Xin Ying Kong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xin Ying Kong has a total of 114 co-authors. Here are the top co-authors by number of shared publications:
- Siang-Piao Chai
Multidisciplinary Platform of Advanced Engineering, Department of Chemical Engineering, School of Engineering, Monash University Malaysia, Jalan Lagoon Selatan, 47500 Bandar Sunway, Selangor, Malaysia
9 shared publications - Lling-Lling Tan
Multidisciplinary Platform of Advanced Engineering, Department of Chemical Engineering, School of Engineering, Monash University Malaysia, Jalan Lagoon Selatan, Bandar Sunway, Selangor, 47500, Malaysia
8 shared publications - Liqun Ye
College of Materials and Chemical Engineering Key Laboratory of Inorganic Nonmetallic Crystalline and Energy Conversion Materials China Three Gorges University Yichang People's Republic of China
6 shared publications Boon-Junn Ng
5 shared publicationsHoule Zhou
Engineering Research Center of Eco‐environment in Three Gorges Reservoir Region Ministry of Education China Three Gorges University Yichang China
3 shared publicationsLutfi Kurnianditia Putri
Multidisciplinary Platform of Advanced Engineering, Chemical Engineering Discipline, School of Engineering, Monash University Malaysia, Jalan Lagoon Selatan, 47500 Bandar Sunway, Selangor, Malaysia
3 shared publications
Latest Publications
- Open Access
- 16 November 2026
- Published by Wiley in Advanced Science
Mitigation of Interfacial Phonon Scattering in Polyimine/Graphene Composites Through Controllable In Situ Construction of Liquid Crystal Networks
Thermally conductive polymer composites are promising candidates for advanced thermal management. However, their performance is often limited by severe interfacial phonon scattering and low intrinsic thermal conductivity ( λ ) of polymers. Herein, a strategy was proposed for mitigating interfacial phonon scattering via controllable in situ construction of liquid crystal polyimines and their composites with graphene nanoplatelets (GNPs). Ordered liquid crystalline domains with enhanced π–π stacking interactions are in situ introduced into the polyimines by tailoring the ratio of diamine crosslinkers, thereby improving intrinsic λ and interfacial affinity with GNPs. Optimized TD 7 B 3 polyimines exhibit a λ of 0.35 W m −1 K −1 , which is significantly higher than amorphous counterparts. When combined with 50 wt.% GNPs, as‐prepared composite achieves superior in‐plane and out‐of‐plane λ of 35.51 and 6.53 W m −1 K −1 , respectively, along with low thermal resistance of ∼0.70 K In 2 W −1 . Structural characterizations and molecular simulations reveal enhanced performance originates from the formation of ordered laminated structures, strong π–π interfacial interactions, and matched phonon spectra. Furthermore, TD 7 B 3 G 50 composites demonstrate superior thermal stability and heat dissipation capability in LED thermal management. This work provides an effective strategy for designing high‐performance polymer composites by synergistically optimizing intrinsic thermal transport and interfacial phonon coupling.
- 16 November 2026
- Published by Wiley in Advanced Science
Open AccessMitigation of Interfacial Phonon Scattering in Polyimine/Graphene Composites Through Controllable In Situ Construction of Liquid Crystal Networks
Thermally conductive polymer composites are promising candidates for advanced thermal management. However, their performance is often limited by severe interfacial phonon scattering and low intrinsic thermal conductivity ( λ ) of polymers. Herein, a strategy was proposed for mitigating interfacial phonon scattering via controllable in situ construction of liquid crystal polyimines and their composites with graphene nanoplatelets (GNPs). Ordered liquid crystalline domains with enhanced π–π stacking interactions are in situ introduced into the polyimines by tailoring the ratio of diamine crosslinkers, thereby improving intrinsic λ and interfacial affinity with GNPs. Optimized TD 7 B 3 polyimines exhibit a λ of 0.35 W m −1 K −1 , which is significantly higher than amorphous counterparts. When combined with 50 wt.% GNPs, as‐prepared composite achieves superior in‐plane and out‐of‐plane λ of 35.51 and 6.53 W m −1 K −1 , respectively, along with low thermal resistance of ∼0.70 K In 2 W −1 . Structural characterizations and molecular simulations reveal enhanced performance originates from the formation of ordered laminated structures, strong π–π interfacial interactions, and matched phonon spectra. Furthermore, TD 7 B 3 G 50 composites demonstrate superior thermal stability and heat dissipation capability in LED thermal management. This work provides an effective strategy for designing high‐performance polymer composites by synergistically optimizing intrinsic thermal transport and interfacial phonon coupling.
- 8 October 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (47) , e3065392
Environmental Aging Enhances Hydrodynamic Driven Microplastics Piezoelectric Catalytic Decomposition of Organic Pollutants
Microplastics (MPs) are recognized as emerging environmental pollutants. However, their potential role in degrading pollutants under hydrodynamic conditions after environmental aging is frequently overlooked. In this study, three common MPs including polyethylene (PE), polypropylene (PP), and polystyrene (PS) were investigated for their ability to enhance atrazine (ATZ) degradation after UV aging and under ultrasonic hydrodynamic treatment. Our findings demonstrate that environmental aging significantly boosts the piezoelectric catalytic activity of MPs, consequently accelerating pollutant degradation. UV‐aged polypropylene (PP‐8) exhibited the highest performance, achieving a piezoelectric catalytic degradation rate constant ( k ═ 0.246 min −1 ), which is 22.36‐fold higher than that of pristine PP ( k ═ 0.011 min −1 ). Mechanistic studies revealed that polar carbonyl (C ═ O) functional groups formed during aging play a pivotal role for improving the piezoelectric properties of MPs. This enhancement promotes hydroxyl radicals (·OH) generation from water molecules, which drives pollutant degradation. Furthermore, this effect was found to be general as it was consistently observed in systems using MPs aged by different environmental processes (high temperature, mechanical wear, and Fenton oxidation) and exposed to various hydrodynamic conditions (oscillation and cavitation). This study provides new insights into the self‐purification mechanisms of organic pollutants in natural environments.
- 8 October 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (47) , e3065392
Environmental Aging Enhances Hydrodynamic Driven Microplastics Piezoelectric Catalytic Decomposition of Organic Pollutants
Microplastics (MPs) are recognized as emerging environmental pollutants. However, their potential role in degrading pollutants under hydrodynamic conditions after environmental aging is frequently overlooked. In this study, three common MPs including polyethylene (PE), polypropylene (PP), and polystyrene (PS) were investigated for their ability to enhance atrazine (ATZ) degradation after UV aging and under ultrasonic hydrodynamic treatment. Our findings demonstrate that environmental aging significantly boosts the piezoelectric catalytic activity of MPs, consequently accelerating pollutant degradation. UV‐aged polypropylene (PP‐8) exhibited the highest performance, achieving a piezoelectric catalytic degradation rate constant ( k ═ 0.246 min −1 ), which is 22.36‐fold higher than that of pristine PP ( k ═ 0.011 min −1 ). Mechanistic studies revealed that polar carbonyl (C ═ O) functional groups formed during aging play a pivotal role for improving the piezoelectric properties of MPs. This enhancement promotes hydroxyl radicals (·OH) generation from water molecules, which drives pollutant degradation. Furthermore, this effect was found to be general as it was consistently observed in systems using MPs aged by different environmental processes (high temperature, mechanical wear, and Fenton oxidation) and exposed to various hydrodynamic conditions (oscillation and cavitation). This study provides new insights into the self‐purification mechanisms of organic pollutants in natural environments.
- 8 October 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (47)
Environmental Aging Enhances Hydrodynamic Driven Microplastics Piezoelectric Catalytic Decomposition of Organic Pollutants
Microplastics (MPs) are recognized as emerging environmental pollutants. However, their potential role in degrading pollutants under hydrodynamic conditions after environmental aging is frequently overlooked. In this study, three common MPs including polyethylene (PE), polypropylene (PP), and polystyrene (PS) were investigated for their ability to enhance atrazine (ATZ) degradation after UV aging and under ultrasonic hydrodynamic treatment. Our findings demonstrate that environmental aging significantly boosts the piezoelectric catalytic activity of MPs, consequently accelerating pollutant degradation. UV‐aged polypropylene (PP‐8) exhibited the highest performance, achieving a piezoelectric catalytic degradation rate constant ( k ═ 0.246 min −1 ), which is 22.36‐fold higher than that of pristine PP ( k ═ 0.011 min −1 ). Mechanistic studies revealed that polar carbonyl (C ═ O) functional groups formed during aging play a pivotal role for improving the piezoelectric properties of MPs. This enhancement promotes hydroxyl radicals (·OH) generation from water molecules, which drives pollutant degradation. Furthermore, this effect was found to be general as it was consistently observed in systems using MPs aged by different environmental processes (high temperature, mechanical wear, and Fenton oxidation) and exposed to various hydrodynamic conditions (oscillation and cavitation). This study provides new insights into the self‐purification mechanisms of organic pollutants in natural environments.
- 8 October 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (47)
Environmental Aging Enhances Hydrodynamic Driven Microplastics Piezoelectric Catalytic Decomposition of Organic Pollutants
Microplastics (MPs) are recognized as emerging environmental pollutants. However, their potential role in degrading pollutants under hydrodynamic conditions after environmental aging is frequently overlooked. In this study, three common MPs including polyethylene (PE), polypropylene (PP), and polystyrene (PS) were investigated for their ability to enhance atrazine (ATZ) degradation after UV aging and under ultrasonic hydrodynamic treatment. Our findings demonstrate that environmental aging significantly boosts the piezoelectric catalytic activity of MPs, consequently accelerating pollutant degradation. UV‐aged polypropylene (PP‐8) exhibited the highest performance, achieving a piezoelectric catalytic degradation rate constant ( k ═ 0.246 min −1 ), which is 22.36‐fold higher than that of pristine PP ( k ═ 0.011 min −1 ). Mechanistic studies revealed that polar carbonyl (C ═ O) functional groups formed during aging play a pivotal role for improving the piezoelectric properties of MPs. This enhancement promotes hydroxyl radicals (·OH) generation from water molecules, which drives pollutant degradation. Furthermore, this effect was found to be general as it was consistently observed in systems using MPs aged by different environmental processes (high temperature, mechanical wear, and Fenton oxidation) and exposed to various hydrodynamic conditions (oscillation and cavitation). This study provides new insights into the self‐purification mechanisms of organic pollutants in natural environments.
- 8 October 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (60) , 41453-41465
Nanostructured MBene-MOF with interfacial dual active sites for bifunctional electrocatalysis toward coupled ammonia production and glycerol oxidation
A ZIF-67/FeB electrocatalyst with interfacial dual active sites enables efficient electrocatalytic nitrate-to-ammonia conversion, while coupling with the glycerol oxidation in a flow-cell lowers operating voltage with glycerol upgrading.
- 8 October 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (60) , 41453-41465
Nanostructured MBene-MOF with interfacial dual active sites for bifunctional electrocatalysis toward coupled ammonia production and glycerol oxidation
A ZIF-67/FeB electrocatalyst with interfacial dual active sites enables efficient electrocatalytic nitrate-to-ammonia conversion, while coupling with the glycerol oxidation in a flow-cell lowers operating voltage with glycerol upgrading.
- 24 September 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (57) , 39278-39287
Oxygen vacancy-mediated small polaron transport in WO 3 -based heterojunctions for efficient photoelectrochemical water splitting
Synergistic regulation of small polaron transport and interfacial charge separation enables efficient WO 3 -based PEC water splitting.
- 24 September 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (57) , 39278-39287
Oxygen vacancy-mediated small polaron transport in WO 3 -based heterojunctions for efficient photoelectrochemical water splitting
Synergistic regulation of small polaron transport and interfacial charge separation enables efficient WO 3 -based PEC water splitting.
- Open Access
- 18 September 2026
- Published by UK Scientific Publishing Limited in Sustainable Science and Innovation
- Vol. 1 (1)
From Waste to Resource: Recent Trends in Plastic Recycling and Upcycling
Only an estimated 9% of all plastic ever manufactured has been recycled, and the remainder persists in landfills, oceans, and, increasingly, in the human body as micro- and nanoplastics. Closing this loop demands chemistry that goes beyond shredding and remelting. This review surveys the mechanistically distinct strategies now converging on the plastic waste problem: classical end-of-life treatments and their limits; selective depolymerization, catalytic bond-breaking, and direct polymer functionalization; photochemical and electrochemical upcycling, including established semiconductor and molecular photocatalytic systems, together with a prospective metal-free, defect-engineered carbon nitride (O-VN-CN) platform developed by our group for ambient-condition processing of mixed plastic waste; enzymatic and chemo-biological recycling, exemplified by industrial PET biorecycling; and, on the front end, the molecular design of plastics whose recyclability is programmed into the monomer itself. Ten reversible and cleavable bond chemistries are organized into five design principles—reversible dynamic bonds, cleavable weak links, bidirectional controlled bonds, self-immolative cascades, and weak-C–C strategies—including a shuttle-controlled, bidirectional disulfide metathesis platform that enables clean, catalyst-free recovery of high-performance thermosets such as disulfide-doped polydicyclopentadiene. Together, these advances mark a decisive shift from managing plastic waste after disposal to engineering circularity by design, and this review closes by outlining the catalytic, biological, and materials-design frontiers most likely to determine whether that shift can be achieved at industrial scale.
- 18 September 2026
- Published by UK Scientific Publishing Limited in Sustainable Science and Innovation
- Vol. 1 (1)
Open AccessFrom Waste to Resource: Recent Trends in Plastic Recycling and Upcycling
Only an estimated 9% of all plastic ever manufactured has been recycled, and the remainder persists in landfills, oceans, and, increasingly, in the human body as micro- and nanoplastics. Closing this loop demands chemistry that goes beyond shredding and remelting. This review surveys the mechanistically distinct strategies now converging on the plastic waste problem: classical end-of-life treatments and their limits; selective depolymerization, catalytic bond-breaking, and direct polymer functionalization; photochemical and electrochemical upcycling, including established semiconductor and molecular photocatalytic systems, together with a prospective metal-free, defect-engineered carbon nitride (O-VN-CN) platform developed by our group for ambient-condition processing of mixed plastic waste; enzymatic and chemo-biological recycling, exemplified by industrial PET biorecycling; and, on the front end, the molecular design of plastics whose recyclability is programmed into the monomer itself. Ten reversible and cleavable bond chemistries are organized into five design principles—reversible dynamic bonds, cleavable weak links, bidirectional controlled bonds, self-immolative cascades, and weak-C–C strategies—including a shuttle-controlled, bidirectional disulfide metathesis platform that enables clean, catalyst-free recovery of high-performance thermosets such as disulfide-doped polydicyclopentadiene. Together, these advances mark a decisive shift from managing plastic waste after disposal to engineering circularity by design, and this review closes by outlining the catalytic, biological, and materials-design frontiers most likely to determine whether that shift can be achieved at industrial scale.
- Open Access
- 16 September 2026
- Published by UK Scientific Publishing Limited in Sustainable Science and Innovation
- Vol. 1 (1)
Metal-Free Photoredox Upcycling of Chemically Diverse Plastics and Mixed Plastics into High-Value Chemicals under Visible Light
The growing accumulation of plastic waste poses a major global environmental challenge, yet existing chemical recycling technologies remain constrained by high energy demand, narrow substrate scope, intolerance to poly(vinyl chloride) (PVC) and mixed plastic waste, and heavy reliance on precious, toxic, or base-metal catalysts. Here, we report a metal-free, defect-engineered polymeric carbon nitride photocatalyst containing tri-coordinated nitrogen vacancies and oxygen-linked heptazine units (O-VN-CN) that confronts this challenge under visible light and ambient conditions. Our developed O-VN-CN catalyst converts chemically distinct commodity plastics, including aliphatic polypropylene (PP), aromatic polystyrene (PS), and halogenated PVC, both individually and as a ternary mixture, into value-added chemicals under a unified set of reaction conditions without substrate-specific modification. Notably, the co-upcycling of ternary PP/PS/PVC mixture represents, to the best of our knowledge, the first demonstration of photocatalytic upcycling of mixed plastics using a recyclable, metal-free heterogeneous photocatalyst under ambient conditions. Mechanistic and computational investigations reveal that the co-existence of tri-coordinated nitrogen vacancies and oxygen-linked heptazine units creates shallow electron-trapping states that enhance visible light absorption, promote charge separation and interfacial transfer, and facilitate the activation of O2 to •O2⁻ that actively participates in the C–C bond cleavage and breaks down the polymer chains into value-added small molecules. Synthesized from cheap, abundant urea and ammonium acetate by simple calcination, the catalyst offers a potentially scalable, green and economically compelling route to closing the plastics carbon loop.
- 16 September 2026
- Published by UK Scientific Publishing Limited in Sustainable Science and Innovation
- Vol. 1 (1)
Open AccessMetal-Free Photoredox Upcycling of Chemically Diverse Plastics and Mixed Plastics into High-Value Chemicals under Visible Light
The growing accumulation of plastic waste poses a major global environmental challenge, yet existing chemical recycling technologies remain constrained by high energy demand, narrow substrate scope, intolerance to poly(vinyl chloride) (PVC) and mixed plastic waste, and heavy reliance on precious, toxic, or base-metal catalysts. Here, we report a metal-free, defect-engineered polymeric carbon nitride photocatalyst containing tri-coordinated nitrogen vacancies and oxygen-linked heptazine units (O-VN-CN) that confronts this challenge under visible light and ambient conditions. Our developed O-VN-CN catalyst converts chemically distinct commodity plastics, including aliphatic polypropylene (PP), aromatic polystyrene (PS), and halogenated PVC, both individually and as a ternary mixture, into value-added chemicals under a unified set of reaction conditions without substrate-specific modification. Notably, the co-upcycling of ternary PP/PS/PVC mixture represents, to the best of our knowledge, the first demonstration of photocatalytic upcycling of mixed plastics using a recyclable, metal-free heterogeneous photocatalyst under ambient conditions. Mechanistic and computational investigations reveal that the co-existence of tri-coordinated nitrogen vacancies and oxygen-linked heptazine units creates shallow electron-trapping states that enhance visible light absorption, promote charge separation and interfacial transfer, and facilitate the activation of O2 to •O2⁻ that actively participates in the C–C bond cleavage and breaks down the polymer chains into value-added small molecules. Synthesized from cheap, abundant urea and ammonium acetate by simple calcination, the catalyst offers a potentially scalable, green and economically compelling route to closing the plastics carbon loop.
- Open Access
- 16 September 2026
- Published by UK Scientific Publishing Limited in Sustainable Science and Innovation
- Vol. 1 (1)
Metal-Free Photoredox Upcycling of Chemically Diverse Plastics and Mixed Plastics into High-Value Chemicals under Visible Light
The growing accumulation of plastic waste poses a major global environmental challenge, yet existing chemical recycling technologies remain constrained by high energy demand, narrow substrate scope, intolerance to poly(vinyl chloride) (PVC) and mixed plastic waste, and heavy reliance on precious, toxic, or base-metal catalysts. Here, we report a metal-free, defect-engineered polymeric carbon nitride photocatalyst containing tri-coordinated nitrogen vacancies and oxygen-linked heptazine units (O-VN-CN) that confronts this challenge under visible light and ambient conditions. Our developed O-VN-CN catalyst converts chemically distinct commodity plastics, including aliphatic polypropylene (PP), aromatic polystyrene (PS), and halogenated PVC, both individually and as a ternary mixture, into value-added chemicals under a unified set of reaction conditions without substrate-specific modification. Notably, the co-upcycling of ternary PP/PS/PVC mixture represents, to the best of our knowledge, the first demonstration of photocatalytic upcycling of mixed plastics using a recyclable, metal-free heterogeneous photocatalyst under ambient conditions. Mechanistic and computational investigations reveal that the co-existence of tri-coordinated nitrogen vacancies and oxygen-linked heptazine units creates shallow electron-trapping states that enhance visible light absorption, promote charge separation and interfacial transfer, and facilitate the activation of O2 to •O2⁻ that actively participates in the C–C bond cleavage and breaks down the polymer chains into value-added small molecules. Synthesized from cheap, abundant urea and ammonium acetate by simple calcination, the catalyst offers a potentially scalable, green and economically compelling route to closing the plastics carbon loop.
- 16 September 2026
- Published by UK Scientific Publishing Limited in Sustainable Science and Innovation
- Vol. 1 (1)
Open AccessMetal-Free Photoredox Upcycling of Chemically Diverse Plastics and Mixed Plastics into High-Value Chemicals under Visible Light
The growing accumulation of plastic waste poses a major global environmental challenge, yet existing chemical recycling technologies remain constrained by high energy demand, narrow substrate scope, intolerance to poly(vinyl chloride) (PVC) and mixed plastic waste, and heavy reliance on precious, toxic, or base-metal catalysts. Here, we report a metal-free, defect-engineered polymeric carbon nitride photocatalyst containing tri-coordinated nitrogen vacancies and oxygen-linked heptazine units (O-VN-CN) that confronts this challenge under visible light and ambient conditions. Our developed O-VN-CN catalyst converts chemically distinct commodity plastics, including aliphatic polypropylene (PP), aromatic polystyrene (PS), and halogenated PVC, both individually and as a ternary mixture, into value-added chemicals under a unified set of reaction conditions without substrate-specific modification. Notably, the co-upcycling of ternary PP/PS/PVC mixture represents, to the best of our knowledge, the first demonstration of photocatalytic upcycling of mixed plastics using a recyclable, metal-free heterogeneous photocatalyst under ambient conditions. Mechanistic and computational investigations reveal that the co-existence of tri-coordinated nitrogen vacancies and oxygen-linked heptazine units creates shallow electron-trapping states that enhance visible light absorption, promote charge separation and interfacial transfer, and facilitate the activation of O2 to •O2⁻ that actively participates in the C–C bond cleavage and breaks down the polymer chains into value-added small molecules. Synthesized from cheap, abundant urea and ammonium acetate by simple calcination, the catalyst offers a potentially scalable, green and economically compelling route to closing the plastics carbon loop.
- Open Access
- 23 August 2026
- Published by Elsevier in Applied Catalysis B: Environment and Energy
- Vol. 401
Scalable photocatalyst-coated membrane with two-step photoexcitation charge transfer for ambient solar-driven overall water splitting
- 23 August 2026
- Published by Elsevier in Applied Catalysis B: Environment and Energy
- Vol. 401
Open AccessScalable photocatalyst-coated membrane with two-step photoexcitation charge transfer for ambient solar-driven overall water splitting
- Open Access
- 31 July 2026
- Published by Wiley in Advanced Energy Materials
Simultaneous Electronic and Crystallographic Modulation of Cs 3 Bi 2 Br 9 by Single‐Element Sn Substitution for Enhanced CO 2 Photoreduction
The photocatalytic conversion of CO 2 into value‐added fuels offers a sustainable route to mitigate carbon emissions while storing solar energy. Lead‐free halide perovskites have recently emerged as promising photocatalysts due to their highly tunable electronic structures and strong light‐harvesting capabilities. However, their performance is often limited by inefficient charge separation and transfer. Herein, we demonstrate that aliovalent Sn 2+ substitution into layered Cs 3 Bi 2 Br 9 enables simultaneous modulation of the crystallographic and electronic structure. Combined experimental characterizations and simulation studies reveal that Sn 2+ substitution induces lattice contraction and promotes bromine vacancy formation as a charge‐compensation mechanism. These concurrent structural changes drive electronic redistribution and introduce shallow trap states, thereby improving charge carrier dynamics. As a result of these synergistic effects, the optimized Sn 2+ ‐doped Cs 3 Bi 2 Br 9 exhibits a 3.4‐fold enhancement in CH 4 yield compared to the pristine material, achieving a yield of 8.91 µmol·g −1 under continuous visible‐light irradiation for 4 h. This work demonstrates that aliovalent B‐site substitution is an effective strategy for engineering lattice distortion and vacancy chemistry to enhance charge utilization and photocatalytic selectivity in lead‐free halide perovskites.
- 31 July 2026
- Published by Wiley in Advanced Energy Materials
Open AccessSimultaneous Electronic and Crystallographic Modulation of Cs 3 Bi 2 Br 9 by Single‐Element Sn Substitution for Enhanced CO 2 Photoreduction
The photocatalytic conversion of CO 2 into value‐added fuels offers a sustainable route to mitigate carbon emissions while storing solar energy. Lead‐free halide perovskites have recently emerged as promising photocatalysts due to their highly tunable electronic structures and strong light‐harvesting capabilities. However, their performance is often limited by inefficient charge separation and transfer. Herein, we demonstrate that aliovalent Sn 2+ substitution into layered Cs 3 Bi 2 Br 9 enables simultaneous modulation of the crystallographic and electronic structure. Combined experimental characterizations and simulation studies reveal that Sn 2+ substitution induces lattice contraction and promotes bromine vacancy formation as a charge‐compensation mechanism. These concurrent structural changes drive electronic redistribution and introduce shallow trap states, thereby improving charge carrier dynamics. As a result of these synergistic effects, the optimized Sn 2+ ‐doped Cs 3 Bi 2 Br 9 exhibits a 3.4‐fold enhancement in CH 4 yield compared to the pristine material, achieving a yield of 8.91 µmol·g −1 under continuous visible‐light irradiation for 4 h. This work demonstrates that aliovalent B‐site substitution is an effective strategy for engineering lattice distortion and vacancy chemistry to enhance charge utilization and photocatalytic selectivity in lead‐free halide perovskites.