PLPiotr Lewko

Piotr Lewko

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Piotr Lewko has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Effect of Processing Conditions of Enzymatic, Extrusion, and Hybrid Treatment Methods on Composition and Selected Technofunctional Properties of Developed Wheat Flour

    by Piotr Lewko, Agnieszka Wójtowicz, Michał Rudaś

    In this study, wheat flour characterized by a high content of nonstarch polysaccharides was fortified with enzymes and then subjected to low temperature (up to 85°C) extrusion cooking treatment. Conventional enzymatic hydrolysis with cellulase and cellulase–xylanase blend, as well as extrusion and hybrid enzymatic–extrusion treatments, was tested under variable conditions. Extrusion of wheat flour was applied at 23%–27% initial moisture at the temperature range of 40°C–80°C. Proximate composition, polysaccharide content, and its fractions, as well as rheological and technofunctional properties, were tested. Extruded and hybrid‐modified wheat flour showed a significant decrease in fat, ash, insoluble fiber content, gelatinization beginning temperature, dough stability, starch gelatinization, amylase activity, starch retrogradation, and gluten performance index, whereas increased hydration capacity, max viscosity, setback, protein weakening, and solvent retention capacity were evidenced in the presence of all tested solvents. Soluble and insoluble fractions of nonstarch polysaccharides were, however, significantly different, especially if the hybrid cellulase–xylanase–extrusion method was applied to wheat flour. Moreover, the crystalline structure of wheat flour changed significantly after extrusion and hybrid treatments. In addition, the microstructure showed a significant agglomeration of the extruded flours due to starch gelatinization and formation of melted phase in all extruded and hybrid‐treated flours, with visible fibrous particles coming from the outer layers of wheat grains as polysaccharide fractions. Extruded wheat flour, characterized by increased viscosity, hydration, and solvent retention ability, can be used as a “clean label” improver in mixtures for various bakery products, especially bread.


  • Open Access

    The Influence of Processing Using Conventional and Hybrid Methods on the Composition, Polysaccharide Profiles and Selected Properties of Wheat Flour Enriched with Baking Enzymes

    by Piotr Lewko, Agnieszka Wójtowicz, Daniel M. Kamiński

    In this study, a developed wheat flour blend (F), consisting of a high content of non-starch polysaccharides, was fortified with cellulase (C) and a cellulase–xylanase complex (CX) and then processed via conventional and hybrid treatment methods. Dry heating (T), hydrothermal treatment (H) and extrusion processing (E) were applied without or with enzyme addition as hybrid treatments. Proximate composition and polysaccharide profiles selected techno-functional and structural properties of modified wheat flours, were analyzed. Conventional and hybrid treatments induced changes in polysaccharide fraction compositions (especially the arabinoxylans) and the rheology of modified flour. Dry heating caused an inconsiderable effect on flour composition but reduced its baking value, mainly by reducing the elasticity of the dough and worsening the strain hardening index, from 49.27% (F) to 44.83% (TF) and from 1.66 (F) to 1.48 (TF), respectively. The enzymes added improved the rheological properties and baking strength, enhancing the quality of gluten proteins. Hydrothermal enzyme-assisted treatment increased flour viscosity by 14–26% and improved the dough stability by 12–21%; however, the use of steam negatively affected the protein structure, weakening dough stretchiness and elasticity. Extrusion, especially enzyme-assisted, significantly increased the hydration properties by 55–67% but lowered dough stability, fat content and initial gelatinization temperature due to the changes in the starch, mostly induced by the hybrid enzymatic–extrusion treatment. The structure of extruded flours was different from that obtained for other treatments where the peak intensity at 20° was the highest, suggesting the presence of amorphous phases of amylose and lipids. The results can be helpful in the selection of processing conditions so as to obtain flour products with specific techno-functional properties.


  • Open Access

    Application of Conventional and Hybrid Thermal-Enzymatic Modified Wheat Flours as Clean Label Bread Improvers

    by Piotr Lewko, Agnieszka Wójtowicz, Marek Gancarz

    A new flour blend (F) composed of selected milling and leaving passages with a high content of non-starch polysaccharides underwent thermal (T), hydrothermal (H) or hybrid processing and was used along with cellulase (C) and cellulase-xylanase complex (CX) to produce bread. This modified flour can be considered a clean label product. In this study, blends of common and treated flours were tested for dough properties and rheology. The modified flours were added at 10 and 20% to the base wheat flour. A pan bread was then prepared to test their suitability for bread baking. Dough and bread properties were subsequently assessed. Accordingly, dough with added thermally, hydrothermally, and hybrid modified flours revealed differences in rheology. Addition of hybrid enzymatic-hydrothermal treated flour increased dough tenacity by 23% and baking strength by 26%, but decreased dough extensibility by 19%, whereas hybrid enzymatic-thermal modification increased water absorption by 6% and bread yield from 146.77% to 150.02% when modified flour was added at 20%. Breads with added modified flours demonstrated a 16% increase in bread volume, 8% lower baking loss, and 14% greater density, with no negative effect on color and texture. Thus, hybrid thermal-enzymatic treatment of the developed flours can be recommended as a suitable method for enhancing the utilization of waste flour fractions and increasing their value by enabling them to be considered as clean label bread improvers.


  • Open Access

    Effect of Extruder Configuration and Extrusion Cooking Processing Parameters on Selected Characteristics of Non-Starch Polysaccharide-Rich Wheat Flour as Hybrid Treatment with Xylanase Addition

    by Piotr Lewko, Agnieszka Wójtowicz, Monika Różańska-Boczula

    The effects of a single-screw extruder configuration and processing variables such as conventional extrusion or hybrid treatments with xylanase were tested on the extrusion performance and selected characteristics of the developed non-starch polysaccharide-rich (NSP-rich) wheat flour. L/D 16 and 20 extruder configurations with various screw profiles were used. The interactions between processing variables (moisture content 23, 25, 27%; screw speed 40, 60, 80 rpm; xylanase level 0, 50, 100 ppm) were assessed to indicate energy consumption and the rheological properties of flour. The results showed that the possibility of obtaining enzyme-assisted extruded flour products derived from flours of varying characteristics depended on the processing conditions. The application of various extruder configurations and screw profiles showed significant effects on both processing behavior and rheological characteristics. The longer L/D 20 extruder configuration using a screw profile with mixing elements allowed us to obtain products with lower extrusion pressure (max. 20.8 bar) and energy requirements (max. SME = 33.1 kWh/kg) and better rheological properties (max. Hyd = 69.2%, less intensive starch gelatinization with max. C3 = 1.47 Nm) than the L/D 16 version. The extruded wheat flour was characterized by improved hydration properties and limited retrogradation tendency, especially when hybrid extrusion with xylanase was applied. This may lead to favorable results, as the newly developed enzymatic extrusion modification method produces NSP-rich wheat flour with specific techno-functional and rheological characteristics that can be seen as a potential “clean label” enhancer in bakery products. Our statistical analysis confirmed feed moisture and screw speed to be the variables with the most significant effect on wheat flour features.


  • Open Access

    Influence of the Forming Die Design on Processing and Physical Properties of Gluten-Free Crisps

    by Marcin Mitrus, Kacper Tydman, Marek Milanowski, Jakub Soja, Piotr Lewko, Karol Kupryaniuk, Agnieszka Wójtowicz

    The aim of the research was to evaluate the influence of the forming die openings shape on processing parameters of the extrusion-cooking process and on the selected properties of gluten-free crisps. The experiment used blends of corn grits, unroasted buckwheat, rice, and dried blackberries. The extrusion process of gluten-free crisps was carried out via a prototype EXP-45-32 single-screw extruder with L/D=16. During the tests, 5 different forming dies were assessed: 2 openings with a diameter of 2 mm each, 1 round opening with a diameter of 3 mm, 1 cross-shaped opening, a star and a heart. During the tests, the processing efficiency and energy consumption of the extrusion process were tested, and the expansion index, bulk density and hardness of the crisps were investigated. The research demonstrated that the forming die shape affects the efficiency and energy consumption of the extrusion-cooking process of crisps. The lowest efficiency was found if a heart-shaped die was used, and the highest efficiency was determined in the case of a star-shape die. Moreover, the highest specific energy consumption was noted when using a star-shaped die during crisps extrusion. Crisps obtained using dies with larger diameters were characterized by a lower expansion index. The complicated shape of the die opening resulted in less expansion of the obtained crisps. The highest bulk density and hardness were found in the case of crisps obtained on a star-shaped forming die.


  • Open Access

    Corn-Based Gluten-Free Snacks Supplemented with Various Dried Fruits: Characteristics of Physical Properties and Effect of Variables

    by Monika Różańska-Boczula, Agnieszka Wójtowicz, Magdalena Piszcz, Jakub Soja, Piotr Lewko, Szymon Ignaciuk, Marek Milanowski, Karol Kupryaniuk, Kamila Kasprzak-Drozd

    The market of extruded products is constantly growing and the incorporation of fruit items into their recipe, can made a crisp snack product a healthy one of acceptable flavor. The subject of this work is the evaluation of the effects of production screw speed, fruit type and amount on selected physical properties (expansion index, bulk density, water absorption and solubility, texture profile and color balance) of corn-based gluten-free crisps supplemented with various amounts (0–20%) of dried fruits (apple, white mulberry, goji berry, elderberry, blackberry) processed at variable screw speeds (80, 100 and 120 rpm). This work demonstrates that it is possible to obtain marketable extruded snacks with natural color coming from the incorporated dried fruits and with adequate expansion and texture if addition was up to 10% of all the tested fruits. Moreover, very good aeration, crispy texture and acceptable natural color was found if dried elderberry and blackberry were added to snacks even at 15 and 20%. Application of 15 or 20% of apple, white mulberry and goji berries showed similar color profiles and caused decrease in texture and expansion of snacks. The rotational screw speed effect differs significantly only in hardness and cutting force of the supplemented corn crisps.


  • Open Access

    Distribution of Arabinoxylans and Their Relationship with Physiochemical and Rheological Properties in Wheat Flour Mill Streams as an Effective Way to Predict Flour Functionality

    by Piotr Lewko, Agnieszka Wójtowicz, Marek Gancarz

    The aim of the study was to evaluate wheat flour fractions and the relationships between the rheological properties of wheat flour mill streams with arabinoxylans content to predict flour functionality. The tested wheat variety was IS Laudis and an industrial milling station with several roll sections was employed to reach 30 passages of flour streams. Each mill stream fraction was analyzed separately. Several physiochemical (moisture, ash content, falling number, wet gluten content, gluten index, and damaged starch content) and rheological properties were evaluated by means of utilizing various test apparatus and techniques. The total content of non-starch polysaccharides and arabinoxylans, as well as soluble and insoluble fractions were investigated. Results showed significant differences between the mill streams in terms of the content of physicochemical parameters and rheological properties, as well as in soluble and insoluble fractions of non-starch polysaccharides and arabinoxylans. The relationships between the tested parameters and PCA analysis can be useful for millers who can then select and blend several flour streams to obtain a maximum amount of flour with specified characteristics. A better understanding of the origin and function of different fractions and the role of arabinoxylans and their fractions in the milling process will allow the development of wheat flour blends with the desired functionality. Flours from late reduction and sizing passages (C and R) as well as from sorting filter (V) streams showed high ash content as well as T-NSP and T-AX levels, so the final content of NSP in flour blends may be balanced by the application of the proper amount of C6–C7 and R5 stream flours.


  • Open Access

    Structure and Texture Characteristics of Novel Snacks Expanded by Various Methods

    by Katarzyna Lisiecka, Agnieszka Wójtowicz, Katarzyna Samborska, Marcin Mitrus, Tomasz Oniszczuk, Maciej Combrzyński, Jakub Soja, Piotr Lewko, Kamila Kasprzak Drozd, Anna Oniszczuk

    The aim of this work was to evaluate the structure of novel potato-based snack foods supplemented with various levels of fresh carrot pulp by using X-ray micro-computed tomography, texture profile, and sensory analysis. Three different methods of extruded snack pellets expansion were used to obtain ready-to-eat crisps: deep-fat frying, microwave, and hot-air toasting. The obtained results revealed that the pellets expansion method affected the porosity, size of pores and wall thickness, texture properties, and notes of sensory analyses of the obtained crisps. Deep-fat frying had a similar influence to microwave heating on ready-to-eat crisps properties, and both methods were significantly different in comparison to hot-air toasting. Crisps based on snack pellets supplemented with the addition of fresh carrot pulp in the amount of 10 to 30% expansion through hot-air heating showed unsatisfactory expansion and texture, but it is highly advisable to use deep-fat frying and microwave heating to achieve attractive potato-carrot crisps.