Han Wei

The inhibition effect and mechanism of cerium tartrate (CeTar) as a pigment in epoxy coating on AA2024-T3 aluminum alloy in 3.5% NaCl solution were studied. Two kinds of coatings were applied on the substrate, including a single-layer epoxy coating with CeTar distributed uniformly and a double-layer coating composed of an inner layer doped with CeTar and an outer layer with no CeTar. The protective performances of the coatings were assessed by a Machu test and an Electrochemical impedance spectroscopy (EIS) technique. The corrosion inhibition mechanism of CeTar in the coating was analyzed with X-ray photoelectron spectroscopy (XPS), inductively coupled plasma mass spectrometry (ICP-MS) and Fourier transform spectroscopy (FTIR). The results show that the addition of CeTar can evidently improve the protective performance of the epoxy coating for a long time (>520 d). This might have relationship with the modification effect on the epoxy coating by cerium salts, and also may be due to the synergistic inhibitory effect by tartrate group and cerium ions on the alloy substrate after their continuous releasing to the coating/alloy interface and forming of a protective film. The double-layer coating provides similar protective properties to the single-layer coating. This suggested that creating a protective film on the aluminum alloy substrate could result in a greater contribution to improving the protection performance of the coating.

Stainless steels (SSs) easily suffer localized corrosion damage, such as pitting corrosion, in mixed solutions of acetic acid and sodium chloride. Currently, few works have been focused on the early stages of the pitting corrosion (metastable pitting corrosion) process of SSs in a chloride-HAc mixture solution. In this work, the effects of acetic acid (HAc) and its concentration on metastable pitting corrosion and the uniform corrosion of 304 SS in 0.6 mol/L NaCl solution were investigated by a slow-scanning potentiodynamic polarization test, scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). The results show that the uniform corrosion rate of 304 SS increases after HAc addition but, with an increase in HAc concentration, the corrosion rate decreases. In the presence of HAc, the metastable pitting potential (E_m) and stable pitting potential (E_b) move negatively, but the number of metastable pits notably decreases. HAc has a promoting action on the growth rate of the metastable pits and facilitates the transition from metastable pits to stable pits. The influence of HAc is related to a decrease in solution pH and the chemical adsorption of HAc.