Abdalrahman Alajmi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Abdalrahman Alajmi has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Abdullah Shalwan
Department of Manufacturing Engineering Technology, Public Authority for Applied Education and Training, Kuwait City 13092, Kuwait
3 shared publications - Rajab Abousnina
School of Engineering, Faculty of Science and Engineering, Macquarie University, Sydney, NSW 2109, Australia
2 shared publications - Abdellatif Mohammad Sadeq
Mechanical and Industrial Engineering Department, College of Engineering, Qatar University, Doha, Qatar
1 shared publication - Abdullah M Gh Alfadhili
Department of Power and Desalination Plants, Ministry of Electricity and Water, Kuwait City 12010, Kuwait
1 shared publication - Ahmed M. Hassan
Department of Mechanical Engineering University of Al‐Qadisiyah Al‐Qadisiyah Iraq
1 shared publication - Amro A. Nour
Electrical and Computer Engineering, College of Engineering and Applied Science, American University of Kuwait, Kuwait City 13034, Kuwait
1 shared publication
Latest Publications
- Open Access
- 4 June 2026
- Published by MDPI AG in Proceedings
- Vol. 142 (1) , 4
Interpretable Artificial Intelligence Empowering Economic Diversification in Smart Manufacturing
Economic diversification across the Gulf region, including Kuwait Vision 2035, positions smart manufacturing as a key enabler of sustainable growth. Yet, industrial datasets in the region are typically small, heterogeneous, and incomplete, limiting the performance and trustworthiness of conventional AI models. This paper introduces a Scalable Random Forest (SRF) framework enhanced with a Decision Path Search (DPS) mechanism to address these challenges through both technical robustness and practical interpretability. The SRF pipeline incorporates leakage-safe preprocessing, mixed-type imputation, and small-data augmentation to improve prediction stability under real industrial constraints, while DPS transforms model internals into actionable operational causal knowledge identifying optimal and avoidance parameter ranges. Case studies, including investment casting, demonstrate that SRF + DPS not only outperforms established baselines such as Random Forest (RF), XGBoost, LightGBM, and CatBoost but also deliver transparent insights that engineers can directly apply to reduce defects and enhance process control. The findings highlight how interpretable AI frameworks can accelerate industrial modernization, strengthen regional manufacturing competitiveness, and support national economic diversification strategies.
- 4 June 2026
- Published by MDPI AG in Proceedings
- Vol. 142 (1) , 4
Open AccessInterpretable Artificial Intelligence Empowering Economic Diversification in Smart Manufacturing
Economic diversification across the Gulf region, including Kuwait Vision 2035, positions smart manufacturing as a key enabler of sustainable growth. Yet, industrial datasets in the region are typically small, heterogeneous, and incomplete, limiting the performance and trustworthiness of conventional AI models. This paper introduces a Scalable Random Forest (SRF) framework enhanced with a Decision Path Search (DPS) mechanism to address these challenges through both technical robustness and practical interpretability. The SRF pipeline incorporates leakage-safe preprocessing, mixed-type imputation, and small-data augmentation to improve prediction stability under real industrial constraints, while DPS transforms model internals into actionable operational causal knowledge identifying optimal and avoidance parameter ranges. Case studies, including investment casting, demonstrate that SRF + DPS not only outperforms established baselines such as Random Forest (RF), XGBoost, LightGBM, and CatBoost but also deliver transparent insights that engineers can directly apply to reduce defects and enhance process control. The findings highlight how interpretable AI frameworks can accelerate industrial modernization, strengthen regional manufacturing competitiveness, and support national economic diversification strategies.
- Open Access
- 1 February 2026
- Published by Springer Nature
- p. 195-206
Impact of Peak-Time Power Shortages on Thermal Comfort in Kuwaiti Homes: Toward a Cyber-Physical Energy Testing Framework
Power outages during peak hours in Kuwait can seriously impact the comfort of indoor spaces, especially during the intense summer heat. When cooling systems go offline, even for a short time, indoor temperatures can rise quickly, making homes uncomfortable and potentially unsafe. This study looks at how these energy limitations affect thermal comfort inside buildings and proposes a cyber-physical energy assessment framework aimed at improving energy efficiency while reducing discomfort during critical periods. We examine household temperature conditions, adaptive comfort techniques, and real-time power usage data using a mixed-method approach. Results show that outages during peak hours cause extreme heat stress, which causes residents to use ineffective cooling techniques. To help buildings better cope with power outages, the proposed cyber-physical framework brings together energy management systems, smart sensors, and predictive modeling. By combining these elements, the study aims to strike a balance between keeping occupants comfortable and using energy more efficiently. It also offers practical insights that can benefit homeowners, energy planners, and policymakers looking to make buildings more resilient and sustainable in challenging climates. This study highlights the urgent need to adopt smart energy solutions that can improve everyday living conditions in Kuwait while also addressing broader challenges related to long-term energy sustainability.
- 1 February 2026
- Published by Springer Nature
- p. 195-206
Open AccessImpact of Peak-Time Power Shortages on Thermal Comfort in Kuwaiti Homes: Toward a Cyber-Physical Energy Testing Framework
Power outages during peak hours in Kuwait can seriously impact the comfort of indoor spaces, especially during the intense summer heat. When cooling systems go offline, even for a short time, indoor temperatures can rise quickly, making homes uncomfortable and potentially unsafe. This study looks at how these energy limitations affect thermal comfort inside buildings and proposes a cyber-physical energy assessment framework aimed at improving energy efficiency while reducing discomfort during critical periods. We examine household temperature conditions, adaptive comfort techniques, and real-time power usage data using a mixed-method approach. Results show that outages during peak hours cause extreme heat stress, which causes residents to use ineffective cooling techniques. To help buildings better cope with power outages, the proposed cyber-physical framework brings together energy management systems, smart sensors, and predictive modeling. By combining these elements, the study aims to strike a balance between keeping occupants comfortable and using energy more efficiently. It also offers practical insights that can benefit homeowners, energy planners, and policymakers looking to make buildings more resilient and sustainable in challenging climates. This study highlights the urgent need to adopt smart energy solutions that can improve everyday living conditions in Kuwait while also addressing broader challenges related to long-term energy sustainability.
- Open Access
- 26 August 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (17) , 7344
The Influence of Fibres on the Properties and Sustainability of Oil-Impacted Concrete
There are significant environmental and health consequences associated with oil-contaminated sand due to its toxic and persistent nature. The impacts include disrupted ecosystems with harm to plants and animals and contamination of water sources, requiring immediate and sustained remediation. Using oil-contaminated sand in construction addresses waste management and promotes sustainability by reducing waste, protecting the environment, saving energy, and driving innovation. This study investigates the impact of crude oil-contaminated sand on concrete’s physical and mechanical characteristics. It focuses on assessing the impact of incorporating four different fibres (Forta Ferro PP, ReoShore 45 PP, glass, and steel fibres) and finding the optimal quantity (0.1, 0.2, 0.3, 0.4 or 0.5%) to improve the physical and mechanical properties of concrete prepared with sand contaminated by crude oil. The impact of crude oil on the bond strength between fibres and concrete was examined. Additionally, the effect of crude oil on heat flow and cumulative heat was analysed. The results demonstrated that increasing oil content decreases concrete density and compressive strength. Nevertheless, the findings indicated that sand contaminated with 10% oil is suitable for low-strength concrete applications. Incorporating 0.1% of Forta Ferro PP, glass, and ReoShore 45 PP fibres had a negligible impact on the mechanical properties of concrete contaminated with 10% oil. Comparatively, steel fibres enhanced the concrete’s compressive strength by 30% at 0.1%, and the flexural strength improved by 9.6% at 0.5%. Concrete with a 10% crude oil content reinforced with steel fibres hinders fracture stabilisation and load transfer, making it suitable as a sustainable material for low-strength civil engineering applications.
- 26 August 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (17) , 7344
Open AccessThe Influence of Fibres on the Properties and Sustainability of Oil-Impacted Concrete
There are significant environmental and health consequences associated with oil-contaminated sand due to its toxic and persistent nature. The impacts include disrupted ecosystems with harm to plants and animals and contamination of water sources, requiring immediate and sustained remediation. Using oil-contaminated sand in construction addresses waste management and promotes sustainability by reducing waste, protecting the environment, saving energy, and driving innovation. This study investigates the impact of crude oil-contaminated sand on concrete’s physical and mechanical characteristics. It focuses on assessing the impact of incorporating four different fibres (Forta Ferro PP, ReoShore 45 PP, glass, and steel fibres) and finding the optimal quantity (0.1, 0.2, 0.3, 0.4 or 0.5%) to improve the physical and mechanical properties of concrete prepared with sand contaminated by crude oil. The impact of crude oil on the bond strength between fibres and concrete was examined. Additionally, the effect of crude oil on heat flow and cumulative heat was analysed. The results demonstrated that increasing oil content decreases concrete density and compressive strength. Nevertheless, the findings indicated that sand contaminated with 10% oil is suitable for low-strength concrete applications. Incorporating 0.1% of Forta Ferro PP, glass, and ReoShore 45 PP fibres had a negligible impact on the mechanical properties of concrete contaminated with 10% oil. Comparatively, steel fibres enhanced the concrete’s compressive strength by 30% at 0.1%, and the flexural strength improved by 9.6% at 0.5%. Concrete with a 10% crude oil content reinforced with steel fibres hinders fracture stabilisation and load transfer, making it suitable as a sustainable material for low-strength civil engineering applications.
- Open Access
Theoretical Study of the Effect of Fibre Porosity on the Heat Conductivity of Reinforced Gypsum Composite Material
In recent years, there has been an increasing demand for engineering materials that possess good mechanical and thermal properties and are cheap an d environmentally friendly. From an industrial and academic point of view, there is a need to study the heat conductivity of newly developed polymer composites and the influence of porosity on the insulation performance of polymer composites. Experimental and theoretical studies were conducted on mainly sisal/glass fibre gypsum composites with different fibre volumes (0, 20, 25, 30, and 35 wt.%). The outcomes from the theoretical model in ANSYS have shown that there is a high possibility to simulate the experimental work and high accuracy for reflecting the experimental findings. Moreover, the results show that natural fibre polymer composites with a high-volume fraction of natural fibres have higher insulation performance than synthetic polymer composites with the same volume fraction of synthetic fibres. Furthermore, the results suggest and support that the improved performance of natural fibre-based composites was due at least in part to the internal porosity of the fibres.
Open AccessTheoretical Study of the Effect of Fibre Porosity on the Heat Conductivity of Reinforced Gypsum Composite Material
In recent years, there has been an increasing demand for engineering materials that possess good mechanical and thermal properties and are cheap an d environmentally friendly. From an industrial and academic point of view, there is a need to study the heat conductivity of newly developed polymer composites and the influence of porosity on the insulation performance of polymer composites. Experimental and theoretical studies were conducted on mainly sisal/glass fibre gypsum composites with different fibre volumes (0, 20, 25, 30, and 35 wt.%). The outcomes from the theoretical model in ANSYS have shown that there is a high possibility to simulate the experimental work and high accuracy for reflecting the experimental findings. Moreover, the results show that natural fibre polymer composites with a high-volume fraction of natural fibres have higher insulation performance than synthetic polymer composites with the same volume fraction of synthetic fibres. Furthermore, the results suggest and support that the improved performance of natural fibre-based composites was due at least in part to the internal porosity of the fibres.
- Open Access
Experimental Research and Numerical Analysis of CFRP Retrofitted Masonry Triplets under Shear Loading
This paper presents an experimental and numerical study into the shear response of brick masonry triplet prisms under different levels of precompression, as well as samples reinforced with carbon fiber-reinforced polymer (CFRP) strips. Masonry triplets were constructed with two different mortar mix ratios (1:1:3 and 1:1:5). In this study, finite element models for the analysis of shear triplets are developed using detailed micro-modelling (DMM) approach and validated with the experimental data. The failure mechanisms observed in the masonry triplets were simulated using a coupled XFEM-cohesive behaviour approach in ABAQUS finite element software. The nonlinear behaviour of mortar and brick was simulated using the concrete damaged plasticity (CDP) constitutive laws. The cohesive element with zero thicknesses was employed to simulate the behaviour of the unit–mortar interfaces. The extended finite element method (XFEM) was employed to simulate the crack propagation in the mortar layer without an initial definition of crack location. CFRP strips were simulated by 3D shell elements and connected to masonry elements by an interface model. The changes in failure mechanism and shear strength are calculated for varying types of mortar and fiber orientation of CFRP composite. Based on this study, it was concluded that the ultimate shear strength of masonry triplets is increased due to the external bonding of CFRP strips. The performance of masonry specimens strengthened with CFRP strips is assessed in terms of gain in shear strength and post-peak behaviour for all configurations and types of mortar considered. The comparison of FE and experimental results proved that the models have the potential to be used in practice to accurately predict the shear strength and reflect damage progression in unreinforced and CFRP-reinforced masonry triplets under in-plane loading, including the debonding of the CFRP reinforcement. Additionally, XFEM was found to be a powerful technique to be used for the location of crack initiation and crack propagation in the mortar layer.
Open AccessExperimental Research and Numerical Analysis of CFRP Retrofitted Masonry Triplets under Shear Loading
This paper presents an experimental and numerical study into the shear response of brick masonry triplet prisms under different levels of precompression, as well as samples reinforced with carbon fiber-reinforced polymer (CFRP) strips. Masonry triplets were constructed with two different mortar mix ratios (1:1:3 and 1:1:5). In this study, finite element models for the analysis of shear triplets are developed using detailed micro-modelling (DMM) approach and validated with the experimental data. The failure mechanisms observed in the masonry triplets were simulated using a coupled XFEM-cohesive behaviour approach in ABAQUS finite element software. The nonlinear behaviour of mortar and brick was simulated using the concrete damaged plasticity (CDP) constitutive laws. The cohesive element with zero thicknesses was employed to simulate the behaviour of the unit–mortar interfaces. The extended finite element method (XFEM) was employed to simulate the crack propagation in the mortar layer without an initial definition of crack location. CFRP strips were simulated by 3D shell elements and connected to masonry elements by an interface model. The changes in failure mechanism and shear strength are calculated for varying types of mortar and fiber orientation of CFRP composite. Based on this study, it was concluded that the ultimate shear strength of masonry triplets is increased due to the external bonding of CFRP strips. The performance of masonry specimens strengthened with CFRP strips is assessed in terms of gain in shear strength and post-peak behaviour for all configurations and types of mortar considered. The comparison of FE and experimental results proved that the models have the potential to be used in practice to accurately predict the shear strength and reflect damage progression in unreinforced and CFRP-reinforced masonry triplets under in-plane loading, including the debonding of the CFRP reinforcement. Additionally, XFEM was found to be a powerful technique to be used for the location of crack initiation and crack propagation in the mortar layer.
- Open Access
An Experimental and Numerical Investigation into the Durability of Fibre/Polymer Composites with Synthetic and Natural Fibres
Progress in engineering research has shifted the interest from traditional monolithic materials to modern materials such as fibre reinforced composites (FRC). This paradigm shift can be attributed to the unique mechanical characteristics of FRCs such as high strength to weight ratio, good flexural strength, and fracture toughness. At present, synthetic composites dominate the automotive, aerospace, sporting, and construction industries despite serious drawbacks such as costly raw materials, high manufacturing costs, non-recyclability, toxicity, and non-biodegradability. To address these issues, naturally occurring plant fibres (such as jute, hemp, sisal) are being increasingly researched as potential reinforcements for biodegradable or non-biodegradable polymer matrices to produce environmentally friendly composites. In this study, sisal fibres were selected owing to their low production costs, sustainability, recyclability, and biodegradability. The hydrothermal ageing and mechanical characteristics of sisal fibre-reinforced epoxy (SFRE) composites were determined and compared with glass fibre-reinforced epoxy (GFRE) synthetic composites. Moreover, a first-of-its-kind numerical model have been developed to study the hydrothermal ageing and mechanical characteristics of SFRE, along with GFRE, using ANSYS software. Moreover, microstructural analysis of flexural tested GFRE and SFRE samples were carried out to identify the microstructural properties of the composites. Both experimental and numerical results exhibited an influence of short- or long-term hydrothermal treatment on the flexural properties of glass and sisal fibre-based composites. In the case of GFRE, the moisture uptake and fibre-matrix de-bonding existed, but it is less severe as compared to the SFRE composites. It was found that the dosage of sisal fibres largely determines the ultimate mechanical performance of the composite. Nonetheless, the experimental and numerical flexural strengths of SFRE were comparable to GFRE composites. This exhibited that the SFRE composites possess the potentiality as a sustainable material for advanced applications.
Open AccessAn Experimental and Numerical Investigation into the Durability of Fibre/Polymer Composites with Synthetic and Natural Fibres
Progress in engineering research has shifted the interest from traditional monolithic materials to modern materials such as fibre reinforced composites (FRC). This paradigm shift can be attributed to the unique mechanical characteristics of FRCs such as high strength to weight ratio, good flexural strength, and fracture toughness. At present, synthetic composites dominate the automotive, aerospace, sporting, and construction industries despite serious drawbacks such as costly raw materials, high manufacturing costs, non-recyclability, toxicity, and non-biodegradability. To address these issues, naturally occurring plant fibres (such as jute, hemp, sisal) are being increasingly researched as potential reinforcements for biodegradable or non-biodegradable polymer matrices to produce environmentally friendly composites. In this study, sisal fibres were selected owing to their low production costs, sustainability, recyclability, and biodegradability. The hydrothermal ageing and mechanical characteristics of sisal fibre-reinforced epoxy (SFRE) composites were determined and compared with glass fibre-reinforced epoxy (GFRE) synthetic composites. Moreover, a first-of-its-kind numerical model have been developed to study the hydrothermal ageing and mechanical characteristics of SFRE, along with GFRE, using ANSYS software. Moreover, microstructural analysis of flexural tested GFRE and SFRE samples were carried out to identify the microstructural properties of the composites. Both experimental and numerical results exhibited an influence of short- or long-term hydrothermal treatment on the flexural properties of glass and sisal fibre-based composites. In the case of GFRE, the moisture uptake and fibre-matrix de-bonding existed, but it is less severe as compared to the SFRE composites. It was found that the dosage of sisal fibres largely determines the ultimate mechanical performance of the composite. Nonetheless, the experimental and numerical flexural strengths of SFRE were comparable to GFRE composites. This exhibited that the SFRE composites possess the potentiality as a sustainable material for advanced applications.