BSBoni Sena

Boni Sena

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Boni Sena has a total of 46 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Perbandingan simulasi pendekatan non-lean, lean, dan green lean pada produksi penutup transmisi roda gigi otomotif

    by Rinaldi Suzatmiko, Jojo Sumarjo, Ujiburrahman, Syafrie Syamsudin Affandi, Edrianzah Rahmat, Dandy Allegra Saputera, Boni Sena, Anisa Zahra Nabila, Tiara Safira Basari, Deri Teguh Santoso, et al.

    Industri komponen otomotif menuntut peningkatan efisiensi, kualitas, dan keberlanjutan produksi. Penelitian ini bertujuan membandingkan kinerja sistem manufaktur Non-Lean, Lean, dan Green Lean untuk menentukan konfigurasi yang paling optimal. Metode yang digunakan adalah Discrete Event Simulation berbasis Python dengan model produksi yang identik pada setiap skenario. Evaluasi kinerja mencakup indikator operasional, kualitas, ekonomi, dan lingkungan, yaitu cycle time, throughput, tingkat cacat, dan konsumsi energi. Hasil simulasi menunjukkan penurunan cycle time dari 58,10 menjadi 32,16 menit (±45%) serta peningkatan throughput dari 24,09 menjadi 43,52 unit/hari. Tingkat cacat menurun dari 13,2% menjadi 5,1%, sementara konsumsi energi berkurang dari 1,05 menjadi 0,6565 kWh per unit. Lean meningkatkan efisiensi proses dan kualitas, sedangkan Green Lean memberikan peningkatan lanjutan pada efisiensi energi dan pengurangan limbah. Penelitian ini menunjukkan bahwa integrasi Lean dan prinsip lingkungan menghasilkan kinerja sistem yang lebih optimal dengan konsekuensi peningkatan kompleksitas operasional

  • Open Access

    STABILITY OF NON-SURFACTANT WATER AND HYDROGEN PEROXIDE EMULSIONS IN B0 AND B35 USING INLINE MIXER

    by Muhammad Fariedz Irawan, Frendy Rian Saputro, Dhani Avianto Sugeng, Agus Mulyana, Kurnia Fajar Adhi Sukra, Fakhrul Afif Uzair, Wira Jazair Yahya, Rizqon Fajar, Boni Sena, Ujiburrahman Ujiburrahman

    Hydrogen peroxide (H2O2) enrichment is known to enhance combustion efficiency in diesel engines; however, its application as an emulsion is restricted by phase instability in the absence of chemical surfactants. This study investigates the stability and temperature characteristics of non-surfactant emulsions produced using an inline mixer known as the Real-Time Emulsion Supply System (RTES). Four emulsion types were formulated using water and aqueous H2O2 (5-15 vol%) as the dispersed phase, with neat diesel (B0) and biodiesel (B35) serving as the continuous phase: water-in-B0 (WD), H2O2-in-B0 (HD), water-in-B35 (WB), and H2O2-in-B35 (HB). The emulsions were prepared using RTES with a residence time of 180 s. During the preparation, the temperature was continuously recorded using a Graphtec GL840 data logger. The phase separation was monitored over 600 s using a Canon-EM3 camera. Results demonstrate that B35-based emulsions exhibit higher stability compared to B0-based emulsions. The stability tests showed distinct phase separation ratios for each formulation: 12.67% for WD, 10.67% for HD, 4.67% for WB, and 4.27% for HB. Meanwhile, the temperature rise (ΔT) varied slightly by formulation, ranging from 1.67-1.97 °C for WD and HD, and from 2.33-2.73 °C for WB and HB.

  • Open Access

    ANALYSIS OF EMISSION CHARACTERISTICS OF A B35 WITH HYDROGEN PEROXIDE EMULSION WITHOUT SURFACTANTS

    by Agus Mulyana, Muhammad Fariedz Irawan, Fakhrul Afif Uzair, Dhani Avianto Sugeng, Kurnia Fajar Adhi Sukra, Frendy Rian Saputro, Wira Jazair Yahya, Rizqon Fajar, Boni Sena, Ujiburrahman

    The use of hydrogen peroxide or H2O2 as a fuel additive is known to improve the combustion quality of conventional fuels, including Indonesia’s biodiesel B35. Because H2O2 and B35 do not mix naturally, the H2O2 must be emulsified into B35 to ensure stable fuel delivery and consistent combustion. Conventional emulsification methods typically rely on chemical surfactants, which require a separate preparation step. This study therefore aimed to evaluate the effects of an H2O2–B35 emulsion (HPBE) produced without surfactants on diesel engine performance and emissions. The emulsion was prepared using B35 as the base fuel and 10% (v/v) of 30% aqueous H2O2 as the dispersed phase. Emulsification was carried out using an inline mixer known as the Real-Time Non-Surfactant Emulsion Fuel Supply System (RTES). Engine tests were performed on a Kubota Z482 operating at a constant speed of 2800 rpm under loads of 2.7, 8, 13, 19, and 26 Nm, applied using a Cussons eddy current dynamometer. The parameters measured include Brake Specific Fuel Consumption (BSFC), exhaust gas temperature (EGT) as well as Carbon Monoxide (CO), Carbon Dioxide (CO2), Nitrogen Oxide (NOx) emissions, and smoke opacity. The results showed that, compared to B35, HPBE improved all measured parameters across all loads. BSFC decreased, with the maximum reduction of 22.9% occurring at 8 Nm. At full load, HPBE produced the maximum reductions in smoke opacity (31.3%), CO (29.5%), and CO2 (11.2%). Meanwhile, the maximum NOx reduction of 14.3% was observed at 75% load.

  • Blockchain, Internet of Things, AI, and Smart Factory Synergies for Secure Carbon Trading

    by Muhammad Lukman Baihaqi Alfakihuddin, Tan Kaitlynn Eleanore Poa, Santo Tjhin, Iwan Setiawan, Boni Sena, Joel Nathanael Marsahala, Feby Theresia


  • Open Access

    Empowering society and culinary MSMEs for sustainable development goals initiatives in West Java

    by Nadia Amanah, Boni Sena, Bobie Suhendra, Ardiansyah Yatim, Sheikh Ahmad Zaki

    Purpose: This study aimed to explore the impact of empowering society and culinary MSMEs on Sustainable Development Goals (SDGs) in West Java, focusing on Sindangmukti Village, Karawang Regency. While prior research has often used a top-down approach, neglecting direct societal impact, this study takes a bottom-up perspective, aligning with implicit SDG principles observed in community services. Research Methodology: The study employed online questionnaires with 505 households in West Java to evaluate water consumption, waste generation, and energy usage patterns. Specific investigations in Sindangmukti Village have measured community service effectiveness regarding SDGs. Results: The study found that Only 19.1% of the participants set AC temperatures within the recommended ranges. Additionally, initiatives to promote a sustainable city strategy and establish energy-efficient culinary MSMEs in Sindangmukti Village resulted in a 29% increase in knowledge among 70 participants and generated $36.71 income from bitter melon chip production within two months. Limitations: However, the study focused solely on Sindangmukti Village, neglecting the diverse cultural and problem landscapes of other villages in the Karawang Regency. Contributions: The findings of this study can inform future efforts to enhance energy, water, and waste efficiency in residential buildings in West Java, thereby fostering awareness of energy conservation, environmental sustainability, and economic resilience.


  • Comparative Analysis of Carbon Emission Offsets Across International Offset Programs from 2015 to 2022

    by Muhammad Lukman Baihaqi Alfakihuddin, Ali Rahmat, Iwan Setiawan, Boni Sena, Natasya Angel Holy Winata

  • Open Access

    Effect of Dry Ice Gel PCM on Wall Freezer Temperature Variance

    by Boni Sena, Bobie Suhendra, Nadia Amanah, Reza Setiawan, Muhammad Lukman Baihaqi Alfakihuddin

    The increasing population growth in cities will cause environmental detriments such as global warming and ozone depletion. The electricity need will increase in the future due to the higher temperature in the cities, leading to the higher usage of cooling equipment such as freezers. The current study proposed a method to improve the freezer's energy efficiency by using phase change material of dry ice gel. Most of previous studies only focused on the impact of position of phase change materials on the temperature of wall freezer while no previous studies consider the detailed methodology of measurement and the impact of phase change material based on dry ice gel to the variance of wall temperature. The sensor thermocouple type T and data logger ADAM 6018+ were used to measure the wall temperature of the freezer. The results showed that the sensor thermocouple was verified to the calibrated thermometer with R2 = 0.99. The installation of phase change material based on dry ice gel on the wall freezer could maintain the temperature around 1-2oC while the freezer was turned off for 4, 6, and 8 hours. The efficiency of freezer could be increased from 10% to 30% due to using dry ice gel phase change material. The future study should investigate the various types of phase change materials and the new combination of phase change materials.


  • Open Access

    Pengembangan Desa Berbasis Tujuan Pembangunan Berkelanjutan pada Desa Sindangmukti, Kecamatan Kutawaluya, Kabupaten Karawang

    by Boni Sena, Prety Diawati, Muhammad Lukman Baihaqi Alfakihuddin, Mavianti Mavianti, Tri Sulistyani

    Desa Sindangmukti, Kecamatan Kutawaluya, Kabupaten Karawang, Provinsi Jawa Barat adalah desa yang letak geografisnya berdataran rendah dimana sebagian besar merupakan hamparan sawah sehingga pengembangan sektor pertanian dan perkebunan menjadi prioritas utama. Permasalahan utama pada Desa Sindangmukti berdasarkan diskusi dengan perangkat desa setempat adalah kurangnya jumlah UMKM dan metode pembelajaran yang belum variatif di sekolah. Kegiatan Pengabdian kepada Masyarakat (PkM) telah dilakukan di Desa Sindangmukti dari bulan Juni 2022 hingga bulan November 2022 dengan pendekatan tujuan pembangunan yang berkelanjutan (Sustainable Development Goals) melalui pembentukan UMKM yang memproduksi keripik pare dengan sasaran warga binaan program keluarga harapan sejumlah 7 orang dan meningkatkan kegiatan pembelajaran yang menyenangkan bagi 60 siswa dan siswi di SDN Sindangmukti 1. Metode yang digunakan untuk mencapai tujuan PkM adalah dengan berkoordinasi dengan perangkat desa Sindangmukti untuk menemukan permasalahan yang ada di Desa Sindangmukti, melakukan pelatihan kepada masyarakat, dan mengajar siswa siswi Sekolah Dasar (SD) dengan metode yang menyenangkan. Hasil kegiatan PkM adalah terbentuknya UMKM yang membuat keripik Pariya dan membuat kegiatan pembelajaran yang menyenangkan bagi anak-anak. UMKM yang terbentuk diharapkan dapat meningkatkan perekonomian yang ada di masyarakat, mengurangi terjadinya kekurangan bahan pangan, kehidupan yang sehat dan sejahtera, membuka lapangan kerja, serta mengurangi kesenjangan yang ada pada masyarakat. Hasil yang diharapkan dari metode pembelajaran yang menyenangkan pada anak-anak adalah pendidikan yang berkualitas, kesetaraan gender, serta kerja sama untuk mencapai tujuan bersama. Kesimpulannya adalah permasalahan di Desa Sindangmukti berupa kurangnya jumlah UMKM dan metode pembelajaran yang kurang variatif telah berhasil diselesaikan dengan membentuk UMKM keripik Pariya dan membuat pembelajaran dengan metode yang variatif. Sindangmukti Village, Kutatawaluya District, Karawang Regency, West Java Province, is a village with a low-lying location where most of it is rice fields, so developing the agricultural and plantation sectors is a top priority. The main problem in Sindangmukti Village, based on discussions with local village officials, is the lack of many MSMEs and learning methods that are not yet varied in schools. Community service activities (PkM) have been carried out in Sindangmukti Village from June 2022 to November 2022 with the approach of sustainable development goals (Sustainable Development Goals) through the establishment of MSMEs that produce bitter melon chips with the target of 7 people assisted by the Family Hope program and increasing fun learning activities for 60 students at Sindangmukti 1 Elementary School. The method used to achieve PkM objectives is coordinating with Sindangmukti village officials to find problems in Sindangmukti Village, conduct community training, and teach elementary school students using a pleasant method. The results of PkM activities are the formation of MSMEs that make Pariya chips and learning activities fun for children. MSMEs that are formed are expected to improve the community's economy, reduce food shortages, live a healthy and prosperous life, create jobs, and reduce the gap in society. The expected results of fun learning methods for children are quality education, gender equality, and cooperation to achieve common goals. The conclusion is that the problems in Sindangmukti Village in the form of a lack of SMEs and learning methods that are less varied have been successfully resolved by forming Pariya chips SMEs and making learning using a variety of methods.


  • Open Access

    Modelling, simulation and analysis of 2D steady state conduction, convection and radiation heat transfer of moulding on rubber press machine

    by Boni Sena, Bobie Suhendra, Fauzun Fauzun

    Distribusi transfer kalor yang seragam pada bagian moulding dari mesin rubber press sangat penting untuk menghasilkan hasil moulded produk yang berkualitas terbaik. Pada kenyataannya, transfer kalor pada moulding dari mesin rubber press tidak terdistribusi secara seragam. Oleh karena itu, transfer kalor pada moulding dari mesin perlu dievaluasi. Sebagian besar penelitian sebelumnya hanya mempertimbangkan transfer kalor secara konduksi pada moulding sementara itu tidak ada studi yang menginvestigasi transfer kalor secara konvensi dan radiasi yang hampir terjadi pada seluruh tipe mesin rubber press dengan tipe moulding yang terbuka. Metode elemen hingga digunakan untuk menganalisis distribusi temperatur berdasarkan transfer kalor secara konduksi dan metode analitik dipakai untuk menghitung transfer kalor secara radiasi dan konveksi pada moulding dari mesin rubber press. Hasil dari metode elemen hingga menunjukkan bahwa temperatur tinggi hanya terjadi pada bagian boundary sementara bagian pusat dari moulding menunjukkan temperatur yang lebih rendah. Temperatur pada bagian boundary bervariasi sebesar 124.3 oC, 124.4 oC, 124.5 oC, 124.8, 125.3 oC, 126.5 oC, 129.2 oC, dan 134.8 oC. Transfer kalor secara konveksi dan radiasi pada moulding sebesar 13.3 kW dan 68.23 kW. Perbedaan antara pengukuran langsung dan simulasi menggunakan metode elemen hingga diakibatkan adanya asumsi steady state pada model simulasi. Penelitian selanjutnya sebaiknya mempertimbangkan kondisi transient pada transfer kalor secara konduksi dan view factor yang lebih bervariasi pada transfer kalor secara konveksi dan radiasi.

  • Open Access

    Determinant Factors of Electricity Consumption for a Malaysian Household Based on a Field Survey

    by Boni Sena, Sheikh Ahmad Zaki, Hom Bahadur Rijal, Jorge Alfredo Ardila-Rey, Nelidya Md Yusoff, Fitri Yakub, Mohammad Kholid Ridwan, Firdaus Muhammad-Sukki

    Electricity-saving strategies are an essential solution to overcoming increasing global CO2 emission and electricity consumption problems; therefore, the determinant factors of electricity consumption in households need to be assessed. Most previous studies were conducted in developed countries of subtropical regions that had different household characteristic factors from those in developing countries of tropical regions. A field survey was conducted on electricity consumption for Malaysian households to investigate the factors affecting electricity consumption that focused on technology perspective (building and appliance characteristics) and socio-economic perspective (socio-demographics and occupant behaviour). To analyse the determinant factors of electricity consumption, direct and indirect questionnaire surveys were conducted from November 2017 to January 2018 among 214 university students. Direct questionnaire surveys were performed in order to obtain general information that is easily answered by respondents. On the other hand, some questions such as electricity consumption and detailed information of appliances must be confirmed by the respondents’ parents or other household members through an indirect questionnaire survey. The results from multiple linear regression analyses of the survey responses showed that appliance characteristic factors were the main variables influencing electricity consumption and house characteristics were the least significant. Specifically, air conditioners, fluorescent lamps, and flat-screen TVs emerged as appliances with the most significant effect on electricity consumption. Occupant behaviour factors had a more significant influence than socio-demographic factors. The findings in this study can be used by policymakers to develop electricity-saving strategies in Malaysia.