Adylkhan Talgatovich Kibishov
Adylkhan Talgatovich Kibishov has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Gulenay Alevay Kilic
Electrical and Energy Department, Yalova Vocational School, Yalova University, 77200 Yalova, Türkiye
2 shared publications - Naci Genc
Department of Electrical and Electronics Engineering, Engineering Faculty, Yalova University, Yalova, Trkiye
2 shared publications - Nassim Rustamov
Khoja Akhmet Yassawi International Kazakh-Turkish University
2 shared publications - Akylbek Kairatbekovich Meirbekov
PhD, Associate Professor, International University of Tourism and Hospitality, Turkestan, Kazakhstan
1 shared publication - Alfiya Bashirova
Tashkent State Transport University
1 shared publication - Botagoz Talgatovna Kerimbayeva
K. Zhubanov Aktobe Regional University, Aktobe, Kazakhstan
1 shared publication
Latest Publications
- Open Access
- 22 December 2025
- Published by JVE International Ltd. in Vibroengineering PROCEDIA
- Vol. 60, 650-656
The technology of non-stop passage of high-speed passenger and freight trains on double-track sections and its impact on operational performance
Currently, a mixed system of high-speed passenger and freight trains has been implemented on the railways of Uzbekistan. During the movement of high-speed passenger trains on double-track main line sections, the movement of freight trains at all stations and segments is temporarily suspended for a specific period. From this perspective, in the present time, the suspension of freight train traffic is leading to numerous technical and economic expenses. In this article, based on experimental runs using the technology of passing freight trains without stopping, train movement schedules have been drawn up, and train operations have been organized without unnecessary stops. This research paper provides a restructured overview of the introduction and practical implementation of non-stop train operation technology for double-track railway lines where both high-speed passenger and freight trains operate simultaneously. Using real operational schedules, comparative experimental charts were developed to evaluate the new approach. The outcomes of this analysis demonstrate how the proposed technology influences efficiency and key performance indicators of train movements. A regression-based analytical model was also constructed to determine the relation between freight train waiting time and average section speed, ensuring reliability through statistical verification. Furthermore, the application of innovative solutions and technologies mentioned in this article to sections of high-speed highways creates an opportunity to increase transport transit potential and improve economic indicators.
- 22 December 2025
- Published by JVE International Ltd. in Vibroengineering PROCEDIA
- Vol. 60, 650-656
Open AccessThe technology of non-stop passage of high-speed passenger and freight trains on double-track sections and its impact on operational performance
Currently, a mixed system of high-speed passenger and freight trains has been implemented on the railways of Uzbekistan. During the movement of high-speed passenger trains on double-track main line sections, the movement of freight trains at all stations and segments is temporarily suspended for a specific period. From this perspective, in the present time, the suspension of freight train traffic is leading to numerous technical and economic expenses. In this article, based on experimental runs using the technology of passing freight trains without stopping, train movement schedules have been drawn up, and train operations have been organized without unnecessary stops. This research paper provides a restructured overview of the introduction and practical implementation of non-stop train operation technology for double-track railway lines where both high-speed passenger and freight trains operate simultaneously. Using real operational schedules, comparative experimental charts were developed to evaluate the new approach. The outcomes of this analysis demonstrate how the proposed technology influences efficiency and key performance indicators of train movements. A regression-based analytical model was also constructed to determine the relation between freight train waiting time and average section speed, ensuring reliability through statistical verification. Furthermore, the application of innovative solutions and technologies mentioned in this article to sections of high-speed highways creates an opportunity to increase transport transit potential and improve economic indicators.
- Open Access
- 22 December 2025
- Published by JVE International Ltd. in Vibroengineering PROCEDIA
- Vol. 60, 142-148
Improving the conditions for securing intermodal units against transverse vibrations and longitudinal displacements along the route
This article focuses on the mathematical modeling of counter-rail transportation processes, examining the parameters of forces acting on vehicles transported on railway platforms. It aims to improve the mathematical model of fastening conditions in counter-rail transportation, considering various factors, and to develop a device for securing vehicles to railway platforms. The shear strength of the fastening device must not be less than the calculated shear forces. By determining the values of individual forces acting on each fastening device, the correct number of fastening points can be established. In addition to the continuous forces acting on the load, centrifugal force during curves and turns is also considered when calculating the fastening devices. The total forces experienced by the fastening devices due to the combined effects of “shear” and “holding” forces on the load placed on the platform are determined. Considering that the longitudinal displacement and transverse vibration of vehicles depend on their design, surface characteristics, speed, radius of curvature, and coefficient of friction, the values of individual forces acting on each of the fasteners were calculated.
- 22 December 2025
- Published by JVE International Ltd. in Vibroengineering PROCEDIA
- Vol. 60, 142-148
Open AccessImproving the conditions for securing intermodal units against transverse vibrations and longitudinal displacements along the route
This article focuses on the mathematical modeling of counter-rail transportation processes, examining the parameters of forces acting on vehicles transported on railway platforms. It aims to improve the mathematical model of fastening conditions in counter-rail transportation, considering various factors, and to develop a device for securing vehicles to railway platforms. The shear strength of the fastening device must not be less than the calculated shear forces. By determining the values of individual forces acting on each fastening device, the correct number of fastening points can be established. In addition to the continuous forces acting on the load, centrifugal force during curves and turns is also considered when calculating the fastening devices. The total forces experienced by the fastening devices due to the combined effects of “shear” and “holding” forces on the load placed on the platform are determined. Considering that the longitudinal displacement and transverse vibration of vehicles depend on their design, surface characteristics, speed, radius of curvature, and coefficient of friction, the values of individual forces acting on each of the fasteners were calculated.
- 1 October 2025
- Published by Springer Nature
- p. 113-119
Search for Possible Options for Improving the Organization and Functional Reliability of the Station
- 1 October 2025
- Published by Springer Nature
- p. 113-119
Search for Possible Options for Improving the Organization and Functional Reliability of the Station
- Open Access
- 29 November 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (23) , 11155
Thermal Analysis of Radiation Heat Transfer of Improved Fractal Solar Collectors
This study proposes parabolic dish-based, toroidal-structured fractal solar collectors. The potential of fractal geometry to increase heat transfer and the ability of the parabolic dish to concentrate solar rays form the basis of the proposed design for increasing efficiency. In this study, the thermal and hydrodynamic behaviors of the proposed 3-row, 4-row, and 5-row parabolic collectors were investigated comprehensively. Using theoretical modeling and experimental results, the performances of the proposed parabolic dish-based toroidal fractal solar collectors were evaluated and compared via numerical simulation methods. After the experimental studies of the 3-row toroidal fractal collector, the analysis studies were completed using the ANSYS-Fluent program. Then, simulations were carried out for other toroidal solar collectors using the results of these experimental studies. As a result of the converging numerical analyses, the radiative, hydrodynamic, and thermal analysis results of the toroidal absorbers in 3-row, 4-row, and 5-row structures integrated with the parabolic dish were compared. In the temperature distribution analysis, it was observed that the parabolic dish effectively focuses on the sun rays and provides a gradual temperature increase of approximately 21 K for the fractal collector. It is observed that 96.84% convergence was achieved between the experimental and numerical results.
- 29 November 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (23) , 11155
Open AccessThermal Analysis of Radiation Heat Transfer of Improved Fractal Solar Collectors
This study proposes parabolic dish-based, toroidal-structured fractal solar collectors. The potential of fractal geometry to increase heat transfer and the ability of the parabolic dish to concentrate solar rays form the basis of the proposed design for increasing efficiency. In this study, the thermal and hydrodynamic behaviors of the proposed 3-row, 4-row, and 5-row parabolic collectors were investigated comprehensively. Using theoretical modeling and experimental results, the performances of the proposed parabolic dish-based toroidal fractal solar collectors were evaluated and compared via numerical simulation methods. After the experimental studies of the 3-row toroidal fractal collector, the analysis studies were completed using the ANSYS-Fluent program. Then, simulations were carried out for other toroidal solar collectors using the results of these experimental studies. As a result of the converging numerical analyses, the radiative, hydrodynamic, and thermal analysis results of the toroidal absorbers in 3-row, 4-row, and 5-row structures integrated with the parabolic dish were compared. In the temperature distribution analysis, it was observed that the parabolic dish effectively focuses on the sun rays and provides a gradual temperature increase of approximately 21 K for the fractal collector. It is observed that 96.84% convergence was achieved between the experimental and numerical results.
- Open Access
- 24 October 2024
- Published by MDPI AG in Preprints.org
Thermal Analysis of Radiation Heat Transfer of an Improved Fractal Solar Collectors
This study proposes parabolic dish-based toroidal structured fractal solar collectors. The potential of fractal geometry to increase heat transfer and the ability of the parabolic dish to concentrate solar rays form the basis of the proposed design for increasing the efficiency. In the study, the thermal and hydrodynamic behaviors of the proposed 3-row, 4-row and 5-row parabolic collectors were investigated comprehensively. Using theoretical modeling and experimental results, the performances of the proposed parabolic dish-based toroidal fractal solar collectors were evaluated and compared via numerical simulation methods. After the experimental studies of the 3-row toroidal fractal collector, the analysis studies were completed using the ANSYS-Fluent program. Then, simulations were carried out for other toroidal solar collectors using the results of these experimental studies. As a result of the converging numerical analyzes, the radiative, hydrodynamic and thermal analysis results of the toroidal absorbers in 3-row, 4-row and 5-row structures integrated with the parabolic dish were compared. In the temperature distribution analysis, it was observed that the parabolic dish effectively focuses on the sun rays and provides a gradual temperature increase of approximately 21 K for the fractal collector. It is observed that 96.84% convergence was achieved between the experimental and numerical results.
- 24 October 2024
- Published by MDPI AG in Preprints.org
Open AccessThermal Analysis of Radiation Heat Transfer of an Improved Fractal Solar Collectors
This study proposes parabolic dish-based toroidal structured fractal solar collectors. The potential of fractal geometry to increase heat transfer and the ability of the parabolic dish to concentrate solar rays form the basis of the proposed design for increasing the efficiency. In the study, the thermal and hydrodynamic behaviors of the proposed 3-row, 4-row and 5-row parabolic collectors were investigated comprehensively. Using theoretical modeling and experimental results, the performances of the proposed parabolic dish-based toroidal fractal solar collectors were evaluated and compared via numerical simulation methods. After the experimental studies of the 3-row toroidal fractal collector, the analysis studies were completed using the ANSYS-Fluent program. Then, simulations were carried out for other toroidal solar collectors using the results of these experimental studies. As a result of the converging numerical analyzes, the radiative, hydrodynamic and thermal analysis results of the toroidal absorbers in 3-row, 4-row and 5-row structures integrated with the parabolic dish were compared. In the temperature distribution analysis, it was observed that the parabolic dish effectively focuses on the sun rays and provides a gradual temperature increase of approximately 21 K for the fractal collector. It is observed that 96.84% convergence was achieved between the experimental and numerical results.
- Open Access
- 28 June 2024
- Published by Taylor & Francis in Cogent Education
- Vol. 11 (1)
A network communicative culture for future teachers: development of digital literacy and communicative competence
- 28 June 2024
- Published by Taylor & Francis in Cogent Education
- Vol. 11 (1)
Open AccessA network communicative culture for future teachers: development of digital literacy and communicative competence
- Open Access
- 30 April 2022
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (8 (116)) , 29-37
Creation of a hybrid power plant operating on the basis of a gas turbine engine
This paper considers the issue related to the use of jet gas turbine engines for the generation of thermal and electrical energy, defined as a hybrid energy system powered by biogas. Revealing the main vulnerable points of the use and operation of these systems, it is proposed to use biogas obtained from agricultural, crop and livestock waste as fuel for gas turbine engines. Analyzing the work of gas turbine engines, it reveals not only the technological advantages of using biogas instead of fuel, but also reducing the cost of heat and electric energy obtained by obtaining a productive land biohumus. This will result, firstly, it is especially emphasized, the usefulness of the resulting ground humus as a waste material, when producing biogas as fuel, for the operation of a hybrid energy system operating on the basis of gas turbine engines. Secondly, during the operation of a hybrid power system, it is possible to simultaneously obtain thermal and electrical energy. Thirdly, the low cost of the heat and electric energy received. The following are other useful applications of such a power system. The resulting thermal energy is used for heating the greenhouse, and the electrical energy obtained from the operation of the hybrid power system can be used not only for lighting the premises, but can be used for the needs of the greenhouse. It is shown that the proposed hybrid power system consists of two technological structures. The first design is to obtain fuel in the form of biogas for the operation of gas turbine engines, the second design is the connection of the first design with gas turbine engines. A schematic diagram of the general design of the proposed hybrid power system and the principle of its operation is proposed. The difficulties encountered in the design and operation of such hybrid power systems are noted
- 30 April 2022
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (8 (116)) , 29-37
Open AccessCreation of a hybrid power plant operating on the basis of a gas turbine engine
This paper considers the issue related to the use of jet gas turbine engines for the generation of thermal and electrical energy, defined as a hybrid energy system powered by biogas. Revealing the main vulnerable points of the use and operation of these systems, it is proposed to use biogas obtained from agricultural, crop and livestock waste as fuel for gas turbine engines. Analyzing the work of gas turbine engines, it reveals not only the technological advantages of using biogas instead of fuel, but also reducing the cost of heat and electric energy obtained by obtaining a productive land biohumus. This will result, firstly, it is especially emphasized, the usefulness of the resulting ground humus as a waste material, when producing biogas as fuel, for the operation of a hybrid energy system operating on the basis of gas turbine engines. Secondly, during the operation of a hybrid power system, it is possible to simultaneously obtain thermal and electrical energy. Thirdly, the low cost of the heat and electric energy received. The following are other useful applications of such a power system. The resulting thermal energy is used for heating the greenhouse, and the electrical energy obtained from the operation of the hybrid power system can be used not only for lighting the premises, but can be used for the needs of the greenhouse. It is shown that the proposed hybrid power system consists of two technological structures. The first design is to obtain fuel in the form of biogas for the operation of gas turbine engines, the second design is the connection of the first design with gas turbine engines. A schematic diagram of the general design of the proposed hybrid power system and the principle of its operation is proposed. The difficulties encountered in the design and operation of such hybrid power systems are noted