Yanshuai Ye
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yanshuai Ye has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Zhiqing Zhang
School of Mechanical and Automotive Engineering, Guangxi University of Science and Technology, Liuzhou 545006, China
3 shared publications - Chao Cao
Shanghai Wenze Communication Technology Center, Shanghai 201712, China
1 shared publication - Hongting Zhao
Guangxi Earthmoving Machinery Collaborative Innovation Center, Guangxi University of Science and Technology, Liuzhou 545006, China
1 shared publication - Huiqiong Huang
School of Mechanical and Automotive Engineering, Guangxi University of Science and Technology, Liuzhou 545006, China
1 shared publication - Jian Zhang
School of Mechanical and Automotive Engineering, Guangxi University of Science and Technology, Liuzhou 545006, China
1 shared publication - Jingyi Hu
School of Mechanical and Automotive Engineering, Guangxi University of Science and Technology, Liuzhou 545006, China
1 shared publication
Latest Publications
- Open Access
Effects Analysis of FAME on the Engine Characteristics of Different Polymerized Biofuels in Compression Ignition Engine
Environmental pollution caused by marine engines fueled with fossil fuels is a matter of growing significance. The search for renewable and clean energy sources and improvements in the way fossil fuels are burnt aims to reduce the environmental impact of these engines. For this purpose, fatty acid methyl esters were produced from pure canola oil using KOH-assisted methanol-based transesterification with a maximum yield of 90.68 ± 1.6%. The marine engine’s model was created with CONVERGE software, followed by experimental verification. This paper examines the blended fuel characteristics of a diesel engine with biodiesel blends (0%, 5%, 10%, and 15%) at different loads of engines (50%, 75%, and 100%). It also explores the variation in these characteristics of B10 (10% biodiesel–diesel blends) at three different load conditions and four different EGR rates (0%, 5%, 10%, and 15%). The results indicate that the addition of biodiesel to diesel fuel reduces CO, HC, and soot emissions, while increasing NOx emissions. Additionally, the EGR rate decreases NOx emissions but results in higher levels of soot, CO, and HC emissions. Finally, response surface methodology was used to elicit the engine’s characteristics. It was determined that the optimum experimental operating conditions were 100% engine load, 6.9% biodiesel addition, and 7.7% EGR. The corresponding BTE, BSFC, NOx, and HC emissions were 38.15%, 282.62 g/(kW-h), 274.38 ppm, and 410.37 ppm, respectively.
Open AccessEffects Analysis of FAME on the Engine Characteristics of Different Polymerized Biofuels in Compression Ignition Engine
Environmental pollution caused by marine engines fueled with fossil fuels is a matter of growing significance. The search for renewable and clean energy sources and improvements in the way fossil fuels are burnt aims to reduce the environmental impact of these engines. For this purpose, fatty acid methyl esters were produced from pure canola oil using KOH-assisted methanol-based transesterification with a maximum yield of 90.68 ± 1.6%. The marine engine’s model was created with CONVERGE software, followed by experimental verification. This paper examines the blended fuel characteristics of a diesel engine with biodiesel blends (0%, 5%, 10%, and 15%) at different loads of engines (50%, 75%, and 100%). It also explores the variation in these characteristics of B10 (10% biodiesel–diesel blends) at three different load conditions and four different EGR rates (0%, 5%, 10%, and 15%). The results indicate that the addition of biodiesel to diesel fuel reduces CO, HC, and soot emissions, while increasing NOx emissions. Additionally, the EGR rate decreases NOx emissions but results in higher levels of soot, CO, and HC emissions. Finally, response surface methodology was used to elicit the engine’s characteristics. It was determined that the optimum experimental operating conditions were 100% engine load, 6.9% biodiesel addition, and 7.7% EGR. The corresponding BTE, BSFC, NOx, and HC emissions were 38.15%, 282.62 g/(kW-h), 274.38 ppm, and 410.37 ppm, respectively.
- Open Access
Effect of Different Ratios of Gasoline-Ethanol Blend Fuels on Combustion Enhancement and Emission Reduction in Electronic Fuel Injection Engine
The severity of engine emissions for the environment and human health cannot be ignored. This article optimizes the combustion and emission of gasoline-cassava bioethanol fuel blends in electronic fuel injection engines using response surface methodology to achieve the goal of reducing carbon and pollutant emissions. The experiment investigated the effects of different gasoline-cassava bioethanol mixing ratios (G100, G90E10, G80E20, and G70E30) on engine performance, including torque, brake specific fuel consumption, power, total hydrocarbons, nitrogen oxides, and carbon monoxide emissions. The results show that the gasoline-cassava bioethanol fuel blend is not as good as G100 in terms of braking power, torque, and brake specific fuel consumption, but better than G100 in terms of carbon monoxide emissions and total hydrocarbon emissions. Then, the optimization objective function was determined, and the combustion and emission characteristics were optimized using the response surface methodology method. The optimization results indicate that the response surface methodology method can determine the interaction between design variables such as brake specific fuel consumption, nitrogen oxides, and total hydrocarbon emissions and find the best solution. In this experiment, the independent variables of the best solution were 72.9 N·m torque, 30% G70E30 mixing rate, and 2000 rpm speed, corresponding to brake specific fuel consumption at 313 g/(kW·h), nitrogen oxide emissions at 2.85 × 103 ppm, and total hydrocarbon emissions at 166 ppm. The findings of this study indicate that by optimizing the gasoline-cassava bioethanol mixture ratio, lower emission levels can be achieved in electronic fuel injection engines, thereby promoting the sustainable development of renewable energy and reducing pollutant emissions.
Open AccessEffect of Different Ratios of Gasoline-Ethanol Blend Fuels on Combustion Enhancement and Emission Reduction in Electronic Fuel Injection Engine
The severity of engine emissions for the environment and human health cannot be ignored. This article optimizes the combustion and emission of gasoline-cassava bioethanol fuel blends in electronic fuel injection engines using response surface methodology to achieve the goal of reducing carbon and pollutant emissions. The experiment investigated the effects of different gasoline-cassava bioethanol mixing ratios (G100, G90E10, G80E20, and G70E30) on engine performance, including torque, brake specific fuel consumption, power, total hydrocarbons, nitrogen oxides, and carbon monoxide emissions. The results show that the gasoline-cassava bioethanol fuel blend is not as good as G100 in terms of braking power, torque, and brake specific fuel consumption, but better than G100 in terms of carbon monoxide emissions and total hydrocarbon emissions. Then, the optimization objective function was determined, and the combustion and emission characteristics were optimized using the response surface methodology method. The optimization results indicate that the response surface methodology method can determine the interaction between design variables such as brake specific fuel consumption, nitrogen oxides, and total hydrocarbon emissions and find the best solution. In this experiment, the independent variables of the best solution were 72.9 N·m torque, 30% G70E30 mixing rate, and 2000 rpm speed, corresponding to brake specific fuel consumption at 313 g/(kW·h), nitrogen oxide emissions at 2.85 × 103 ppm, and total hydrocarbon emissions at 166 ppm. The findings of this study indicate that by optimizing the gasoline-cassava bioethanol mixture ratio, lower emission levels can be achieved in electronic fuel injection engines, thereby promoting the sustainable development of renewable energy and reducing pollutant emissions.
- Open Access
Review of Particle Filters for Internal Combustion Engines
Diesel engines have gradually become one of the main forces in the human transportation industry because of their high efficiency, good durability, and stable operation. However, compared with gasoline vehicles, the high emission of diesel vehicles forces manufacturers to introduce new pollutant control technologies. Although the particulate matter emissions of gasoline vehicles are lower than that of diesel vehicles, with the popularity of gasoline vehicles and the continuous rise of power, the impact of these particles on the environment cannot be ignored. Therefore, diesel particulate filters and gasoline particulate filters have been invented to collect the fine particles in the exhaust gas to protect the environment and meet increasingly stringent emission regulations. This paper summarizes the research progress on diesel particulate filters and gasoline particulate filters at present and comprehensively introduces the diesel particulate filter and gasoline particulate filter from the mechanism, composition, and operation processes. Additionally, the laws and regulations of various countries and the impact of gas waste particulates on the human body are described. In addition, the mechanisms of the diesel particulate filter, gasoline particulate filter, and regeneration were studied. Finally, the prospects and future directions for the development of particle filters for internal combustion engines are presented.
Open AccessReview of Particle Filters for Internal Combustion Engines
Diesel engines have gradually become one of the main forces in the human transportation industry because of their high efficiency, good durability, and stable operation. However, compared with gasoline vehicles, the high emission of diesel vehicles forces manufacturers to introduce new pollutant control technologies. Although the particulate matter emissions of gasoline vehicles are lower than that of diesel vehicles, with the popularity of gasoline vehicles and the continuous rise of power, the impact of these particles on the environment cannot be ignored. Therefore, diesel particulate filters and gasoline particulate filters have been invented to collect the fine particles in the exhaust gas to protect the environment and meet increasingly stringent emission regulations. This paper summarizes the research progress on diesel particulate filters and gasoline particulate filters at present and comprehensively introduces the diesel particulate filter and gasoline particulate filter from the mechanism, composition, and operation processes. Additionally, the laws and regulations of various countries and the impact of gas waste particulates on the human body are described. In addition, the mechanisms of the diesel particulate filter, gasoline particulate filter, and regeneration were studied. Finally, the prospects and future directions for the development of particle filters for internal combustion engines are presented.