Xavier Beudaert
Research Subjects
Xavier Beudaert has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
J. Munoa
3 shared publications- Kaan Erkorkmaz
Precision Controls Laboratory, University of Waterloo, Waterloo, ON N2L 3G1, Canada
3 shared publications - Mónica Gil Inchaurza
Dynamics and Control Department, IDEKO, Basque Research and Technology Alliance (BRTA), Elgoibar, Spain
3 shared publications - Jokin Munoa
IDEKO (España)
2 shared publications - Oier Franco
Dynamics and Control, Ideko, 20870 Elgoibar, Spain
2 shared publications A. Garnier
DataThings SA, Luxembourg, Luxembourg
1 shared publication
Latest Publications
- 30 April 2025
- Published by Elsevier in CIRP Annals
- Vol. 74 (1) , 749-753
Aliased beating helix induced by dual-frequency vibrations in turning
- 30 April 2025
- Published by Elsevier in CIRP Annals
- Vol. 74 (1) , 749-753
Aliased beating helix induced by dual-frequency vibrations in turning
- 1 November 2024
- Published by UK Zhende Publishing Limited Company in DYNA Ingenieria e Industria
- Vol. 99 (6) , 644-650
INFLUENCE OF A SINGLE FREQUENCY VIBRATION ON THE UNDULATION PROFILE OF TURNED PARTS
The generation of the surface topography in machining is a complex process whereby the dynamics of the machine-tool and the kinematics of the cutting process are combined. The purpose of developing a surface topography simulation model in turning is to predict the combined effect of the tool geometry, process parameters, and relative tool-workpiece vibration. The simulations demonstrate that a single vibration frequency can generate multiple wavelengths on the workpiece profile. The correlation between machine-tool vibrations and surface topography is applied to accurately diagnose the machine defect that results in poor surface quality in a cylindrical turning process. Key words: surface topography, tool-workpiece vibration, waviness profile
- 1 November 2024
- Published by UK Zhende Publishing Limited Company in DYNA Ingenieria e Industria
- Vol. 99 (6) , 644-650
INFLUENCE OF A SINGLE FREQUENCY VIBRATION ON THE UNDULATION PROFILE OF TURNED PARTS
The generation of the surface topography in machining is a complex process whereby the dynamics of the machine-tool and the kinematics of the cutting process are combined. The purpose of developing a surface topography simulation model in turning is to predict the combined effect of the tool geometry, process parameters, and relative tool-workpiece vibration. The simulations demonstrate that a single vibration frequency can generate multiple wavelengths on the workpiece profile. The correlation between machine-tool vibrations and surface topography is applied to accurately diagnose the machine defect that results in poor surface quality in a cylindrical turning process. Key words: surface topography, tool-workpiece vibration, waviness profile
- Open Access
- 24 September 2024
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 8 (5) , 207
Feed Drive Control and Non-Linear Friction Interaction Effect on Machining Chatter Stability Prediction
In large-scale machine tool applications, the presence of low structural natural frequencies limits the cutting capabilities of the machine. The machine tool joints interact with the structural mode shapes, hence, the feed drive system characteristics can significantly influence the resultant dynamics at the cutting point. This paper investigates the effect of guideway non-linear friction and feed drive motion control parameters on chatter stability predictions. Field experimentation on seven machines reveals substantial differences between in-motion and idle dynamics, leading to errors in traditional process stability predictions. By using a one-degree-of-freedom model that incorporates non-linear friction and controller forces together with motion commands, the effect of axis motion on machine tool dynamics is analyzed. Later, the feed and force non-linearities are studied in a large-scale machine tool using traditional and alternative dynamic characterization techniques. The findings demonstrate that both feed and force non-linearities influence the frequency response functions at the cutting points, ultimately affecting the accuracy of process stability predictions. Proper selection of feed drive control parameters reduces the cutting point compliance, improving machine tool productivity by up to 50%.
- 24 September 2024
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 8 (5) , 207
Open AccessFeed Drive Control and Non-Linear Friction Interaction Effect on Machining Chatter Stability Prediction
In large-scale machine tool applications, the presence of low structural natural frequencies limits the cutting capabilities of the machine. The machine tool joints interact with the structural mode shapes, hence, the feed drive system characteristics can significantly influence the resultant dynamics at the cutting point. This paper investigates the effect of guideway non-linear friction and feed drive motion control parameters on chatter stability predictions. Field experimentation on seven machines reveals substantial differences between in-motion and idle dynamics, leading to errors in traditional process stability predictions. By using a one-degree-of-freedom model that incorporates non-linear friction and controller forces together with motion commands, the effect of axis motion on machine tool dynamics is analyzed. Later, the feed and force non-linearities are studied in a large-scale machine tool using traditional and alternative dynamic characterization techniques. The findings demonstrate that both feed and force non-linearities influence the frequency response functions at the cutting points, ultimately affecting the accuracy of process stability predictions. Proper selection of feed drive control parameters reduces the cutting point compliance, improving machine tool productivity by up to 50%.
- 15 November 2023
- Published by MM Publishing, s.r.o. in MM Science Journal
- Vol. 2023 (4) , 6973-6980
PROCESS CONTROL COMBINING MACHINE LEARNING AND FINGERPRINT APPROACHES
The MM Science Journal, published since 2008, is a world respected scientific journal. The journal, published in English, is double peer reviewed and competitive in distributing knowledge among domestic and international academics and professionals. Full texts are available on-line on the journal...
- 15 November 2023
- Published by MM Publishing, s.r.o. in MM Science Journal
- Vol. 2023 (4) , 6973-6980
PROCESS CONTROL COMBINING MACHINE LEARNING AND FINGERPRINT APPROACHES
The MM Science Journal, published since 2008, is a world respected scientific journal. The journal, published in English, is double peer reviewed and competitive in distributing knowledge among domestic and international academics and professionals. Full texts are available on-line on the journal...
- 27 April 2023
- Published by Elsevier in CIRP Annals
- Vol. 72 (1) , 329-332
Virtual vibration absorber for active forced vibration reduction
- 27 April 2023
- Published by Elsevier in CIRP Annals
- Vol. 72 (1) , 329-332
Virtual vibration absorber for active forced vibration reduction
- 18 May 2022
- Published by Elsevier in CIRP Annals
- Vol. 71 (1) , 361-364
Influence of guideway friction on the cutting point receptance in machine tools
- 18 May 2022
- Published by Elsevier in CIRP Annals
- Vol. 71 (1) , 361-364
Influence of guideway friction on the cutting point receptance in machine tools
- Open Access
- 26 September 2020
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 111 (1-2) , 341-357
A CPPS based on GBDT for predicting failure events in milling
Cyber-physical production systems (CPPS) are mechatronic systems monitored and controlled by software brains and digital information. Despite its fast development along with the advancement of Industry 4.0 paradigms, an adaptive monitoring system remains challenging when considering integration with traditional manufacturing factories. In this paper, a failure predictive tool is developed and implemented. The predictive mechanism, underpinned by a hybrid model of the dynamic principal component analysis and the gradient boosting decision trees, is capable of anticipating the production stop before one occurs. The proposed methodology is implemented and experimented on a repetitive milling process hosted in a real-world CPPS hub. The online testing results have shown the accuracy of the predicted production failures using the proposed predictive tool is as high as 73% measured by the AUC score.
- 26 September 2020
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 111 (1-2) , 341-357
Open AccessA CPPS based on GBDT for predicting failure events in milling
Cyber-physical production systems (CPPS) are mechatronic systems monitored and controlled by software brains and digital information. Despite its fast development along with the advancement of Industry 4.0 paradigms, an adaptive monitoring system remains challenging when considering integration with traditional manufacturing factories. In this paper, a failure predictive tool is developed and implemented. The predictive mechanism, underpinned by a hybrid model of the dynamic principal component analysis and the gradient boosting decision trees, is capable of anticipating the production stop before one occurs. The proposed methodology is implemented and experimented on a repetitive milling process hosted in a real-world CPPS hub. The online testing results have shown the accuracy of the predicted production failures using the proposed predictive tool is as high as 73% measured by the AUC score.
- Open Access
- 21 April 2020
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 4 (2) , 33
Effect of Rack and Pinion Feed Drive Control Parameters on Machine Tool Dynamics
In large heavy-duty machine tool applications, the parametrization of the controller that is used for the positioning of the machine can affect the machine tool dynamics. The aim of this paper is to build a Multiple-Input and Multiple-Output model that couples the servo controller and machine tool dynamics to predict the frequency response function (FRF) at the cutting point. The model is experimentally implemented and validated in an electronically preloaded rack and pinion machine tool. In addition, the influence of each control parameter on the machine tool’s compliance is analysed.
- 21 April 2020
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 4 (2) , 33
Open AccessEffect of Rack and Pinion Feed Drive Control Parameters on Machine Tool Dynamics
In large heavy-duty machine tool applications, the parametrization of the controller that is used for the positioning of the machine can affect the machine tool dynamics. The aim of this paper is to build a Multiple-Input and Multiple-Output model that couples the servo controller and machine tool dynamics to predict the frequency response function (FRF) at the cutting point. The model is experimentally implemented and validated in an electronically preloaded rack and pinion machine tool. In addition, the influence of each control parameter on the machine tool’s compliance is analysed.