Zhiwei Zhou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Zhiwei Zhou has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
- Mingde Shen
State Key Laboratory of Frozen Soil Engineering, Northwest Institute of Eco-Environment and Resources, Chinese Academy of Sciences, Lanzhou, People’s Republic of China
3 shared publications - Wei Ma
State Key Laboratory of Cryospheric Science and Frozen Soil Engineering, Northwest Institute of Eco-Environment and Resources, Chinese Academy of Sciences, Lanzhou 730000, China
3 shared publications - Dun Chen
State Key Laboratory of Cryospheric Science and Frozen Soil Engineering, Northwest Institute of Eco-Environment and Resources, Chinese Academy of Sciences, Lanzhou 730000, China
2 shared publications - Guoyu Li
State Key Laboratory of Cryospheric Science and Frozen Soil Engineering, Northwest Institute of Eco-Environment and Resources, Chinese Academy of Sciences, Lanzhou 730000, China
2 shared publications - Yanhu Mu
State Key Laboratory of Cryospheric Science and Frozen Soil Engineering, Northwest Institute of Eco-Environment and Resources, Chinese Academy of Sciences, Lanzhou 730000, China
2 shared publications - Anatoli Brouchkov
Moscow State University, Moscow, Russia
1 shared publication
Latest Publications
- Open Access
Study on Acoustic–Electric Response Characteristics of Unsaturated Loess under Different Moisture Content
In order to study the characteristics of P-wave velocity and resistivity of loess with different moisture contents, low-field nuclear magnetic resonance, resistivity, and P-wave velocity tests were carried out on loess samples with 11 different moisture contents. The test results show that under the condition of the same dry density, the water in loess exists in two forms: bound water and free water. With the increase in moisture content, the water porosity of loess increases, the proportion of free water increases, and the resistivity gradually decreases and then tends to be stable, showing a power function relationship with moisture content. When the moisture content is less than 20%, the P-wave velocity decreases with the increase in the moisture content. In comparison, when the moisture content is greater than 20%, the wave velocity increases with the increase in the moisture content. A modified relation between wave velocity and moisture content and saturation is put forward, and the relationship expression between wave velocity and resistivity of loess is established. Finally, the reliability is verified by experimental data. The research results have a certain guiding significance for real-time monitoring of loess moisture content and engineering stability analysis in the loess area.
Open AccessStudy on Acoustic–Electric Response Characteristics of Unsaturated Loess under Different Moisture Content
In order to study the characteristics of P-wave velocity and resistivity of loess with different moisture contents, low-field nuclear magnetic resonance, resistivity, and P-wave velocity tests were carried out on loess samples with 11 different moisture contents. The test results show that under the condition of the same dry density, the water in loess exists in two forms: bound water and free water. With the increase in moisture content, the water porosity of loess increases, the proportion of free water increases, and the resistivity gradually decreases and then tends to be stable, showing a power function relationship with moisture content. When the moisture content is less than 20%, the P-wave velocity decreases with the increase in the moisture content. In comparison, when the moisture content is greater than 20%, the wave velocity increases with the increase in the moisture content. A modified relation between wave velocity and moisture content and saturation is put forward, and the relationship expression between wave velocity and resistivity of loess is established. Finally, the reliability is verified by experimental data. The research results have a certain guiding significance for real-time monitoring of loess moisture content and engineering stability analysis in the loess area.
- 23 May 2023
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 56 (8) , 5833-5859
Experimental and Theoretical Investigation on the Unloading Creep Behaviors of Frozen Soil
- 23 May 2023
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 56 (8) , 5833-5859
Experimental and Theoretical Investigation on the Unloading Creep Behaviors of Frozen Soil
- Open Access
Experimental Study on the Rheology and Cryo-Mechanism of Pile-Frozen Soil Interface
The rheological behavior of a pile-frozen soil interface can accelerate pile settlement in pile foundation engineering and deteriorate the bearing capacity of the pile in cold regions. This is the core basis for guiding the design of pile engineering and judging the service life of pile foundations. However, it is unclear how the rheological process is affected by the factors which determine the ad-freeze strength at the pile-frozen soil interface. In this paper, based on a series of Multistage Loading Creep Test (MLCT) for pile-frozen Qinghai-Tibet clay soil interface and microscopic observations of frozen soil, the rheological process and the cryo-mechanism of the interface were analyzed. The results showed that the decrease in soil temperature reduce the interface’s instantaneous deformation value and creep rate, which results from the temperature-dependent rheological behavior of ice. The trend also occurs in the soil with coarser particles and the pile with a rough surface. The presence of massive ice in frozen soil benefits the bearing capacity of the interface at a high temperature of -1°C. However, it can considerably increase the interface’s creep rate due to the influence of the rheological properties of ice at a relatively low temperature of -5°C. Either thick lenticular ice lens or chaotic reticulate cryo-structures in the frozen soil surrounding a pile will enhance the interface’s rheological properties. The interface exhibits the lowest instantaneous deformation value and the slowest creep rate for frozen soil with the massive cryo-structure, which is formed with optimum moisture content. From an engineering viewpoint, the settlement of a pile foundation can be reduced by controlling its instantaneous deformation or restraining its creep rate.
Open AccessExperimental Study on the Rheology and Cryo-Mechanism of Pile-Frozen Soil Interface
The rheological behavior of a pile-frozen soil interface can accelerate pile settlement in pile foundation engineering and deteriorate the bearing capacity of the pile in cold regions. This is the core basis for guiding the design of pile engineering and judging the service life of pile foundations. However, it is unclear how the rheological process is affected by the factors which determine the ad-freeze strength at the pile-frozen soil interface. In this paper, based on a series of Multistage Loading Creep Test (MLCT) for pile-frozen Qinghai-Tibet clay soil interface and microscopic observations of frozen soil, the rheological process and the cryo-mechanism of the interface were analyzed. The results showed that the decrease in soil temperature reduce the interface’s instantaneous deformation value and creep rate, which results from the temperature-dependent rheological behavior of ice. The trend also occurs in the soil with coarser particles and the pile with a rough surface. The presence of massive ice in frozen soil benefits the bearing capacity of the interface at a high temperature of -1°C. However, it can considerably increase the interface’s creep rate due to the influence of the rheological properties of ice at a relatively low temperature of -5°C. Either thick lenticular ice lens or chaotic reticulate cryo-structures in the frozen soil surrounding a pile will enhance the interface’s rheological properties. The interface exhibits the lowest instantaneous deformation value and the slowest creep rate for frozen soil with the massive cryo-structure, which is formed with optimum moisture content. From an engineering viewpoint, the settlement of a pile foundation can be reduced by controlling its instantaneous deformation or restraining its creep rate.
- Open Access
Experimental Study on the Anisotropy and Non-coaxiality of Frozen Standard Sand under Different Principal Stress Directions
Owing to the limitations of the apparatus, the influence of its principal stress direction on the anisotropic behavior and non-coaxiality of frozen soil has not been fully considered in previous studies. At a temperature of -10°C, a series of hollow cylinder tests for frozen standard sand (FSS) was conducted under different directional angles of major principal stress and mean principal stresses in this study. The experimental results indicate that the stress-strain-strength anisotropy and non-coaxiality of the FSS are highly dependent on the principal stress direction. The stress components of the FSS vary linearly with increasing shear stress at different directional angles of the major principal stress and mean principal stresses. With a linear increase in shear stress, the strain components of the FSS exhibited a nonlinear increasing trend. The FSS strength gradually decreased as the directional angle of the major principal stress and the mean principal stresses in the test range increased. Under the different principal stress directions, the non-coaxiality of the FSS, non-coincidence of the direction of the principal strain increment and the principal stress direction, were observed. The directions of the principal strain increment and principal stress gradually tended to be coaxial as shear stress increased. Although the non-coaxial angle of the FSS increased gradually with an increase in the directional angles of the major principal stress, it did not change with the change in the mean principal stress. The non-coaxial angle of the FSS was observed to be as large as 35° in the early stage of shearing under different mean principal stresses.
Open AccessExperimental Study on the Anisotropy and Non-coaxiality of Frozen Standard Sand under Different Principal Stress Directions
Owing to the limitations of the apparatus, the influence of its principal stress direction on the anisotropic behavior and non-coaxiality of frozen soil has not been fully considered in previous studies. At a temperature of -10°C, a series of hollow cylinder tests for frozen standard sand (FSS) was conducted under different directional angles of major principal stress and mean principal stresses in this study. The experimental results indicate that the stress-strain-strength anisotropy and non-coaxiality of the FSS are highly dependent on the principal stress direction. The stress components of the FSS vary linearly with increasing shear stress at different directional angles of the major principal stress and mean principal stresses. With a linear increase in shear stress, the strain components of the FSS exhibited a nonlinear increasing trend. The FSS strength gradually decreased as the directional angle of the major principal stress and the mean principal stresses in the test range increased. Under the different principal stress directions, the non-coaxiality of the FSS, non-coincidence of the direction of the principal strain increment and the principal stress direction, were observed. The directions of the principal strain increment and principal stress gradually tended to be coaxial as shear stress increased. Although the non-coaxial angle of the FSS increased gradually with an increase in the directional angles of the major principal stress, it did not change with the change in the mean principal stress. The non-coaxial angle of the FSS was observed to be as large as 35° in the early stage of shearing under different mean principal stresses.
- 28 March 2022
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 24 (4) , 935-959
Critical dynamic stress for the frozen subgrade soil
Triaxial dynamic tests at the temperature −6 °C were performed on frozen subgrade soil to study accumulative deformation and resilient deformation properties. Based on the shakedown theory, a reliable evaluation for the long-term serviceability of the frozen subgrade was further presented. The influences of confining pressure, dynamic stress amplitude, initial stress path and initial stress ratio on dynamic properties of frozen subgrade soil were analysed. The evolution features of accumulative permanent strain under cyclic loading were experimentally determinated. The boundary functions for plastic shakedown area and plastic creep area were further established. Critical dynamic stresses for the different deformation areas can be calculated by the experimental data and the proposal formula. The influences of consolidation pressure and initial stress ratio on critical dynamic stress were discussed in detail. The distribution characteristics (envelope line loci) of the critical dynamic stress were investigated in the mean stress-the shear stress space.
- 28 March 2022
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 24 (4) , 935-959
Critical dynamic stress for the frozen subgrade soil
Triaxial dynamic tests at the temperature −6 °C were performed on frozen subgrade soil to study accumulative deformation and resilient deformation properties. Based on the shakedown theory, a reliable evaluation for the long-term serviceability of the frozen subgrade was further presented. The influences of confining pressure, dynamic stress amplitude, initial stress path and initial stress ratio on dynamic properties of frozen subgrade soil were analysed. The evolution features of accumulative permanent strain under cyclic loading were experimentally determinated. The boundary functions for plastic shakedown area and plastic creep area were further established. Critical dynamic stresses for the different deformation areas can be calculated by the experimental data and the proposal formula. The influences of consolidation pressure and initial stress ratio on critical dynamic stress were discussed in detail. The distribution characteristics (envelope line loci) of the critical dynamic stress were investigated in the mean stress-the shear stress space.
- 11 January 2021
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 23 (5) , 1061-1090
Effect of stress path on mechanical behaviours of frozen subgrade soil
This paper presents a systematical investigation on the mechanical behaviours of frozen subgrade soil under various stress paths. A series of triaxial compression tests under six typical linear stress paths were conducted on artificially saturated frozen samples at a temperature of −6.0 °C by using triaxial low-temperature apparatus (MTS-810). The effects of stress path on mechanical behaviours such as stress–strain (axial and volumetric strain) relationship, failure strength surface, initial stiffness, cohesion and friction angle of frozen sample were analysed and discussed, respectively. The experimental results show that the evolution law of volumetric strain, equivalent cohesion, friction angle and initial stiffness are significantly affected by the stress paths. The plastic deformation stages in stress–strain curves are influenced by the stress paths. The shape and size of experimental failure surface for frozen soil in deviator-mean stress space is not sensitive to the stress paths, but the mean stress at the peak point decreases with the increase of loading angle. Finally, a new nonlinear strength criterion, considering the stress path effect and ‘three stage’ distribution characteristics, is proposed to predict the experimental strength surface of frozen subgrade soil. This failure criterion is capable of giving a good description for the multiaxial failure characteristics of frozen soil in a wide range of loading angles.
- 11 January 2021
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 23 (5) , 1061-1090
Effect of stress path on mechanical behaviours of frozen subgrade soil
This paper presents a systematical investigation on the mechanical behaviours of frozen subgrade soil under various stress paths. A series of triaxial compression tests under six typical linear stress paths were conducted on artificially saturated frozen samples at a temperature of −6.0 °C by using triaxial low-temperature apparatus (MTS-810). The effects of stress path on mechanical behaviours such as stress–strain (axial and volumetric strain) relationship, failure strength surface, initial stiffness, cohesion and friction angle of frozen sample were analysed and discussed, respectively. The experimental results show that the evolution law of volumetric strain, equivalent cohesion, friction angle and initial stiffness are significantly affected by the stress paths. The plastic deformation stages in stress–strain curves are influenced by the stress paths. The shape and size of experimental failure surface for frozen soil in deviator-mean stress space is not sensitive to the stress paths, but the mean stress at the peak point decreases with the increase of loading angle. Finally, a new nonlinear strength criterion, considering the stress path effect and ‘three stage’ distribution characteristics, is proposed to predict the experimental strength surface of frozen subgrade soil. This failure criterion is capable of giving a good description for the multiaxial failure characteristics of frozen soil in a wide range of loading angles.
- Open Access
- 31 October 2020
- Published by MDPI AG in Remote Sensing
- Vol. 12 (21) , 3576
Assessment of Freeze–Thaw Hazards and Water Features along the China–Russia Crude Oil Pipeline in Permafrost Regions
The China–Russia crude oil pipeline (CRCOP) traverses rivers, forests, and mountains over permafrost regions in northeastern China. Water accumulates beside the pipe embankment, which disturbs the hydrothermal balance of permafrost underlying the pipeline. Ground surface flows along the pipeline erode the pipe embankment, which threatens the CRCOP’s operational safety. Additionally, frost heave and thaw settlement can induce differential deformation of the pipes. Therefore, it is necessary to acquire the spatial distribution of water features along the CRCOP, and analyze the various hazard probabilities and their controlling factors. In this paper, information regarding the permafrost type, buried depth of the pipe, soil type, landforms, and vegetation were collected along the CRCOP every 2 km. Ponding and erosive damage caused by surface flows were measured via field investigations and remote sensing images. Two hundred and sixty-four pond sites were extracted from Landsat 8 images, in which the areas of 46.8% of the ponds were larger than 500 m2. Several influential factors related to freeze–thaw hazards and erosive damage were selected and put into a logistic regression model to determine their corresponding risk probabilities. The results reflected the distributions, and forecasted the occurrences, of freeze–thaw hazards and erosive damage. The sections of pipe with the highest risks of freeze–thaw and erosive damage accounted for 2.4% and 6.7%, respectively, of the pipeline. Permafrost type and the position where runoff encounters the pipeline were the dominant influences on the freeze–thaw hazards, while the runoff–pipe position, buried depth of the pipe, and landform types played a dominant role in erosive damage along the CRCOP. Combined with the geographic information system (GIS), field surveys, image interpretation and model calculations are effective methods for assessing the various hazards along the CRCOP in permafrost regions.
- 31 October 2020
- Published by MDPI AG in Remote Sensing
- Vol. 12 (21) , 3576
Open AccessAssessment of Freeze–Thaw Hazards and Water Features along the China–Russia Crude Oil Pipeline in Permafrost Regions
The China–Russia crude oil pipeline (CRCOP) traverses rivers, forests, and mountains over permafrost regions in northeastern China. Water accumulates beside the pipe embankment, which disturbs the hydrothermal balance of permafrost underlying the pipeline. Ground surface flows along the pipeline erode the pipe embankment, which threatens the CRCOP’s operational safety. Additionally, frost heave and thaw settlement can induce differential deformation of the pipes. Therefore, it is necessary to acquire the spatial distribution of water features along the CRCOP, and analyze the various hazard probabilities and their controlling factors. In this paper, information regarding the permafrost type, buried depth of the pipe, soil type, landforms, and vegetation were collected along the CRCOP every 2 km. Ponding and erosive damage caused by surface flows were measured via field investigations and remote sensing images. Two hundred and sixty-four pond sites were extracted from Landsat 8 images, in which the areas of 46.8% of the ponds were larger than 500 m2. Several influential factors related to freeze–thaw hazards and erosive damage were selected and put into a logistic regression model to determine their corresponding risk probabilities. The results reflected the distributions, and forecasted the occurrences, of freeze–thaw hazards and erosive damage. The sections of pipe with the highest risks of freeze–thaw and erosive damage accounted for 2.4% and 6.7%, respectively, of the pipeline. Permafrost type and the position where runoff encounters the pipeline were the dominant influences on the freeze–thaw hazards, while the runoff–pipe position, buried depth of the pipe, and landform types played a dominant role in erosive damage along the CRCOP. Combined with the geographic information system (GIS), field surveys, image interpretation and model calculations are effective methods for assessing the various hazards along the CRCOP in permafrost regions.
- 1 July 2015
- Published by Springer Nature in Journal of Mountain Science
- Vol. 12 (4) , 999-1009
Effects of freeze-thaw cycles on soil mechanical and physical properties in the Qinghai-Tibet Plateau
- 1 July 2015
- Published by Springer Nature in Journal of Mountain Science
- Vol. 12 (4) , 999-1009
Effects of freeze-thaw cycles on soil mechanical and physical properties in the Qinghai-Tibet Plateau