Rita Fidalgo-Pereira
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Rita Fidalgo-Pereira has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Júlio C. M. Souza
Center for MicroElectromechanical Systems (CMEMS-UMINHO), University of Minho, Guimarães, Portugal
7 shared publications - Orlanda Torres
UNIPRO–Oral Pathology and Rehabilitation Research Unit, University Institute of Health Sciences (IUCS), CESPU, 4585-116 Gandra, Portugal
6 shared publications - Óscar Carvalho
Center for MicroElectroMechanical Systems (CMEMS-UMinho), Universidade do Minho, 4800-058 Guimarães, Portugal
5 shared publications - Ana Teresa P. C. Gomes
Centre for Interdisciplinary Research in Health (CIIS), Faculty of Dental Medicine, Universidade Católica Portuguesa, Viseu, Portugal
3 shared publications - Filipe Samuel Silva
CMEMS – Center for Microelectromechanical Systems, University of Minho, Guimarães, Portugal
3 shared publications - Mutlu Özcan
Center for Dental Medicine, Clinic of Masticatory Disorders and Dental Biomaterials, University of Zurich, Zurich, Switzerland
3 shared publications
Latest Publications
- Open Access
Long-Term Clinical Performance of Dental Gels and Resin Infiltration for White Spot Lesions: A Systematic Review
White spot lesions (WSLs) are non-cavitated enamel lesions for which treatment success depends not only on initial lesion arrest or aesthetic improvement but also on long-term stability. This systematic review aimed to evaluate the long-term clinical, aesthetic, and remineralization outcomes of WSL treatments, with particular emphasis on treatment longevity and biomaterial-based approaches. A systematic search was conducted in PubMed, Scopus, and the Cochrane Library. Randomized controlled trials involving permanent teeth with ICDAS-assessed WSLs and a minimum follow-up of 12 months were eligible. Interventions included resin infiltration, fluoride-based therapies, remineralizing gels, casein phosphopeptide–amorphous calcium phosphate (CPP-ACP) formulations, hydroxyapatite, self-assembling peptides, microabrasion, bleaching, and combined approaches. Risk of bias was assessed using the Cochrane Risk-of-Bias 2 tool. Due to substantial clinical and methodological heterogeneity, a conventional pooled meta-analysis was not considered appropriate. Nine publications representing eight independent randomized controlled trials, with follow-up periods of 12–36 months, were included. Resin infiltration demonstrated the most consistent long-term aesthetic benefits and sustained reductions in visible WSL area. Non-invasive approaches, including fluoride-based therapies and remineralizing gels, generally improved outcomes from baseline; however, the additional benefits of specific formulations, including CPP-ACP/CPP-ACPF and fluoride-containing gels or varnishes, were inconsistent compared with conventional fluoride toothpaste. Limited quantitative comparisons favored resin infiltration over fluoride varnish, CPP-ACP, and fluoride toothpaste for lesion-area reduction. The certainty of evidence was low for aesthetic outcomes and very low to low for remineralization and lesion progression outcomes. Resin infiltration showed the most consistent long-term clinical and aesthetic benefits, maintained for up to 24 months. Non-invasive strategies may support lesion regression and remineralization, but their additional long-term benefits remain uncertain and appear dependent on formulation and treatment protocol. However, direct evidence of treatment durability was limited, as several trials assessed long-term effectiveness during continuous or repeated treatment rather than the maintenance of an initially achieved response. Recurrence and retreatment were inconsistently reported, and prevention of new WSLs represented a distinct clinical outcome. Further well-designed trials with standardized outcomes and longer follow-up are needed to establish the comparative effectiveness and longevity of biomaterial-based treatments for WSLs.
Open AccessLong-Term Clinical Performance of Dental Gels and Resin Infiltration for White Spot Lesions: A Systematic Review
White spot lesions (WSLs) are non-cavitated enamel lesions for which treatment success depends not only on initial lesion arrest or aesthetic improvement but also on long-term stability. This systematic review aimed to evaluate the long-term clinical, aesthetic, and remineralization outcomes of WSL treatments, with particular emphasis on treatment longevity and biomaterial-based approaches. A systematic search was conducted in PubMed, Scopus, and the Cochrane Library. Randomized controlled trials involving permanent teeth with ICDAS-assessed WSLs and a minimum follow-up of 12 months were eligible. Interventions included resin infiltration, fluoride-based therapies, remineralizing gels, casein phosphopeptide–amorphous calcium phosphate (CPP-ACP) formulations, hydroxyapatite, self-assembling peptides, microabrasion, bleaching, and combined approaches. Risk of bias was assessed using the Cochrane Risk-of-Bias 2 tool. Due to substantial clinical and methodological heterogeneity, a conventional pooled meta-analysis was not considered appropriate. Nine publications representing eight independent randomized controlled trials, with follow-up periods of 12–36 months, were included. Resin infiltration demonstrated the most consistent long-term aesthetic benefits and sustained reductions in visible WSL area. Non-invasive approaches, including fluoride-based therapies and remineralizing gels, generally improved outcomes from baseline; however, the additional benefits of specific formulations, including CPP-ACP/CPP-ACPF and fluoride-containing gels or varnishes, were inconsistent compared with conventional fluoride toothpaste. Limited quantitative comparisons favored resin infiltration over fluoride varnish, CPP-ACP, and fluoride toothpaste for lesion-area reduction. The certainty of evidence was low for aesthetic outcomes and very low to low for remineralization and lesion progression outcomes. Resin infiltration showed the most consistent long-term clinical and aesthetic benefits, maintained for up to 24 months. Non-invasive strategies may support lesion regression and remineralization, but their additional long-term benefits remain uncertain and appear dependent on formulation and treatment protocol. However, direct evidence of treatment durability was limited, as several trials assessed long-term effectiveness during continuous or repeated treatment rather than the maintenance of an initially achieved response. Recurrence and retreatment were inconsistently reported, and prevention of new WSLs represented a distinct clinical outcome. Further well-designed trials with standardized outcomes and longer follow-up are needed to establish the comparative effectiveness and longevity of biomaterial-based treatments for WSLs.
- Open Access
- 2 June 2026
- Published by MDPI AG in Biomolecules
- Vol. 16 (6) , 822
Material Properties of Composite Resins Used for Orthodontic Attachments in Clear Aligner Therapy: A Systematic Review
Clear aligner therapy has become increasingly widespread in contemporary orthodontics, relying on composite resin attachments to enhance force transmission and improve the predictability of tooth movement. The physicochemical and mechanical properties of these biomaterials play a crucial role in attachment durability, dimensional stability, and esthetic performance during treatment. This systematic review aimed to evaluate how different composite resin types influence the mechanical, optical, and functional performances of orthodontic attachments used in clear aligner therapy. A systematic literature search was conducted in the PubMed, Scopus, and Cochrane databases for studies published between 2015 and 2025, following PRISMA guidelines. In vitro studies and clinical trials evaluating composite resins used for attachment fabrication were included. Fifteen studies met the eligibility criteria, including eleven laboratory investigations and four clinical studies. The evaluated outcomes comprised shear bond strength, wear resistance, surface roughness, microhardness, color stability, and accuracy of attachment reproduction. Overall, all evaluated composite resins demonstrated shear bond strength values within clinically acceptable ranges. However, significant differences were observed in the material performances depending on the resin composition and viscosity. Nanohybrid and high-viscosity composite resins were generally associated with improved mechanical resistance, reduced wear, and greater dimensional stability, although SBS outcomes should be interpreted in light of the bonding protocols used. In contrast, flowable composite resins showed improved handling and adaptation to attachment molds but presented higher susceptibility to surface degradation and discoloration. The findings suggest that the composition and properties of composite resins significantly influence the mechanical and optical behavior of orthodontic attachments. Optimizing material selection according to biomechanical demands and esthetic requirements may improve attachment longevity and treatment predictability in clear aligner therapy. Clinicians should prioritize nanohybrid or high-viscosity composite resins for high-load attachments and use flowable composite resins materials when adaptation and esthetics are critical.
- 2 June 2026
- Published by MDPI AG in Biomolecules
- Vol. 16 (6) , 822
Open AccessMaterial Properties of Composite Resins Used for Orthodontic Attachments in Clear Aligner Therapy: A Systematic Review
Clear aligner therapy has become increasingly widespread in contemporary orthodontics, relying on composite resin attachments to enhance force transmission and improve the predictability of tooth movement. The physicochemical and mechanical properties of these biomaterials play a crucial role in attachment durability, dimensional stability, and esthetic performance during treatment. This systematic review aimed to evaluate how different composite resin types influence the mechanical, optical, and functional performances of orthodontic attachments used in clear aligner therapy. A systematic literature search was conducted in the PubMed, Scopus, and Cochrane databases for studies published between 2015 and 2025, following PRISMA guidelines. In vitro studies and clinical trials evaluating composite resins used for attachment fabrication were included. Fifteen studies met the eligibility criteria, including eleven laboratory investigations and four clinical studies. The evaluated outcomes comprised shear bond strength, wear resistance, surface roughness, microhardness, color stability, and accuracy of attachment reproduction. Overall, all evaluated composite resins demonstrated shear bond strength values within clinically acceptable ranges. However, significant differences were observed in the material performances depending on the resin composition and viscosity. Nanohybrid and high-viscosity composite resins were generally associated with improved mechanical resistance, reduced wear, and greater dimensional stability, although SBS outcomes should be interpreted in light of the bonding protocols used. In contrast, flowable composite resins showed improved handling and adaptation to attachment molds but presented higher susceptibility to surface degradation and discoloration. The findings suggest that the composition and properties of composite resins significantly influence the mechanical and optical behavior of orthodontic attachments. Optimizing material selection according to biomechanical demands and esthetic requirements may improve attachment longevity and treatment predictability in clear aligner therapy. Clinicians should prioritize nanohybrid or high-viscosity composite resins for high-load attachments and use flowable composite resins materials when adaptation and esthetics are critical.
- Open Access
White Spot Lesion Treatment Options: A Systematic Review of Different Techniques for Masking These Lesions
White spot lesions (WSLs) are early clinical stages of enamel demineralization, often related to orthodontic treatment or poor oral hygiene. The use of gels such as fluoride for topical application inhibits demineralization and promotes remineralization of dental tissues through various mechanisms. A variety of therapeutic approaches are available; however, recent research indicates that combined treatment strategies may yield superior clinical outcomes compared to monotherapy. The aim of this study was to critically compare the efficacy of combining multiple treatment techniques for WSLs compared to using these techniques alone. A systematic search was conducted in PubMed, Scopus, and Cochrane databases according to PRISMA guidelines. The PICO strategy was used to formulate the research question: Which clinical approaches combined or isolated (C) influence the treatment and prevention effectiveness (O) of white spot lesions (I) in humans (P) in the last ten years (T)? Inclusion criteria focused on clinical studies from the last ten years evaluating the combined use of at least two treatment techniques for WSL, resulting in a total of 8 randomized controlled trials selected from an initial pool of 1185 articles. Our results suggest that combined treatment strategies, including resin infiltration with fluoride varnish and ozone therapy combined with fluoride application, demonstrated enhanced efficacy in lesion masking and remineralization compared to single-treatment approaches. CPP-ACP and hydroxyapatite-based creams improved aesthetics, particularly when used alongside fluoride varnish. Our study concluded that the combination of remineralization agents like fluoride gel, infiltrative resins, and antimicrobial treatments offers superior outcomes on white spot lesion treatment than using these techniques alone. However, long-term clinical studies are needed to standardize treatment protocols and confirm durability.
Open AccessWhite Spot Lesion Treatment Options: A Systematic Review of Different Techniques for Masking These Lesions
White spot lesions (WSLs) are early clinical stages of enamel demineralization, often related to orthodontic treatment or poor oral hygiene. The use of gels such as fluoride for topical application inhibits demineralization and promotes remineralization of dental tissues through various mechanisms. A variety of therapeutic approaches are available; however, recent research indicates that combined treatment strategies may yield superior clinical outcomes compared to monotherapy. The aim of this study was to critically compare the efficacy of combining multiple treatment techniques for WSLs compared to using these techniques alone. A systematic search was conducted in PubMed, Scopus, and Cochrane databases according to PRISMA guidelines. The PICO strategy was used to formulate the research question: Which clinical approaches combined or isolated (C) influence the treatment and prevention effectiveness (O) of white spot lesions (I) in humans (P) in the last ten years (T)? Inclusion criteria focused on clinical studies from the last ten years evaluating the combined use of at least two treatment techniques for WSL, resulting in a total of 8 randomized controlled trials selected from an initial pool of 1185 articles. Our results suggest that combined treatment strategies, including resin infiltration with fluoride varnish and ozone therapy combined with fluoride application, demonstrated enhanced efficacy in lesion masking and remineralization compared to single-treatment approaches. CPP-ACP and hydroxyapatite-based creams improved aesthetics, particularly when used alongside fluoride varnish. Our study concluded that the combination of remineralization agents like fluoride gel, infiltrative resins, and antimicrobial treatments offers superior outcomes on white spot lesion treatment than using these techniques alone. However, long-term clinical studies are needed to standardize treatment protocols and confirm durability.
- Open Access
- 15 March 2025
- Published by Springer Nature in Odontology
- Vol. 113 (4) , 1343-1353
Toxicity of resin-matrix composites in a dental clinical setting
The aim of this study was to perform a systematic review to comprehensively explore the factors contributing to the resin-matrix composites′ toxicity in patients. A systematic review was performed according to the PRISMA guidelines. The bibliographic review was performed in the following databases: PubMed, Cochrane Central and Web of Science. Inclusion and exclusion criteria were established to retrieve articles published in English over the last 20 years. The research yielded 1261 articles, with 1227 articles remaining after removing duplicates. Following a title and abstract screening, 20 articles underwent full-text review, and 12 in vivo studies were included. Detectable levels of free monomers and potential toxicity exposure were reported in the selected studies on saliva, urine, and blood samples. The selected in vivo studies suggest relatively low local and systemic toxicity although the available methods show technical limitations and therefore further studies are required. Dental operator-dependent factors were also identified. Standard chair-side guidelines on handling of resin-matrix composites placement plays a key role on the properties of the materials. The results reported noticeable changes in samples were not considered significant to affect patient's health, although, manufacturer’s instructions must be followed whilst using resin-matrix composites. In fact, adequate light curing parameters maintain a high degree of conversion of the resin-matrix composites decreasing the release of residual monomers and thus the probability of related toxicity.
- 15 March 2025
- Published by Springer Nature in Odontology
- Vol. 113 (4) , 1343-1353
Open AccessToxicity of resin-matrix composites in a dental clinical setting
The aim of this study was to perform a systematic review to comprehensively explore the factors contributing to the resin-matrix composites′ toxicity in patients. A systematic review was performed according to the PRISMA guidelines. The bibliographic review was performed in the following databases: PubMed, Cochrane Central and Web of Science. Inclusion and exclusion criteria were established to retrieve articles published in English over the last 20 years. The research yielded 1261 articles, with 1227 articles remaining after removing duplicates. Following a title and abstract screening, 20 articles underwent full-text review, and 12 in vivo studies were included. Detectable levels of free monomers and potential toxicity exposure were reported in the selected studies on saliva, urine, and blood samples. The selected in vivo studies suggest relatively low local and systemic toxicity although the available methods show technical limitations and therefore further studies are required. Dental operator-dependent factors were also identified. Standard chair-side guidelines on handling of resin-matrix composites placement plays a key role on the properties of the materials. The results reported noticeable changes in samples were not considered significant to affect patient's health, although, manufacturer’s instructions must be followed whilst using resin-matrix composites. In fact, adequate light curing parameters maintain a high degree of conversion of the resin-matrix composites decreasing the release of residual monomers and thus the probability of related toxicity.
- Open Access
Fitting of Different Intraradicular Composite Posts to Oval Tooth Root Canals: A Preliminary Assessment
The purpose of the present study was to perform a preliminary analysis of the fitting of different fiber-reinforced composite (GFRC) posts to tooth root canals and determine the resin cement layer thickness. The following GFRC posts were assessed: bundle posts (Rebilda GTTM, VOCO, Germany), sleeve system (SAPTM, Angelus Ind, Brazil), and accessory posts (ReforpinTM, Angelus, Brazil). Twenty-four freshly extracted mandibular single-rooted pre-molars were endodontically treated and divided into six groups, according to the type of GFRC post and resin cement (self-adhesive or conventional dual-cured). Then, specimens were cross-sectioned and inspected by optical microscopy regarding the cement layer thickness and presence of defects such as pores, voids, or fissures were assessed. Bundle and accessory posts revealed a regular distribution of resin cement with a lower number of voids than found with sleeve systems. The sleeve system posts showed poor fitting at the apical portion of the root canals. The type of resin cement did not affect the thickness of the interface, although both bundle and accessory posts allow a better distribution of resin cement and fibers. The present preliminary study reveals interesting insights on the fitting of bundle and accessory posts to root dentin and resin cement layer thickness in oval-shape root canals. The sleeve system posts showed adequate fitting only at the coronal portion of the canals.
Open AccessFitting of Different Intraradicular Composite Posts to Oval Tooth Root Canals: A Preliminary Assessment
The purpose of the present study was to perform a preliminary analysis of the fitting of different fiber-reinforced composite (GFRC) posts to tooth root canals and determine the resin cement layer thickness. The following GFRC posts were assessed: bundle posts (Rebilda GTTM, VOCO, Germany), sleeve system (SAPTM, Angelus Ind, Brazil), and accessory posts (ReforpinTM, Angelus, Brazil). Twenty-four freshly extracted mandibular single-rooted pre-molars were endodontically treated and divided into six groups, according to the type of GFRC post and resin cement (self-adhesive or conventional dual-cured). Then, specimens were cross-sectioned and inspected by optical microscopy regarding the cement layer thickness and presence of defects such as pores, voids, or fissures were assessed. Bundle and accessory posts revealed a regular distribution of resin cement with a lower number of voids than found with sleeve systems. The sleeve system posts showed poor fitting at the apical portion of the root canals. The type of resin cement did not affect the thickness of the interface, although both bundle and accessory posts allow a better distribution of resin cement and fibers. The present preliminary study reveals interesting insights on the fitting of bundle and accessory posts to root dentin and resin cement layer thickness in oval-shape root canals. The sleeve system posts showed adequate fitting only at the coronal portion of the canals.
- Open Access
- 28 December 2023
- Published by Elsevier in Journal of the Mechanical Behavior of Biomedical Materials
- Vol. 151, 106353
Light transmittance through resin-matrix composite onlays adhered to resin-matrix cements or flowable composites
- 28 December 2023
- Published by Elsevier in Journal of the Mechanical Behavior of Biomedical Materials
- Vol. 151, 106353
Open AccessLight transmittance through resin-matrix composite onlays adhered to resin-matrix cements or flowable composites
- 1 December 2023
- Published by Rede Academica das Ciencias da Saude da Lusofonia in RevSALUS - Revista Científica da Rede Académica das Ciências da Saúde da Lusofonia
- Vol. 5 (3)
Accuracy of the electronic method versus the radiographic method in determining working length: integrative systematic review
Introduction: The radiographic method is widely used to calculate the working length (CT). However, it presents limitations that, to overcome them, apical electronic locators (LEAs) were developed to allow greater accuracy and reliability in determining the CT. Objective: The present study aims to perform an integrative systematic review and gather the available scientific evidence on the method that allows greater accuracy in determining the CT between the radiographic method and the electronic localisation method (LEA). Materials and Methods: The literature search was performed on the PubMed platform using keywords combined through the Boolean operator AND as follows: ("endodontics" AND "electronic apex locator" AND "radiographic measurement") and ("endodontics" AND "electronic apex locator" AND "radiographic measurement" AND "odontometry"). Results: 68 articles reporting comparative studies performed between the methods, radiographic and LEA, were identified. Eleven studies were included, of which, in some cases, LEAs showed better results than non-digital periapical radiographs. The studies indicate that although there are differences between the two methods, with greater accuracy in determining LEA, the differences did not prove to be statistically significant. In the presence of irrigating solutions, sodium hypochlorite revealed more significant discrepancies in CT determination with the LEA method. Conclusion: The two methods, radiographic and LEA, should be used in association since each has particularities that present more significant benefits enhancing the success of endodontic treatment and a better and more complete treatment for patients.
- 1 December 2023
- Published by Rede Academica das Ciencias da Saude da Lusofonia in RevSALUS - Revista Científica da Rede Académica das Ciências da Saúde da Lusofonia
- Vol. 5 (3)
Accuracy of the electronic method versus the radiographic method in determining working length: integrative systematic review
Introduction: The radiographic method is widely used to calculate the working length (CT). However, it presents limitations that, to overcome them, apical electronic locators (LEAs) were developed to allow greater accuracy and reliability in determining the CT. Objective: The present study aims to perform an integrative systematic review and gather the available scientific evidence on the method that allows greater accuracy in determining the CT between the radiographic method and the electronic localisation method (LEA). Materials and Methods: The literature search was performed on the PubMed platform using keywords combined through the Boolean operator AND as follows: ("endodontics" AND "electronic apex locator" AND "radiographic measurement") and ("endodontics" AND "electronic apex locator" AND "radiographic measurement" AND "odontometry"). Results: 68 articles reporting comparative studies performed between the methods, radiographic and LEA, were identified. Eleven studies were included, of which, in some cases, LEAs showed better results than non-digital periapical radiographs. The studies indicate that although there are differences between the two methods, with greater accuracy in determining LEA, the differences did not prove to be statistically significant. In the presence of irrigating solutions, sodium hypochlorite revealed more significant discrepancies in CT determination with the LEA method. Conclusion: The two methods, radiographic and LEA, should be used in association since each has particularities that present more significant benefits enhancing the success of endodontic treatment and a better and more complete treatment for patients.
- Open Access
- 7 March 2023
- Published by MDPI AG in Journal of Functional Biomaterials
- Vol. 14 (3) , 148
Microscopic Inspection of the Adhesive Interface of Composite Onlays after Cementation on Low Loading: An In Vitro Study
Purpose: This study aimed to assess the layer thickness and microstructure of traditional resin-matrix cements and flowable resin-matrix composites at dentin and enamel to composite onlay interfaces after cementation on low loading magnitude. Materials and Methods: Twenty teeth were prepared and conditioned with an adhesive system for restoration with resin-matrix composite onlays manufactured by CAD-CAM. On cementation, tooth-to-onlay assemblies were distributed into four groups, including two traditional resin-matrix cements (groups M and B), one flowable resin-matrix composite (group G), and one thermally induced flowable composite (group V). After the cementation procedure, assemblies were cross-sectioned for inspection by optical microscopy at different magnification up to ×1000. Results: The layer thickness of resin-matrix cementation showed the highest mean values at around 405 µm for a traditional resin-matrix cement (group B). The thermally induced flowable resin-matrix composites showed the lowest layer thickness values. The resin-matrix layer thickness revealed statistical differences between traditional resin cement (groups M and B) and flowable resin-matrix composites (groups V and G) (p < 0.05). However, the groups of flowable resin-matrix composites did not reveal statistical differences (p < 0.05). The thickness of the adhesive system layer at around 7 µm and 12 µm was lower at the interfaces with flowable resin-matrix composites when compared to the adhesive layer at resin-matrix cements, which ranged from 12 µm up to 40 µm. Conclusions: The flowable resin-matrix composites showed adequate flowing even though the loading on cementation was performed at low magnitude. Nevertheless, significant variation in thickness of the cementation layer was noticed for flowable resin-matrix composites and traditional resin-matrix cements that can occur in chair-side procedures due to the clinical sensitivity and differences in rheological properties of the materials.
- 7 March 2023
- Published by MDPI AG in Journal of Functional Biomaterials
- Vol. 14 (3) , 148
Open AccessMicroscopic Inspection of the Adhesive Interface of Composite Onlays after Cementation on Low Loading: An In Vitro Study
Purpose: This study aimed to assess the layer thickness and microstructure of traditional resin-matrix cements and flowable resin-matrix composites at dentin and enamel to composite onlay interfaces after cementation on low loading magnitude. Materials and Methods: Twenty teeth were prepared and conditioned with an adhesive system for restoration with resin-matrix composite onlays manufactured by CAD-CAM. On cementation, tooth-to-onlay assemblies were distributed into four groups, including two traditional resin-matrix cements (groups M and B), one flowable resin-matrix composite (group G), and one thermally induced flowable composite (group V). After the cementation procedure, assemblies were cross-sectioned for inspection by optical microscopy at different magnification up to ×1000. Results: The layer thickness of resin-matrix cementation showed the highest mean values at around 405 µm for a traditional resin-matrix cement (group B). The thermally induced flowable resin-matrix composites showed the lowest layer thickness values. The resin-matrix layer thickness revealed statistical differences between traditional resin cement (groups M and B) and flowable resin-matrix composites (groups V and G) (p < 0.05). However, the groups of flowable resin-matrix composites did not reveal statistical differences (p < 0.05). The thickness of the adhesive system layer at around 7 µm and 12 µm was lower at the interfaces with flowable resin-matrix composites when compared to the adhesive layer at resin-matrix cements, which ranged from 12 µm up to 40 µm. Conclusions: The flowable resin-matrix composites showed adequate flowing even though the loading on cementation was performed at low magnitude. Nevertheless, significant variation in thickness of the cementation layer was noticed for flowable resin-matrix composites and traditional resin-matrix cements that can occur in chair-side procedures due to the clinical sensitivity and differences in rheological properties of the materials.
- Open Access
A Scoping Review on the Polymerization of Resin-Matrix Cements Used in Restorative Dentistry
In dentistry, clinicians mainly use dual-cured or light-cured resin-matrix cements to achieve a proper polymerization of the organic matrix leading to enhanced physical properties of the cement. However, several parameters can affect the polymerization of resin-matrix cements. The main aim of the present study was to perform a scoping review on the degree of conversion (DC) of the organic matrix, the polymerization, and the light transmittance of different resin-matrix cements used in dentistry. A search was performed on PubMed using a combination of the following key terms: degree of conversion, resin cements, light transmittance, polymerization, light curing, and thickness. Articles in the English language published up to November 2022 were selected. The selected studies’ results demonstrated that restorative structures with a thickness higher than 1.5 mm decrease the light irradiance towards the resin-matrix cement. A decrease in light transmission provides a low energy absorption through the resin cement leading to a low DC percentage. On the other hand, the highest DC percentages, ranging between 55 and 75%, have been reported for dual-cured resin-matrix cements, although the polymerization mode and exposure time also influence the DC of monomers. Thus, the polymerization of resin-matrix cements can be optimized taking into account different parameters of light-curing, such as adequate light distance, irradiance, exposure time, equipment, and wavelength. Then, optimum physical properties are achieved that provide a long-term clinical performance of the cemented restorative materials.
Open AccessA Scoping Review on the Polymerization of Resin-Matrix Cements Used in Restorative Dentistry
In dentistry, clinicians mainly use dual-cured or light-cured resin-matrix cements to achieve a proper polymerization of the organic matrix leading to enhanced physical properties of the cement. However, several parameters can affect the polymerization of resin-matrix cements. The main aim of the present study was to perform a scoping review on the degree of conversion (DC) of the organic matrix, the polymerization, and the light transmittance of different resin-matrix cements used in dentistry. A search was performed on PubMed using a combination of the following key terms: degree of conversion, resin cements, light transmittance, polymerization, light curing, and thickness. Articles in the English language published up to November 2022 were selected. The selected studies’ results demonstrated that restorative structures with a thickness higher than 1.5 mm decrease the light irradiance towards the resin-matrix cement. A decrease in light transmission provides a low energy absorption through the resin cement leading to a low DC percentage. On the other hand, the highest DC percentages, ranging between 55 and 75%, have been reported for dual-cured resin-matrix cements, although the polymerization mode and exposure time also influence the DC of monomers. Thus, the polymerization of resin-matrix cements can be optimized taking into account different parameters of light-curing, such as adequate light distance, irradiance, exposure time, equipment, and wavelength. Then, optimum physical properties are achieved that provide a long-term clinical performance of the cemented restorative materials.