NZNingjuan Zhao

Ningjuan Zhao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ningjuan Zhao has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Iontronic Capacitance-Enhanced Flexible Three-Dimensional Force Sensor With Ultrahigh Sensitivity for Machine-Sensing Interface

    by Daren Wang, Ningjuan Zhao, Zekun Yang, Yangbo Yuan, Hongcheng Xu, Guirong Wu, Weihao Zheng, Xiangrui Ji, Ningning Bai, Weidong Wang, et al.

    Flexible three-dimensional (3D) force sensors have been extensively investigated in the field of robotics due to their ability to provide feedback information from multiple directions. However, the development of flexible 3D force sensors with high sensitivity and decoupling capabilities remains a significant challenge, hindering the ability of robots to perceive their external environment. In this paper, we present a novel flexible 3D force iontronic sensor (FTIS) that utilizes ionic materials with micro-pyramidal structures and a backpropagation (BP) neural network method based on deep learning. The FTIS exhibits outstanding sensitivity, with over 8000 N-1 in the normal direction and over 4000 N-1 in the shear direction, and has a rapid response time of 27 ms. Additionally, it demonstrated stable working durability, with over 8000 cycles without signal delay. To validate the utility of the sensor, we integrated it as a machine-sensing interface on a mechanical claw to measure changes in forces in the triaxial direction. Our design concept has the potential to advance the development of multidimensional force sensors in the future.


  • Flexible Gas-Permeable and Resilient Bowtie Antenna for Tensile Strain and Temperature Sensing

    by Hongcheng Xu, Weihao Zheng, Yangbo Yuan, Dandan Xu, Yuxin Qin, Ningjuan Zhao, Qikai Duan, Yujian Jin, Yuejiao Wang, Weidong Wang, et al.

    As a wireless basic unit, flexible antennas hold a wide range of applications in wearable electronics, soft robotics, and Internet of Things (IoT). However, most of the current flexible antennas are encapsulated by silicone elastomers with poor gas permeability, which severely hinders the evaporation of skin moisture and sweat. In addition, conventional rigid metals as high-frequency conductors are limited by poor elasticity and susceptibility to oxidation for on-skin application. Here, we developed a highly permeable and stretch-resistant flexible bowtie antenna that can capture changes in tensile strain and temperature. A low-impedance flexible carbon nanotube-silver (CNT-Ag) substrate was fabricated as the conductor of the antenna. By optimizing the multibeam bowed geometry and wrapping it in porous thermoplastic polyurethane (TPU) fibers, the final five-beam antenna was obtained and was able to withstand a relatively large tensile stress of 25.2 MPa, yet achieve a high vapor transmission rate of 48.2 mg cm−2 h−1. The antenna obtained an ideal impedance match at 2.28 GHz with doughnut-like radiation and a high radiation efficiency of over 85%. Furthermore, the antenna was successfully used to capture the strain in the wrist epidermis during bending and to detect thermal changes in the beaker of hot water, respectively. Finally, demonstrations of the antenna, such as permeability, radiation to the human body, and integrality in connection with flexible circuits, were carefully developed to reveal its feasibility in the real world. We expect this work to pave the way for the future establishment of epidermally flexible antennas for soft electronics.


  • Flexible Pressure Sensor With Wide Linear Sensing Range for Human–Machine Interaction

    by Libo Gao, Ningjuan Zhao, Hongcheng Xu, Xinkang Hu, Dandan Xu, Weihao Zheng, Weidong Wang

    Flexible pressure sensors hold great potential for applications in human–machine interaction and flexible robotics, but the balance of their sensitivity and sensing range remains a challenge. Here, we proposed a flexible piezoresistive pressure sensor based on poly (3,4-ethylenedioxythiophene):poly(styrene sulfonic acid) (PEDOT: PSS) and cross interlocked nylon fabrics. The sensor exhibited a wide sensing range (~1.5 mPa), a low detection limit (6 Pa), a fast response time (less than 40 ms), and an excellent cycling stability (at least 16 000 cycles without any decay). The excellent performance is attributed to the fact that the cross interlocked structure can form a mechanically stable and three-dimensional (3D) sensitive conductive network which allowed a contact area of the pressure sensor to vary continuously, resulting in an extremely large pressure sensing range. In addition, the sensor array system was successfully fabricated and integrated with a rank scanning circuit to achieve mapping and identification of spatial pressure distribution. Finally, we have built and demonstrated a sensing system capable of wireless real-time gesture interaction with a robot. These results provide a new direction for the fabrication of high-performance sensors with tremendous applications for healthcare, wearable electronics, electronic skin, and smart robots.