Mansoor Ahmad Bhat
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Mansoor Ahmad Bhat has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
- Eftade O. Gaga
Department of Environmental Engineering, Faculty of Engineering, Eskişehir Technical University, Eskişehir, Turkey
7 shared publications Eftade O. Gaga
Department of Environmental Engineering, Faculty of Engineering, Eskişehir Technical University, Eskişehir, Türkiye
4 shared publications- Kadir Gedik
Department of Environmental Engineering, Eskişehir Technical University, Eskişehir, Türkiye
4 shared publications Agata Janaszek
Faculty of Environmental Engineering, Geomatics and Renewable Energy Kielce University of Technology Kielce Poland
3 shared publications- Fatma Nur Eraslan
Department of Environmental Engineering, Eskişehir Technical University, Eskişehir, Türkiye
3 shared publications Fatma Nur Eraslan
Eskisehir Technical University
2 shared publications
Latest Publications
- 19 September 2026
- Published by Springer Nature in Environment, Development and Sustainability
- Vol. 28 (11) , 28493-28524
Evaluating the role of environmental engineering research in the anthropocene through bibliometric analysis
- 19 September 2026
- Published by Springer Nature in Environment, Development and Sustainability
- Vol. 28 (11) , 28493-28524
Evaluating the role of environmental engineering research in the anthropocene through bibliometric analysis
- Open Access
- 16 March 2026
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Advances
- Vol. 5 (5) , 1252-1272
Microplastic emissions and degradation mechanisms, in artificial turf systems – analytical detection and future directions
The environmental impact of artificial turf systems is receiving increasing attention, particularly in relation to the release of microplastics.
- 16 March 2026
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Advances
- Vol. 5 (5) , 1252-1272
Open AccessMicroplastic emissions and degradation mechanisms, in artificial turf systems – analytical detection and future directions
The environmental impact of artificial turf systems is receiving increasing attention, particularly in relation to the release of microplastics.
- 10 February 2026
- Published by Wiley in Environmental Quality Management
- Vol. 35 (3)
Microplastic and Potentially Toxic Element Contamination in Indoor Household Dust in Kielce, Poland
This research investigates the presence and concentrations of microplastics and potentially toxic elements in dust from homes in urban and rural environments, revealing their hidden threats to human health and indoor air quality. Stereomicroscopic analysis showed that the fiber was dominant, and the nonfiber was less abundant. The average number of fibers and nonfibers in house dust samples in the city center was 61 ± 39 and 16 ± 8 per milligram, having an average size of 1206 ± 276 µm. While the average fibers and nonfibers count in house dust samples in rural areas was 57 ± 26 and 9 ± 3 per milligram, with an average size of microplastics in house dust samples in rural areas of 1068 ± 130 µm. The identified microplastics revealed different colours, mainly bright ones. The EDX analysis of microplastics revealed the existence of different elements (Ne, Na, C, S, Cl, O, Ca, Zn, Al, and Si). Seven potentially toxic elements (Ni, Cr, Cu, Pb, Zn, Cd, and Co) and Zn had the highest concentrations in all houses in the city center (1247.948 ± 907.904 mg/kg) and in rural areas (1164.394 ± 181.149 mg/kg). Average daily inhalation dose indices were calculated to assess the harmfulness of potentially toxic elements to human health via inhalation. Cd showed the lowest inhalation metal concentration, whereas Zn showed the highest. The findings show no significant differences in microplastics and potentially toxic elements' concentrations between urban and rural areas. The results emphasise the urgent need for better air quality management and pollution control strategies in residential settings.
- 10 February 2026
- Published by Wiley in Environmental Quality Management
- Vol. 35 (3)
Microplastic and Potentially Toxic Element Contamination in Indoor Household Dust in Kielce, Poland
This research investigates the presence and concentrations of microplastics and potentially toxic elements in dust from homes in urban and rural environments, revealing their hidden threats to human health and indoor air quality. Stereomicroscopic analysis showed that the fiber was dominant, and the nonfiber was less abundant. The average number of fibers and nonfibers in house dust samples in the city center was 61 ± 39 and 16 ± 8 per milligram, having an average size of 1206 ± 276 µm. While the average fibers and nonfibers count in house dust samples in rural areas was 57 ± 26 and 9 ± 3 per milligram, with an average size of microplastics in house dust samples in rural areas of 1068 ± 130 µm. The identified microplastics revealed different colours, mainly bright ones. The EDX analysis of microplastics revealed the existence of different elements (Ne, Na, C, S, Cl, O, Ca, Zn, Al, and Si). Seven potentially toxic elements (Ni, Cr, Cu, Pb, Zn, Cd, and Co) and Zn had the highest concentrations in all houses in the city center (1247.948 ± 907.904 mg/kg) and in rural areas (1164.394 ± 181.149 mg/kg). Average daily inhalation dose indices were calculated to assess the harmfulness of potentially toxic elements to human health via inhalation. Cd showed the lowest inhalation metal concentration, whereas Zn showed the highest. The findings show no significant differences in microplastics and potentially toxic elements' concentrations between urban and rural areas. The results emphasise the urgent need for better air quality management and pollution control strategies in residential settings.
- RetractionOpen Access
- 8 December 2025
- Published by Springer Nature in Euro-Mediterranean Journal for Environmental Integration
- Vol. 11 (1) , 21
Retraction Note: An in-depth study of dust samples reveals microplastic (MP) contamination in indoor commercial markets
- 8 December 2025
- Published by Springer Nature in Euro-Mediterranean Journal for Environmental Integration
- Vol. 11 (1) , 21
RetractionOpen AccessRetraction Note: An in-depth study of dust samples reveals microplastic (MP) contamination in indoor commercial markets
- Top Cited PapersOpen Access
- 10 March 2025
- Published by Springer Nature in Euro-Mediterranean Journal for Environmental Integration
- Vol. 10 (4) , 2633-2659
Microplastics in terrestrial ecosystems: sources, transport, fate, mitigation, and remediation strategies
Microplastic (MP) pollution has become a pervasive environmental issue, extending beyond marine ecosystems to impact terrestrial environments significantly. This review article comprehensively examines MPs’ sources, transport, and fate in terrestrial environments. Primary MPs, designed for commercial use, and secondary MPs, resulting from macroplastic deterioration, originate from various urban, farming, and manufacturing-related activities. MP dynamics in soils involve physicochemical and biological interactions, influencing their distribution, movement, and deposition. Wind, water flow, and soil organisms can transport MPs through diverse landscapes. MP fate is characterized by its persistence, potential for bioaccumulation, and incomplete degradation through physical, chemical, and biological mechanisms. This persistence poses significant ecological and health risks, as MPs can affect soil structure, water retention, and organism health. Much research efforts have been dedicated to marine ecosystems, whereas comparatively less attention has been given to terrestrial environments. It is crucial to investigate the fate of MPs, their transport mechanisms, their influence on soil quality, polymer composition and morphologies, and various land-use types. Establishing standardized and harmonized methodologies for the analysis of MPs in soil–plant ecosystems is pivotal. To minimize MPs’ negative impacts on the environment and human health, safe and sustainable plastics design should be implemented. This review aims to enrich the comprehension of MP behaviour in terrestrial environments while informing strategies for mitigating their adverse effects, emphasizing the need for interdisciplinary research and effective policy interventions. Future investigations should also evaluate the various relations of MPs with soil quality and their ecotoxicological effects on organisms within the framework of worldwide environmental alterations.
- 10 March 2025
- Published by Springer Nature in Euro-Mediterranean Journal for Environmental Integration
- Vol. 10 (4) , 2633-2659
Top Cited PapersOpen AccessMicroplastics in terrestrial ecosystems: sources, transport, fate, mitigation, and remediation strategies
Microplastic (MP) pollution has become a pervasive environmental issue, extending beyond marine ecosystems to impact terrestrial environments significantly. This review article comprehensively examines MPs’ sources, transport, and fate in terrestrial environments. Primary MPs, designed for commercial use, and secondary MPs, resulting from macroplastic deterioration, originate from various urban, farming, and manufacturing-related activities. MP dynamics in soils involve physicochemical and biological interactions, influencing their distribution, movement, and deposition. Wind, water flow, and soil organisms can transport MPs through diverse landscapes. MP fate is characterized by its persistence, potential for bioaccumulation, and incomplete degradation through physical, chemical, and biological mechanisms. This persistence poses significant ecological and health risks, as MPs can affect soil structure, water retention, and organism health. Much research efforts have been dedicated to marine ecosystems, whereas comparatively less attention has been given to terrestrial environments. It is crucial to investigate the fate of MPs, their transport mechanisms, their influence on soil quality, polymer composition and morphologies, and various land-use types. Establishing standardized and harmonized methodologies for the analysis of MPs in soil–plant ecosystems is pivotal. To minimize MPs’ negative impacts on the environment and human health, safe and sustainable plastics design should be implemented. This review aims to enrich the comprehension of MP behaviour in terrestrial environments while informing strategies for mitigating their adverse effects, emphasizing the need for interdisciplinary research and effective policy interventions. Future investigations should also evaluate the various relations of MPs with soil quality and their ecotoxicological effects on organisms within the framework of worldwide environmental alterations.
- RetractedOpen Access
- 20 February 2025
- Published by Springer Nature in Euro-Mediterranean Journal for Environmental Integration
- Vol. 10 (4) , 2593-2604
RETRACTED ARTICLE: An in-depth study of dust samples reveals microplastic (MP) contamination in indoor commercial markets
Environmental research on marine and terrestrial microplastics (MPs) is widespread compared to indoor MP dynamics. This study analysed indoor dust samples from markets for MP identification, adding to indoor MP pollution studies. The physical characterisation of these samples involved stereomicroscopy, revealing a wide range of MPs, including fibres, fragments, and pellets of various colours, such as black, brown, blue, red, and yellow. The average size of identified MPs was 143.26–4168.6 µm. Under micro-Raman, 120 particles were examined, and 105 MPs were revealed. MPs were categorised into 17 categories: acrylonitrile butadiene, polyethylene, low-density polyethylene, polyvinyl chloride, and others. These MPs were associated with various indoor sources, such as paints, cosmetics, plastic items, and textiles. The distribution of detected MPs differed between the various indoor market dust samples. SEM–EDX evaluation further showed the elemental composition of the MPs, including common elements like carbon–oxygen and elements associated with additives or environmental contamination, such as silicon, aluminium, iron, sodium, fluorine, and zinc. The presence of these elements suggests diverse sources and potential toxicities of the identified MPs. The findings support indoor dust studies and illuminate marketplace MPs. Due to higher concentrations and sources, widespread indoor MPs may enhance health concerns.
- 20 February 2025
- Published by Springer Nature in Euro-Mediterranean Journal for Environmental Integration
- Vol. 10 (4) , 2593-2604
RetractedOpen AccessRETRACTED ARTICLE: An in-depth study of dust samples reveals microplastic (MP) contamination in indoor commercial markets
Environmental research on marine and terrestrial microplastics (MPs) is widespread compared to indoor MP dynamics. This study analysed indoor dust samples from markets for MP identification, adding to indoor MP pollution studies. The physical characterisation of these samples involved stereomicroscopy, revealing a wide range of MPs, including fibres, fragments, and pellets of various colours, such as black, brown, blue, red, and yellow. The average size of identified MPs was 143.26–4168.6 µm. Under micro-Raman, 120 particles were examined, and 105 MPs were revealed. MPs were categorised into 17 categories: acrylonitrile butadiene, polyethylene, low-density polyethylene, polyvinyl chloride, and others. These MPs were associated with various indoor sources, such as paints, cosmetics, plastic items, and textiles. The distribution of detected MPs differed between the various indoor market dust samples. SEM–EDX evaluation further showed the elemental composition of the MPs, including common elements like carbon–oxygen and elements associated with additives or environmental contamination, such as silicon, aluminium, iron, sodium, fluorine, and zinc. The presence of these elements suggests diverse sources and potential toxicities of the identified MPs. The findings support indoor dust studies and illuminate marketplace MPs. Due to higher concentrations and sources, widespread indoor MPs may enhance health concerns.
- Open Access
- 2 January 2025
- Published by Springer Nature in Discover Environment
- Vol. 3 (1) , 1-15
Nature conservation and poverty alleviation through sustainable ecotourism: the case of Lolab Valley, India
Ecotourism is an important link between environmental conservation and poverty alleviation, as it generates income, empowers local communities, and provides educational benefits. This study focuses on the Lolab Valley in the remote Himalayan regions, emphasising its potential as one of India's premier sustainable tourism destinations. The primary goal of this study is to look into the future development of ecotourism in the area and to understand local perceptions and awareness of sustainable tourism between 2020 and 2023. To accomplish this, fieldwork was carried out that involved focus groups and semi-structured interviews, enabling a thorough investigation of the viewpoints of locals on sustainable tourism. To create a baseline understanding of the different types of tourism in the area, such as mountain, water, culinary, heritage, ethnographic, and creative tourism, the qualitative data that were gathered were examined. Based on our findings, travellers strongly favour sustainable travel over mass tourism. In particular, the option that participants preferred the most was mountain tourism (44%), followed by heritage tourism (20%), anthropological tourism (14%), water tourism (13%), and creative tourism (9%). This suggests that the community has undergone a substantial change in favour of sustainable tourism practices. This study demonstrates the significance of sustainable tourism over mass tourism and underscores the strong support of the local community for sustainable initiatives. Furthermore, it underscores the role of shared economies in mitigating poverty in the region. The Lolab Valley can make the most of its natural resources and maintain the welfare of its communities by promoting sustainable tourism.
- 2 January 2025
- Published by Springer Nature in Discover Environment
- Vol. 3 (1) , 1-15
Open AccessNature conservation and poverty alleviation through sustainable ecotourism: the case of Lolab Valley, India
Ecotourism is an important link between environmental conservation and poverty alleviation, as it generates income, empowers local communities, and provides educational benefits. This study focuses on the Lolab Valley in the remote Himalayan regions, emphasising its potential as one of India's premier sustainable tourism destinations. The primary goal of this study is to look into the future development of ecotourism in the area and to understand local perceptions and awareness of sustainable tourism between 2020 and 2023. To accomplish this, fieldwork was carried out that involved focus groups and semi-structured interviews, enabling a thorough investigation of the viewpoints of locals on sustainable tourism. To create a baseline understanding of the different types of tourism in the area, such as mountain, water, culinary, heritage, ethnographic, and creative tourism, the qualitative data that were gathered were examined. Based on our findings, travellers strongly favour sustainable travel over mass tourism. In particular, the option that participants preferred the most was mountain tourism (44%), followed by heritage tourism (20%), anthropological tourism (14%), water tourism (13%), and creative tourism (9%). This suggests that the community has undergone a substantial change in favour of sustainable tourism practices. This study demonstrates the significance of sustainable tourism over mass tourism and underscores the strong support of the local community for sustainable initiatives. Furthermore, it underscores the role of shared economies in mitigating poverty in the region. The Lolab Valley can make the most of its natural resources and maintain the welfare of its communities by promoting sustainable tourism.
- Open Access
- 9 August 2024
- Published by Springer Nature in Air Quality, Atmosphere & Health
- Vol. 18 (1) , 1-13
Unveiling the invisible: first discovery of micro- and nanoplastic size segregation in indoor commercial markets using a cascade impactor
Micro and nanoplastics (MNPs) may enter the human body through food, drink, and air. Scientists have mainly focused on the first two routes, but little is known about the third. A cascade impactor having a size range of (> 2.5, 1.0–2.5, 0.50–1.0, 0.25–0.50, and < 0.25 μm) was used to study the size segregation of MNPs in different indoor commercial markets. The morphological characterization showed the presence of fibers, fragments, films, lines, foam, and pellets with different colors. Three hundred-seven particles were scanned for chemical description under Micro-Raman analysis, and 247 were identified and categorized into 52 MNPs . The standard MNPs found in the samples were PTFE, PE, PP, HDPE, PA, LDPE, and PAM. The SEM-EDX analysis showed that C, O, and F had the highest weight% among all elements seen, while C, O, F, Mg, and Al were the common elements. These MNPs are small enough to get inhaled easily. MNPs in these indoor environments showed vast sources that emit these polymeric particles and have harmful human health impacts, particularly on the employees working there. So, there is a need to take the necessary measures to minimize the release of these MNPs in these indoor environments and their impacts on human health.
- 9 August 2024
- Published by Springer Nature in Air Quality, Atmosphere & Health
- Vol. 18 (1) , 1-13
Open AccessUnveiling the invisible: first discovery of micro- and nanoplastic size segregation in indoor commercial markets using a cascade impactor
Micro and nanoplastics (MNPs) may enter the human body through food, drink, and air. Scientists have mainly focused on the first two routes, but little is known about the third. A cascade impactor having a size range of (> 2.5, 1.0–2.5, 0.50–1.0, 0.25–0.50, and < 0.25 μm) was used to study the size segregation of MNPs in different indoor commercial markets. The morphological characterization showed the presence of fibers, fragments, films, lines, foam, and pellets with different colors. Three hundred-seven particles were scanned for chemical description under Micro-Raman analysis, and 247 were identified and categorized into 52 MNPs . The standard MNPs found in the samples were PTFE, PE, PP, HDPE, PA, LDPE, and PAM. The SEM-EDX analysis showed that C, O, and F had the highest weight% among all elements seen, while C, O, F, Mg, and Al were the common elements. These MNPs are small enough to get inhaled easily. MNPs in these indoor environments showed vast sources that emit these polymeric particles and have harmful human health impacts, particularly on the employees working there. So, there is a need to take the necessary measures to minimize the release of these MNPs in these indoor environments and their impacts on human health.
- Open Access
- 8 August 2024
- Published by Springer Nature in Discover Environment
- Vol. 2 (1) , 1-23
Soil contamination with microplastics (MPs) from treated wastewater and sewage sludge: risks and sustainable mitigation strategies
This review explores the hidden hazards associated with the reuse of treated wastewater and sewage sludge in agriculture while proposing mitigation strategies. It examines the origins and pathways of microplastics (MPs) in wastewater treatment plants and how these pollutants infiltrate agricultural ecosystems. The review assesses the effectiveness of MP removal from wastewater and its fate in soil after reuse, highlighting contamination dynamics and the need for proactive measures. Introducing soil remediation methods is crucial for addressing this issue. Alarming evidence of MPs in human blood, testis, semen, and placenta underscores the urgency for solutions, revealing significant threats to human health, particularly reproductive health. The review advocates for sustainable agricultural practices and effective soil remediation strategies to mitigate MP contamination, promoting environmental preservation, food safety, and human health protection. Graphical Abstract
- 8 August 2024
- Published by Springer Nature in Discover Environment
- Vol. 2 (1) , 1-23
Open AccessSoil contamination with microplastics (MPs) from treated wastewater and sewage sludge: risks and sustainable mitigation strategies
This review explores the hidden hazards associated with the reuse of treated wastewater and sewage sludge in agriculture while proposing mitigation strategies. It examines the origins and pathways of microplastics (MPs) in wastewater treatment plants and how these pollutants infiltrate agricultural ecosystems. The review assesses the effectiveness of MP removal from wastewater and its fate in soil after reuse, highlighting contamination dynamics and the need for proactive measures. Introducing soil remediation methods is crucial for addressing this issue. Alarming evidence of MPs in human blood, testis, semen, and placenta underscores the urgency for solutions, revealing significant threats to human health, particularly reproductive health. The review advocates for sustainable agricultural practices and effective soil remediation strategies to mitigate MP contamination, promoting environmental preservation, food safety, and human health protection. Graphical Abstract
- Open Access
- 6 June 2024
- Published by Springer Nature in Discover Environment
- Vol. 2 (1) , 1-15
Delving into river health: unveiling microplastic intrusion and heavy metal contamination in freshwater
The persistent use of plastics in chemical and industrial procedures has resulted in the contamination of the environment and human health via microplastics (MPs). This study investigates heavy metals, MP, pH, conductivity, and turbidity levels in the Nida River in Poland. The Nida River exhibited the existence of diverse coloured MPs in several physical forms, including fibres, fragments, pellets, and foams. Differences in the number of MPs were noted at five selected locations, with values ranging from 215 to 280 MPs per litre. The mean number of MPs observed was 245 ± 21 per litre. The study of water samples using a scanning electron microscope indicates the existence of various MPs. The morphological study of these MPs revealed patterns of degradation. The energy-dispersive X-ray examination indicates the existence of several elements, such as carbon, nitrogen, oxygen, sodium, magnesium, aluminium, silicon, phosphorus, and others. The water exhibited fluctuations in its levels of heavy metal content. The average zinc concentration in all samples was 96.86 ± 40.25 μg/L, which was the highest. It was followed by Pb 37.6 ± 31.9 μg/L concentration. The turbidity measurement was recorded as 46.38 ± 22.54, the pH level was 7.078 ± 0.33, and the conductivity value was determined to be 1338.8 ± 39.64. The HQ and HI values for adults and children in all age groups were less than one. The carcinogenic excess lifetime cancer risk (ELCR) exceeds the threshold value in most water samples. This study aims to fill the existing gap in understanding the precise measurement of MPs and heavy metals in freshwater sources in Poland. Health risk evaluations are the first step in developing pollution management, control, and water quality standards. Graphical Abstract
- 6 June 2024
- Published by Springer Nature in Discover Environment
- Vol. 2 (1) , 1-15
Open AccessDelving into river health: unveiling microplastic intrusion and heavy metal contamination in freshwater
The persistent use of plastics in chemical and industrial procedures has resulted in the contamination of the environment and human health via microplastics (MPs). This study investigates heavy metals, MP, pH, conductivity, and turbidity levels in the Nida River in Poland. The Nida River exhibited the existence of diverse coloured MPs in several physical forms, including fibres, fragments, pellets, and foams. Differences in the number of MPs were noted at five selected locations, with values ranging from 215 to 280 MPs per litre. The mean number of MPs observed was 245 ± 21 per litre. The study of water samples using a scanning electron microscope indicates the existence of various MPs. The morphological study of these MPs revealed patterns of degradation. The energy-dispersive X-ray examination indicates the existence of several elements, such as carbon, nitrogen, oxygen, sodium, magnesium, aluminium, silicon, phosphorus, and others. The water exhibited fluctuations in its levels of heavy metal content. The average zinc concentration in all samples was 96.86 ± 40.25 μg/L, which was the highest. It was followed by Pb 37.6 ± 31.9 μg/L concentration. The turbidity measurement was recorded as 46.38 ± 22.54, the pH level was 7.078 ± 0.33, and the conductivity value was determined to be 1338.8 ± 39.64. The HQ and HI values for adults and children in all age groups were less than one. The carcinogenic excess lifetime cancer risk (ELCR) exceeds the threshold value in most water samples. This study aims to fill the existing gap in understanding the precise measurement of MPs and heavy metals in freshwater sources in Poland. Health risk evaluations are the first step in developing pollution management, control, and water quality standards. Graphical Abstract