YLYuning Luo

Yuning Luo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yuning Luo has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Mercury telluride colloidal quantum-dot focal plane array with planar p-n junctions enabled by in situ electric field–activated doping

    by Tianling Qin, Ge Mu, Pengfei Zhao, Yimei Tan, Yanfei Liu, Shuo Zhang, Yuning Luo, Qun Hao, Menglu Chen, Xin Tang

    Colloidal quantum dot (CQD)–based photodetectors are promising alternatives to bulk semiconductor-based detectors to be monolithically integrated with complementary metal-oxide semiconductor readout integrated circuits avoiding high-cost epitaxial growth methods and complicated flip-bonding processes. To date, photovoltaic (PV) single-pixel detectors have led to the best performance with background-limit infrared photodetection performance. However, the nonuniform and uncontrollable doping methods and complex device configuration restrict the focal plane array (FPA) imagers to operate in PV mode. Here, we propose a controllable in situ electric field–activated doping method to construct lateral p-n junctions in the short-wave infrared (SWIR) mercury telluride (HgTe) CQD–based photodetectors with a simple planar configuration. The planar p-n junction FPA imagers with 640 × 512 pixels (15-μm pixel pitch) are fabricated and exhibit substantially improved performance compared with photoconductor imagers before activation. High-resolution SWIR infrared imaging is demonstrated with great potential for various applications including semiconductor inspection, food safety, and chemical analysis.


  • Open Access

    Megapixel large-format colloidal quantum-dot infrared imagers with resonant-cavity enhanced photoresponse

    by Yuning Luo, Yimei Tan, Cheng Bi, Shuo Zhang, Xiaomeng Xue, Menglu Chen, Qun Hao, Yanfei Liu, Xin Tang

    Infrared imaging is extensively explored due to its unique properties of high atmospheric transmission and temperature-dependent emission. Unfortunately, the current epitaxial infrared materials suffer from a complicated fabrication process and low production yield, which hinders the further development of infrared imaging for civilian applications. As an alternative to epitaxial semiconductors, the wide spectral tunability and optical versatility of colloidal quantum dots (CQDs) have provided a promising route for infrared detection. Here, we demonstrate an infrared imager that integrates HgTe CQDs with complementary metal-oxide-semiconductor (CMOS) readout integrated circuits. Moreover, the underlying metal contacts and passivation layer of the CMOS chip play a role as an in-pixel resonant-cavity , which enhances the absorption of the CQDs film. The CQDs imager exhibits a detectivity of 2.8 × 1010 Jones, an external quantum efficiency of 14%, and an operable pixel factor of over 99.99% for a cut-off wavelength of around 2 µm at room-temperature. With a large-format (1280 × 1024 pixels2) and a small pixel pitch of 15 µm, the resolution of the imager can reach 40 line pairs per millimeter (lp/mm). The performance of the CQDs imager is demonstrated by infrared imaging.


  • Open Access

    Band-engineered dual-band visible and short-wave infrared photodetector with metal chalcogenide colloidal quantum dots

    by Pengfei Zhao, Tianling Qin, Ge Mu, Shuo Zhang, Yuning Luo, Menglu Chen, Xin Tang

    Dual-band photodetectors have attracted significant attention because of their potential in optical communication, biochemical detection, and environmental monitoring. Colloidal quantum dots (CQDs) are promising materials for dual-band photodetectors because of their size-tunable bandgaps with wide spectral tunability and easy solution processability. Here, we propose a dual-band visible (VIS) and short-wave infrared (SWIR) detector based on metal chalcogenide CQDs (HgTe and CdTe CQDs). An n-type ZnO layer between the CdTe and HgTe layers is introduced as a hole-blocking layer to prevent hole injection from the different sensing layers, enabling the detector to switch between the VIS and SWIR modes by changing the polarity and magnitude of the bias voltage. The device exhibits an excellent performance with high responsivities of 0.5 and 1.1 A W−1 for the two bands that peak at 700 and 2100 nm, respectively. The detectivity of the device can reach 1.1 × 1011 Jones at +3 V (VIS) and 4.5 × 1011 Jones at −2 V (SWIR). In addition, VIS/SWIR dual-band imaging is realized, which provides more comprehensive object information than single-band detectors.


  • Resonant cavity-enhanced colloidal quantum-dot dual-band infrared photodetectors

    by Yuning Luo, Shuo Zhang, Xin Tang, Menglu Chen

    Infrared multispectral detection is explored extensively due to its wide applications in military reconnaissance, auto-driving and weather forecasting. As an alternative to epitaxial semiconductors, the wide spectral tunability and optical versatility of colloidal quantum dots (CQDs) have inspired various high-performance optoelectronic devices. Here, we demonstrate an integration of the CQD dual-band infrared photodetector and a Fabry–Perot resonance cavity, which provides a bias-switchable spectral response in the short-wave infrared (SWIR) and mid-wave infrared (MWIR) range. At the same time, the performance of the detector can be elevated by the improved optical collection efficiency and spectral selectivity due to the resonant cavity. The photodetector has a responsivity of 1.1 A W−1 and 1.6 A W−1 in SWIR and MWIR, respectively. The detector performance is illustrated by dual-band infrared imaging and spectral absorption measurement.