Man Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Man Chen has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
Chengqian Jin
3 shared publications- Chengqian Jin
Nanjing Institute of Agricultural Mechanization, Ministry of Agriculture and Rural affairs, Nanjing, China
3 shared publications - Gong Cheng
Nanjing Institute of Agricultural Mechanization, Ministry of Agriculture and Rural affairs, Nanjing, China
2 shared publications Jinshan Xu
Ministry of Agriculture and Rural Affairs, China
2 shared publications- Chengqian Jin
Nanjing Institute of Agricultural Mechanization, Ministry of Agriculture and Rural Affairs, Nanjing, Jiangsu / China
1 shared publication Gangwei Liu
Ministry of Agriculture and Rural Affairs, China
1 shared publication
Latest Publications
- Open Access
- 24 December 2025
- Published by Elsevier in Smart Agricultural Technology
- Vol. 13
Detection method of broken grains and impurities in harvested soybeans using feature wavelength selection and MobileNetV4-Unet-SGCPNet hybrid network
- 24 December 2025
- Published by Elsevier in Smart Agricultural Technology
- Vol. 13
Open AccessDetection method of broken grains and impurities in harvested soybeans using feature wavelength selection and MobileNetV4-Unet-SGCPNet hybrid network
- Open Access
- 8 January 2024
- Published by SAGE Publications in Science Progress
- Vol. 107 (1)
DeeplabV3+-based navigation line extraction for the sunlight robust combine harvester
Visual navigation is widely used in intelligent combine harvesters, but the existing algorithms do not have sufficiently high accuracy of the visual navigation line recognition under different sunlight conditions. To address this problem, this article proposes a sunlight-robust DeepLabV3+-based navigation line extraction method for combine harvesters. The navigation lines are extracted by constructing a new dataset and predicting the boundaries of the areas that have been and have not been cut. To address the problem that DeeplabV3+ is not sufficient light in the DCNN part, improvement is proposed by incorporating the MobileNetV2 module. In image segmentation, the prediction time is 22.5 ms, and the mean intersection over union ( FMIOU) is 0.79. After image segmentation, the navigation lines are drawn using the line segment detection algorithm for the harvester. The proposed method is compared with other mainstream networks, and the prediction results are compared using the line segment detection method. The results show that this method can more quickly identify the navigation lines under different conditions of sunlight with less labeled data than the improved U-Net and DeeplabV3+, which uses Xception as the backbone. Compared to the traditional method and the improved U-Net, this method achieves good results and improves the recognition speed by 27 and 9 ms, respectively.
- 8 January 2024
- Published by SAGE Publications in Science Progress
- Vol. 107 (1)
Open AccessDeeplabV3+-based navigation line extraction for the sunlight robust combine harvester
Visual navigation is widely used in intelligent combine harvesters, but the existing algorithms do not have sufficiently high accuracy of the visual navigation line recognition under different sunlight conditions. To address this problem, this article proposes a sunlight-robust DeepLabV3+-based navigation line extraction method for combine harvesters. The navigation lines are extracted by constructing a new dataset and predicting the boundaries of the areas that have been and have not been cut. To address the problem that DeeplabV3+ is not sufficient light in the DCNN part, improvement is proposed by incorporating the MobileNetV2 module. In image segmentation, the prediction time is 22.5 ms, and the mean intersection over union ( FMIOU) is 0.79. After image segmentation, the navigation lines are drawn using the line segment detection algorithm for the harvester. The proposed method is compared with other mainstream networks, and the prediction results are compared using the line segment detection method. The results show that this method can more quickly identify the navigation lines under different conditions of sunlight with less labeled data than the improved U-Net and DeeplabV3+, which uses Xception as the backbone. Compared to the traditional method and the improved U-Net, this method achieves good results and improves the recognition speed by 27 and 9 ms, respectively.
- Open Access
- 25 August 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (17) , 12852
A Real-Time Measurement Method and System for the Harvesting Area of a Grain Combine Harvester
A real-time system for measuring harvesting area is crucial for cross-regional operation. In response to the current situation where significant errors often occur in measuring the areas of small and irregular fields, we designed a low-cost and high-precision online real-time measurement system for the harvesting area of grain combines. The real-time measurement hardware system for measuring area was designed using an STM32 microcontroller as the core unit. The system was developed using three modes: intelligent measurement, circular measurement, and fusion measurement. Simulation and field experiments were conducted to verify the performance of the system. The experimental results showed that in the field simulation experiment with four differently shaped operating areas, the average accuracy of the intelligent mode reached 93.76%, and the average accuracy of the circular mode reached 95.48%. In the field experiments, the average accuracy of the intelligent mode reached 95.09%, the average accuracy of the circular mode reached 95.74%, and the average accuracy of the fusion measurement mode reached 98.01%. Therefore, the real-time measurement system for the harvesting area of a grain combine harvester designed in this study has high accuracy when measuring the area of small and irregular farmland, hence meeting the requirements of the design objectives.
- 25 August 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (17) , 12852
Open AccessA Real-Time Measurement Method and System for the Harvesting Area of a Grain Combine Harvester
A real-time system for measuring harvesting area is crucial for cross-regional operation. In response to the current situation where significant errors often occur in measuring the areas of small and irregular fields, we designed a low-cost and high-precision online real-time measurement system for the harvesting area of grain combines. The real-time measurement hardware system for measuring area was designed using an STM32 microcontroller as the core unit. The system was developed using three modes: intelligent measurement, circular measurement, and fusion measurement. Simulation and field experiments were conducted to verify the performance of the system. The experimental results showed that in the field simulation experiment with four differently shaped operating areas, the average accuracy of the intelligent mode reached 93.76%, and the average accuracy of the circular mode reached 95.48%. In the field experiments, the average accuracy of the intelligent mode reached 95.09%, the average accuracy of the circular mode reached 95.74%, and the average accuracy of the fusion measurement mode reached 98.01%. Therefore, the real-time measurement system for the harvesting area of a grain combine harvester designed in this study has high accuracy when measuring the area of small and irregular farmland, hence meeting the requirements of the design objectives.
- Open Access
- 1 January 2023
- Published by FapUNIFESP (SciELO) in Food Science and Technology
- Vol. 43
Soybean crushing forms by mechanical harvesting and factors affecting the proportions of different forms
- 1 January 2023
- Published by FapUNIFESP (SciELO) in Food Science and Technology
- Vol. 43
Open AccessSoybean crushing forms by mechanical harvesting and factors affecting the proportions of different forms
- Open Access
Online Detection System for Wheat Machine Harvesting Impurity Rate Based on DeepLabV3+
Wheat, one of the most important food crops in the world, is usually harvested mechanically by combine harvesters. The impurity rate is one of the most important indicators of the quality of wheat obtained by mechanized harvesting. To realize the online detection of the impurity rate in the mechanized harvesting process of wheat, a vision system based on the DeepLabV3+ model of deep learning for identifying and segmenting wheat grains and impurities was designed in this study. The DeepLabV3+ model construction considered the four backbones of MobileNetV2, Xception-65, ResNet-50, and ResNet-101 for training. The optimal DeepLabV3+ model was determined through the accuracy rate, comprehensive evaluation index, and average intersection ratio. On this basis, an online detection method of measuring the wheat impurity rate in mechanized harvesting based on image information was constructed. The model realized the online detection of the wheat impurity rate. The test results showed that ResNet-50 had the best recognition and segmentation performance; the accuracy rate of grain identification was 86.86%; the comprehensive evaluation index was 83.63%; the intersection ratio was 0.7186; the accuracy rate of impurity identification was 89.91%; the comprehensive evaluation index was 87.18%; the intersection ratio was 0.7717; and the average intersection ratio was 0.7457. In terms of speed, ResNet-50 had a fast segmentation speed of 256 ms per image. Therefore, in this study, ResNet-50 was selected as the backbone network for DeepLabV3+ to carry out the identification and segmentation of mechanically harvested wheat grains and impurity components. Based on the manual inspection results, the maximum absolute error of the device impurity rate detection in the bench test was 0.2%, and the largest relative error was 17.34%; the maximum absolute error of the device impurity rate detection in the field test was 0.06%; and the largest relative error was 13.78%. This study provides a real-time method for impurity rate measurement in wheat mechanized harvesting.
Open AccessOnline Detection System for Wheat Machine Harvesting Impurity Rate Based on DeepLabV3+
Wheat, one of the most important food crops in the world, is usually harvested mechanically by combine harvesters. The impurity rate is one of the most important indicators of the quality of wheat obtained by mechanized harvesting. To realize the online detection of the impurity rate in the mechanized harvesting process of wheat, a vision system based on the DeepLabV3+ model of deep learning for identifying and segmenting wheat grains and impurities was designed in this study. The DeepLabV3+ model construction considered the four backbones of MobileNetV2, Xception-65, ResNet-50, and ResNet-101 for training. The optimal DeepLabV3+ model was determined through the accuracy rate, comprehensive evaluation index, and average intersection ratio. On this basis, an online detection method of measuring the wheat impurity rate in mechanized harvesting based on image information was constructed. The model realized the online detection of the wheat impurity rate. The test results showed that ResNet-50 had the best recognition and segmentation performance; the accuracy rate of grain identification was 86.86%; the comprehensive evaluation index was 83.63%; the intersection ratio was 0.7186; the accuracy rate of impurity identification was 89.91%; the comprehensive evaluation index was 87.18%; the intersection ratio was 0.7717; and the average intersection ratio was 0.7457. In terms of speed, ResNet-50 had a fast segmentation speed of 256 ms per image. Therefore, in this study, ResNet-50 was selected as the backbone network for DeepLabV3+ to carry out the identification and segmentation of mechanically harvested wheat grains and impurity components. Based on the manual inspection results, the maximum absolute error of the device impurity rate detection in the bench test was 0.2%, and the largest relative error was 17.34%; the maximum absolute error of the device impurity rate detection in the field test was 0.06%; and the largest relative error was 13.78%. This study provides a real-time method for impurity rate measurement in wheat mechanized harvesting.
- Open Access
- 1 April 2022
- Published by SAGE Publications in Science Progress
- Vol. 105 (2)
Semantic segmentation-based mechanized harvesting soybean quality detection
Crushing rate and impurity rate are important quality indicators of mechanically harvested soybeans. Intelligent quality detection of mechanically harvested soybeans based on machine vision is of great significance to evaluate soybean quality accurately and rapidly. This study proposes an improved U-Net method for identifying intact soybean grains, crushing soybean grains, and impurities. Based on the accurate identification of soybean components and using the quantitative model of soybean crushing rate and impurity rate, the quality of soybean samples can be detected in real-time. To this end, a soybean quality inspection system is designed to realize the dynamic collection and detection of soybean samples. The test results show that the comprehensive evaluation index values of the improved U-Net segmentation algorithm in identifying intact soybean grains, crushing soybean grains, and impurities are 93.04%, 89.40%, and 96.49%, respectively. Compared with the traditional U-Net model, the performance of the indicators is improved by 3.23%, 0.17% and 0.72%, respectively. Compared with manual detection, the maximum absolute error of the crushing rate detection of the soybean quality detection system is 0.57%, and the maximum absolute error of the impurity rate detection is 0.69%. The proposed soybean quality inspection system can be used as an effective tool for real-time online inspection of soybean quality.
- 1 April 2022
- Published by SAGE Publications in Science Progress
- Vol. 105 (2)
Open AccessSemantic segmentation-based mechanized harvesting soybean quality detection
Crushing rate and impurity rate are important quality indicators of mechanically harvested soybeans. Intelligent quality detection of mechanically harvested soybeans based on machine vision is of great significance to evaluate soybean quality accurately and rapidly. This study proposes an improved U-Net method for identifying intact soybean grains, crushing soybean grains, and impurities. Based on the accurate identification of soybean components and using the quantitative model of soybean crushing rate and impurity rate, the quality of soybean samples can be detected in real-time. To this end, a soybean quality inspection system is designed to realize the dynamic collection and detection of soybean samples. The test results show that the comprehensive evaluation index values of the improved U-Net segmentation algorithm in identifying intact soybean grains, crushing soybean grains, and impurities are 93.04%, 89.40%, and 96.49%, respectively. Compared with the traditional U-Net model, the performance of the indicators is improved by 3.23%, 0.17% and 0.72%, respectively. Compared with manual detection, the maximum absolute error of the crushing rate detection of the soybean quality detection system is 0.57%, and the maximum absolute error of the impurity rate detection is 0.69%. The proposed soybean quality inspection system can be used as an effective tool for real-time online inspection of soybean quality.
- Open Access
- 1 January 2022
- Published by FapUNIFESP (SciELO) in Food Science and Technology
- Vol. 42
Spectral inversion model of the crushing rate of soybean under mechanized harvesting
- 1 January 2022
- Published by FapUNIFESP (SciELO) in Food Science and Technology
- Vol. 42
Open AccessSpectral inversion model of the crushing rate of soybean under mechanized harvesting
- Open Access
- 1 January 2018
- Published by International Journal of Agricultural and Biological Engineering (IJABE) in International Journal of Agricultural and Biological Engineering
- Vol. 11 (6) , 152-158
Response characteristics and efficiency of variable rate fertilization based on spectral reflectance
The key technical problem of variable rate fertilization system based on spectrum information was precise variable fertilization in certain area according to the acquired spectrum information. Hysteretic fertilizing is a critical problem in most of current fertilizer equipment. Hysteresis model was built and analyzed in this study to improve the system. Fertilizing tests were conducted on different wheat breeds and the results were analyzed. The tests showed that variable rate fertilization had obvious hysteresis phenomenon with the maximum lag distance of 3.82 m, the minimum lag distance of 1.73 m and average of 3.06 m. Hysteresis phenomenon of the variable rate fertilization system was obviously decreased when implanting a correction time of 2.04 s with the maximum lag distance of 0.61 m. Variable effects varied by different wheat breeds. Variable rate fertilization had an advantage of improving spatial differences of Yangmai-23, and the spatial variability of which decreased by 14.23%. In the small test area, the amount of fertilizer in Zhenmai-168 decreased by 2.84 kg, while the amount of which in Yangmai-23 increased by 3.83 kg. Yield of Zhenmai-168 in small area was lower than that in traditional pattern, but the condition of Yangmai-23 was on the contrary. Valuable information for increasing performance of fertilization in variable rate fertilization system was provided in this paper. Keywords: variable rate fertilization, fertilization lag, calibration, fertilization efficiency, winter wheat DOI: 10.25165/j.ijabe.20181106.4086 Citation: Chen M, Yang Z J, Wang X C, Shi Y Y, Zhang Y. Response characteristics and efficiency of variable rate fertilization based on spectral reflectance. Int J Agric & Biol Eng, 2018; 11(6): 152–158.
- 1 January 2018
- Published by International Journal of Agricultural and Biological Engineering (IJABE) in International Journal of Agricultural and Biological Engineering
- Vol. 11 (6) , 152-158
Open AccessResponse characteristics and efficiency of variable rate fertilization based on spectral reflectance
The key technical problem of variable rate fertilization system based on spectrum information was precise variable fertilization in certain area according to the acquired spectrum information. Hysteretic fertilizing is a critical problem in most of current fertilizer equipment. Hysteresis model was built and analyzed in this study to improve the system. Fertilizing tests were conducted on different wheat breeds and the results were analyzed. The tests showed that variable rate fertilization had obvious hysteresis phenomenon with the maximum lag distance of 3.82 m, the minimum lag distance of 1.73 m and average of 3.06 m. Hysteresis phenomenon of the variable rate fertilization system was obviously decreased when implanting a correction time of 2.04 s with the maximum lag distance of 0.61 m. Variable effects varied by different wheat breeds. Variable rate fertilization had an advantage of improving spatial differences of Yangmai-23, and the spatial variability of which decreased by 14.23%. In the small test area, the amount of fertilizer in Zhenmai-168 decreased by 2.84 kg, while the amount of which in Yangmai-23 increased by 3.83 kg. Yield of Zhenmai-168 in small area was lower than that in traditional pattern, but the condition of Yangmai-23 was on the contrary. Valuable information for increasing performance of fertilization in variable rate fertilization system was provided in this paper. Keywords: variable rate fertilization, fertilization lag, calibration, fertilization efficiency, winter wheat DOI: 10.25165/j.ijabe.20181106.4086 Citation: Chen M, Yang Z J, Wang X C, Shi Y Y, Zhang Y. Response characteristics and efficiency of variable rate fertilization based on spectral reflectance. Int J Agric & Biol Eng, 2018; 11(6): 152–158.