ΔΩ between the vibrational energy levels of the symmetric and antisymmetric stretching vibrations, and the stimulated excitation enhances FWM signals. The output coherent radiation light is a large broadband ranging from 592 to 668 nm and 721 to 797 nm, with a wavelength interval of about 3 nm. The intensity of light radiated at different wavelengths is not the same, with the strongest light at the center of the wavelength (630 and 759 nm). This technique has the potential to contribute to the development of a multi-wavelength cascaded Raman laser.
- 2 September 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (10)
Cascaded four-wave mixing process: A key to realize super-continuous coherent radiation with dual stimulated Raman scattering in mixed solutions
We proposed a coherent radiation scheme based on double-stimulated Raman scattering (SRS) induced cascaded four-wave mixing (FWM) in a mixed methanol–ethanol solution. The SRS of methanol has two characteristic vibrational peaks, which are attributed to the symmetric stretching vibration of –CH3 and the antisymmetric stretching vibration of –CH3. The addition of ethanol enhances the antisymmetric stretching vibration mode, and intensities of two peaks were similar when the volume ratio of methanol to ethanol was 7.5:2.5. Resonant amplification of the two SRS signals is achieved by refocusing the scattered light, and the stronger self-focusing effect not only converges the two beams but also generates a plasma-enhanced SRS process, realizing cascaded FWM. The frequency difference Δω between two FWM beams matches the frequency difference ΔΩ between the vibrational energy levels of the symmetric and antisymmetric stretching vibrations, and the stimulated excitation enhances FWM signals. The output coherent radiation light is a large broadband ranging from 592 to 668 nm and 721 to 797 nm, with a wavelength interval of about 3 nm. The intensity of light radiated at different wavelengths is not the same, with the strongest light at the center of the wavelength (630 and 759 nm). This technique has the potential to contribute to the development of a multi-wavelength cascaded Raman laser.
- 26 August 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (9)
Switched symmetric vibration SRS of −CxH2 by hydrogen bonding regulating conformations of aqueous NPA solution
Molecular conformation is an important characteristic feature of chemistry and physics, which exists in organic molecules. Based on the hydrogen bonding (HB) regulating conformations, we proposed a scheme to switch the stimulated Raman scattering peak from the symmetric vibration mode of −CαH2 (2878 cm−1) to that of −CβH2 (2937 cm−1) of n-propanol (NPA) aqueous solution with a volume fraction of 0.55. The dominant association structure can be converted from NPA–NPA to NPA–H2O by the HB network between H2O and NPA, and the HB structures were investigated through density functional theory calculations. The changes in intramolecular vibrational modes have effect on the relative abundances of NPA molecules by intermolecular HBs. This study can be extended to explore other organic molecular conformations in mixing solutions.
- 26 August 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (9)
Switched symmetric vibration SRS of −CxH2 by hydrogen bonding regulating conformations of aqueous NPA solution
Molecular conformation is an important characteristic feature of chemistry and physics, which exists in organic molecules. Based on the hydrogen bonding (HB) regulating conformations, we proposed a scheme to switch the stimulated Raman scattering peak from the symmetric vibration mode of −CαH2 (2878 cm−1) to that of −CβH2 (2937 cm−1) of n-propanol (NPA) aqueous solution with a volume fraction of 0.55. The dominant association structure can be converted from NPA–NPA to NPA–H2O by the HB network between H2O and NPA, and the HB structures were investigated through density functional theory calculations. The changes in intramolecular vibrational modes have effect on the relative abundances of NPA molecules by intermolecular HBs. This study can be extended to explore other organic molecular conformations in mixing solutions.
- 20 February 2024
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 57 (20) , 205502
ZnO/Ti3C2T x composite photoanodes for efficient dye-sensitized solar cells
Dye-sensitized solar cells (DSSC) have gained significant attention as a promising photovoltaic technology due to their simple fabrication methods and low cost. To improve the competitiveness of DSSC against other photovoltaic devices, enhancing the efficiency is crucial. In this study, we explore the incorporation of Ti3C2T x , a two-dimensional (2D) material known for its excellent conductivity, into the fabrication of composite photoanode films for DSSC. We prepared ZnO/Ti3C2T x composite films with different concentration of 0.1%, 0.2% and 0.4 wt%. The optimal photoelectric conversion efficiency (PCE) of 6.65% was achieved at a Ti3C2T x concentration of 0.2 wt%, representing a 41.4% improvement compared with 4.70% conversion efficiency of pure ZnO films. The introduction of Ti3C2T x facilitated electron transport and increased electron transfer pathways, which enhanced photoelectric performance. These findings highlight the potential of Ti3C2T x based composite photoanode for advancing the efficiency of DSSC.
- 20 February 2024
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 57 (20) , 205502
ZnO/Ti3C2T x composite photoanodes for efficient dye-sensitized solar cells
Dye-sensitized solar cells (DSSC) have gained significant attention as a promising photovoltaic technology due to their simple fabrication methods and low cost. To improve the competitiveness of DSSC against other photovoltaic devices, enhancing the efficiency is crucial. In this study, we explore the incorporation of Ti3C2T x , a two-dimensional (2D) material known for its excellent conductivity, into the fabrication of composite photoanode films for DSSC. We prepared ZnO/Ti3C2T x composite films with different concentration of 0.1%, 0.2% and 0.4 wt%. The optimal photoelectric conversion efficiency (PCE) of 6.65% was achieved at a Ti3C2T x concentration of 0.2 wt%, representing a 41.4% improvement compared with 4.70% conversion efficiency of pure ZnO films. The introduction of Ti3C2T x facilitated electron transport and increased electron transfer pathways, which enhanced photoelectric performance. These findings highlight the potential of Ti3C2T x based composite photoanode for advancing the efficiency of DSSC.
- Open Access
- 27 November 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (22)
Hydrogen bonding switched symmetric and anti-symmetric vibrations SRS of –CH2 in aqueous DEG solution
The symmetric and anti-symmetric stretching vibrations of C–H extensively exist in organic molecules, which constantly arise together in Raman spectroscopy. In this study, a method was presented to switch stimulated Raman scattering peak from symmetric vibrations (2870 cm−1) to anti-symmetric vibrations (2924 cm−1) of –CH2 by regulating the hydrogen bonding (HB) associated through intermolecular and intramolecular in diethylene glycol (DEG) molecules. Such dominant association structure can be converted from DEG-DEG to DEG-H2O in the aqueous DEG solutions. The interaction between H2O and DEG was investigated through the density functional theory calculation. The changes in intermolecular HB have effects on the intramolecular vibrational modes by the intermolecular forces and symmetry of the DEG molecule. This study has exciting potential prospect and can be extended to other mixing solutions.
- 27 November 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (22)
Open AccessHydrogen bonding switched symmetric and anti-symmetric vibrations SRS of –CH2 in aqueous DEG solution
The symmetric and anti-symmetric stretching vibrations of C–H extensively exist in organic molecules, which constantly arise together in Raman spectroscopy. In this study, a method was presented to switch stimulated Raman scattering peak from symmetric vibrations (2870 cm−1) to anti-symmetric vibrations (2924 cm−1) of –CH2 by regulating the hydrogen bonding (HB) associated through intermolecular and intramolecular in diethylene glycol (DEG) molecules. Such dominant association structure can be converted from DEG-DEG to DEG-H2O in the aqueous DEG solutions. The interaction between H2O and DEG was investigated through the density functional theory calculation. The changes in intermolecular HB have effects on the intramolecular vibrational modes by the intermolecular forces and symmetry of the DEG molecule. This study has exciting potential prospect and can be extended to other mixing solutions.
- Open Access
- 22 November 2023
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 13 (49) , 34808-34816
Dye-sensitized solar cells based on highly catalytic CNTs/Ti 3 C 2 T x MXenes composite counter electrode
Establishing stable and efficient Pt-free counter electrodes (CEs) is an important challenge for dye-sensitized solar cells (DSSCs). Ti3C2Tx MXene, with its high catalytic activity and conductivity, has gained attention as a CE in DSSCs. The focus of this paper is on the preparation of Ti3C2Tx decorated carbon nanotubes (CNTs) composite electrode materials (CNTs/Ti3C2Tx), and testing their performance as CEs in DSSCs. Through a series of electrochemical tests, a CNTs/Ti3C2Tx CE exhibits good electrocatalytic activity toward iodine-based electrolytes with low charge transfer resistance, which is close to the performance of a Pt CE. The photoelectric conversion efficiency (PCE) of the CNTs/Ti3C2Tx (1.0 wt%) CE-based DSSCs reaches 5.83%, which is much higher than that of the CNTs CE (3.70%), and approximates that of the Pt CE (6.61%). We attribute the improved performance to the synergistic effect of the excellent conductivity and unique two-dimensional chemical structure of Ti3C2Tx MXene. Moreover, the photostability test of continuous light exposure shows that the CNTs/Ti3C2Tx-1.0 wt% (C/T-1.0 wt%) CE exhibits good stability to the electrolyte. Therefore, CNTs/Ti3C2Tx composites can be used as an efficient Pt-free CE for DSSCs in the future.
- 22 November 2023
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 13 (49) , 34808-34816
Open AccessDye-sensitized solar cells based on highly catalytic CNTs/Ti 3 C 2 T x MXenes composite counter electrode
Establishing stable and efficient Pt-free counter electrodes (CEs) is an important challenge for dye-sensitized solar cells (DSSCs). Ti3C2Tx MXene, with its high catalytic activity and conductivity, has gained attention as a CE in DSSCs. The focus of this paper is on the preparation of Ti3C2Tx decorated carbon nanotubes (CNTs) composite electrode materials (CNTs/Ti3C2Tx), and testing their performance as CEs in DSSCs. Through a series of electrochemical tests, a CNTs/Ti3C2Tx CE exhibits good electrocatalytic activity toward iodine-based electrolytes with low charge transfer resistance, which is close to the performance of a Pt CE. The photoelectric conversion efficiency (PCE) of the CNTs/Ti3C2Tx (1.0 wt%) CE-based DSSCs reaches 5.83%, which is much higher than that of the CNTs CE (3.70%), and approximates that of the Pt CE (6.61%). We attribute the improved performance to the synergistic effect of the excellent conductivity and unique two-dimensional chemical structure of Ti3C2Tx MXene. Moreover, the photostability test of continuous light exposure shows that the CNTs/Ti3C2Tx-1.0 wt% (C/T-1.0 wt%) CE exhibits good stability to the electrolyte. Therefore, CNTs/Ti3C2Tx composites can be used as an efficient Pt-free CE for DSSCs in the future.