Marco De Nardi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Marco De Nardi has a total of 121 co-authors. Here are the top co-authors by number of shared publications:
- Alberto Maistrello
Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Corso Stati Uniti 4
8 shared publications - Riccardo Casagrande
Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Corso Stati Uniti 4
8 shared publications - Loris Zanotto
Consorzio RFX (CNR, ENEA, INFN, Universit di Padova, Acciaierie Venete SpA), Padua, Italy
6 shared publications - Marco Bigi
Consorzio RFX (CNR, ENEA, INFN, Universit di Padova, Acciaierie Venete SpA), Padua, Italy
6 shared publications - Mauro Recchia
Consorzio RFX (CNR, ENEA, INFN, Universit di Padova, Acciaierie Venete SpA), Padua, Italy
6 shared publications - Elena Gaio
Consorzio RFX (CNR, ENEA, INFN, Universit di Padova, Acciaierie Venete SpA), Padua, Italy
5 shared publications
Latest Publications
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 54 (11) , 5641-5648
Performance Validation of the First Unit of RF Solid-State Amplifiers for ITER HNB
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 54 (11) , 5641-5648
Performance Validation of the First Unit of RF Solid-State Amplifiers for ITER HNB
- 3 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 54 (6) , 2834-2841
Design and Implementation of Fast Transient Overvoltage Protection Systems for SPIDER Power Supplies
Source for production of ions of deuterium extracted from RF plasma (SPIDER), the full-scale prototype of the ITER ion source operated at the Neutral Beam Test Facility in Padua, Italy, experiences frequent high-voltage breakdowns between accelerator grids, which generate electrical fast transients on the power supply system. These events are driven by the discharge of the electrostatic energy of the high-voltage system through a strongly interconnected power plant and can overstress components, especially under very high breakdown repetition rates. This article investigates two critical issues and presents the design and in-plant validation of dedicated mitigation measures. First, an impulse phase-to-neutral overvoltage on the 6.6kV AC medium-voltage (MV) supply network feeding the ion source and extraction grid (EG) power supplies (ISEPSs) is explained through circuit modeling calibrated on dedicated tests; capacitor-based protection modules installed in the plant reduce the peak below the specified limit and are validated during plant commissioning. Second, accelerator breakdowns produce overvoltage surges at the output of the EG power supply that exceed component ratings when conventional varistor clamps are used. A fully passive semiconductor-based protection with external energy-absorbing resistors is developed, distributed over multiple installation points to share surge currents, and tuned through on-system breakdown testing. The proposed solutions provide practical design and qualification guidelines for robust operation under frequent breakdown conditions.
- 3 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 54 (6) , 2834-2841
Design and Implementation of Fast Transient Overvoltage Protection Systems for SPIDER Power Supplies
Source for production of ions of deuterium extracted from RF plasma (SPIDER), the full-scale prototype of the ITER ion source operated at the Neutral Beam Test Facility in Padua, Italy, experiences frequent high-voltage breakdowns between accelerator grids, which generate electrical fast transients on the power supply system. These events are driven by the discharge of the electrostatic energy of the high-voltage system through a strongly interconnected power plant and can overstress components, especially under very high breakdown repetition rates. This article investigates two critical issues and presents the design and in-plant validation of dedicated mitigation measures. First, an impulse phase-to-neutral overvoltage on the 6.6kV AC medium-voltage (MV) supply network feeding the ion source and extraction grid (EG) power supplies (ISEPSs) is explained through circuit modeling calibrated on dedicated tests; capacitor-based protection modules installed in the plant reduce the peak below the specified limit and are validated during plant commissioning. Second, accelerator breakdowns produce overvoltage surges at the output of the EG power supply that exceed component ratings when conventional varistor clamps are used. A fully passive semiconductor-based protection with external energy-absorbing resistors is developed, distributed over multiple installation points to share surge currents, and tuned through on-system breakdown testing. The proposed solutions provide practical design and qualification guidelines for robust operation under frequent breakdown conditions.
- 12 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 54 (6) , 2780-2786
Operational Space of Solid-State Amplifiers and Matching Network Performance in the NBTF RF System
The Neutral Beam Test Facility (NBTF) plays a crucial role in advancing plasma heating and current drive technologies for International Thermonuclear Experimental Reactor (ITER). It aims to develop and test the high-performance 1-MeV neutral beam injector (MITICA) and its negative-ion source (SPIDER). To achieve the required negative-ion density, each experiment within NBTF employs four radio-frequency (RF) generators that supply as many couples of plasma drivers, for a total rated power of 800 kW at 1 MHz. The RF power supplies are currently being upgraded from tetrode-based oscillators to solid-state amplifiers and are at the final procurement stage. This transition aims to address the instabilities observed during experimentation with the oscillators, which prevented the achievement of nominal power. Solid-state technology is expected to improve the operation of individual RF generators; however, other side effects related to the simultaneous operation of the four units exist. To enhance the operational efficiency and reliability of the new solid-state amplifiers, we conducted an extensive analysis to identify and address potential optimization areas. In particular, this study aims to expand on our previous considerations on mutual coupling among the ion-source RF circuits, which induces oscillations of the impedance seen by the RF generator. This concept emphasizes the importance of precise frequency and phase alignment to optimize power delivery to the load. Given the complexity of achieving this with the existing fixed-elements and narrowband matching network, we explore various strategies to enable effective iso-frequency operation.
- 12 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 54 (6) , 2780-2786
Operational Space of Solid-State Amplifiers and Matching Network Performance in the NBTF RF System
The Neutral Beam Test Facility (NBTF) plays a crucial role in advancing plasma heating and current drive technologies for International Thermonuclear Experimental Reactor (ITER). It aims to develop and test the high-performance 1-MeV neutral beam injector (MITICA) and its negative-ion source (SPIDER). To achieve the required negative-ion density, each experiment within NBTF employs four radio-frequency (RF) generators that supply as many couples of plasma drivers, for a total rated power of 800 kW at 1 MHz. The RF power supplies are currently being upgraded from tetrode-based oscillators to solid-state amplifiers and are at the final procurement stage. This transition aims to address the instabilities observed during experimentation with the oscillators, which prevented the achievement of nominal power. Solid-state technology is expected to improve the operation of individual RF generators; however, other side effects related to the simultaneous operation of the four units exist. To enhance the operational efficiency and reliability of the new solid-state amplifiers, we conducted an extensive analysis to identify and address potential optimization areas. In particular, this study aims to expand on our previous considerations on mutual coupling among the ion-source RF circuits, which induces oscillations of the impedance seen by the RF generator. This concept emphasizes the importance of precise frequency and phase alignment to optimize power delivery to the load. Given the complexity of achieving this with the existing fixed-elements and narrowband matching network, we explore various strategies to enable effective iso-frequency operation.
- 27 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 52 (9) , 4069-4074
Conceptual Design of the DTT ECRH High Voltage Power Supply System
The Divertor Tokamak Test (DTT) facility is a controlled thermonuclear fusion device, whose construction has started at the ENEA Research Center in Frascati, Italy, with the aim to study solutions to mitigate the issue of power exhaust in an integrated environment and operating conditions relevant for future fusion reactors. A power of 45 MW to the plasma is foreseen and provided by a mix of heating and current drive (HCD) systems comprising electron cyclotron resonance heating (ECRH), ion cyclotron resonance heating (ICRH), and neutral beam injector (NBI). DTT, in the first experimental phase, will exploit the ECRH system, including 16 radio frequency (RF) sources (gyrotrons) with potential collector depressed, each rated for 1 MW power, 170 GHz frequency, and 100 s pulse length. The RF sources are fed in pairs by a high voltage power supply (HVPS) set, composed of one main power supply (MPS) and two body power supplies (BPSs), one for each gyrotron, and by low-voltage (LV) power supplies dedicated to the operation of the auxiliaries of the gyrotrons. This work describes the conceptual design of the HVPS system, the evaluation that led to the definition of its main requirements and to the selection of a reference design. In addition, the novel concept is presented for a dummy load (DL) able to mimic the real gyrotrons operation in normal and abnormal conditions for testing an HVPS set.
- 27 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 52 (9) , 4069-4074
Conceptual Design of the DTT ECRH High Voltage Power Supply System
The Divertor Tokamak Test (DTT) facility is a controlled thermonuclear fusion device, whose construction has started at the ENEA Research Center in Frascati, Italy, with the aim to study solutions to mitigate the issue of power exhaust in an integrated environment and operating conditions relevant for future fusion reactors. A power of 45 MW to the plasma is foreseen and provided by a mix of heating and current drive (HCD) systems comprising electron cyclotron resonance heating (ECRH), ion cyclotron resonance heating (ICRH), and neutral beam injector (NBI). DTT, in the first experimental phase, will exploit the ECRH system, including 16 radio frequency (RF) sources (gyrotrons) with potential collector depressed, each rated for 1 MW power, 170 GHz frequency, and 100 s pulse length. The RF sources are fed in pairs by a high voltage power supply (HVPS) set, composed of one main power supply (MPS) and two body power supplies (BPSs), one for each gyrotron, and by low-voltage (LV) power supplies dedicated to the operation of the auxiliaries of the gyrotrons. This work describes the conceptual design of the HVPS system, the evaluation that led to the definition of its main requirements and to the selection of a reference design. In addition, the novel concept is presented for a dummy load (DL) able to mimic the real gyrotrons operation in normal and abnormal conditions for testing an HVPS set.
- 21 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 52 (9) , 3970-3977
Overview on the Applicability of the ITER/NPP-Like Technologies to the DEMO Plant Electrical System and Promising Alternatives
The Plant Electrical System (PES) of the European DEMOnstration fusion power plant (DEMO), presently under conceptual design, shall supply power to the loads and deliver net power to the Power Transmission Grid (PTG). Starting from the available requirements, the applicability to DEMO PES of the technologies and design approaches adopted in ITER and nuclear power plants (NPP) has been evaluated. This article presents the results of the survey and proposes alternative solutions to deal with the identified criticalities.
- 21 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 52 (9) , 3970-3977
Overview on the Applicability of the ITER/NPP-Like Technologies to the DEMO Plant Electrical System and Promising Alternatives
The Plant Electrical System (PES) of the European DEMOnstration fusion power plant (DEMO), presently under conceptual design, shall supply power to the loads and deliver net power to the Power Transmission Grid (PTG). Starting from the available requirements, the applicability to DEMO PES of the technologies and design approaches adopted in ITER and nuclear power plants (NPP) has been evaluated. This article presents the results of the survey and proposes alternative solutions to deal with the identified criticalities.
- 20 January 2023
- Published by Elsevier in Fusion Engineering and Design
- Vol. 189
Special tests on the first unit of the solid-state RF amplifiers for the ITER HNB and the NBTF experiments
- 20 January 2023
- Published by Elsevier in Fusion Engineering and Design
- Vol. 189
Special tests on the first unit of the solid-state RF amplifiers for the ITER HNB and the NBTF experiments
- 20 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 51 (3) , 927-935
SPIDER, the Negative Ion Source Prototype for ITER: Overview of Operations and Cesium Injection
An overview of the recent operations and the main results of cesium injection in the Source for the Production of Ions of Deuterium Extracted from Rf plasma (SPIDER) negative ion source are described in this contribution. In experiments without cesium injection, all SPIDER plants were tested to verify the basic expectations on the operational parameters (e.g., electron cooling effectiveness of magnetic filter field) and to determine its operational region. For beam properties, it was shown that the current density varies across the beam in the vertical direction. In preliminary cesium experiments, the expected increase of negative ion current and simultaneous decrease of co-extracted electrons were found, along with the influence of the control parameters (polarization of the plasma electrodes, magnetic filter field) on the SPIDER beam uniformity in the horizontal and vertical directions. It was shown that non-Gaussian tails can be identified in the angular distribution on the plane perpendicular to the beam propagation direction. Stray particles, nonhomogeneous beam and large divergence might result in unexpected heat and particle loads over ITER neutral beam injector (NBI) accelerator grids; it is the goal of SPIDER to assess and possibly to identify suitable methods for controlling these beam features. A major shutdown, planned for late 2021, to solve the issues identified during the operation and to carry out scheduled modifications, is outlined. Such improvements are expected to allow SPIDER to pursue the ITER requirements in terms of negative ion current, electron-to-ion ratio, and beam duration.
- 20 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 51 (3) , 927-935
SPIDER, the Negative Ion Source Prototype for ITER: Overview of Operations and Cesium Injection
An overview of the recent operations and the main results of cesium injection in the Source for the Production of Ions of Deuterium Extracted from Rf plasma (SPIDER) negative ion source are described in this contribution. In experiments without cesium injection, all SPIDER plants were tested to verify the basic expectations on the operational parameters (e.g., electron cooling effectiveness of magnetic filter field) and to determine its operational region. For beam properties, it was shown that the current density varies across the beam in the vertical direction. In preliminary cesium experiments, the expected increase of negative ion current and simultaneous decrease of co-extracted electrons were found, along with the influence of the control parameters (polarization of the plasma electrodes, magnetic filter field) on the SPIDER beam uniformity in the horizontal and vertical directions. It was shown that non-Gaussian tails can be identified in the angular distribution on the plane perpendicular to the beam propagation direction. Stray particles, nonhomogeneous beam and large divergence might result in unexpected heat and particle loads over ITER neutral beam injector (NBI) accelerator grids; it is the goal of SPIDER to assess and possibly to identify suitable methods for controlling these beam features. A major shutdown, planned for late 2021, to solve the issues identified during the operation and to carry out scheduled modifications, is outlined. Such improvements are expected to allow SPIDER to pursue the ITER requirements in terms of negative ion current, electron-to-ion ratio, and beam duration.
- Open Access
- 20 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (11) , 4039-4046
Studies on Alternative Schemes for the MMC-Based Acceleration Grid Power Supply of DEMO Neutral Beam Injector
The European DEMO will make use of a significant additional heating power, which could be partly provided by neutral beam injectors (NBIs), which accelerate negative ions by means of grids placed at increasing potentials. These grids will be fed by the acceleration grid power supply (AGPS), divided in a number of stages, which has to provide an overall dc voltage down to $-$ 1 MV and currents in the order of tens of Amperes. The AGPS will have to satisfy a set of static and dynamic requirements, mainly in terms of ripple, accuracy, and rise time. In addition, during the NBI operation, frequent losses of insulation between the grids, called breakdowns (BDs), are expected. The AGPS will be able to handle such events by nullifying the output currents as fast as possible in order to limit the energy discharged onto the grids. Adopting the modular multilevel converter (MMC) technology for the AGPS of DEMO and future tokamaks seems promising, due to its intrinsic properties of modularity, high efficiency, fast dynamic response and small energy transferred to the arc in case of BD. Since the converter will be air-insulated, one of the main drawbacks is the large volume occupied. This can be partly reduced by adopting alternative MMC schemes, to minimize the number of components and optimize the counter-voltage applied by the converter at BD. In this article, alternative topologies for the MMC submodules (SMs) or combinations of different schemes full-bridge (FB), half-bridge (HB) are investigated. After a preliminary design of the converter, the results of numerical simulations carried out with circuit models are shown, with control schemes customized for the NBI operation. The performance of the different solutions in steady-state, dynamic and anomalous conditions are discussed, with particular focus on BD events. Finally, thermal analyses on the converter are carried out, to verify whether natural convection of air can be a suitable cooling method for the power components.
- 20 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (11) , 4039-4046
Open AccessStudies on Alternative Schemes for the MMC-Based Acceleration Grid Power Supply of DEMO Neutral Beam Injector
The European DEMO will make use of a significant additional heating power, which could be partly provided by neutral beam injectors (NBIs), which accelerate negative ions by means of grids placed at increasing potentials. These grids will be fed by the acceleration grid power supply (AGPS), divided in a number of stages, which has to provide an overall dc voltage down to $-$ 1 MV and currents in the order of tens of Amperes. The AGPS will have to satisfy a set of static and dynamic requirements, mainly in terms of ripple, accuracy, and rise time. In addition, during the NBI operation, frequent losses of insulation between the grids, called breakdowns (BDs), are expected. The AGPS will be able to handle such events by nullifying the output currents as fast as possible in order to limit the energy discharged onto the grids. Adopting the modular multilevel converter (MMC) technology for the AGPS of DEMO and future tokamaks seems promising, due to its intrinsic properties of modularity, high efficiency, fast dynamic response and small energy transferred to the arc in case of BD. Since the converter will be air-insulated, one of the main drawbacks is the large volume occupied. This can be partly reduced by adopting alternative MMC schemes, to minimize the number of components and optimize the counter-voltage applied by the converter at BD. In this article, alternative topologies for the MMC submodules (SMs) or combinations of different schemes full-bridge (FB), half-bridge (HB) are investigated. After a preliminary design of the converter, the results of numerical simulations carried out with circuit models are shown, with control schemes customized for the NBI operation. The performance of the different solutions in steady-state, dynamic and anomalous conditions are discussed, with particular focus on BD events. Finally, thermal analyses on the converter are carried out, to verify whether natural convection of air can be a suitable cooling method for the power components.
- Open Access
- 8 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (11) , 3977-3982
RF Stray Currents in SPIDER Power Circuits: Model Assessment and Experimental Results
The ITER Neutral Beam Test Facility (NBTF), Padua, Italy, hosts two different experiments: Source for Production of Ion of Deuterium Extracted from Rf plasma (SPIDER), the prototype of the ion source (IS) of ITER neutral beam injector (NBI), and Megavolt ITER Injector and Concept Advancement (MITICA), the prototype of the ITER NBI. The ISs of SPIDER and MITICA are driven by radio frequency (RF) power, for a total of 800 kW at 1 MHz. The RF power is delivered to the inductively coupled plasma drivers of the IS by four tetrode oscillators. Operation of SPIDER at high power pointed out the presence of RF stray currents circulating in the electric system. These currents hinder the correct operation of the system, causing damage to its components. To improve the comprehension of the issue, after an overall circuital investigation and the identification of a possible reclosing path for the RF stray currents, a simplified model of SPIDER electric system was developed, initially focusing on a single RF circuit. The aim of the work presented in this article is to extend the model to four RF circuits, to study the impact of their mutual coupling and of the common potential references on RF stray currents magnitude, with a view to improve the comprehension of the issue and the effect of the provisions to mitigate it. The results obtained with this model are compared to SPIDER experimental measurements for validation.
- 8 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (11) , 3977-3982
Open AccessRF Stray Currents in SPIDER Power Circuits: Model Assessment and Experimental Results
The ITER Neutral Beam Test Facility (NBTF), Padua, Italy, hosts two different experiments: Source for Production of Ion of Deuterium Extracted from Rf plasma (SPIDER), the prototype of the ion source (IS) of ITER neutral beam injector (NBI), and Megavolt ITER Injector and Concept Advancement (MITICA), the prototype of the ITER NBI. The ISs of SPIDER and MITICA are driven by radio frequency (RF) power, for a total of 800 kW at 1 MHz. The RF power is delivered to the inductively coupled plasma drivers of the IS by four tetrode oscillators. Operation of SPIDER at high power pointed out the presence of RF stray currents circulating in the electric system. These currents hinder the correct operation of the system, causing damage to its components. To improve the comprehension of the issue, after an overall circuital investigation and the identification of a possible reclosing path for the RF stray currents, a simplified model of SPIDER electric system was developed, initially focusing on a single RF circuit. The aim of the work presented in this article is to extend the model to four RF circuits, to study the impact of their mutual coupling and of the common potential references on RF stray currents magnitude, with a view to improve the comprehension of the issue and the effect of the provisions to mitigate it. The results obtained with this model are compared to SPIDER experimental measurements for validation.
- 10 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (11) , 3970-3976
Radio Frequency Generators Based on Solid State Amplifiers for the NBTF and ITER Projects
The article will present and discuss the issues found in Source for Production of Ion of Deuterium Extracted from RF plasma (SPIDER) experiment with the operation of the radio frequency (RF) generators based on self-excited tetrode oscillators and the advantages expected from their replacement with RF solid-state amplifiers. The assessment of the solution based on new solid-state amplifiers for both SPIDER and Megavolt ITER Injector and Concept Advancement (MITICA) experiments operating in Padua, Italy, in the Neutral Beam Test Facility, will be described, outlining the main design challenges and open points.
- 10 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (11) , 3970-3976
Radio Frequency Generators Based on Solid State Amplifiers for the NBTF and ITER Projects
The article will present and discuss the issues found in Source for Production of Ion of Deuterium Extracted from RF plasma (SPIDER) experiment with the operation of the radio frequency (RF) generators based on self-excited tetrode oscillators and the advantages expected from their replacement with RF solid-state amplifiers. The assessment of the solution based on new solid-state amplifiers for both SPIDER and Megavolt ITER Injector and Concept Advancement (MITICA) experiments operating in Padua, Italy, in the Neutral Beam Test Facility, will be described, outlining the main design challenges and open points.