BYBoris A. Yakimovich

Boris A. Yakimovich

*This is an algorithmically generated author record based on publicly available information.

Boris A. Yakimovich has a total of 32 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Safe Integration of Energy-Efficient Unmanned Aerial Vehicles

    by Zuzana Ságová, Ivana Klačková, Leonid Y. Yuferev, Vladimir V. Kuvshinov, Boris A. Yakimovich, Oleg V. Maschev, Ivan Zajačko

  • Using trigeneration systems to increase energy efficiency and sustainability of computing complexes

    by Elena G. Kakushina, Boris A. Yakimovich, Nikolay M. Shaitor

    The article discusses the theoretical and practical aspects of the application of trigeneration systems integrated with renewable energy sources intended for the power supply of data centers and other computing complexes. The purpose of the study is to substantiate the technical, energy and economic feasibility of using solar trigeneration systems to increase energy efficiency and sustainability of computing complexes. Using the example of an autonomous facility in Crimea, the possibility of simultaneous generation of electricity, heat and cold using solar photovoltaic panels, vacuum solar collectors and an absorption refrigerating machine is demonstrated. Research objectives: development of a mathematical model of a trigeneration system; assessment of the energy balance taking into account seasonal variability; determination of the optimal configuration of equipment; technical and economic analysis. Research methods: modeling of a photovoltaic subsystem, vacuum solar collectors, absorption bromistolithium refrigerating machine based on energy flow balance equations; calculation of payback period, internal rate of return, capital and operating costs. The article substantiates the expediency of introducing such systems in the southern regions of Russia and other territories with high levels of solar insolation. The key advantage of the described approach is the synergetic effect. The excess electricity from the photovoltaic panels is directed to an absorption machine that produces cold for air conditioning server rooms, which is critical for their operation. Thermal energy from solar collectors is used to cover household needs and maintain temperature conditions during the off-season. The intelligent control system ensures the priority use of "green" energy, and redundancy due to traditional networks is minimized. This allows not only to achieve a high degree of energy independence, but also to significantly reduce the carbon footprint of the facility. The results obtained: the integration of solar installations with an absorption lithium bromide refrigerating machine made it possible to reduce thermal energy losses by 66.1%, generate 8.2 MWh of cold per year, increase the autonomy of the facility from 68% to 89%, achieve a payback period of 4.3 years and an internal rate of return of 18.5%. Thus, the proposed solution is technologically and economically efficient, contributing to the sustainable development of energy-intensive digital infrastructures.

  • The Concept of Change Management in the Marketing Activities of Enterprises

    by T.A. Berkutova, T.N. Ivanova, B.A. Yakimovich

    In the context of the formation of technological independence of Russia, the most important task is to ensure the market orientation of the production capabilities of domestic enterprises of the military-industrial complex. Possessing significant scientific, technological, production and personnel potential, they are capable of implementing large-scale goals for the production of high-tech civilian and dual-purpose products aimed at achieving the goals of import substitution and overcoming the sanctions regime against the Russian Federation. Without transformations in marketing activities at enterprises of the military-industrial complex, it is impossible to solve the set strategic tasks, which makes the task of change management relevant in terms of practical use. The article presents the proposed concept of managing changes in the marketing activities of enterprises. The author's interpretation of change management in the marketing activities of enterprises is proposed. The concept of "resource potential of change management in the marketing activities of enterprises" is introduced. The areas of change in marketing activities are defined. The principles of change management in marketing activities are formulated. The proposed change management concept takes into account the main components necessary to identify and implement effective changes, the targeted nature of marketing and business changes, coverage of all levels of marketing activities; and the relationship with the internal and external environment of an enterprise.

  • Open Access

    Stochastic Diagnostics of Tool and Workpiece Interaction

    by Sergey Bratan, Milan Sága, Boris Yakimovich, Pavol Božek, Nikolay Pokintelista, Chingiz Yakubov

    Development is an integral part of research, since the study of specifics and characteristics in such a unique topic as the quality of processed products cannot be done without extraordinary equipment, fixtures and a laboratory. Laboratory equipment has been created that combines all hardware aspects of the development of the quality of processed products, where it analyzes the quality of workpieces that depend on the processing technology. However, this depends largely on the technological system used. The paper includes measurements, data acquisition and back-checking of the logic of the study of grinding operations. In the introduction, it must be shown that the correct selection and strength characteristics of the tool associated with the cutting mode of grinding determine the accuracy and quality of the surfaces of the ground part. The impact on the service life of the grinding tool was also monitored. The 4 th partial result is also the knowledge that the correct selection of the tool characteristics and cutting mode predicts the quality of the workpiece surface. The operating conditions of the manufactured parts significantly affect the operating values of the production parameters. By appropriate diagnostics in the research process and precise measurements using sensitive sensors, deviations can be minimized. Without this apparatus, it is possible that deviations increase significantly during the operation of the technological system. The size of the deviation during grinding is explained in practice by the presence of vibrations in technological processes. They cause instability of the parameters of the technological system. To stabilize the quality indicators, a mathematical apparatus was also used, which takes into account changes in the technological regime. They are determined by designing adverse conditions, e.g. restoration of the cutting properties of a worn grinding wheel. Therefore, its replacement is logically carried out earlier than its replacement is planned.

  • Optimization of the automatic control system for the maximum power point for a wind-solar generating plant with energy storage

    by layth abd ali, Boris A. Yakimovich, Victoria V. Syaktereva, Vladimir V. Kuvshinov, Natalia V. Morozova

    Direct solar energy conversion systems based on semiconductor, photovoltaic cells have been employed for decades for aerospace technology and ground-based consumers. The article presents the developed information and control system for combined electric energy generating installation by solar and wind energy conversion. A combined system, which employs two or more stable energy sources, is known as a hybrid renewable energy system. It will facilitate the uninterruptible energy generation and allow employing one source in the absence of the other, which is its irrefutable advantage. The study proposes the hybrid energy conversion positioning, which includes photovoltaic panels, wind power generator and batteries. The presented work performed control system optimization of the proposed hybrid wind-solar system, which enhanced significantly efficiency of its application and performance reliability. The model of photovoltaic and wind output power, as well as the model of the battery charging and discharging were obtained by studying the output characteristics of the generating power station. Parameters such as the average annual net profit as a target function and region and area characteristics, planned scale, complementary properties, resources utilization factor and stability of the output as limitations were used while development. A model for the hybrid system of photovoltaic conversion, wind generation and energy storage was constructed employing the proposed method. The results of the experiment demonstrate the proposed approach validity and robustness. The emissions trading revenues inclusion makes the model more accurate. The ideal result is more useful as well. As the article shows, the solar photovoltaic panels distribution affects the overall power generation of the hybrid system. It employs a solar panel connected with a hybrid controller and a wind turbine. The results revealed that continuous power generation was possible when the solar panel was connected with the wind turbine, which improved its power output.


  • Diagnostic Methods of Marketing Activities of the Enterprises

    by All-Russian Research Institute "Center", Tatiana A. Berkutova, Maxim M. Gorokhov, Izhevsk State Technical University named after M.T. Kalashnikov, Boris A. Yakimovich

    Under conditions of formation of technological independence of Russia the most important task is to ensure market orientation of production capabilities of domestic enterprises of the military-industrial complex. Possessing significant scientific and technological, production and personnel potential, they can realize large-scale production tasks of high-tech civilian and dual-use products aimed at achieving import substitution goals and overcoming the sanctions against the Russian Federation. It is impossible to solve the strategic tasks without transformations in marketing activities at the military-industrial complex enterprises, which, from the point of view of practical use, makes the task of marketing activities diagnostics at the enterprise urgent on the threshold of its expected change. Based on the results of the work, diagnostic method of the enterprises marketing activities is presented. The proposed method makes it possible to ensure the strategic nature of the business, its mobility and adaptability and the ability to be profitable in the future.

  • Diagnostic Model in Change Management at the Enterprise

    by All-Russian Research Institute ", Tatiana A. Berkutova, Center, Olga V. Mishchenkova, Izhevsk State Technical University named after M.T. Kalashnikov, Boris A. Yakimovich

    Several situational, congruent and normative diagnostic models used in the practice of organizational diagnostics were singled out in the course of empirical research. Diagnostic model of marketing activity of the enterprise is proposed. It presents the main diagnostic blocks and the relationship between them. The elements in the blocks can be configured in different ways depending on the tasks, external conditions, resources, and etc. The model is based on the results of the analysis of well-known change management models proposed by K. Levin, L. Greiner, F. Gouillard and J. Kelly, D. J. Duck, M. Beer and N. Nohria and others, as well as the following diagnostic models: Six Cells model of M. Weisbord, the model of Burke-Litvin, 7S McKinsey model and model of D.Nadler and M. Tushman. The proposed diagnostic model of marketing activity of the enterprise is complex in nature, involves the use of various approaches, as well as systems of indicators for evaluating marketing activities in the process of diagnostics, that later on allows developing appropriate methodological and methodical aspects of changes management in marketing at the enterprise.complex diagnostic model presented in the article allows linking the factors of external environment of the enterprise, general and marketing strategies and goals, as well as the subsystems of internal environment of economic entity in diagnostic process.


  • Comparison of the effectiveness of various methods for controlling the energy parameters of photovoltaic systems

    by Hayder Abdulsahib Issa Issa, Layth Mohammed AbdAli AbdAli, Boris A. Yakimovich, Vladimir V. Kuvshinov, Natalia V. Morozova, Maria V. Fedotikova

  • MODELING AND CONTROLLING A GRID-CONNECTED WIND ENERGY SYSTEM USING A PERMANENT MAGNET SYNCHRONOUS GENERATOR (PMSG)

    by layth abd ali, F.M. Al-Rufaee, H.A. Issa, B.A. Yakimovich

    Wind power is considered one of the proven technologies. Due to the competitive costs of generating electricity, the Wind Energy Conversion System (WECS) is currently used to meet both grid-related and stand-alone loads. The goal of this work is to develop and simulate a wind turbine-driven permanent magnet synchronous generator (PMSG) that supplies ac electricity to the utility grid with total autonomy. Two voltage source inverters are used to control wind turbines connected to the grid in order to provide good autonomous control. The generator-side inverter is used to modify the synchronous generator and, when necessary, disconnect it from the grid. The grid-side inverter regulates the power flow between the DC bus and the AC side. Space vector PWM and a back-to-back frequency converter are used to regulate both. In addition, the controller PI is employed to manage the wind turbine's pitch angle. In the Matlab Simulink 2019a environment, the entire autonomous system is modeled and simulated.

  • Application of information technologies and principles of lean production for efficiency improvement of machine building enterprises

    by Marina A. Razzhivina, Boris A. Yakimovich, Aleksandr I. Korshunov

    The head-line of the article is advisability to combine information technologies and principles of lean production in activity of machine building enterprises to ensure efficiency improvement. The article reviews enterprise resource planning systems and the lean production conceptions: their development and construction basis, main advantages and weaknesses.