Sheng Xu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sheng Xu has a total of 58 co-authors. Here are the top co-authors by number of shared publications:
- Hong-Yan Zeng
College of Chemical Engineering, Xiangtan University, Xiangtan, 411105, Hunan, China
8 shared publications Chi-Jie Ding
School of Chemical Engineering, Xiangtan University, Xiangtan 411105, Hunan, China
5 shared publicationsJie Hu
College of Chemical Engineering, Xiangtan University, Xiangtan, Hunan 411105, China
4 shared publicationsKun Wu
School of Chemical Engineering, Xiangtan University, Xiangtan 411105, Hunan, China
4 shared publicationsJian Jian
College of Chemistry and Chemical Engineering, Hunan University of Science and Technology, Xiangtan, Hunan 411105, China
3 shared publicationsLei Wang
School of Chemical Engineering, Xiangtan University, Xiangtan 411105, Hunan, China
3 shared publications
Latest Publications
- 9 October 2026
- Published by Wiley in Journal of Vinyl and Additive Technology
Multi‐Core‐Shell Carbon Microsphere@Layered Double Hydroxide@Tea Polyphenol Structure with Synergistic Charring and Interfacial Compatibility for Flame‐Retardant and Smoke‐Suppressant Polypropylene
The inherent flammability and high smoke release of polypropylene (PP) have limited its widespread application in household appliances, automobiles, and building pipelines. To address these limitations, using carbon microspheres derived from acid‐washed calcium carbide furnace dust (HCD) as the core and sequential coatings of NiCo‐layered double hydroxide (LDH) and tea polyphenols (TP), a multi‐core‐shell flame retardant (HCD@LDH@TP) was conducted. Incorporating 10 wt% HCD@LDH@TP into PP enabled the composites to attain a UL‐94 V‐1 rating, together with a limiting oxygen index of 26.7%. Compared to neat PP, it also exhibited a 38.1% reduction in peak heat release rate (pHRR) and a 39.3% decrease in peak smoke production rate (pSPR). HCD@LDH@TP employs HCD as a carbon skeleton, synergistically building a strong char layer through LDH‐catalyzed charring and TP‐induced crosslinking densification, while the gas‐phase dilution effect further contributes to efficient flame retardancy. Moreover, the PP/HCD@LDH@TP composites preserved acceptable mechanical integrity for practical applications, with a tensile strength of 17.3 MPa and an elongation at break of 61%. This work offers a sustainable route to convert hazardous industrial dust into effective flame‐retardant additives for PP composites in automotive, appliance, and pipeline applications.
- 9 October 2026
- Published by Wiley in Journal of Vinyl and Additive Technology
Multi‐Core‐Shell Carbon Microsphere@Layered Double Hydroxide@Tea Polyphenol Structure with Synergistic Charring and Interfacial Compatibility for Flame‐Retardant and Smoke‐Suppressant Polypropylene
The inherent flammability and high smoke release of polypropylene (PP) have limited its widespread application in household appliances, automobiles, and building pipelines. To address these limitations, using carbon microspheres derived from acid‐washed calcium carbide furnace dust (HCD) as the core and sequential coatings of NiCo‐layered double hydroxide (LDH) and tea polyphenols (TP), a multi‐core‐shell flame retardant (HCD@LDH@TP) was conducted. Incorporating 10 wt% HCD@LDH@TP into PP enabled the composites to attain a UL‐94 V‐1 rating, together with a limiting oxygen index of 26.7%. Compared to neat PP, it also exhibited a 38.1% reduction in peak heat release rate (pHRR) and a 39.3% decrease in peak smoke production rate (pSPR). HCD@LDH@TP employs HCD as a carbon skeleton, synergistically building a strong char layer through LDH‐catalyzed charring and TP‐induced crosslinking densification, while the gas‐phase dilution effect further contributes to efficient flame retardancy. Moreover, the PP/HCD@LDH@TP composites preserved acceptable mechanical integrity for practical applications, with a tensile strength of 17.3 MPa and an elongation at break of 61%. This work offers a sustainable route to convert hazardous industrial dust into effective flame‐retardant additives for PP composites in automotive, appliance, and pipeline applications.
- 25 September 2024
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 280 (Pt 3) , 136028
Urchin-like NiCo-based bimetallic hydroxide decorated with DOPO as highly hydrophobic flame retardant for remarkably reducing fire hazard of poly (L-lactic acid)
- 25 September 2024
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 280 (Pt 3) , 136028
Urchin-like NiCo-based bimetallic hydroxide decorated with DOPO as highly hydrophobic flame retardant for remarkably reducing fire hazard of poly (L-lactic acid)
- 24 September 2024
- Published by Springer Nature in Journal of Materials Science
- Vol. 59 (37) , 17747-17768
Fabrication of nickel–cobalt bimetallic hydroxide modified by chitosan and benzenephosphonic acid with high catalytic carbonization as a novel flame retardant for polylactic acid
- 24 September 2024
- Published by Springer Nature in Journal of Materials Science
- Vol. 59 (37) , 17747-17768
Fabrication of nickel–cobalt bimetallic hydroxide modified by chitosan and benzenephosphonic acid with high catalytic carbonization as a novel flame retardant for polylactic acid
- 14 July 2022
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 61 (29) , 11387-11398
Construction of Ultrafine Ag2S NPs Anchored onto 3D Network Rodlike Bi2SiO5 and Insight into the Photocatalytic Mechanism
A novel three-dimensional (3D) network rodlike Ag2S/Bi2SiO5 photocatalyst with a p-n heterostructure composed of ultrafine Ag2S nanoparticles (NPs) and Bi2SiO5 nanosheets was prepared using an anionic self-regulation strategy by a two-step hydrothermal process. The architecture facilitated the efficient transfer and separation of photogenerated electron-hole pairs. The optimal Ag2S/Bi2SiO5 composite (ABSO0.10) exhibited an excellent reduction activity (93.5% Cr(VI) removal in wastewater containing 50 mg·L-1 Cr(VI) within 90 min under visible light), which was about 11.2 and 25.6 times higher than that of the pristine Ag2S and virgin Bi2SiO5, respectively. Assisted by experiments and density functional theory (DFT) calculations, a possible photocatalytic mechanism for Cr(VI) reduction over the Ag2S/Bi2SiO5 composite under visible-light irradiation was proposed.
- 14 July 2022
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 61 (29) , 11387-11398
Construction of Ultrafine Ag2S NPs Anchored onto 3D Network Rodlike Bi2SiO5 and Insight into the Photocatalytic Mechanism
A novel three-dimensional (3D) network rodlike Ag2S/Bi2SiO5 photocatalyst with a p-n heterostructure composed of ultrafine Ag2S nanoparticles (NPs) and Bi2SiO5 nanosheets was prepared using an anionic self-regulation strategy by a two-step hydrothermal process. The architecture facilitated the efficient transfer and separation of photogenerated electron-hole pairs. The optimal Ag2S/Bi2SiO5 composite (ABSO0.10) exhibited an excellent reduction activity (93.5% Cr(VI) removal in wastewater containing 50 mg·L-1 Cr(VI) within 90 min under visible light), which was about 11.2 and 25.6 times higher than that of the pristine Ag2S and virgin Bi2SiO5, respectively. Assisted by experiments and density functional theory (DFT) calculations, a possible photocatalytic mechanism for Cr(VI) reduction over the Ag2S/Bi2SiO5 composite under visible-light irradiation was proposed.
- 10 May 2022
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 4 (6) , 4166-4178
Dual Modification of Layered Double Hydroxide by Phosphonitrilic Chloride Trimer and Aniline for Enhancing the Flame Retardancy of Polypropylene
- 10 May 2022
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 4 (6) , 4166-4178
Dual Modification of Layered Double Hydroxide by Phosphonitrilic Chloride Trimer and Aniline for Enhancing the Flame Retardancy of Polypropylene
- 23 March 2022
- Published by IOP Publishing in Nanotechnology
- Vol. 33 (24) , 245703
Construction of NiCoZnS materials with controllable morphology for high-performance supercapacitors
A facile two-step hydrothermal approach with post-sulfurization treatment was put forward to construct the mixed transition metal sulfide (NiCoZnS) with a high electrochemical performance. The different morphologies of NiCoZnS materials were successfully fabricated by adjusted the Ni/Co molar ratio of the NiCoZn(OH)F precursor. Moreover, the in situ phase transformation from the NiCoZn(OH)F phase to Zn 0.76 Co 0.24 S and NiCo 2 S 4 phases and lattice defects via the S 2− ion-exchange were determined by x-ray diffractometer, transmission electron microscopy and x-ray photoelectron spectroscopy techniques, which improved electric conductivity and interfacial active sites of the NiCoZnS, and so promoted the reaction kinetics. Significantly, the urchin-like NiCoZnS 1/1 prepared at the Ni/Co molar ratio of 1.0 exhibited promising electrochemical performances with high capacitance and excellent cycling stability. Furthermore, the asymmetric device (NiCoZnS//AC) using NiCoZnS 1/1 as the positive electrode had excellent supercapacitor performances with an energy density of 57.8 Wh·kg –1 at a power density of 750 W·kg –1 as well as a long cycle life (79.2% capacity retention after 10 000 cycles), indicating the potential application in high-performance supercapacitors.
- 23 March 2022
- Published by IOP Publishing in Nanotechnology
- Vol. 33 (24) , 245703
Construction of NiCoZnS materials with controllable morphology for high-performance supercapacitors
A facile two-step hydrothermal approach with post-sulfurization treatment was put forward to construct the mixed transition metal sulfide (NiCoZnS) with a high electrochemical performance. The different morphologies of NiCoZnS materials were successfully fabricated by adjusted the Ni/Co molar ratio of the NiCoZn(OH)F precursor. Moreover, the in situ phase transformation from the NiCoZn(OH)F phase to Zn 0.76 Co 0.24 S and NiCo 2 S 4 phases and lattice defects via the S 2− ion-exchange were determined by x-ray diffractometer, transmission electron microscopy and x-ray photoelectron spectroscopy techniques, which improved electric conductivity and interfacial active sites of the NiCoZnS, and so promoted the reaction kinetics. Significantly, the urchin-like NiCoZnS 1/1 prepared at the Ni/Co molar ratio of 1.0 exhibited promising electrochemical performances with high capacitance and excellent cycling stability. Furthermore, the asymmetric device (NiCoZnS//AC) using NiCoZnS 1/1 as the positive electrode had excellent supercapacitor performances with an energy density of 57.8 Wh·kg –1 at a power density of 750 W·kg –1 as well as a long cycle life (79.2% capacity retention after 10 000 cycles), indicating the potential application in high-performance supercapacitors.
- 3 November 2021
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (10) , 51771
Fabrication of an novel NiCo‐based bimetallic hydroxide encapsulated with polyphosphazene with simultaneously improved the flame retardancy and smoke suppression for polypropylene
The polyphosphazene (PZN) with dual functions of “surface modifier” and “flame‐retarded synergistic agent” was introduced as the “shell” in order to improve the compatibility and flame retardancy property of NiCo‐based bimetallic hydroxide (NiCo‐BH). In this study, a novel core‐shell nanostructures flame retardants (PZN@NiCo‐BH) was synthesized, the resulting PZN@NiCo‐BH was further incorporated into PP to investigate the mechanical property, flame retardancy and smoke suppression performance. Chemical structure and morphology of PZN@NiCo‐BH were characterized by XRD, FT‐IR, SEM, TEM, WCA and TG‐DTG, and the results have shown the successful preparation of the well‐designed PZN@NiCo‐BH. Moreover, LOI, UL‐94 and cone calorimetry measurements results further confirmed the superb flame retardancy and smoke suppression of the synthesized PP/PZN@NiCo‐BH composites with a LOI value of 29.5% in the UL‐94 V‐0 rating, and 56.3% reduction in total smoke production (TSP). Meanwhile, based on the analysis of the combustion residues, possible mechanism of flame retardancy was also proposed.
- 3 November 2021
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (10) , 51771
Fabrication of an novel NiCo‐based bimetallic hydroxide encapsulated with polyphosphazene with simultaneously improved the flame retardancy and smoke suppression for polypropylene
The polyphosphazene (PZN) with dual functions of “surface modifier” and “flame‐retarded synergistic agent” was introduced as the “shell” in order to improve the compatibility and flame retardancy property of NiCo‐based bimetallic hydroxide (NiCo‐BH). In this study, a novel core‐shell nanostructures flame retardants (PZN@NiCo‐BH) was synthesized, the resulting PZN@NiCo‐BH was further incorporated into PP to investigate the mechanical property, flame retardancy and smoke suppression performance. Chemical structure and morphology of PZN@NiCo‐BH were characterized by XRD, FT‐IR, SEM, TEM, WCA and TG‐DTG, and the results have shown the successful preparation of the well‐designed PZN@NiCo‐BH. Moreover, LOI, UL‐94 and cone calorimetry measurements results further confirmed the superb flame retardancy and smoke suppression of the synthesized PP/PZN@NiCo‐BH composites with a LOI value of 29.5% in the UL‐94 V‐0 rating, and 56.3% reduction in total smoke production (TSP). Meanwhile, based on the analysis of the combustion residues, possible mechanism of flame retardancy was also proposed.