ALAlimuddin

Alimuddin

*This is an algorithmically generated author record based on publicly available information.

Alimuddin has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Retracted
    Open Access

    A Comprehensive Study on the Synthesis and Characterization of TiO2 Nanoparticles Using Aloe vera Plant Extract and Their Photocatalytic Activity against MB Dye

    by S. Srujana, M. Anjamma, Alimuddin, Bharat Singh, Ram C. Dhakar, Shanthi Natarajan, Ramana Hechhu

    This paper investigates the use of A. vera extract as a natural capping agent for TiO2 nanoparticles as well as a reducing agent for TiO2 nanoparticles. XRD, ultraviolet diffuse reflectance (UV-DRS), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy-dispersive X-ray analysis (EDXA) were used to characterize the material. In their X-ray diffraction patterns, the titanium dioxide nanoparticles were found to have a high degree of crystallinity, indicating that they were synthesized. Infrared (FT-IR) spectra were used to determine the chemical composition of the plant extract. The DRS spectra in the UV-visible range reveal a high absorption peak at 356 nm, which indicates the existence of TiO2 nanoparticles in the sample. Shape of nanoparticles was revealed by SEM and TEM morphological investigations, which revealed their irregular and somewhat spherical nature. Only titanium and oxygen compounds were found in the EDX spectrum, indicating that they were present. This demonstrates that the NPs that were produced are devoid of contaminants. Using the produced nanoparticles as catalyst, we presented a photocatalytic degradation method for the dye methylene blue in this paper. The findings showed that 94 percent of the damage occurred within 120 minutes of being exposed to UV radiation.


  • Retracted
    Open Access

    Methylene Blue Dye Photodegradation during Synthesis and Characterization of WO3 Nanoparticles

    by Raviteja Surakasi, Alimuddin, Yenda Srinivasa Rao, Ashitha K. Sanuj, Pravin P. Patil, A. Jayaganthan, Ramana Hechhu

    Semiconductor-based photocatalytic systems have found widespread use in environmental pollution cleanup and renewable energy production. In this study, we synthesized WO3 as a catalyst for the degradation of methylene blue, a thiazine dye, which was used in the previous work. The hydrothermal process is used to create WO3 nanoparticles, which are made from sodium tungstate. When it comes to confirming the nanoparticles, many characterization techniques are employed, including X-ray diffraction (XRD), Fourier transform infrared (FTIR), UV-Vis diffuse reflectance spectrometer (DRS), X-ray photoelectron spectroscopy (XPS), and field emission–scanning electron microscope (FE-SEM). The existence of monoclinic crystalline structure is shown by XRD, with the average crystalline size being around 34 nm. FTIR confirms the presence of metal oxides. The pellucid absorption extremity in the UV-Vis region corresponds to the rudimentary absorption of the WO3 semiconductor. FE-SEM confirms square-shaped nanoplates with EDX address the occurrence of elemental tungsten. The photocatalytic activity of WO3 nanoparticles against methylene blue is taken for at different intervals of time that confirms MB’s degradation. Our present work suggests that prepared nanoparticles should be potential for photocatalysts using various industrial dyes.


  • Retracted
    Open Access

    Retracted: Reduction of Carbon-Based Emissions using MgO Nanoparticle with Waste Cooking Oil Biodiesel in Diesel Engine

    by Mohammad A. Al Zubi, A. Jayaganthan, Alimuddin, Mohd Yunus Khan, Ravi Kumar, Bharat Singh, Vighneswara Rao Kakara

    Because biofuels are ecologically beneficial and might possibly lessen global warming, many academics are interested in studying them. Nanoparticles have been added to biodiesel to improve its performance as well as emissions. Diesel engine that operates on waste cooking oil biodiesel is the subject of the present research, which evaluates the impact of MgO nanoadditives on performance and emissions. Transesterification was done to convert waste cooking oil biodiesel into methyl ester. In the present study, SEM (scanning electron microscope), TEM (transmission electron microscope), and EDX spectroscopy are used for investigation of nanoadditives. The sample contained biodiesel blends with and without nanomagnesium oxide, as well as a combination of the two. According to the ASTM (American Society for Testing and Materials), the biodiesel produced from waste cooking oil met all fuel standards. The results of the testing were obtained by running a single-cylinder, 4-stroke diesel engine under a variety of loads. Using SEM analysis, the diameter of nanoparticles is found to be 20nm to 38nm. Magnesium oxide nanoparticles have been shown to include the elements oxygen, iron sulphide, silicon dioxide, and sodium. Oxygen accounted for about 50.74 percent of the samples, magnesium accounted for 45.36 percent, silicon dioxide accounted for 3.24 percent, and sodium accounted for 0.66 percent using EDX spectra. Magnesium oxide develops in unique shapes, with diameters varying from 9.24 to 14.94nm, as seen in the TEM picture. An investigation found that B20 using 100ppm MgO nanoparticles increases BTE (brake thermal efficiency) by 2.1 percent while simultaneously reducing SFC (specific fuel consumption) which was found to be ranging from 0.54 to 0.38kg/kWh, respectively. B20 nanoparticles were used to reduce the amount of HC, CO, and smoke emitted by engines.


  • Open Access

    Morphological, Structural, and Optical Properties of Doped/Codoped ZnO Nanocrystals Film Prepared by Spin Coating Technique and Their Gas Sensing Application

    by Neha Verma, Vishal Jagota, Alimuddin, Arnold C. Alguno, Manik Rakhra, Chanthirasekaran K., Betty Nokobi Dugbakie

    In today’s world of electronics, nanomaterial applications pose a challenge. The spin coating approach was used to create nanostructured ZnO with wurtzite structure in a recent study. Antimony doping, aluminum, and antimony codoping with 2.0 percent were used to make these films. The impact of doped and codoped films on structural, optical properties, and morphological has been examined using a variety of characterization approaches. A ZnO nanocrystal with a diameter of 20‐30 nm was discovered using XRD (X‐ray diffraction). According to SEM (scanning electron microscope) scans, the grain size is in the 80‐120 nm region. The use of Fourier transform infrared spectroscopy (FTIR) to detect elemental elements was studied, and the peak at 400‐520 cm-1 was identified as ZnO. The optical properties of doped and codoped ZnO were checked, and it was discovered that antimony‐doped ZnO has a larger band gap than Al and antimony‐codoped ZnO. This proved that ZnO may be used in gas sensors and solar cells. The gas response of a static gas sensor system based on Sb‐doped films was measured and compared to Al‐ and Sb‐codoped films in the presence of ethanol vapor.


  • Open Access

    Characterization of Fabricated Gold‐Doped ZnO Nanospheres and Their Use as a Photocatalyst in the Degradation of DR‐31 Dye

    by Neha Verma, Vishal Jagota, Arnold C. Alguno, Alimuddin, Manik Rakhra, Pawan Kumar, Betty Nokobi Dugbakie

    Water contamination is a significant issue in the modern day, caused by the textile dying business, and it has a detrimental impact on living organisms. We report on the manufacture of gold‐doped ZnO nanospheres using a simple heat treatment approach and the use of ZnO nanoparticles as photocatalysts for the degradation of methyl orange dye. To increase this degrading activity, Au was utilised as a modifier, and their temperature quenching effect was noticed. One of the most efficient electron grabbers in the conduction band is Au ion. The novelty of this recent research is that it has found that anatase to rutile phase transformation is promoted, and the highest transformation was achieved by using 1.0% of Au, which proves Au‐doped ZnO‐based nanoparticles are best for this degradation of dyes. The structural, morphological, optical, electrical, and photocatalytic characteristics of the synthesised nanocatalysts were determined. These nanoparticles have a grain size of 45‐75 nm. Photocatalytic activity was investigated using UV‐Vis spectra, and a significant absorption peak of about 482 nm was discovered. With increasing frequency, the dielectric constant and frequency of the produced nanoparticles drop. The kinetic analysis yields a rate constant of 0.0165 min-1 for nanosphere‐like particles. At a concentration of 1% Au, the produced nanoparticles degrade the dye completely in 150 minutes when exposed to UV light.